xref: /openbmc/u-boot/drivers/pci/pcie_xilinx.c (revision a4670f8e)
1 /*
2  * Xilinx AXI Bridge for PCI Express Driver
3  *
4  * Copyright (C) 2016 Imagination Technologies
5  *
6  * SPDX-License-Identifier:	GPL-2.0
7  */
8 
9 #include <common.h>
10 #include <dm.h>
11 #include <pci.h>
12 
13 #include <asm/io.h>
14 
15 /**
16  * struct xilinx_pcie - Xilinx PCIe controller state
17  * @cfg_base: The base address of memory mapped configuration space
18  */
19 struct xilinx_pcie {
20 	void *cfg_base;
21 };
22 
23 /* Register definitions */
24 #define XILINX_PCIE_REG_PSCR		0x144
25 #define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
26 
27 /**
28  * pcie_xilinx_link_up() - Check whether the PCIe link is up
29  * @pcie: Pointer to the PCI controller state
30  *
31  * Checks whether the PCIe link for the given device is up or down.
32  *
33  * Return: true if the link is up, else false
34  */
35 static bool pcie_xilinx_link_up(struct xilinx_pcie *pcie)
36 {
37 	uint32_t pscr = __raw_readl(pcie->cfg_base + XILINX_PCIE_REG_PSCR);
38 
39 	return pscr & XILINX_PCIE_REG_PSCR_LNKUP;
40 }
41 
42 /**
43  * pcie_xilinx_config_address() - Calculate the address of a config access
44  * @pcie: Pointer to the PCI controller state
45  * @bdf: Identifies the PCIe device to access
46  * @offset: The offset into the device's configuration space
47  * @paddress: Pointer to the pointer to write the calculates address to
48  *
49  * Calculates the address that should be accessed to perform a PCIe
50  * configuration space access for a given device identified by the PCIe
51  * controller device @pcie and the bus, device & function numbers in @bdf. If
52  * access to the device is not valid then the function will return an error
53  * code. Otherwise the address to access will be written to the pointer pointed
54  * to by @paddress.
55  *
56  * Return: 0 on success, else -ENODEV
57  */
58 static int pcie_xilinx_config_address(struct xilinx_pcie *pcie, pci_dev_t bdf,
59 				      uint offset, void **paddress)
60 {
61 	unsigned int bus = PCI_BUS(bdf);
62 	unsigned int dev = PCI_DEV(bdf);
63 	unsigned int func = PCI_FUNC(bdf);
64 	void *addr;
65 
66 	if ((bus > 0) && !pcie_xilinx_link_up(pcie))
67 		return -ENODEV;
68 
69 	/*
70 	 * Busses 0 (host-PCIe bridge) & 1 (its immediate child) are
71 	 * limited to a single device each.
72 	 */
73 	if ((bus < 2) && (dev > 0))
74 		return -ENODEV;
75 
76 	addr = pcie->cfg_base;
77 	addr += bus << 20;
78 	addr += dev << 15;
79 	addr += func << 12;
80 	addr += offset;
81 	*paddress = addr;
82 
83 	return 0;
84 }
85 
86 /**
87  * pcie_xilinx_read_config() - Read from configuration space
88  * @bus: Pointer to the PCI bus
89  * @bdf: Identifies the PCIe device to access
90  * @offset: The offset into the device's configuration space
91  * @valuep: A pointer at which to store the read value
92  * @size: Indicates the size of access to perform
93  *
94  * Read a value of size @size from offset @offset within the configuration
95  * space of the device identified by the bus, device & function numbers in @bdf
96  * on the PCI bus @bus.
97  *
98  * Return: 0 on success, else -ENODEV or -EINVAL
99  */
100 static int pcie_xilinx_read_config(struct udevice *bus, pci_dev_t bdf,
101 				   uint offset, ulong *valuep,
102 				   enum pci_size_t size)
103 {
104 	struct xilinx_pcie *pcie = dev_get_priv(bus);
105 	void *address;
106 	int err;
107 
108 	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
109 	if (err < 0) {
110 		*valuep = pci_get_ff(size);
111 		return 0;
112 	}
113 
114 	switch (size) {
115 	case PCI_SIZE_8:
116 		*valuep = __raw_readb(address);
117 		return 0;
118 	case PCI_SIZE_16:
119 		*valuep = __raw_readw(address);
120 		return 0;
121 	case PCI_SIZE_32:
122 		*valuep = __raw_readl(address);
123 		return 0;
124 	default:
125 		return -EINVAL;
126 	}
127 }
128 
129 /**
130  * pcie_xilinx_write_config() - Write to configuration space
131  * @bus: Pointer to the PCI bus
132  * @bdf: Identifies the PCIe device to access
133  * @offset: The offset into the device's configuration space
134  * @value: The value to write
135  * @size: Indicates the size of access to perform
136  *
137  * Write the value @value of size @size from offset @offset within the
138  * configuration space of the device identified by the bus, device & function
139  * numbers in @bdf on the PCI bus @bus.
140  *
141  * Return: 0 on success, else -ENODEV or -EINVAL
142  */
143 static int pcie_xilinx_write_config(struct udevice *bus, pci_dev_t bdf,
144 				    uint offset, ulong value,
145 				    enum pci_size_t size)
146 {
147 	struct xilinx_pcie *pcie = dev_get_priv(bus);
148 	void *address;
149 	int err;
150 
151 	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
152 	if (err < 0)
153 		return 0;
154 
155 	switch (size) {
156 	case PCI_SIZE_8:
157 		__raw_writeb(value, address);
158 		return 0;
159 	case PCI_SIZE_16:
160 		__raw_writew(value, address);
161 		return 0;
162 	case PCI_SIZE_32:
163 		__raw_writel(value, address);
164 		return 0;
165 	default:
166 		return -EINVAL;
167 	}
168 }
169 
170 /**
171  * pcie_xilinx_ofdata_to_platdata() - Translate from DT to device state
172  * @dev: A pointer to the device being operated on
173  *
174  * Translate relevant data from the device tree pertaining to device @dev into
175  * state that the driver will later make use of. This state is stored in the
176  * device's private data structure.
177  *
178  * Return: 0 on success, else -EINVAL
179  */
180 static int pcie_xilinx_ofdata_to_platdata(struct udevice *dev)
181 {
182 	struct xilinx_pcie *pcie = dev_get_priv(dev);
183 	struct fdt_resource reg_res;
184 	DECLARE_GLOBAL_DATA_PTR;
185 	int err;
186 
187 	err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
188 			       0, &reg_res);
189 	if (err < 0) {
190 		error("\"reg\" resource not found\n");
191 		return err;
192 	}
193 
194 	pcie->cfg_base = map_physmem(reg_res.start,
195 				     fdt_resource_size(&reg_res),
196 				     MAP_NOCACHE);
197 
198 	return 0;
199 }
200 
201 static const struct dm_pci_ops pcie_xilinx_ops = {
202 	.read_config	= pcie_xilinx_read_config,
203 	.write_config	= pcie_xilinx_write_config,
204 };
205 
206 static const struct udevice_id pcie_xilinx_ids[] = {
207 	{ .compatible = "xlnx,axi-pcie-host-1.00.a" },
208 	{ }
209 };
210 
211 U_BOOT_DRIVER(pcie_xilinx) = {
212 	.name			= "pcie_xilinx",
213 	.id			= UCLASS_PCI,
214 	.of_match		= pcie_xilinx_ids,
215 	.ops			= &pcie_xilinx_ops,
216 	.ofdata_to_platdata	= pcie_xilinx_ofdata_to_platdata,
217 	.priv_auto_alloc_size	= sizeof(struct xilinx_pcie),
218 };
219