1 #include <common.h>
2 #include <dm.h>
3 #include <dm/pinctrl.h>
4 #include <asm/arch/gpio.h>
5 #include <asm/gpio.h>
6 #include <asm/io.h>
7 
8 DECLARE_GLOBAL_DATA_PTR;
9 
10 #define MAX_PINS_ONE_IP			70
11 #define MODE_BITS_MASK			3
12 #define OSPEED_MASK			3
13 #define PUPD_MASK			3
14 #define OTYPE_MSK			1
15 #define AFR_MASK			0xF
16 
17 static int stm32_gpio_config(struct gpio_desc *desc,
18 			     const struct stm32_gpio_ctl *ctl)
19 {
20 	struct stm32_gpio_priv *priv = dev_get_priv(desc->dev);
21 	struct stm32_gpio_regs *regs = priv->regs;
22 	u32 index;
23 
24 	if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 ||
25 	    ctl->pupd > 2 || ctl->speed > 3)
26 		return -EINVAL;
27 
28 	index = (desc->offset & 0x07) * 4;
29 	clrsetbits_le32(&regs->afr[desc->offset >> 3], AFR_MASK << index,
30 			ctl->af << index);
31 
32 	index = desc->offset * 2;
33 	clrsetbits_le32(&regs->moder, MODE_BITS_MASK << index,
34 			ctl->mode << index);
35 	clrsetbits_le32(&regs->ospeedr, OSPEED_MASK << index,
36 			ctl->speed << index);
37 	clrsetbits_le32(&regs->pupdr, PUPD_MASK << index, ctl->pupd << index);
38 
39 	index = desc->offset;
40 	clrsetbits_le32(&regs->otyper, OTYPE_MSK << index, ctl->otype << index);
41 
42 	return 0;
43 }
44 static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin)
45 {
46 	gpio_dsc->port = (port_pin & 0xF000) >> 12;
47 	gpio_dsc->pin = (port_pin & 0x0F00) >> 8;
48 	debug("%s: GPIO:port= %d, pin= %d\n", __func__, gpio_dsc->port,
49 	      gpio_dsc->pin);
50 
51 	return 0;
52 }
53 
54 static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
55 {
56 	gpio_fn &= 0x00FF;
57 	gpio_ctl->af = 0;
58 
59 	switch (gpio_fn) {
60 	case 0:
61 		gpio_ctl->mode = STM32_GPIO_MODE_IN;
62 		break;
63 	case 1 ... 16:
64 		gpio_ctl->mode = STM32_GPIO_MODE_AF;
65 		gpio_ctl->af = gpio_fn - 1;
66 		break;
67 	case 17:
68 		gpio_ctl->mode = STM32_GPIO_MODE_AN;
69 		break;
70 	default:
71 		gpio_ctl->mode = STM32_GPIO_MODE_OUT;
72 		break;
73 	}
74 
75 	gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0);
76 
77 	if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain"))
78 		gpio_ctl->otype = STM32_GPIO_OTYPE_OD;
79 	else
80 		gpio_ctl->otype = STM32_GPIO_OTYPE_PP;
81 
82 	if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up"))
83 		gpio_ctl->pupd = STM32_GPIO_PUPD_UP;
84 	else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down"))
85 		gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN;
86 	else
87 		gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
88 
89 	debug("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n",
90 	      __func__,  gpio_fn, gpio_ctl->speed, gpio_ctl->otype,
91 	     gpio_ctl->pupd);
92 
93 	return 0;
94 }
95 
96 static int stm32_pinctrl_set_state_simple(struct udevice *dev,
97 					  struct udevice *periph)
98 {
99 	u32 pin_mux[MAX_PINS_ONE_IP];
100 	struct fdtdec_phandle_args args;
101 	int rv, len;
102 
103 	/* Get node pinctrl-0 */
104 	rv = fdtdec_parse_phandle_with_args(gd->fdt_blob, periph->of_offset,
105 					   "pinctrl-0", 0, 0, 0, &args);
106 	if (rv)
107 		return rv;
108 	/*
109 	 * check for "pinmux" property in each subnode (e.g. pins1 and pins2 for
110 	 * usart1) of pin controller phandle "pinctrl-0"
111 	 * */
112 	fdt_for_each_subnode(args.node, gd->fdt_blob, args.node) {
113 		struct stm32_gpio_dsc gpio_dsc;
114 		struct stm32_gpio_ctl gpio_ctl;
115 		int i;
116 
117 		len = fdtdec_get_int_array_count(gd->fdt_blob, args.node,
118 						 "pinmux", pin_mux,
119 						 ARRAY_SIZE(pin_mux));
120 		debug("%s: periph->name = %s, no of pinmux entries= %d\n",
121 		      __func__, periph->name, len);
122 		if (len < 0)
123 			return -EINVAL;
124 		for (i = 0; i < len; i++) {
125 			struct gpio_desc desc;
126 			debug("%s: pinmux = %x\n", __func__, *(pin_mux + i));
127 			prep_gpio_dsc(&gpio_dsc, *(pin_mux + i));
128 			prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), args.node);
129 			rv = uclass_get_device_by_seq(UCLASS_GPIO,
130 						      gpio_dsc.port, &desc.dev);
131 			if (rv)
132 				return rv;
133 			desc.offset = gpio_dsc.pin;
134 			rv = stm32_gpio_config(&desc, &gpio_ctl);
135 			debug("%s: rv = %d\n\n", __func__, rv);
136 			if (rv)
137 				return rv;
138 		}
139 	}
140 
141 	return 0;
142 }
143 
144 static struct pinctrl_ops stm32_pinctrl_ops = {
145 	.set_state_simple	= stm32_pinctrl_set_state_simple,
146 };
147 
148 static const struct udevice_id stm32_pinctrl_ids[] = {
149 	{ .compatible = "st,stm32f746-pinctrl" },
150 	{ }
151 };
152 
153 U_BOOT_DRIVER(pinctrl_stm32) = {
154 	.name		= "pinctrl_stm32",
155 	.id		= UCLASS_PINCTRL,
156 	.of_match	= stm32_pinctrl_ids,
157 	.ops		= &stm32_pinctrl_ops,
158 	.bind		= dm_scan_fdt_dev,
159 };
160