1config DM_PMIC 2 bool "Enable Driver Model for PMIC drivers (UCLASS_PMIC)" 3 depends on DM 4 ---help--- 5 This config enables the driver-model PMIC support. 6 UCLASS_PMIC - designed to provide an I/O interface for PMIC devices. 7 For the multi-function PMIC devices, this can be used as parent I/O 8 device for each IC's interface. Then, each children uses its parent 9 for read/write. For detailed description, please refer to the files: 10 - 'drivers/power/pmic/pmic-uclass.c' 11 - 'include/power/pmic.h' 12 13config PMIC_CHILDREN 14 bool "Allow child devices for PMICs" 15 depends on DM_PMIC 16 default y 17 ---help--- 18 This allows PMICs to support child devices (such as regulators) in 19 SPL. This adds quite a bit of code so if you are not using this 20 feature you can turn it off. Most likely you should turn it on for 21 U-Boot proper. 22 23config SPL_PMIC_CHILDREN 24 bool "Allow child devices for PMICs in SPL" 25 depends on DM_PMIC 26 default y 27 ---help--- 28 This allows PMICs to support child devices (such as regulators) in 29 SPL. This adds quite a bit of code so if you are not using this 30 feature you can turn it off. In this case you may need a 'back door' 31 to call your regulator code (e.g. see rk808.c for direct functions 32 for use in SPL). 33 34config PMIC_ACT8846 35 bool "Enable support for the active-semi 8846 PMIC" 36 depends on DM_PMIC && DM_I2C 37 ---help--- 38 This PMIC includes 4 DC/DC step-down buck regulators and 8 low-dropout 39 regulators (LDOs). It also provides some GPIO, reset and battery 40 functions. It uses an I2C interface and is designed for use with 41 tablets and smartphones. 42 43config DM_PMIC_PFUZE100 44 bool "Enable Driver Model for PMIC PFUZE100" 45 depends on DM_PMIC 46 ---help--- 47 This config enables implementation of driver-model pmic uclass features 48 for PMIC PFUZE100. The driver implements read/write operations. 49 50config DM_PMIC_MAX77686 51 bool "Enable Driver Model for PMIC MAX77686" 52 depends on DM_PMIC 53 ---help--- 54 This config enables implementation of driver-model pmic uclass features 55 for PMIC MAX77686. The driver implements read/write operations. 56 57config DM_PMIC_MAX8998 58 bool "Enable Driver Model for PMIC MAX8998" 59 depends on DM_PMIC 60 ---help--- 61 This config enables implementation of driver-model pmic uclass features 62 for PMIC MAX8998. The driver implements read/write operations. 63 64config PMIC_PM8916 65 bool "Enable Driver Model for Qualcomm PM8916 PMIC" 66 depends on DM_PMIC 67 ---help--- 68 The PM8916 is a PMIC connected to one (or several) processors 69 with SPMI bus. It has 2 slaves with several peripherals: 70 - 18x LDO 71 - 4x GPIO 72 - Power and Reset buttons 73 - Watchdog 74 - RTC 75 - Vibrator drivers 76 - Others 77 78 Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt 79 80config PMIC_RK808 81 bool "Enable support for Rockchip PMIC RK808" 82 depends on DM_PMIC 83 ---help--- 84 The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, 85 an RTC and two low Rds (resistance (drain to source)) switches. It is 86 accessed via an I2C interface. The device is used with Rockchip SoCs. 87 This driver implements register read/write operations. 88 89config PMIC_S2MPS11 90 bool "Enable Driver Model for PMIC Samsung S2MPS11" 91 depends on DM_PMIC 92 ---help--- 93 The Samsung S2MPS11 PMIC provides: 94 - 38 adjustable LDO regulators 95 - 9 High-Efficiency Buck Converters 96 - 1 BuckBoost Converter 97 - RTC with two alarms 98 - Backup battery charger 99 - I2C Configuration Interface 100 This driver provides access to I/O interface only. 101 Binding info: doc/device-tree-bindings/pmic/s2mps11.txt 102 103config DM_PMIC_SANDBOX 104 bool "Enable Driver Model for emulated Sandbox PMIC " 105 depends on DM_PMIC 106 ---help--- 107 Enable the driver for Sandbox PMIC emulation. The emulated PMIC device 108 depends on two drivers: 109 - sandbox PMIC I/O driver - implements dm pmic operations 110 - sandbox PMIC i2c emul driver - emulates the PMIC's I2C transmission 111 112 A detailed information can be found in header: '<power/sandbox_pmic.h>' 113 114 The Sandbox PMIC info: 115 * I/O interface: 116 - I2C chip address: 0x40 117 - first register address: 0x0 118 - register count: 0x10 119 * Adjustable outputs: 120 - 2x LDO 121 - 2x BUCK 122 - Each, with a different operating conditions (header). 123 * Reset values: 124 - set by i2c emul driver's probe() (defaults in header) 125 126 Driver binding info: doc/device-tree-bindings/pmic/sandbox.txt 127 128config PMIC_S5M8767 129 bool "Enable Driver Model for the Samsung S5M8767 PMIC" 130 depends on DM_PMIC 131 ---help--- 132 The S5M8767 PMIC provides a large array of LDOs and BUCKs for use 133 as a SoC power controller. It also provides 32KHz clock outputs. This 134 driver provides basic register access and sets up the attached 135 regulators if regulator support is enabled. 136 137config PMIC_RN5T567 138 bool "Enable driver for Ricoh RN5T567 PMIC" 139 depends on DM_PMIC 140 ---help--- 141 The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO 142 regulators Real-Time Clock and 4 GPIOs. This driver provides 143 register access only. 144 145config PMIC_TPS65090 146 bool "Enable driver for Texas Instruments TPS65090 PMIC" 147 depends on DM_PMIC 148 ---help--- 149 The TPS65090 is a PMIC containing several LDOs, DC to DC convertors, 150 FETs and a battery charger. This driver provides register access 151 only, and you can enable the regulator/charger drivers separately if 152 required. 153 154config PMIC_PALMAS 155 bool "Enable driver for Texas Instruments PALMAS PMIC" 156 depends on DM_PMIC 157 ---help--- 158 The PALMAS is a PMIC containing several LDOs, SMPS. 159 This driver binds the pmic children. 160 161config PMIC_LP873X 162 bool "Enable driver for Texas Instruments LP873X PMIC" 163 depends on DM_PMIC 164 ---help--- 165 The LP873X is a PMIC containing couple of LDOs and couple of SMPS. 166 This driver binds the pmic children. 167 168config POWER_MC34VR500 169 bool "Enable driver for Freescale MC34VR500 PMIC" 170 ---help--- 171 The MC34VR500 is used in conjunction with the FSL T1 and LS1 series 172 SoC. It provides 4 buck DC-DC convertors and 5 LDOs, and it is accessed 173 via an I2C interface. 174