1 #include <common.h> 2 #include <dm.h> 3 #include <dm/pinctrl.h> 4 #include <asm/arch/gpio.h> 5 #include <asm/gpio.h> 6 #include <asm/io.h> 7 8 DECLARE_GLOBAL_DATA_PTR; 9 10 #define MAX_PINS_ONE_IP 70 11 #define MODE_BITS_MASK 3 12 #define OSPEED_MASK 3 13 #define PUPD_MASK 3 14 #define OTYPE_MSK 1 15 #define AFR_MASK 0xF 16 17 static int stm32_gpio_config(struct gpio_desc *desc, 18 const struct stm32_gpio_ctl *ctl) 19 { 20 struct stm32_gpio_priv *priv = dev_get_priv(desc->dev); 21 struct stm32_gpio_regs *regs = priv->regs; 22 u32 index; 23 24 if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 || 25 ctl->pupd > 2 || ctl->speed > 3) 26 return -EINVAL; 27 28 index = (desc->offset & 0x07) * 4; 29 clrsetbits_le32(®s->afr[desc->offset >> 3], AFR_MASK << index, 30 ctl->af << index); 31 32 index = desc->offset * 2; 33 clrsetbits_le32(®s->moder, MODE_BITS_MASK << index, 34 ctl->mode << index); 35 clrsetbits_le32(®s->ospeedr, OSPEED_MASK << index, 36 ctl->speed << index); 37 clrsetbits_le32(®s->pupdr, PUPD_MASK << index, ctl->pupd << index); 38 39 index = desc->offset; 40 clrsetbits_le32(®s->otyper, OTYPE_MSK << index, ctl->otype << index); 41 42 return 0; 43 } 44 static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) 45 { 46 gpio_dsc->port = (port_pin & 0xF000) >> 12; 47 gpio_dsc->pin = (port_pin & 0x0F00) >> 8; 48 debug("%s: GPIO:port= %d, pin= %d\n", __func__, gpio_dsc->port, 49 gpio_dsc->pin); 50 51 return 0; 52 } 53 54 static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node) 55 { 56 gpio_fn &= 0x00FF; 57 gpio_ctl->af = 0; 58 59 switch (gpio_fn) { 60 case 0: 61 gpio_ctl->mode = STM32_GPIO_MODE_IN; 62 break; 63 case 1 ... 16: 64 gpio_ctl->mode = STM32_GPIO_MODE_AF; 65 gpio_ctl->af = gpio_fn - 1; 66 break; 67 case 17: 68 gpio_ctl->mode = STM32_GPIO_MODE_AN; 69 break; 70 default: 71 gpio_ctl->mode = STM32_GPIO_MODE_OUT; 72 break; 73 } 74 75 gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0); 76 77 if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain")) 78 gpio_ctl->otype = STM32_GPIO_OTYPE_OD; 79 else 80 gpio_ctl->otype = STM32_GPIO_OTYPE_PP; 81 82 if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up")) 83 gpio_ctl->pupd = STM32_GPIO_PUPD_UP; 84 else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down")) 85 gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN; 86 else 87 gpio_ctl->pupd = STM32_GPIO_PUPD_NO; 88 89 debug("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n", 90 __func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype, 91 gpio_ctl->pupd); 92 93 return 0; 94 } 95 96 static int stm32_pinctrl_config(int offset) 97 { 98 u32 pin_mux[MAX_PINS_ONE_IP]; 99 int rv, len; 100 101 /* 102 * check for "pinmux" property in each subnode (e.g. pins1 and pins2 for 103 * usart1) of pin controller phandle "pinctrl-0" 104 * */ 105 fdt_for_each_subnode(offset, gd->fdt_blob, offset) { 106 struct stm32_gpio_dsc gpio_dsc; 107 struct stm32_gpio_ctl gpio_ctl; 108 int i; 109 110 len = fdtdec_get_int_array_count(gd->fdt_blob, offset, 111 "pinmux", pin_mux, 112 ARRAY_SIZE(pin_mux)); 113 debug("%s: no of pinmux entries= %d\n", __func__, len); 114 if (len < 0) 115 return -EINVAL; 116 for (i = 0; i < len; i++) { 117 struct gpio_desc desc; 118 debug("%s: pinmux = %x\n", __func__, *(pin_mux + i)); 119 prep_gpio_dsc(&gpio_dsc, *(pin_mux + i)); 120 prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), offset); 121 rv = uclass_get_device_by_seq(UCLASS_GPIO, 122 gpio_dsc.port, &desc.dev); 123 if (rv) 124 return rv; 125 desc.offset = gpio_dsc.pin; 126 rv = stm32_gpio_config(&desc, &gpio_ctl); 127 debug("%s: rv = %d\n\n", __func__, rv); 128 if (rv) 129 return rv; 130 } 131 } 132 133 return 0; 134 } 135 136 #if CONFIG_IS_ENABLED(PINCTRL_FULL) 137 static int stm32_pinctrl_set_state(struct udevice *dev, struct udevice *config) 138 { 139 return stm32_pinctrl_config(dev_of_offset(config)); 140 } 141 #else /* PINCTRL_FULL */ 142 static int stm32_pinctrl_set_state_simple(struct udevice *dev, 143 struct udevice *periph) 144 { 145 const void *fdt = gd->fdt_blob; 146 const fdt32_t *list; 147 uint32_t phandle; 148 int config_node; 149 int size, i, ret; 150 151 list = fdt_getprop(fdt, dev_of_offset(periph), "pinctrl-0", &size); 152 if (!list) 153 return -EINVAL; 154 155 debug("%s: periph->name = %s\n", __func__, periph->name); 156 157 size /= sizeof(*list); 158 for (i = 0; i < size; i++) { 159 phandle = fdt32_to_cpu(*list++); 160 161 config_node = fdt_node_offset_by_phandle(fdt, phandle); 162 if (config_node < 0) { 163 error("prop pinctrl-0 index %d invalid phandle\n", i); 164 return -EINVAL; 165 } 166 167 ret = stm32_pinctrl_config(config_node); 168 if (ret) 169 return ret; 170 } 171 172 return 0; 173 } 174 #endif /* PINCTRL_FULL */ 175 176 static struct pinctrl_ops stm32_pinctrl_ops = { 177 #if CONFIG_IS_ENABLED(PINCTRL_FULL) 178 .set_state = stm32_pinctrl_set_state, 179 #else /* PINCTRL_FULL */ 180 .set_state_simple = stm32_pinctrl_set_state_simple, 181 #endif /* PINCTRL_FULL */ 182 }; 183 184 static const struct udevice_id stm32_pinctrl_ids[] = { 185 { .compatible = "st,stm32f746-pinctrl" }, 186 { } 187 }; 188 189 U_BOOT_DRIVER(pinctrl_stm32) = { 190 .name = "pinctrl_stm32", 191 .id = UCLASS_PINCTRL, 192 .of_match = stm32_pinctrl_ids, 193 .ops = &stm32_pinctrl_ops, 194 .bind = dm_scan_fdt_dev, 195 }; 196