xref: /openbmc/u-boot/drivers/phy/meson-gxl-usb2.c (revision e11ef3d2) 
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Meson GXL and GXM USB2 PHY driver
4  *
5  * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
6  * Copyright (C) 2018 BayLibre, SAS
7  * Author: Neil Armstrong <narmstron@baylibre.com>
8  */
9 
10 #include <common.h>
11 #include <asm/io.h>
12 #include <bitfield.h>
13 #include <dm.h>
14 #include <errno.h>
15 #include <generic-phy.h>
16 #include <regmap.h>
17 #include <power/regulator.h>
18 #include <clk.h>
19 
20 #include <linux/bitops.h>
21 #include <linux/compat.h>
22 
23 /* bits [31:27] are read-only */
24 #define U2P_R0							0x0
25 	#define U2P_R0_BYPASS_SEL				BIT(0)
26 	#define U2P_R0_BYPASS_DM_EN				BIT(1)
27 	#define U2P_R0_BYPASS_DP_EN				BIT(2)
28 	#define U2P_R0_TXBITSTUFF_ENH				BIT(3)
29 	#define U2P_R0_TXBITSTUFF_EN				BIT(4)
30 	#define U2P_R0_DM_PULLDOWN				BIT(5)
31 	#define U2P_R0_DP_PULLDOWN				BIT(6)
32 	#define U2P_R0_DP_VBUS_VLD_EXT_SEL			BIT(7)
33 	#define U2P_R0_DP_VBUS_VLD_EXT				BIT(8)
34 	#define U2P_R0_ADP_PRB_EN				BIT(9)
35 	#define U2P_R0_ADP_DISCHARGE				BIT(10)
36 	#define U2P_R0_ADP_CHARGE				BIT(11)
37 	#define U2P_R0_DRV_VBUS					BIT(12)
38 	#define U2P_R0_ID_PULLUP				BIT(13)
39 	#define U2P_R0_LOOPBACK_EN_B				BIT(14)
40 	#define U2P_R0_OTG_DISABLE				BIT(15)
41 	#define U2P_R0_COMMON_ONN				BIT(16)
42 	#define U2P_R0_FSEL_MASK				GENMASK(19, 17)
43 	#define U2P_R0_REF_CLK_SEL_MASK				GENMASK(21, 20)
44 	#define U2P_R0_POWER_ON_RESET				BIT(22)
45 	#define U2P_R0_V_ATE_TEST_EN_B_MASK			GENMASK(24, 23)
46 	#define U2P_R0_ID_SET_ID_DQ				BIT(25)
47 	#define U2P_R0_ATE_RESET				BIT(26)
48 	#define U2P_R0_FSV_MINUS				BIT(27)
49 	#define U2P_R0_FSV_PLUS					BIT(28)
50 	#define U2P_R0_BYPASS_DM_DATA				BIT(29)
51 	#define U2P_R0_BYPASS_DP_DATA				BIT(30)
52 
53 #define U2P_R1							0x4
54 	#define U2P_R1_BURN_IN_TEST				BIT(0)
55 	#define U2P_R1_ACA_ENABLE				BIT(1)
56 	#define U2P_R1_DCD_ENABLE				BIT(2)
57 	#define U2P_R1_VDAT_SRC_EN_B				BIT(3)
58 	#define U2P_R1_VDAT_DET_EN_B				BIT(4)
59 	#define U2P_R1_CHARGES_SEL				BIT(5)
60 	#define U2P_R1_TX_PREEMP_PULSE_TUNE			BIT(6)
61 	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK			GENMASK(8, 7)
62 	#define U2P_R1_TX_RES_TUNE_MASK				GENMASK(10, 9)
63 	#define U2P_R1_TX_RISE_TUNE_MASK			GENMASK(12, 11)
64 	#define U2P_R1_TX_VREF_TUNE_MASK			GENMASK(16, 13)
65 	#define U2P_R1_TX_FSLS_TUNE_MASK			GENMASK(20, 17)
66 	#define U2P_R1_TX_HSXV_TUNE_MASK			GENMASK(22, 21)
67 	#define U2P_R1_OTG_TUNE_MASK				GENMASK(25, 23)
68 	#define U2P_R1_SQRX_TUNE_MASK				GENMASK(28, 26)
69 	#define U2P_R1_COMP_DIS_TUNE_MASK			GENMASK(31, 29)
70 
71 /* bits [31:14] are read-only */
72 #define U2P_R2							0x8
73 	#define U2P_R2_TESTDATA_IN_MASK				GENMASK(7, 0)
74 	#define U2P_R2_TESTADDR_MASK				GENMASK(11, 8)
75 	#define U2P_R2_TESTDATA_OUT_SEL				BIT(12)
76 	#define U2P_R2_TESTCLK					BIT(13)
77 	#define U2P_R2_TESTDATA_OUT_MASK			GENMASK(17, 14)
78 	#define U2P_R2_ACA_PIN_RANGE_C				BIT(18)
79 	#define U2P_R2_ACA_PIN_RANGE_B				BIT(19)
80 	#define U2P_R2_ACA_PIN_RANGE_A				BIT(20)
81 	#define U2P_R2_ACA_PIN_GND				BIT(21)
82 	#define U2P_R2_ACA_PIN_FLOAT				BIT(22)
83 	#define U2P_R2_CHARGE_DETECT				BIT(23)
84 	#define U2P_R2_DEVICE_SESSION_VALID			BIT(24)
85 	#define U2P_R2_ADP_PROBE				BIT(25)
86 	#define U2P_R2_ADP_SENSE				BIT(26)
87 	#define U2P_R2_SESSION_END				BIT(27)
88 	#define U2P_R2_VBUS_VALID				BIT(28)
89 	#define U2P_R2_B_VALID					BIT(29)
90 	#define U2P_R2_A_VALID					BIT(30)
91 	#define U2P_R2_ID_DIG					BIT(31)
92 
93 #define U2P_R3							0xc
94 
95 #define RESET_COMPLETE_TIME				500
96 
97 struct phy_meson_gxl_usb2_priv {
98 	struct regmap		*regmap;
99 #if CONFIG_IS_ENABLED(DM_REGULATOR)
100 	struct udevice		*phy_supply;
101 #endif
102 #if CONFIG_IS_ENABLED(CLK)
103 	struct clk		clk;
104 #endif
105 };
106 
107 static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
108 {
109 	uint val;
110 
111 	regmap_read(priv->regmap, U2P_R0, &val);
112 
113 	/* reset the PHY and wait until settings are stabilized */
114 	val |= U2P_R0_POWER_ON_RESET;
115 	regmap_write(priv->regmap, U2P_R0, val);
116 	udelay(RESET_COMPLETE_TIME);
117 
118 	val &= ~U2P_R0_POWER_ON_RESET;
119 	regmap_write(priv->regmap, U2P_R0, val);
120 	udelay(RESET_COMPLETE_TIME);
121 }
122 
123 static void
124 phy_meson_gxl_usb2_set_host_mode(struct phy_meson_gxl_usb2_priv *priv)
125 {
126 	uint val;
127 
128 	regmap_read(priv->regmap, U2P_R0, &val);
129 	val |= U2P_R0_DM_PULLDOWN;
130 	val |= U2P_R0_DP_PULLDOWN;
131 	val &= ~U2P_R0_ID_PULLUP;
132 	regmap_write(priv->regmap, U2P_R0, val);
133 
134 	phy_meson_gxl_usb2_reset(priv);
135 }
136 
137 static int phy_meson_gxl_usb2_power_on(struct phy *phy)
138 {
139 	struct udevice *dev = phy->dev;
140 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
141 	uint val;
142 
143 	regmap_read(priv->regmap, U2P_R0, &val);
144 	/* power on the PHY by taking it out of reset mode */
145 	val &= ~U2P_R0_POWER_ON_RESET;
146 	regmap_write(priv->regmap, U2P_R0, val);
147 
148 	phy_meson_gxl_usb2_set_host_mode(priv);
149 
150 #if CONFIG_IS_ENABLED(DM_REGULATOR)
151 	if (priv->phy_supply) {
152 		int ret = regulator_set_enable(priv->phy_supply, true);
153 		if (ret)
154 			return ret;
155 	}
156 #endif
157 
158 	return 0;
159 }
160 
161 static int phy_meson_gxl_usb2_power_off(struct phy *phy)
162 {
163 	struct udevice *dev = phy->dev;
164 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
165 	uint val;
166 
167 	regmap_read(priv->regmap, U2P_R0, &val);
168 	/* power off the PHY by putting it into reset mode */
169 	val |= U2P_R0_POWER_ON_RESET;
170 	regmap_write(priv->regmap, U2P_R0, val);
171 
172 #if CONFIG_IS_ENABLED(DM_REGULATOR)
173 	if (priv->phy_supply) {
174 		int ret = regulator_set_enable(priv->phy_supply, false);
175 		if (ret) {
176 			pr_err("Error disabling PHY supply\n");
177 			return ret;
178 		}
179 	}
180 #endif
181 
182 	return 0;
183 }
184 
185 struct phy_ops meson_gxl_usb2_phy_ops = {
186 	.power_on = phy_meson_gxl_usb2_power_on,
187 	.power_off = phy_meson_gxl_usb2_power_off,
188 };
189 
190 int meson_gxl_usb2_phy_probe(struct udevice *dev)
191 {
192 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
193 	int ret;
194 
195 	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
196 	if (ret)
197 		return ret;
198 
199 #if CONFIG_IS_ENABLED(CLK)
200 	ret = clk_get_by_index(dev, 0, &priv->clk);
201 	if (ret < 0)
202 		return ret;
203 
204 	ret = clk_enable(&priv->clk);
205 	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
206 		pr_err("failed to enable PHY clock\n");
207 		clk_free(&priv->clk);
208 		return ret;
209 	}
210 #endif
211 
212 #if CONFIG_IS_ENABLED(DM_REGULATOR)
213 	ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
214 	if (ret && ret != -ENOENT) {
215 		pr_err("Failed to get PHY regulator\n");
216 		return ret;
217 	}
218 #endif
219 
220 	return 0;
221 }
222 
223 static const struct udevice_id meson_gxl_usb2_phy_ids[] = {
224 	{ .compatible = "amlogic,meson-gxl-usb2-phy" },
225 	{ }
226 };
227 
228 U_BOOT_DRIVER(meson_gxl_usb2_phy) = {
229 	.name = "meson_gxl_usb2_phy",
230 	.id = UCLASS_PHY,
231 	.of_match = meson_gxl_usb2_phy_ids,
232 	.probe = meson_gxl_usb2_phy_probe,
233 	.ops = &meson_gxl_usb2_phy_ops,
234 	.priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb2_priv),
235 };
236