xref: /openbmc/u-boot/drivers/pci/pci_internal.h (revision ae485b54)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Internal PCI functions, not exported outside drivers/pci
4  *
5  * Copyright (c) 2015 Google, Inc
6  * Written by Simon Glass <sjg@chromium.org>
7  */
8 
9 #ifndef __pci_internal_h
10 #define __pci_internal_h
11 
12 /**
13  * dm_pciauto_prescan_setup_bridge() - Set up a bridge for scanning
14  *
15  * This gets a bridge ready so that its downstream devices can be scanned.
16  * It sets up the bus number and memory range registers. Once the scan is
17  * completed, dm_pciauto_postscan_setup_bridge() should be called.
18  *
19  * @dev:	Bridge device to be scanned
20  * @sub_bus:	Bus number of the 'other side' of the bridge
21  */
22 void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus);
23 
24 /**
25  * dm_pciauto_postscan_setup_bridge() - Finish set up of a bridge after scanning
26  *
27  * This should be called after a bus scan is complete. It adjusts the memory
28  * ranges to fit with the devices actually found on the other side (downstream)
29  * of the bridge.
30  *
31  * @dev:	Bridge device that was scanned
32  * @sub_bus:	Bus number of the 'other side' of the bridge
33  */
34 void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus);
35 
36 /**
37  * dm_pciauto_config_device() - Configure a PCI device ready for use
38  *
39  * If the device is a bridge, downstream devices will be probed.
40  *
41  * @dev:	Device to configure
42  * @return the maximum PCI bus number found by this device. If there are no
43  * bridges, this just returns the device's bus number. If the device is a
44  * bridge then it will return a larger number, depending on the devices on
45  * that bridge. On error, returns a -ve error number.
46  */
47 int dm_pciauto_config_device(struct udevice *dev);
48 
49 /**
50  * pci_get_bus() - Get a pointer to a bus, given its number
51  *
52  * This looks up a PCI bus based on its bus number. The bus is probed if
53  * necessary.
54  *
55  * @busnum:	PCI bus number to look up
56  * @busp:	Returns PCI bus on success
57  * @return 0 on success, or -ve error
58  */
59 int pci_get_bus(int busnum, struct udevice **busp);
60 
61 #endif
62