1 /*
2  *  Copyright (C) 2015 Samsung Electronics
3  *  Przemyslaw Marczak  <p.marczak@samsung.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <fdtdec.h>
10 #include <errno.h>
11 #include <dm.h>
12 #include <i2c.h>
13 #include <power/pmic.h>
14 #include <power/regulator.h>
15 #include <power/sandbox_pmic.h>
16 
17 DECLARE_GLOBAL_DATA_PTR;
18 
19 #define MODE(_id, _val, _name) [_id] = {  \
20 	.id = _id,                \
21 	.register_value = _val,   \
22 	.name = _name,            \
23 }
24 
25 #define RANGE(_min, _max, _step) { \
26 	.min = _min,               \
27 	.max = _max,               \
28 	.step = _step,             \
29 }
30 
31 /*
32  * struct output_range - helper structure type to define the range of output
33  * operating values (current/voltage), limited by the PMIC IC design.
34  *
35  * @min  - minimum value
36  * @max  - maximum value
37  * @step - step value
38 */
39 struct output_range {
40 	int min;
41 	int max;
42 	int step;
43 };
44 
45 /* BUCK: 1,2 - voltage range */
46 static struct output_range buck_voltage_range[] = {
47 	RANGE(OUT_BUCK1_UV_MIN, OUT_BUCK1_UV_MAX, OUT_BUCK1_UV_STEP),
48 	RANGE(OUT_BUCK2_UV_MIN, OUT_BUCK2_UV_MAX, OUT_BUCK2_UV_STEP),
49 };
50 
51 /* BUCK: 1 - current range */
52 static struct output_range buck_current_range[] = {
53 	RANGE(OUT_BUCK1_UA_MIN, OUT_BUCK1_UA_MAX, OUT_BUCK1_UA_STEP),
54 };
55 
56 /* BUCK operating modes */
57 static struct dm_regulator_mode sandbox_buck_modes[] = {
58 	MODE(BUCK_OM_OFF, OM2REG(BUCK_OM_OFF), "OFF"),
59 	MODE(BUCK_OM_ON, OM2REG(BUCK_OM_ON), "ON"),
60 	MODE(BUCK_OM_PWM, OM2REG(BUCK_OM_PWM), "PWM"),
61 };
62 
63 /* LDO: 1,2 - voltage range */
64 static struct output_range ldo_voltage_range[] = {
65 	RANGE(OUT_LDO1_UV_MIN, OUT_LDO1_UV_MAX, OUT_LDO1_UV_STEP),
66 	RANGE(OUT_LDO2_UV_MIN, OUT_LDO2_UV_MAX, OUT_LDO2_UV_STEP),
67 };
68 
69 /* LDO: 1 - current range */
70 static struct output_range ldo_current_range[] = {
71 	RANGE(OUT_LDO1_UA_MIN, OUT_LDO1_UA_MAX, OUT_LDO1_UA_STEP),
72 };
73 
74 /* LDO operating modes */
75 static struct dm_regulator_mode sandbox_ldo_modes[] = {
76 	MODE(LDO_OM_OFF, OM2REG(LDO_OM_OFF), "OFF"),
77 	MODE(LDO_OM_ON, OM2REG(LDO_OM_ON), "ON"),
78 	MODE(LDO_OM_SLEEP, OM2REG(LDO_OM_SLEEP), "SLEEP"),
79 	MODE(LDO_OM_STANDBY, OM2REG(LDO_OM_STANDBY), "STANDBY"),
80 };
81 
82 int out_get_value(struct udevice *dev, int output_count, int reg_type,
83 		  struct output_range *range)
84 {
85 	uint8_t reg_val;
86 	uint reg;
87 	int ret;
88 
89 	if (dev->driver_data > output_count) {
90 		error("Unknown regulator number: %lu for PMIC %s!",
91 		      dev->driver_data, dev->name);
92 		return -EINVAL;
93 	}
94 
95 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
96 	ret = pmic_read(dev->parent, reg, &reg_val, 1);
97 	if (ret) {
98 		error("PMIC read failed: %d\n",  ret);
99 		return ret;
100 	}
101 
102 	ret =  REG2VAL(range[dev->driver_data - 1].min,
103 		       range[dev->driver_data - 1].step,
104 		       reg_val);
105 
106 	return ret;
107 }
108 
109 static int out_set_value(struct udevice *dev, int output_count, int reg_type,
110 			 struct output_range *range, int value)
111 {
112 	uint8_t reg_val;
113 	uint reg;
114 	int ret;
115 	int max_value;
116 
117 	if (dev->driver_data > output_count) {
118 		error("Unknown regulator number: %lu for PMIC %s!",
119 		      dev->driver_data, dev->name);
120 		return -EINVAL;
121 	}
122 
123 	max_value = range[dev->driver_data - 1].max;
124 	if (value > max_value) {
125 		error("Wrong value for %s: %lu. Max is: %d.",
126 		      dev->name, dev->driver_data, max_value);
127 		return -EINVAL;
128 	}
129 
130 	reg_val = VAL2REG(range[dev->driver_data - 1].min,
131 			  range[dev->driver_data - 1].step,
132 			  value);
133 
134 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
135 	ret = pmic_write(dev->parent, reg, &reg_val, 1);
136 	if (ret) {
137 		error("PMIC write failed: %d\n",  ret);
138 		return ret;
139 	}
140 
141 	return 0;
142 }
143 
144 static int out_get_mode(struct udevice *dev)
145 {
146 	struct dm_regulator_uclass_platdata *uc_pdata;
147 	uint8_t reg_val;
148 	uint reg;
149 	int ret;
150 	int i;
151 
152 	uc_pdata = dev_get_uclass_platdata(dev);
153 
154 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
155 	ret = pmic_read(dev->parent, reg, &reg_val, 1);
156 	if (ret) {
157 		error("PMIC read failed: %d\n",  ret);
158 		return ret;
159 	}
160 
161 	for (i = 0; i < uc_pdata->mode_count; i++) {
162 		if (reg_val == uc_pdata->mode[i].register_value)
163 			return uc_pdata->mode[i].id;
164 	}
165 
166 	error("Unknown operation mode for %s!", dev->name);
167 	return -EINVAL;
168 }
169 
170 static int out_set_mode(struct udevice *dev, int mode)
171 {
172 	struct dm_regulator_uclass_platdata *uc_pdata;
173 	int reg_val = -1;
174 	uint reg;
175 	int ret;
176 	int i;
177 
178 	uc_pdata = dev_get_uclass_platdata(dev);
179 
180 	if (mode >= uc_pdata->mode_count)
181 		return -EINVAL;
182 
183 	for (i = 0; i < uc_pdata->mode_count; i++) {
184 		if (mode == uc_pdata->mode[i].id) {
185 			reg_val = uc_pdata->mode[i].register_value;
186 			break;
187 		}
188 	}
189 
190 	if (reg_val == -1) {
191 		error("Unknown operation mode for %s!", dev->name);
192 		return -EINVAL;
193 	}
194 
195 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
196 	ret = pmic_write(dev->parent, reg, (uint8_t *)&reg_val, 1);
197 	if (ret) {
198 		error("PMIC write failed: %d\n",  ret);
199 		return ret;
200 	}
201 
202 	return 0;
203 }
204 
205 static int buck_get_voltage(struct udevice *dev)
206 {
207 	return out_get_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UV,
208 			      buck_voltage_range);
209 }
210 
211 static int buck_set_voltage(struct udevice *dev, int uV)
212 {
213 	return out_set_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UV,
214 			      buck_voltage_range, uV);
215 }
216 
217 static int buck_get_current(struct udevice *dev)
218 {
219 	/* BUCK2 - unsupported */
220 	if (dev->driver_data == 2)
221 		return -ENOSYS;
222 
223 	return out_get_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UA,
224 			      buck_current_range);
225 }
226 
227 static int buck_set_current(struct udevice *dev, int uA)
228 {
229 	/* BUCK2 - unsupported */
230 	if (dev->driver_data == 2)
231 		return -ENOSYS;
232 
233 	return out_set_value(dev, SANDBOX_BUCK_COUNT, OUT_REG_UA,
234 			      buck_current_range, uA);
235 }
236 
237 static int buck_get_enable(struct udevice *dev)
238 {
239 	if (out_get_mode(dev) == BUCK_OM_OFF)
240 		return false;
241 
242 	return true;
243 }
244 
245 static int buck_set_enable(struct udevice *dev, bool enable)
246 {
247 	return out_set_mode(dev, enable ? BUCK_OM_ON : BUCK_OM_OFF);
248 }
249 
250 static int sandbox_buck_probe(struct udevice *dev)
251 {
252 	struct dm_regulator_uclass_platdata *uc_pdata;
253 
254 	uc_pdata = dev_get_uclass_platdata(dev);
255 
256 	uc_pdata->type = REGULATOR_TYPE_BUCK;
257 	uc_pdata->mode = sandbox_buck_modes;
258 	uc_pdata->mode_count = ARRAY_SIZE(sandbox_buck_modes);
259 
260 	return 0;
261 }
262 
263 static const struct dm_regulator_ops sandbox_buck_ops = {
264 	.get_value   = buck_get_voltage,
265 	.set_value   = buck_set_voltage,
266 	.get_current = buck_get_current,
267 	.set_current = buck_set_current,
268 	.get_enable  = buck_get_enable,
269 	.set_enable  = buck_set_enable,
270 	.get_mode    = out_get_mode,
271 	.set_mode    = out_set_mode,
272 };
273 
274 U_BOOT_DRIVER(sandbox_buck) = {
275 	.name = SANDBOX_BUCK_DRIVER,
276 	.id = UCLASS_REGULATOR,
277 	.ops = &sandbox_buck_ops,
278 	.probe = sandbox_buck_probe,
279 };
280 
281 static int ldo_get_voltage(struct udevice *dev)
282 {
283 	return out_get_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UV,
284 			     ldo_voltage_range);
285 }
286 
287 static int ldo_set_voltage(struct udevice *dev, int uV)
288 {
289 	return out_set_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UV,
290 			     ldo_voltage_range, uV);
291 }
292 
293 static int ldo_get_current(struct udevice *dev)
294 {
295 	/* LDO2 - unsupported */
296 	if (dev->driver_data == 2)
297 		return -ENOSYS;
298 
299 	return out_get_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UA,
300 			     ldo_current_range);
301 }
302 
303 static int ldo_set_current(struct udevice *dev, int uA)
304 {
305 	/* LDO2 - unsupported */
306 	if (dev->driver_data == 2)
307 		return -ENOSYS;
308 
309 	return out_set_value(dev, SANDBOX_LDO_COUNT, OUT_REG_UA,
310 			     ldo_current_range, uA);
311 }
312 
313 static int ldo_get_enable(struct udevice *dev)
314 {
315 	if (out_get_mode(dev) == LDO_OM_OFF)
316 		return false;
317 
318 	return true;
319 }
320 
321 static int ldo_set_enable(struct udevice *dev, bool enable)
322 {
323 	return out_set_mode(dev, enable ? LDO_OM_ON : LDO_OM_OFF);
324 }
325 
326 static int sandbox_ldo_probe(struct udevice *dev)
327 {
328 	struct dm_regulator_uclass_platdata *uc_pdata;
329 
330 	uc_pdata = dev_get_uclass_platdata(dev);
331 
332 	uc_pdata->type = REGULATOR_TYPE_LDO;
333 	uc_pdata->mode = sandbox_ldo_modes;
334 	uc_pdata->mode_count = ARRAY_SIZE(sandbox_ldo_modes);
335 
336 	return 0;
337 }
338 
339 static const struct dm_regulator_ops sandbox_ldo_ops = {
340 	.get_value   = ldo_get_voltage,
341 	.set_value   = ldo_set_voltage,
342 	.get_current = ldo_get_current,
343 	.set_current = ldo_set_current,
344 	.get_enable  = ldo_get_enable,
345 	.set_enable  = ldo_set_enable,
346 	.get_mode    = out_get_mode,
347 	.set_mode    = out_set_mode,
348 };
349 
350 U_BOOT_DRIVER(sandbox_ldo) = {
351 	.name = SANDBOX_LDO_DRIVER,
352 	.id = UCLASS_REGULATOR,
353 	.ops = &sandbox_ldo_ops,
354 	.probe = sandbox_ldo_probe,
355 };
356