xref: /openbmc/u-boot/drivers/pci/fsl_pci_init.c (revision 61fb15c5)
1 /*
2  * Copyright 2007 Freescale Semiconductor, Inc.
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * Version 2 as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  *
13  * You should have received a copy of the GNU General Public License
14  * along with this program; if not, write to the Free Software
15  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
16  * MA 02111-1307 USA
17  */
18 
19 #include <common.h>
20 
21 #ifdef CONFIG_FSL_PCI_INIT
22 
23 /*
24  * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
25  *
26  * Initialize controller and call the common driver/pci pci_hose_scan to
27  * scan for bridges and devices.
28  *
29  * Hose fields which need to be pre-initialized by board specific code:
30  *   regions[]
31  *   first_busno
32  *
33  * Fields updated:
34  *   last_busno
35  */
36 
37 #include <pci.h>
38 #include <asm/immap_fsl_pci.h>
39 
40 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
41 				pci_dev_t dev, int sub_bus);
42 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
43 				pci_dev_t dev, int sub_bus);
44 
45 void pciauto_config_init(struct pci_controller *hose);
46 void
47 fsl_pci_init(struct pci_controller *hose)
48 {
49 	u16 temp16;
50 	u32 temp32;
51 	int busno = hose->first_busno;
52 	int enabled;
53 	u16 ltssm;
54 	u8 temp8;
55 	int r;
56 	int bridge;
57 	int inbound = 0;
58 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
59 	pci_dev_t dev = PCI_BDF(busno,0,0);
60 
61 	/* Initialize ATMU registers based on hose regions and flags */
62 	volatile pot_t *po=&pci->pot[1];	/* skip 0 */
63 	volatile pit_t *pi=&pci->pit[0];	/* ranges from: 3 to 1 */
64 
65 #ifdef DEBUG
66 	int neg_link_w;
67 #endif
68 
69 	for (r=0; r<hose->region_count; r++) {
70 		if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
71 			pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
72 			pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
73 			pi->piwbear = 0;
74 			pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
75 				PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
76 				(__ilog2(hose->regions[r].size) - 1);
77 			pi++;
78 			inbound = hose->regions[r].size > 0;
79 		} else { /* Outbound */
80 			po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
81 			po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
82 			po->potear = 0;
83 			if (hose->regions[r].flags & PCI_REGION_IO)
84 				po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE |
85 					(__ilog2(hose->regions[r].size) - 1);
86 			else
87 				po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE |
88 					(__ilog2(hose->regions[r].size) - 1);
89 			po++;
90 		}
91 	}
92 
93 	pci_register_hose(hose);
94 	pciauto_config_init(hose);	/* grab pci_{mem,prefetch,io} */
95 	hose->current_busno = hose->first_busno;
96 
97 	pci->pedr = 0xffffffff;		/* Clear any errors */
98 	pci->peer = ~0x20140;		/* Enable All Error Interupts except
99 					 * - Master abort (pci)
100 					 * - Master PERR (pci)
101 					 * - ICCA (PCIe)
102 					 */
103 	pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
104 	temp32 |= 0xf000e;		/* set URR, FER, NFER (but not CER) */
105 	pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
106 
107 	pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
108 	bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
109 
110 	if ( bridge ) {
111 
112 		pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
113 		enabled = ltssm >= PCI_LTSSM_L0;
114 
115 #ifdef CONFIG_FSL_PCIE_RESET
116 		if (ltssm == 1) {
117 			int i;
118 			debug("....PCIe link error. "
119 			      "LTSSM=0x%02x.", ltssm);
120 			pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
121 			temp32 = pci->pdb_stat;
122 			udelay(100);
123 			debug("  Asserting PCIe reset @%x = %x\n",
124 			      &pci->pdb_stat, pci->pdb_stat);
125 			pci->pdb_stat &= ~0x08000000; /* clear reset */
126 			asm("sync;isync");
127 			for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
128 				pci_hose_read_config_word(hose, dev, PCI_LTSSM,
129 							&ltssm);
130 				udelay(1000);
131 				debug("....PCIe link error. "
132 				      "LTSSM=0x%02x.\n", ltssm);
133 			}
134 			enabled = ltssm >= PCI_LTSSM_L0;
135 		}
136 #endif
137 
138 		if (!enabled) {
139 			debug("....PCIE link error.  Skipping scan."
140 			      "LTSSM=0x%02x\n", ltssm);
141 			hose->last_busno = hose->first_busno;
142 			return;
143 		}
144 
145 		pci->pme_msg_det = 0xffffffff;
146 		pci->pme_msg_int_en = 0xffffffff;
147 #ifdef DEBUG
148 		pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
149 		neg_link_w = (temp16 & 0x3f0 ) >> 4;
150 		printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n",
151 		      ltssm, neg_link_w);
152 #endif
153 		hose->current_busno++; /* Start scan with secondary */
154 		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
155 
156 	}
157 
158 	/* Use generic setup_device to initialize standard pci regs,
159 	 * but do not allocate any windows since any BAR found (such
160 	 * as PCSRBAR) is not in this cpu's memory space.
161 	 */
162 
163 	pciauto_setup_device(hose, dev, 0, hose->pci_mem,
164 			     hose->pci_prefetch, hose->pci_io);
165 
166 	if (inbound) {
167 		pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
168 		pci_hose_write_config_word(hose, dev, PCI_COMMAND,
169 					   temp16 | PCI_COMMAND_MEMORY);
170 	}
171 
172 #ifndef CONFIG_PCI_NOSCAN
173 	printf ("               Scanning PCI bus %02x\n", hose->current_busno);
174 	hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
175 
176 	if ( bridge ) { /* update limit regs and subordinate busno */
177 		pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
178 	}
179 #else
180 	hose->last_busno = hose->current_busno;
181 #endif
182 
183 	/* Clear all error indications */
184 
185 	pci->pme_msg_det = 0xffffffff;
186 	pci->pedr = 0xffffffff;
187 
188 	pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
189 	if (temp16) {
190 		pci_hose_write_config_word(hose, dev,
191 					PCI_DSR, 0xffff);
192 	}
193 
194 	pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
195 	if (temp16) {
196 		pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
197 	}
198 }
199 
200 #endif /* CONFIG_FSL_PCI */
201