xref: /openbmc/u-boot/drivers/pci/pcie_xilinx.c (revision 747778cf)
1 /*
2  * Xilinx AXI Bridge for PCI Express Driver
3  *
4  * Copyright (C) 2016 Imagination Technologies
5  *
6  * SPDX-License-Identifier:	GPL-2.0
7  */
8 
9 #include <common.h>
10 #include <dm.h>
11 #include <pci.h>
12 
13 #include <asm/io.h>
14 
15 /**
16  * struct xilinx_pcie - Xilinx PCIe controller state
17  * @hose: The parent classes PCI controller state
18  * @cfg_base: The base address of memory mapped configuration space
19  */
20 struct xilinx_pcie {
21 	struct pci_controller hose;
22 	void *cfg_base;
23 };
24 
25 /* Register definitions */
26 #define XILINX_PCIE_REG_PSCR		0x144
27 #define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
28 
29 /**
30  * pcie_xilinx_link_up() - Check whether the PCIe link is up
31  * @pcie: Pointer to the PCI controller state
32  *
33  * Checks whether the PCIe link for the given device is up or down.
34  *
35  * Return: true if the link is up, else false
36  */
37 static bool pcie_xilinx_link_up(struct xilinx_pcie *pcie)
38 {
39 	uint32_t pscr = __raw_readl(pcie->cfg_base + XILINX_PCIE_REG_PSCR);
40 
41 	return pscr & XILINX_PCIE_REG_PSCR_LNKUP;
42 }
43 
44 /**
45  * pcie_xilinx_config_address() - Calculate the address of a config access
46  * @pcie: Pointer to the PCI controller state
47  * @bdf: Identifies the PCIe device to access
48  * @offset: The offset into the device's configuration space
49  * @paddress: Pointer to the pointer to write the calculates address to
50  *
51  * Calculates the address that should be accessed to perform a PCIe
52  * configuration space access for a given device identified by the PCIe
53  * controller device @pcie and the bus, device & function numbers in @bdf. If
54  * access to the device is not valid then the function will return an error
55  * code. Otherwise the address to access will be written to the pointer pointed
56  * to by @paddress.
57  *
58  * Return: 0 on success, else -ENODEV
59  */
60 static int pcie_xilinx_config_address(struct xilinx_pcie *pcie, pci_dev_t bdf,
61 				      uint offset, void **paddress)
62 {
63 	unsigned int bus = PCI_BUS(bdf);
64 	unsigned int dev = PCI_DEV(bdf);
65 	unsigned int func = PCI_FUNC(bdf);
66 	void *addr;
67 
68 	if ((bus > 0) && !pcie_xilinx_link_up(pcie))
69 		return -ENODEV;
70 
71 	/*
72 	 * Busses 0 (host-PCIe bridge) & 1 (its immediate child) are
73 	 * limited to a single device each.
74 	 */
75 	if ((bus < 2) && (dev > 0))
76 		return -ENODEV;
77 
78 	addr = pcie->cfg_base;
79 	addr += bus << 20;
80 	addr += dev << 15;
81 	addr += func << 12;
82 	addr += offset;
83 	*paddress = addr;
84 
85 	return 0;
86 }
87 
88 /**
89  * pcie_xilinx_read_config() - Read from configuration space
90  * @pcie: Pointer to the PCI controller state
91  * @bdf: Identifies the PCIe device to access
92  * @offset: The offset into the device's configuration space
93  * @valuep: A pointer at which to store the read value
94  * @size: Indicates the size of access to perform
95  *
96  * Read a value of size @size from offset @offset within the configuration
97  * space of the device identified by the bus, device & function numbers in @bdf
98  * on the PCI bus @bus.
99  *
100  * Return: 0 on success, else -ENODEV or -EINVAL
101  */
102 static int pcie_xilinx_read_config(struct udevice *bus, pci_dev_t bdf,
103 				   uint offset, ulong *valuep,
104 				   enum pci_size_t size)
105 {
106 	struct xilinx_pcie *pcie = dev_get_priv(bus);
107 	void *address;
108 	int err;
109 
110 	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
111 	if (err < 0) {
112 		*valuep = pci_get_ff(size);
113 		return 0;
114 	}
115 
116 	switch (size) {
117 	case PCI_SIZE_8:
118 		*valuep = __raw_readb(address);
119 		return 0;
120 	case PCI_SIZE_16:
121 		*valuep = __raw_readw(address);
122 		return 0;
123 	case PCI_SIZE_32:
124 		*valuep = __raw_readl(address);
125 		return 0;
126 	default:
127 		return -EINVAL;
128 	}
129 }
130 
131 /**
132  * pcie_xilinx_write_config() - Write to configuration space
133  * @pcie: Pointer to the PCI controller state
134  * @bdf: Identifies the PCIe device to access
135  * @offset: The offset into the device's configuration space
136  * @value: The value to write
137  * @size: Indicates the size of access to perform
138  *
139  * Write the value @value of size @size from offset @offset within the
140  * configuration space of the device identified by the bus, device & function
141  * numbers in @bdf on the PCI bus @bus.
142  *
143  * Return: 0 on success, else -ENODEV or -EINVAL
144  */
145 static int pcie_xilinx_write_config(struct udevice *bus, pci_dev_t bdf,
146 				    uint offset, ulong value,
147 				    enum pci_size_t size)
148 {
149 	struct xilinx_pcie *pcie = dev_get_priv(bus);
150 	void *address;
151 	int err;
152 
153 	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
154 	if (err < 0)
155 		return 0;
156 
157 	switch (size) {
158 	case PCI_SIZE_8:
159 		__raw_writeb(value, address);
160 		return 0;
161 	case PCI_SIZE_16:
162 		__raw_writew(value, address);
163 		return 0;
164 	case PCI_SIZE_32:
165 		__raw_writel(value, address);
166 		return 0;
167 	default:
168 		return -EINVAL;
169 	}
170 }
171 
172 /**
173  * pcie_xilinx_ofdata_to_platdata() - Translate from DT to device state
174  * @dev: A pointer to the device being operated on
175  *
176  * Translate relevant data from the device tree pertaining to device @dev into
177  * state that the driver will later make use of. This state is stored in the
178  * device's private data structure.
179  *
180  * Return: 0 on success, else -EINVAL
181  */
182 static int pcie_xilinx_ofdata_to_platdata(struct udevice *dev)
183 {
184 	struct xilinx_pcie *pcie = dev_get_priv(dev);
185 	struct fdt_resource reg_res;
186 	DECLARE_GLOBAL_DATA_PTR;
187 	int err;
188 
189 	err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
190 			       0, &reg_res);
191 	if (err < 0) {
192 		error("\"reg\" resource not found\n");
193 		return err;
194 	}
195 
196 	pcie->cfg_base = map_physmem(reg_res.start,
197 				     fdt_resource_size(&reg_res),
198 				     MAP_NOCACHE);
199 
200 	return 0;
201 }
202 
203 static const struct dm_pci_ops pcie_xilinx_ops = {
204 	.read_config	= pcie_xilinx_read_config,
205 	.write_config	= pcie_xilinx_write_config,
206 };
207 
208 static const struct udevice_id pcie_xilinx_ids[] = {
209 	{ .compatible = "xlnx,axi-pcie-host-1.00.a" },
210 	{ }
211 };
212 
213 U_BOOT_DRIVER(pcie_xilinx) = {
214 	.name			= "pcie_xilinx",
215 	.id			= UCLASS_PCI,
216 	.of_match		= pcie_xilinx_ids,
217 	.ops			= &pcie_xilinx_ops,
218 	.ofdata_to_platdata	= pcie_xilinx_ofdata_to_platdata,
219 	.priv_auto_alloc_size	= sizeof(struct xilinx_pcie),
220 };
221