xref: /openbmc/u-boot/drivers/pci/pci_auto_old.c (revision 08592136)
1 /*
2  * PCI autoconfiguration library (legacy version, do not change)
3  *
4  * Author: Matt Porter <mporter@mvista.com>
5  *
6  * Copyright 2000 MontaVista Software Inc.
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <errno.h>
13 #include <pci.h>
14 
15 /*
16  * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
17  * and change pci_auto.c.
18  */
19 
20 /* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
21 #ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
22 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
23 #endif
24 
25 /*
26  *
27  */
28 
29 void pciauto_setup_device(struct pci_controller *hose,
30 			  pci_dev_t dev, int bars_num,
31 			  struct pci_region *mem,
32 			  struct pci_region *prefetch,
33 			  struct pci_region *io)
34 {
35 	u32 bar_response;
36 	pci_size_t bar_size;
37 	u16 cmdstat = 0;
38 	int bar, bar_nr = 0;
39 #ifndef CONFIG_PCI_ENUM_ONLY
40 	u8 header_type;
41 	int rom_addr;
42 	pci_addr_t bar_value;
43 	struct pci_region *bar_res;
44 	int found_mem64 = 0;
45 #endif
46 	u16 class;
47 
48 	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
49 	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
50 
51 	for (bar = PCI_BASE_ADDRESS_0;
52 		bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
53 		/* Tickle the BAR and get the response */
54 #ifndef CONFIG_PCI_ENUM_ONLY
55 		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
56 #endif
57 		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
58 
59 		/* If BAR is not implemented go to the next BAR */
60 		if (!bar_response)
61 			continue;
62 
63 #ifndef CONFIG_PCI_ENUM_ONLY
64 		found_mem64 = 0;
65 #endif
66 
67 		/* Check the BAR type and set our address mask */
68 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
69 			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
70 				   & 0xffff) + 1;
71 #ifndef CONFIG_PCI_ENUM_ONLY
72 			bar_res = io;
73 #endif
74 
75 			debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
76 			      bar_nr, (unsigned long long)bar_size);
77 		} else {
78 			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
79 			     PCI_BASE_ADDRESS_MEM_TYPE_64) {
80 				u32 bar_response_upper;
81 				u64 bar64;
82 
83 #ifndef CONFIG_PCI_ENUM_ONLY
84 				pci_hose_write_config_dword(hose, dev, bar + 4,
85 					0xffffffff);
86 #endif
87 				pci_hose_read_config_dword(hose, dev, bar + 4,
88 					&bar_response_upper);
89 
90 				bar64 = ((u64)bar_response_upper << 32) | bar_response;
91 
92 				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
93 #ifndef CONFIG_PCI_ENUM_ONLY
94 				found_mem64 = 1;
95 #endif
96 			} else {
97 				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
98 			}
99 #ifndef CONFIG_PCI_ENUM_ONLY
100 			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
101 				bar_res = prefetch;
102 			else
103 				bar_res = mem;
104 
105 			debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
106 			      bar_nr, bar_res == prefetch ? "Prf" : "Mem",
107 			      (unsigned long long)bar_size);
108 #endif
109 		}
110 
111 #ifndef CONFIG_PCI_ENUM_ONLY
112 		if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
113 			/* Write it out and update our limit */
114 			pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
115 
116 			if (found_mem64) {
117 				bar += 4;
118 #ifdef CONFIG_SYS_PCI_64BIT
119 				pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
120 #else
121 				/*
122 				 * If we are a 64-bit decoder then increment to the
123 				 * upper 32 bits of the bar and force it to locate
124 				 * in the lower 4GB of memory.
125 				 */
126 				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
127 #endif
128 			}
129 
130 		}
131 #endif
132 		cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
133 			PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
134 
135 		debug("\n");
136 
137 		bar_nr++;
138 	}
139 
140 #ifndef CONFIG_PCI_ENUM_ONLY
141 	/* Configure the expansion ROM address */
142 	pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
143 	header_type &= 0x7f;
144 	if (header_type != PCI_HEADER_TYPE_CARDBUS) {
145 		rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
146 			   PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
147 		pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
148 		pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
149 		if (bar_response) {
150 			bar_size = -(bar_response & ~1);
151 			debug("PCI Autoconfig: ROM, size=%#x, ",
152 			      (unsigned int)bar_size);
153 			if (pciauto_region_allocate(mem, bar_size,
154 						    &bar_value) == 0) {
155 				pci_hose_write_config_dword(hose, dev, rom_addr,
156 							    bar_value);
157 			}
158 			cmdstat |= PCI_COMMAND_MEMORY;
159 			debug("\n");
160 		}
161 	}
162 #endif
163 
164 	/* PCI_COMMAND_IO must be set for VGA device */
165 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
166 	if (class == PCI_CLASS_DISPLAY_VGA)
167 		cmdstat |= PCI_COMMAND_IO;
168 
169 	pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
170 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
171 		CONFIG_SYS_PCI_CACHE_LINE_SIZE);
172 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
173 }
174 
175 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
176 					 pci_dev_t dev, int sub_bus)
177 {
178 	struct pci_region *pci_mem;
179 	struct pci_region *pci_prefetch;
180 	struct pci_region *pci_io;
181 	u16 cmdstat, prefechable_64;
182 
183 	pci_mem = hose->pci_mem;
184 	pci_prefetch = hose->pci_prefetch;
185 	pci_io = hose->pci_io;
186 
187 	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
188 	pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
189 				&prefechable_64);
190 	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
191 
192 	/* Configure bus number registers */
193 	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
194 				   PCI_BUS(dev) - hose->first_busno);
195 	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
196 				   sub_bus - hose->first_busno);
197 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
198 
199 	if (pci_mem) {
200 		/* Round memory allocator to 1MB boundary */
201 		pciauto_region_align(pci_mem, 0x100000);
202 
203 		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
204 		pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
205 					(pci_mem->bus_lower & 0xfff00000) >> 16);
206 
207 		cmdstat |= PCI_COMMAND_MEMORY;
208 	}
209 
210 	if (pci_prefetch) {
211 		/* Round memory allocator to 1MB boundary */
212 		pciauto_region_align(pci_prefetch, 0x100000);
213 
214 		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
215 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
216 					(pci_prefetch->bus_lower & 0xfff00000) >> 16);
217 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
218 #ifdef CONFIG_SYS_PCI_64BIT
219 			pci_hose_write_config_dword(hose, dev,
220 					PCI_PREF_BASE_UPPER32,
221 					pci_prefetch->bus_lower >> 32);
222 #else
223 			pci_hose_write_config_dword(hose, dev,
224 					PCI_PREF_BASE_UPPER32,
225 					0x0);
226 #endif
227 
228 		cmdstat |= PCI_COMMAND_MEMORY;
229 	} else {
230 		/* We don't support prefetchable memory for now, so disable */
231 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
232 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
233 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
234 			pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
235 			pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
236 		}
237 	}
238 
239 	if (pci_io) {
240 		/* Round I/O allocator to 4KB boundary */
241 		pciauto_region_align(pci_io, 0x1000);
242 
243 		pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
244 					(pci_io->bus_lower & 0x0000f000) >> 8);
245 		pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
246 					(pci_io->bus_lower & 0xffff0000) >> 16);
247 
248 		cmdstat |= PCI_COMMAND_IO;
249 	}
250 
251 	/* Enable memory and I/O accesses, enable bus master */
252 	pci_hose_write_config_word(hose, dev, PCI_COMMAND,
253 					cmdstat | PCI_COMMAND_MASTER);
254 }
255 
256 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
257 					  pci_dev_t dev, int sub_bus)
258 {
259 	struct pci_region *pci_mem;
260 	struct pci_region *pci_prefetch;
261 	struct pci_region *pci_io;
262 
263 	pci_mem = hose->pci_mem;
264 	pci_prefetch = hose->pci_prefetch;
265 	pci_io = hose->pci_io;
266 
267 	/* Configure bus number registers */
268 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
269 				   sub_bus - hose->first_busno);
270 
271 	if (pci_mem) {
272 		/* Round memory allocator to 1MB boundary */
273 		pciauto_region_align(pci_mem, 0x100000);
274 
275 		pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
276 				(pci_mem->bus_lower - 1) >> 16);
277 	}
278 
279 	if (pci_prefetch) {
280 		u16 prefechable_64;
281 
282 		pci_hose_read_config_word(hose, dev,
283 					PCI_PREF_MEMORY_LIMIT,
284 					&prefechable_64);
285 		prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
286 
287 		/* Round memory allocator to 1MB boundary */
288 		pciauto_region_align(pci_prefetch, 0x100000);
289 
290 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
291 				(pci_prefetch->bus_lower - 1) >> 16);
292 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
293 #ifdef CONFIG_SYS_PCI_64BIT
294 			pci_hose_write_config_dword(hose, dev,
295 					PCI_PREF_LIMIT_UPPER32,
296 					(pci_prefetch->bus_lower - 1) >> 32);
297 #else
298 			pci_hose_write_config_dword(hose, dev,
299 					PCI_PREF_LIMIT_UPPER32,
300 					0x0);
301 #endif
302 	}
303 
304 	if (pci_io) {
305 		/* Round I/O allocator to 4KB boundary */
306 		pciauto_region_align(pci_io, 0x1000);
307 
308 		pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
309 				((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
310 		pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
311 				((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
312 	}
313 }
314 
315 
316 /*
317  * HJF: Changed this to return int. I think this is required
318  * to get the correct result when scanning bridges
319  */
320 int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
321 {
322 	struct pci_region *pci_mem;
323 	struct pci_region *pci_prefetch;
324 	struct pci_region *pci_io;
325 	unsigned int sub_bus = PCI_BUS(dev);
326 	unsigned short class;
327 	int n;
328 
329 	pci_mem = hose->pci_mem;
330 	pci_prefetch = hose->pci_prefetch;
331 	pci_io = hose->pci_io;
332 
333 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
334 
335 	switch (class) {
336 	case PCI_CLASS_BRIDGE_PCI:
337 		debug("PCI Autoconfig: Found P2P bridge, device %d\n",
338 		      PCI_DEV(dev));
339 
340 		pciauto_setup_device(hose, dev, 2, pci_mem,
341 				     pci_prefetch, pci_io);
342 
343 		/* Passing in current_busno allows for sibling P2P bridges */
344 		hose->current_busno++;
345 		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
346 		/*
347 		 * need to figure out if this is a subordinate bridge on the bus
348 		 * to be able to properly set the pri/sec/sub bridge registers.
349 		 */
350 		n = pci_hose_scan_bus(hose, hose->current_busno);
351 
352 		/* figure out the deepest we've gone for this leg */
353 		sub_bus = max((unsigned int)n, sub_bus);
354 		pciauto_postscan_setup_bridge(hose, dev, sub_bus);
355 
356 		sub_bus = hose->current_busno;
357 		break;
358 
359 	case PCI_CLASS_BRIDGE_CARDBUS:
360 		/*
361 		 * just do a minimal setup of the bridge,
362 		 * let the OS take care of the rest
363 		 */
364 		pciauto_setup_device(hose, dev, 0, pci_mem,
365 				     pci_prefetch, pci_io);
366 
367 		debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
368 		      PCI_DEV(dev));
369 
370 		hose->current_busno++;
371 		break;
372 
373 #if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
374 	case PCI_CLASS_BRIDGE_OTHER:
375 		debug("PCI Autoconfig: Skipping bridge device %d\n",
376 		      PCI_DEV(dev));
377 		break;
378 #endif
379 #if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
380 	case PCI_CLASS_BRIDGE_OTHER:
381 		/*
382 		 * The host/PCI bridge 1 seems broken in 8349 - it presents
383 		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
384 		 * device claiming resources io/mem/irq.. we only allow for
385 		 * the PIMMR window to be allocated (BAR0 - 1MB size)
386 		 */
387 		debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
388 		pciauto_setup_device(hose, dev, 0, hose->pci_mem,
389 			hose->pci_prefetch, hose->pci_io);
390 		break;
391 #endif
392 
393 	case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
394 		debug("PCI AutoConfig: Found PowerPC device\n");
395 
396 	default:
397 		pciauto_setup_device(hose, dev, 6, pci_mem,
398 				     pci_prefetch, pci_io);
399 		break;
400 	}
401 
402 	return sub_bus;
403 }
404