1 /* 2 * PCIe driver for Marvell MVEBU SoCs 3 * 4 * Based on Barebox drivers/pci/pci-mvebu.c 5 * 6 * Ported to U-Boot by: 7 * Anton Schubert <anton.schubert@gmx.de> 8 * Stefan Roese <sr@denx.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0 11 */ 12 13 #include <common.h> 14 #include <pci.h> 15 #include <asm/errno.h> 16 #include <asm/io.h> 17 #include <asm/arch/cpu.h> 18 #include <asm/arch/soc.h> 19 #include <linux/mbus.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 /* PCIe unit register offsets */ 24 #define SELECT(x, n) ((x >> n) & 1UL) 25 26 #define PCIE_DEV_ID_OFF 0x0000 27 #define PCIE_CMD_OFF 0x0004 28 #define PCIE_DEV_REV_OFF 0x0008 29 #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) 30 #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) 31 #define PCIE_CAPAB_OFF 0x0060 32 #define PCIE_CTRL_STAT_OFF 0x0068 33 #define PCIE_HEADER_LOG_4_OFF 0x0128 34 #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) 35 #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) 36 #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) 37 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) 38 #define PCIE_WIN5_CTRL_OFF 0x1880 39 #define PCIE_WIN5_BASE_OFF 0x1884 40 #define PCIE_WIN5_REMAP_OFF 0x188c 41 #define PCIE_CONF_ADDR_OFF 0x18f8 42 #define PCIE_CONF_ADDR_EN BIT(31) 43 #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) 44 #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) 45 #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) 46 #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) 47 #define PCIE_CONF_ADDR(dev, reg) \ 48 (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \ 49 PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \ 50 PCIE_CONF_ADDR_EN) 51 #define PCIE_CONF_DATA_OFF 0x18fc 52 #define PCIE_MASK_OFF 0x1910 53 #define PCIE_MASK_ENABLE_INTS (0xf << 24) 54 #define PCIE_CTRL_OFF 0x1a00 55 #define PCIE_CTRL_X1_MODE BIT(0) 56 #define PCIE_STAT_OFF 0x1a04 57 #define PCIE_STAT_BUS (0xff << 8) 58 #define PCIE_STAT_DEV (0x1f << 16) 59 #define PCIE_STAT_LINK_DOWN BIT(0) 60 #define PCIE_DEBUG_CTRL 0x1a60 61 #define PCIE_DEBUG_SOFT_RESET BIT(20) 62 63 struct resource { 64 u32 start; 65 u32 end; 66 }; 67 68 struct mvebu_pcie { 69 struct pci_controller hose; 70 char *name; 71 void __iomem *base; 72 void __iomem *membase; 73 struct resource mem; 74 void __iomem *iobase; 75 u32 port; 76 u32 lane; 77 u32 lane_mask; 78 pci_dev_t dev; 79 }; 80 81 #define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci) 82 83 /* 84 * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped 85 * into SoCs address space. Each controller will map 32M of MEM 86 * and 64K of I/O space when registered. 87 */ 88 static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE; 89 #define PCIE_MEM_SIZE (32 << 20) 90 91 #if defined(CONFIG_ARMADA_38X) 92 #define PCIE_BASE(if) \ 93 ((if) == 0 ? \ 94 MVEBU_REG_PCIE_BASE + 0x40000 : \ 95 MVEBU_REG_PCIE_BASE + 0x4000 * (if)) 96 97 /* 98 * On A38x MV6820 these PEX ports are supported: 99 * 0 - Port 0.0 100 * 1 - Port 0.1 101 * 2 - Port 0.2 102 */ 103 #define MAX_PEX 3 104 static struct mvebu_pcie pcie_bus[MAX_PEX]; 105 106 static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, 107 int *mem_target, int *mem_attr) 108 { 109 u8 port[] = { 0, 1, 2 }; 110 u8 lane[] = { 0, 0, 0 }; 111 u8 target[] = { 8, 4, 4 }; 112 u8 attr[] = { 0xe8, 0xe8, 0xd8 }; 113 114 pcie->port = port[pex_idx]; 115 pcie->lane = lane[pex_idx]; 116 *mem_target = target[pex_idx]; 117 *mem_attr = attr[pex_idx]; 118 } 119 #else 120 #define PCIE_BASE(if) \ 121 ((if) < 8 ? \ 122 (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \ 123 (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000)) 124 125 /* 126 * On AXP MV78460 these PEX ports are supported: 127 * 0 - Port 0.0 128 * 1 - Port 0.1 129 * 2 - Port 0.2 130 * 3 - Port 0.3 131 * 4 - Port 1.0 132 * 5 - Port 1.1 133 * 6 - Port 1.2 134 * 7 - Port 1.3 135 * 8 - Port 2.0 136 * 9 - Port 3.0 137 */ 138 #define MAX_PEX 10 139 static struct mvebu_pcie pcie_bus[MAX_PEX]; 140 141 static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, 142 int *mem_target, int *mem_attr) 143 { 144 u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 }; 145 u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 }; 146 u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 }; 147 u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78, 148 0xe8, 0xd8, 0xb8, 0x78, 149 0xf8, 0xf8 }; 150 151 pcie->port = port[pex_idx]; 152 pcie->lane = lane[pex_idx]; 153 *mem_target = target[pex_idx]; 154 *mem_attr = attr[pex_idx]; 155 } 156 #endif 157 158 static int mvebu_pex_unit_is_x4(int pex_idx) 159 { 160 int pex_unit = pex_idx < 9 ? pex_idx >> 2 : 3; 161 u32 mask = (0x0f << (pex_unit * 8)); 162 163 return (readl(COMPHY_REFCLK_ALIGNMENT) & mask) == mask; 164 } 165 166 static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie) 167 { 168 u32 val; 169 val = readl(pcie->base + PCIE_STAT_OFF); 170 return !(val & PCIE_STAT_LINK_DOWN); 171 } 172 173 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno) 174 { 175 u32 stat; 176 177 stat = readl(pcie->base + PCIE_STAT_OFF); 178 stat &= ~PCIE_STAT_BUS; 179 stat |= busno << 8; 180 writel(stat, pcie->base + PCIE_STAT_OFF); 181 } 182 183 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno) 184 { 185 u32 stat; 186 187 stat = readl(pcie->base + PCIE_STAT_OFF); 188 stat &= ~PCIE_STAT_DEV; 189 stat |= devno << 16; 190 writel(stat, pcie->base + PCIE_STAT_OFF); 191 } 192 193 static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie) 194 { 195 u32 stat; 196 197 stat = readl(pcie->base + PCIE_STAT_OFF); 198 return (stat & PCIE_STAT_BUS) >> 8; 199 } 200 201 static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie) 202 { 203 u32 stat; 204 205 stat = readl(pcie->base + PCIE_STAT_OFF); 206 return (stat & PCIE_STAT_DEV) >> 16; 207 } 208 209 static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose) 210 { 211 return container_of(hose, struct mvebu_pcie, hose); 212 } 213 214 static int mvebu_pcie_read_config_dword(struct pci_controller *hose, 215 pci_dev_t dev, int offset, u32 *val) 216 { 217 struct mvebu_pcie *pcie = hose_to_pcie(hose); 218 int local_bus = PCI_BUS(pcie->dev); 219 int local_dev = PCI_DEV(pcie->dev); 220 u32 reg; 221 222 /* Only allow one other device besides the local one on the local bus */ 223 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { 224 if (local_dev == 0 && PCI_DEV(dev) != 1) { 225 /* 226 * If local dev is 0, the first other dev can 227 * only be 1 228 */ 229 *val = 0xffffffff; 230 return 1; 231 } else if (local_dev != 0 && PCI_DEV(dev) != 0) { 232 /* 233 * If local dev is not 0, the first other dev can 234 * only be 0 235 */ 236 *val = 0xffffffff; 237 return 1; 238 } 239 } 240 241 /* write address */ 242 reg = PCIE_CONF_ADDR(dev, offset); 243 writel(reg, pcie->base + PCIE_CONF_ADDR_OFF); 244 *val = readl(pcie->base + PCIE_CONF_DATA_OFF); 245 246 return 0; 247 } 248 249 static int mvebu_pcie_write_config_dword(struct pci_controller *hose, 250 pci_dev_t dev, int offset, u32 val) 251 { 252 struct mvebu_pcie *pcie = hose_to_pcie(hose); 253 int local_bus = PCI_BUS(pcie->dev); 254 int local_dev = PCI_DEV(pcie->dev); 255 256 /* Only allow one other device besides the local one on the local bus */ 257 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { 258 if (local_dev == 0 && PCI_DEV(dev) != 1) { 259 /* 260 * If local dev is 0, the first other dev can 261 * only be 1 262 */ 263 return 1; 264 } else if (local_dev != 0 && PCI_DEV(dev) != 0) { 265 /* 266 * If local dev is not 0, the first other dev can 267 * only be 0 268 */ 269 return 1; 270 } 271 } 272 273 writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF); 274 writel(val, pcie->base + PCIE_CONF_DATA_OFF); 275 276 return 0; 277 } 278 279 /* 280 * Setup PCIE BARs and Address Decode Wins: 281 * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks 282 * WIN[0-3] -> DRAM bank[0-3] 283 */ 284 static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) 285 { 286 const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info(); 287 u32 size; 288 int i; 289 290 /* First, disable and clear BARs and windows. */ 291 for (i = 1; i < 3; i++) { 292 writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i)); 293 writel(0, pcie->base + PCIE_BAR_LO_OFF(i)); 294 writel(0, pcie->base + PCIE_BAR_HI_OFF(i)); 295 } 296 297 for (i = 0; i < 5; i++) { 298 writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i)); 299 writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i)); 300 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); 301 } 302 303 writel(0, pcie->base + PCIE_WIN5_CTRL_OFF); 304 writel(0, pcie->base + PCIE_WIN5_BASE_OFF); 305 writel(0, pcie->base + PCIE_WIN5_REMAP_OFF); 306 307 /* Setup windows for DDR banks. Count total DDR size on the fly. */ 308 size = 0; 309 for (i = 0; i < dram->num_cs; i++) { 310 const struct mbus_dram_window *cs = dram->cs + i; 311 312 writel(cs->base & 0xffff0000, 313 pcie->base + PCIE_WIN04_BASE_OFF(i)); 314 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); 315 writel(((cs->size - 1) & 0xffff0000) | 316 (cs->mbus_attr << 8) | 317 (dram->mbus_dram_target_id << 4) | 1, 318 pcie->base + PCIE_WIN04_CTRL_OFF(i)); 319 320 size += cs->size; 321 } 322 323 /* Round up 'size' to the nearest power of two. */ 324 if ((size & (size - 1)) != 0) 325 size = 1 << fls(size); 326 327 /* Setup BAR[1] to all DRAM banks. */ 328 writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1)); 329 writel(0, pcie->base + PCIE_BAR_HI_OFF(1)); 330 writel(((size - 1) & 0xffff0000) | 0x1, 331 pcie->base + PCIE_BAR_CTRL_OFF(1)); 332 } 333 334 void pci_init_board(void) 335 { 336 int mem_target, mem_attr, i; 337 int bus = 0; 338 u32 reg; 339 u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4); 340 341 /* Check SoC Control Power State */ 342 debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n", 343 __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1), 344 SELECT(soc_ctrl, 2)); 345 346 for (i = 0; i < MAX_PEX; i++) { 347 struct mvebu_pcie *pcie = &pcie_bus[i]; 348 struct pci_controller *hose = &pcie->hose; 349 350 /* Get port number, lane number and memory target / attr */ 351 mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr); 352 353 /* Don't read at all from pci registers if port power is down */ 354 if (pcie->lane == 0 && SELECT(soc_ctrl, pcie->port) == 0) { 355 i += 3; 356 debug("%s: skipping port %d\n", __func__, pcie->port); 357 continue; 358 } 359 360 pcie->base = (void __iomem *)PCIE_BASE(i); 361 362 /* Check link and skip ports that have no link */ 363 if (!mvebu_pcie_link_up(pcie)) { 364 debug("%s: PCIe %d.%d - down\n", __func__, 365 pcie->port, pcie->lane); 366 continue; 367 } 368 debug("%s: PCIe %d.%d - up, base %08x\n", __func__, 369 pcie->port, pcie->lane, (u32)pcie->base); 370 371 /* Read Id info and local bus/dev */ 372 debug("direct conf read %08x, local bus %d, local dev %d\n", 373 readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie), 374 mvebu_pcie_get_local_dev_nr(pcie)); 375 376 mvebu_pcie_set_local_bus_nr(pcie, bus); 377 mvebu_pcie_set_local_dev_nr(pcie, 0); 378 pcie->dev = PCI_BDF(bus, 0, 0); 379 380 pcie->mem.start = (u32)mvebu_pcie_membase; 381 pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1; 382 mvebu_pcie_membase += PCIE_MEM_SIZE; 383 384 if (mvebu_mbus_add_window_by_id(mem_target, mem_attr, 385 (phys_addr_t)pcie->mem.start, 386 PCIE_MEM_SIZE)) { 387 printf("PCIe unable to add mbus window for mem at %08x+%08x\n", 388 (u32)pcie->mem.start, PCIE_MEM_SIZE); 389 } 390 391 /* Setup windows and configure host bridge */ 392 mvebu_pcie_setup_wins(pcie); 393 394 /* Master + slave enable. */ 395 reg = readl(pcie->base + PCIE_CMD_OFF); 396 reg |= PCI_COMMAND_MEMORY; 397 reg |= PCI_COMMAND_MASTER; 398 reg |= BIT(10); /* disable interrupts */ 399 writel(reg, pcie->base + PCIE_CMD_OFF); 400 401 /* Setup U-Boot PCI Controller */ 402 hose->first_busno = 0; 403 hose->current_busno = bus; 404 405 /* PCI memory space */ 406 pci_set_region(hose->regions + 0, pcie->mem.start, 407 pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM); 408 pci_set_region(hose->regions + 1, 409 0, 0, 410 gd->ram_size, 411 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); 412 hose->region_count = 2; 413 414 pci_set_ops(hose, 415 pci_hose_read_config_byte_via_dword, 416 pci_hose_read_config_word_via_dword, 417 mvebu_pcie_read_config_dword, 418 pci_hose_write_config_byte_via_dword, 419 pci_hose_write_config_word_via_dword, 420 mvebu_pcie_write_config_dword); 421 pci_register_hose(hose); 422 423 hose->last_busno = pci_hose_scan(hose); 424 425 /* Set BAR0 to internal registers */ 426 writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); 427 writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); 428 429 bus = hose->last_busno + 1; 430 431 /* need to skip more for X4 links, otherwise scan will hang */ 432 if (mvebu_soc_family() == MVEBU_SOC_AXP) { 433 if (mvebu_pex_unit_is_x4(i)) 434 i += 3; 435 } 436 } 437 } 438