1 /* 2 * Pinctrl driver for STMicroelectronics STi SoCs 3 * 4 * Copyright (c) 2017 5 * Patrice Chotard <patrice.chotard@st.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0 8 */ 9 10 #include <common.h> 11 #include <bitfield.h> 12 #include <dm.h> 13 #include <errno.h> 14 #include <regmap.h> 15 #include <syscon.h> 16 #include <asm/io.h> 17 #include <dm/pinctrl.h> 18 19 DECLARE_GLOBAL_DATA_PTR; 20 21 #define MAX_STI_PINCONF_ENTRIES 7 22 /* Output enable */ 23 #define OE (1 << 27) 24 /* Pull Up */ 25 #define PU (1 << 26) 26 /* Open Drain */ 27 #define OD (1 << 25) 28 29 /* User-frendly defines for Pin Direction */ 30 /* oe = 0, pu = 0, od = 0 */ 31 #define IN (0) 32 /* oe = 0, pu = 1, od = 0 */ 33 #define IN_PU (PU) 34 /* oe = 1, pu = 0, od = 0 */ 35 #define OUT (OE) 36 /* oe = 1, pu = 1, od = 0 */ 37 #define OUT_PU (OE | PU) 38 /* oe = 1, pu = 0, od = 1 */ 39 #define BIDIR (OE | OD) 40 /* oe = 1, pu = 1, od = 1 */ 41 #define BIDIR_PU (OE | PU | OD) 42 43 struct sti_pinctrl_platdata { 44 struct regmap *regmap; 45 }; 46 47 struct sti_pin_desc { 48 unsigned char bank; 49 unsigned char pin; 50 unsigned char alt; 51 int dir; 52 }; 53 54 /* 55 * PIO alternative Function selector 56 */ 57 void sti_alternate_select(struct udevice *dev, struct sti_pin_desc *pin_desc) 58 { 59 struct sti_pinctrl_platdata *plat = dev_get_platdata(dev); 60 unsigned long sysconf, *sysconfreg; 61 int alt = pin_desc->alt; 62 int bank = pin_desc->bank; 63 int pin = pin_desc->pin; 64 65 sysconfreg = (unsigned long *)plat->regmap->base; 66 67 switch (bank) { 68 case 0 ... 5: /* in "SBC Bank" */ 69 sysconfreg += bank; 70 break; 71 case 10 ... 20: /* in "FRONT Bank" */ 72 sysconfreg += bank - 10; 73 break; 74 case 30 ... 35: /* in "REAR Bank" */ 75 sysconfreg += bank - 30; 76 break; 77 case 40 ... 42: /* in "FLASH Bank" */ 78 sysconfreg += bank - 40; 79 break; 80 default: 81 BUG(); 82 return; 83 } 84 85 sysconf = readl(sysconfreg); 86 sysconf = bitfield_replace(sysconf, pin * 4, 3, alt); 87 writel(sysconf, sysconfreg); 88 } 89 90 /* pin configuration */ 91 void sti_pin_configure(struct udevice *dev, struct sti_pin_desc *pin_desc) 92 { 93 struct sti_pinctrl_platdata *plat = dev_get_platdata(dev); 94 int bit; 95 int oe = 0, pu = 0, od = 0; 96 unsigned long *sysconfreg; 97 int bank = pin_desc->bank; 98 99 sysconfreg = (unsigned long *)plat->regmap->base + 40; 100 101 /* 102 * NOTE: The PIO configuration for the PIO pins in the 103 * "FLASH Bank" are different from all the other banks! 104 * Specifically, the output-enable pin control register 105 * (SYS_CFG_3040) and the pull-up pin control register 106 * (SYS_CFG_3050), are both classed as being "reserved". 107 * Hence, we do not write to these registers to configure 108 * the OE and PU features for PIOs in this bank. However, 109 * the open-drain pin control register (SYS_CFG_3060) 110 * follows the style of the other banks, and so we can 111 * treat that register normally. 112 * 113 * Being pedantic, we should configure the PU and PD features 114 * in the "FLASH Bank" explicitly instead using the four 115 * SYS_CFG registers: 3080, 3081, 3085, and 3086. However, this 116 * would necessitate passing in the alternate function number 117 * to this function, and adding some horrible complexity here. 118 * Alternatively, we could just perform 4 32-bit "pokes" to 119 * these four SYS_CFG registers early in the initialization. 120 * In practice, these four SYS_CFG registers are correct 121 * after a reset, and U-Boot does not need to change them, so 122 * we (cheat and) rely on these registers being correct. 123 * WARNING: Please be aware of this (pragmatic) behaviour! 124 */ 125 int flashss = 0; /* bool: PIO in the Flash Sub-System ? */ 126 127 switch (pin_desc->dir) { 128 case IN: 129 oe = 0; pu = 0; od = 0; 130 break; 131 case IN_PU: 132 oe = 0; pu = 1; od = 0; 133 break; 134 case OUT: 135 oe = 1; pu = 0; od = 0; 136 break; 137 case BIDIR: 138 oe = 1; pu = 0; od = 1; 139 break; 140 case BIDIR_PU: 141 oe = 1; pu = 1; od = 1; 142 break; 143 144 default: 145 pr_err("%s invalid direction value: 0x%x\n", 146 __func__, pin_desc->dir); 147 BUG(); 148 break; 149 } 150 151 switch (bank) { 152 case 0 ... 5: /* in "SBC Bank" */ 153 sysconfreg += bank / 4; 154 break; 155 case 10 ... 20: /* in "FRONT Bank" */ 156 bank -= 10; 157 sysconfreg += bank / 4; 158 break; 159 case 30 ... 35: /* in "REAR Bank" */ 160 bank -= 30; 161 sysconfreg += bank / 4; 162 break; 163 case 40 ... 42: /* in "FLASH Bank" */ 164 bank -= 40; 165 sysconfreg += bank / 4; 166 flashss = 1; /* pin is in the Flash Sub-System */ 167 break; 168 default: 169 BUG(); 170 return; 171 } 172 173 bit = ((bank * 8) + pin_desc->pin) % 32; 174 175 /* 176 * set the "Output Enable" pin control 177 * but, do nothing if in the flashSS 178 */ 179 if (!flashss) { 180 if (oe) 181 generic_set_bit(bit, sysconfreg); 182 else 183 generic_clear_bit(bit, sysconfreg); 184 } 185 186 sysconfreg += 10; /* skip to next set of syscfg registers */ 187 188 /* 189 * set the "Pull Up" pin control 190 * but, do nothing if in the FlashSS 191 */ 192 193 if (!flashss) { 194 if (pu) 195 generic_set_bit(bit, sysconfreg); 196 else 197 generic_clear_bit(bit, sysconfreg); 198 } 199 200 sysconfreg += 10; /* skip to next set of syscfg registers */ 201 202 /* set the "Open Drain Enable" pin control */ 203 if (od) 204 generic_set_bit(bit, sysconfreg); 205 else 206 generic_clear_bit(bit, sysconfreg); 207 } 208 209 210 static int sti_pinctrl_set_state(struct udevice *dev, struct udevice *config) 211 { 212 struct fdtdec_phandle_args args; 213 const void *blob = gd->fdt_blob; 214 const char *prop_name; 215 int node = dev_of_offset(config); 216 int property_offset, prop_len; 217 int pinconf_node, ret, count; 218 const char *bank_name; 219 u32 cells[MAX_STI_PINCONF_ENTRIES]; 220 221 struct sti_pin_desc pin_desc; 222 223 /* go to next node "st,pins" which contains the pins configuration */ 224 pinconf_node = fdt_subnode_offset(blob, node, "st,pins"); 225 226 /* 227 * parse each pins configuration which looks like : 228 * pin_name = <bank_phandle pin_nb alt dir rt_type rt_delay rt_clk> 229 */ 230 231 fdt_for_each_property_offset(property_offset, blob, pinconf_node) { 232 fdt_getprop_by_offset(blob, property_offset, &prop_name, 233 &prop_len); 234 235 /* extract the bank of the pin description */ 236 ret = fdtdec_parse_phandle_with_args(blob, pinconf_node, 237 prop_name, "#gpio-cells", 238 0, 0, &args); 239 if (ret < 0) { 240 pr_err("Can't get the gpio bank phandle: %d\n", ret); 241 return ret; 242 } 243 244 bank_name = fdt_getprop(blob, args.node, "st,bank-name", 245 &count); 246 if (count < 0) { 247 pr_err("Can't find bank-name property %d\n", count); 248 return -EINVAL; 249 } 250 251 pin_desc.bank = trailing_strtoln(bank_name, NULL); 252 253 count = fdtdec_get_int_array_count(blob, pinconf_node, 254 prop_name, cells, 255 ARRAY_SIZE(cells)); 256 if (count < 0) { 257 pr_err("Bad pin configuration array %d\n", count); 258 return -EINVAL; 259 } 260 261 if (count > MAX_STI_PINCONF_ENTRIES) { 262 pr_err("Unsupported pinconf array count %d\n", count); 263 return -EINVAL; 264 } 265 266 pin_desc.pin = cells[1]; 267 pin_desc.alt = cells[2]; 268 pin_desc.dir = cells[3]; 269 270 sti_alternate_select(dev, &pin_desc); 271 sti_pin_configure(dev, &pin_desc); 272 }; 273 274 return 0; 275 } 276 277 static int sti_pinctrl_probe(struct udevice *dev) 278 { 279 struct sti_pinctrl_platdata *plat = dev_get_platdata(dev); 280 struct udevice *syscon; 281 int err; 282 283 /* get corresponding syscon phandle */ 284 err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, 285 "st,syscfg", &syscon); 286 if (err) { 287 pr_err("unable to find syscon device\n"); 288 return err; 289 } 290 291 plat->regmap = syscon_get_regmap(syscon); 292 if (!plat->regmap) { 293 pr_err("unable to find regmap\n"); 294 return -ENODEV; 295 } 296 297 return 0; 298 } 299 300 static const struct udevice_id sti_pinctrl_ids[] = { 301 { .compatible = "st,stih407-sbc-pinctrl" }, 302 { .compatible = "st,stih407-front-pinctrl" }, 303 { .compatible = "st,stih407-rear-pinctrl" }, 304 { .compatible = "st,stih407-flash-pinctrl" }, 305 { } 306 }; 307 308 const struct pinctrl_ops sti_pinctrl_ops = { 309 .set_state = sti_pinctrl_set_state, 310 }; 311 312 U_BOOT_DRIVER(pinctrl_sti) = { 313 .name = "pinctrl_sti", 314 .id = UCLASS_PINCTRL, 315 .of_match = sti_pinctrl_ids, 316 .ops = &sti_pinctrl_ops, 317 .probe = sti_pinctrl_probe, 318 .platdata_auto_alloc_size = sizeof(struct sti_pinctrl_platdata), 319 .ops = &sti_pinctrl_ops, 320 }; 321