1config DM_PMIC 2 bool "Enable Driver Model for PMIC drivers (UCLASS_PMIC)" 3 depends on DM 4 ---help--- 5 This config enables the driver-model PMIC support. 6 UCLASS_PMIC - designed to provide an I/O interface for PMIC devices. 7 For the multi-function PMIC devices, this can be used as parent I/O 8 device for each IC's interface. Then, each children uses its parent 9 for read/write. For detailed description, please refer to the files: 10 - 'drivers/power/pmic/pmic-uclass.c' 11 - 'include/power/pmic.h' 12 13config PMIC_CHILDREN 14 bool "Allow child devices for PMICs" 15 depends on DM_PMIC 16 default y 17 ---help--- 18 This allows PMICs to support child devices (such as regulators) in 19 SPL. This adds quite a bit of code so if you are not using this 20 feature you can turn it off. Most likely you should turn it on for 21 U-Boot proper. 22 23config SPL_PMIC_CHILDREN 24 bool "Allow child devices for PMICs in SPL" 25 depends on DM_PMIC 26 default y 27 ---help--- 28 This allows PMICs to support child devices (such as regulators) in 29 SPL. This adds quite a bit of code so if you are not using this 30 feature you can turn it off. In this case you may need a 'back door' 31 to call your regulator code (e.g. see rk808.c for direct functions 32 for use in SPL). 33 34config PMIC_ACT8846 35 bool "Enable support for the active-semi 8846 PMIC" 36 depends on DM_PMIC && DM_I2C 37 ---help--- 38 This PMIC includes 4 DC/DC step-down buck regulators and 8 low-dropout 39 regulators (LDOs). It also provides some GPIO, reset and battery 40 functions. It uses an I2C interface and is designed for use with 41 tablets and smartphones. 42 43config DM_PMIC_PFUZE100 44 bool "Enable Driver Model for PMIC PFUZE100" 45 depends on DM_PMIC 46 ---help--- 47 This config enables implementation of driver-model pmic uclass features 48 for PMIC PFUZE100. The driver implements read/write operations. 49 50config DM_PMIC_MAX77686 51 bool "Enable Driver Model for PMIC MAX77686" 52 depends on DM_PMIC 53 ---help--- 54 This config enables implementation of driver-model pmic uclass features 55 for PMIC MAX77686. The driver implements read/write operations. 56 57config PMIC_PM8916 58 bool "Enable Driver Model for Qualcomm PM8916 PMIC" 59 depends on DM_PMIC 60 ---help--- 61 The PM8916 is a PMIC connected to one (or several) processors 62 with SPMI bus. It has 2 slaves with several peripherals: 63 - 18x LDO 64 - 4x GPIO 65 - Power and Reset buttons 66 - Watchdog 67 - RTC 68 - Vibrator drivers 69 - Others 70 71 Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt 72 73config PMIC_RK808 74 bool "Enable support for Rockchip PMIC RK808" 75 depends on DM_PMIC 76 ---help--- 77 The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, 78 an RTC and two low Rds (resistance (drain to source)) switches. It is 79 accessed via an I2C interface. The device is used with Rockchip SoCs. 80 This driver implements register read/write operations. 81 82config PMIC_S2MPS11 83 bool "Enable Driver Model for PMIC Samsung S2MPS11" 84 depends on DM_PMIC 85 ---help--- 86 The Samsung S2MPS11 PMIC provides: 87 - 38 adjustable LDO regulators 88 - 9 High-Efficiency Buck Converters 89 - 1 BuckBoost Converter 90 - RTC with two alarms 91 - Backup battery charger 92 - I2C Configuration Interface 93 This driver provides access to I/O interface only. 94 Binding info: doc/device-tree-bindings/pmic/s2mps11.txt 95 96config DM_PMIC_SANDBOX 97 bool "Enable Driver Model for emulated Sandbox PMIC " 98 depends on DM_PMIC 99 ---help--- 100 Enable the driver for Sandbox PMIC emulation. The emulated PMIC device 101 depends on two drivers: 102 - sandbox PMIC I/O driver - implements dm pmic operations 103 - sandbox PMIC i2c emul driver - emulates the PMIC's I2C transmission 104 105 A detailed information can be found in header: '<power/sandbox_pmic.h>' 106 107 The Sandbox PMIC info: 108 * I/O interface: 109 - I2C chip address: 0x40 110 - first register address: 0x0 111 - register count: 0x10 112 * Adjustable outputs: 113 - 2x LDO 114 - 2x BUCK 115 - Each, with a different operating conditions (header). 116 * Reset values: 117 - set by i2c emul driver's probe() (defaults in header) 118 119 Driver binding info: doc/device-tree-bindings/pmic/sandbox.txt 120 121config PMIC_S5M8767 122 bool "Enable Driver Model for the Samsung S5M8767 PMIC" 123 depends on DM_PMIC 124 ---help--- 125 The S5M8767 PMIC provides a large array of LDOs and BUCKs for use 126 as a SoC power controller. It also provides 32KHz clock outputs. This 127 driver provides basic register access and sets up the attached 128 regulators if regulator support is enabled. 129 130config PMIC_RN5T567 131 bool "Enable driver for Ricoh RN5T567 PMIC" 132 depends on DM_PMIC 133 ---help--- 134 The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO 135 regulators Real-Time Clock and 4 GPIOs. This driver provides 136 register access only. 137 138config PMIC_TPS65090 139 bool "Enable driver for Texas Instruments TPS65090 PMIC" 140 depends on DM_PMIC 141 ---help--- 142 The TPS65090 is a PMIC containing several LDOs, DC to DC convertors, 143 FETs and a battery charger. This driver provides register access 144 only, and you can enable the regulator/charger drivers separately if 145 required. 146 147config PMIC_PALMAS 148 bool "Enable driver for Texas Instruments PALMAS PMIC" 149 depends on DM_PMIC 150 ---help--- 151 The PALMAS is a PMIC containing several LDOs, SMPS. 152 This driver binds the pmic children. 153 154config PMIC_LP873X 155 bool "Enable driver for Texas Instruments LP873X PMIC" 156 depends on DM_PMIC 157 ---help--- 158 The LP873X is a PMIC containing couple of LDOs and couple of SMPS. 159 This driver binds the pmic children. 160