1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Driver for the Vitesse VSC9953 L2 Switch 7 */ 8 9 #include <asm/io.h> 10 #include <asm/fsl_serdes.h> 11 #include <fm_eth.h> 12 #include <fsl_memac.h> 13 #include <vsc9953.h> 14 15 static struct vsc9953_info vsc9953_l2sw = { 16 .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), 17 .port[1] = VSC9953_PORT_INFO_INITIALIZER(1), 18 .port[2] = VSC9953_PORT_INFO_INITIALIZER(2), 19 .port[3] = VSC9953_PORT_INFO_INITIALIZER(3), 20 .port[4] = VSC9953_PORT_INFO_INITIALIZER(4), 21 .port[5] = VSC9953_PORT_INFO_INITIALIZER(5), 22 .port[6] = VSC9953_PORT_INFO_INITIALIZER(6), 23 .port[7] = VSC9953_PORT_INFO_INITIALIZER(7), 24 .port[8] = VSC9953_PORT_INFO_INITIALIZER(8), 25 .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), 26 }; 27 28 void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus) 29 { 30 if (!VSC9953_PORT_CHECK(port)) 31 return; 32 33 vsc9953_l2sw.port[port].bus = bus; 34 } 35 36 void vsc9953_port_info_set_phy_address(int port, int address) 37 { 38 if (!VSC9953_PORT_CHECK(port)) 39 return; 40 41 vsc9953_l2sw.port[port].phyaddr = address; 42 } 43 44 void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int) 45 { 46 if (!VSC9953_PORT_CHECK(port)) 47 return; 48 49 vsc9953_l2sw.port[port].enet_if = phy_int; 50 } 51 52 void vsc9953_port_enable(int port) 53 { 54 if (!VSC9953_PORT_CHECK(port)) 55 return; 56 57 vsc9953_l2sw.port[port].enabled = 1; 58 } 59 60 void vsc9953_port_disable(int port) 61 { 62 if (!VSC9953_PORT_CHECK(port)) 63 return; 64 65 vsc9953_l2sw.port[port].enabled = 0; 66 } 67 68 static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, 69 int regnum, int value) 70 { 71 int timeout = 50000; 72 73 out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | 74 ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | 75 (0x1 << 1)); 76 asm("sync"); 77 78 while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) 79 udelay(1); 80 81 if (timeout == 0) 82 debug("Timeout waiting for MDIO write\n"); 83 } 84 85 static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, 86 int regnum) 87 { 88 int value = 0xFFFF; 89 int timeout = 50000; 90 91 while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) 92 udelay(1); 93 if (timeout == 0) { 94 debug("Timeout waiting for MDIO operation to finish\n"); 95 return value; 96 } 97 98 /* Put the address of the phy, and the register 99 * number into MIICMD 100 */ 101 out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | 102 ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | 103 (0x2 << 1)); 104 105 timeout = 50000; 106 /* Wait for the the indication that the read is done */ 107 while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) 108 udelay(1); 109 if (timeout == 0) 110 debug("Timeout waiting for MDIO read\n"); 111 112 /* Grab the value read from the PHY */ 113 value = in_le32(&phyregs->miimdata); 114 115 if ((value & 0x00030000) == 0) 116 return value & 0x0000ffff; 117 118 return value; 119 } 120 121 static int init_phy(struct eth_device *dev) 122 { 123 struct vsc9953_port_info *l2sw_port = dev->priv; 124 struct phy_device *phydev = NULL; 125 126 #ifdef CONFIG_PHYLIB 127 if (!l2sw_port->bus) 128 return 0; 129 phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev, 130 l2sw_port->enet_if); 131 if (!phydev) { 132 printf("Failed to connect\n"); 133 return -1; 134 } 135 136 phydev->supported &= SUPPORTED_10baseT_Half | 137 SUPPORTED_10baseT_Full | 138 SUPPORTED_100baseT_Half | 139 SUPPORTED_100baseT_Full | 140 SUPPORTED_1000baseT_Full; 141 phydev->advertising = phydev->supported; 142 143 l2sw_port->phydev = phydev; 144 145 phy_config(phydev); 146 #endif 147 148 return 0; 149 } 150 151 static int vsc9953_port_init(int port) 152 { 153 struct eth_device *dev; 154 155 /* Internal ports never have a PHY */ 156 if (VSC9953_INTERNAL_PORT_CHECK(port)) 157 return 0; 158 159 /* alloc eth device */ 160 dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); 161 if (!dev) 162 return 1; 163 164 sprintf(dev->name, "SW@PORT%d", port); 165 dev->priv = &vsc9953_l2sw.port[port]; 166 dev->init = NULL; 167 dev->halt = NULL; 168 dev->send = NULL; 169 dev->recv = NULL; 170 171 if (init_phy(dev)) { 172 free(dev); 173 return 1; 174 } 175 176 return 0; 177 } 178 179 void vsc9953_init(bd_t *bis) 180 { 181 u32 i, hdx_cfg = 0, phy_addr = 0; 182 int timeout; 183 struct vsc9953_system_reg *l2sys_reg; 184 struct vsc9953_qsys_reg *l2qsys_reg; 185 struct vsc9953_dev_gmii *l2dev_gmii_reg; 186 struct vsc9953_analyzer *l2ana_reg; 187 struct vsc9953_devcpu_gcb *l2dev_gcb; 188 189 l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + 190 VSC9953_DEV_GMII_OFFSET); 191 192 l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + 193 VSC9953_ANA_OFFSET); 194 195 l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + 196 VSC9953_SYS_OFFSET); 197 198 l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + 199 VSC9953_QSYS_OFFSET); 200 201 l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + 202 VSC9953_DEVCPU_GCB); 203 204 out_le32(&l2dev_gcb->chip_regs.soft_rst, 205 CONFIG_VSC9953_SOFT_SWC_RST_ENA); 206 timeout = 50000; 207 while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & 208 CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout) 209 udelay(1); /* busy wait for vsc9953 soft reset */ 210 if (timeout == 0) 211 debug("Timeout waiting for VSC9953 to reset\n"); 212 213 out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE | 214 CONFIG_VSC9953_MEM_INIT); 215 216 timeout = 50000; 217 while ((in_le32(&l2sys_reg->sys.reset_cfg) & 218 CONFIG_VSC9953_MEM_INIT) && --timeout) 219 udelay(1); /* busy wait for vsc9953 memory init */ 220 if (timeout == 0) 221 debug("Timeout waiting for VSC9953 memory to initialize\n"); 222 223 out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) 224 | CONFIG_VSC9953_CORE_ENABLE)); 225 226 /* VSC9953 Setting to be done once only */ 227 out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); 228 229 for (i = 0; i < VSC9953_MAX_PORTS; i++) { 230 if (vsc9953_port_init(i)) 231 printf("Failed to initialize l2switch port %d\n", i); 232 233 /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ 234 if (VSC9953_INTERNAL_PORT_CHECK(i)) { 235 out_le32(&l2ana_reg->pfc[i].pfc_cfg, 236 CONFIG_VSC9953_PFC_FC_QSGMII); 237 out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], 238 CONFIG_VSC9953_MAC_FC_CFG_QSGMII); 239 } else { 240 out_le32(&l2ana_reg->pfc[i].pfc_cfg, 241 CONFIG_VSC9953_PFC_FC); 242 out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], 243 CONFIG_VSC9953_MAC_FC_CFG); 244 } 245 out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, 246 CONFIG_VSC9953_CLOCK_CFG); 247 out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, 248 CONFIG_VSC9953_MAC_ENA_CFG); 249 out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, 250 CONFIG_VSC9953_MAC_MODE_CFG); 251 out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, 252 CONFIG_VSC9953_MAC_IFG_CFG); 253 /* mac_hdx_cfg varies with port id*/ 254 hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16)); 255 out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); 256 out_le32(&l2sys_reg->sys.front_port_mode[i], 257 CONFIG_VSC9953_FRONT_PORT_MODE); 258 out_le32(&l2qsys_reg->sys.switch_port_mode[i], 259 CONFIG_VSC9953_PORT_ENA); 260 out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, 261 CONFIG_VSC9953_MAC_MAX_LEN); 262 out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], 263 CONFIG_VSC9953_PAUSE_CFG); 264 /* WAIT FOR 2 us*/ 265 udelay(2); 266 267 l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( 268 (char *)l2dev_gmii_reg 269 + T1040_SWITCH_GMII_DEV_OFFSET); 270 271 /* Initialize Lynx PHY Wrappers */ 272 phy_addr = 0; 273 if (vsc9953_l2sw.port[i].enet_if == 274 PHY_INTERFACE_MODE_QSGMII) 275 phy_addr = (i + 0x4) & 0x1F; 276 else if (vsc9953_l2sw.port[i].enet_if == 277 PHY_INTERFACE_MODE_SGMII) 278 phy_addr = (i + 1) & 0x1F; 279 280 if (phy_addr) { 281 /* SGMII IF mode + AN enable */ 282 vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, 283 0x14, PHY_SGMII_IF_MODE_AN | 284 PHY_SGMII_IF_MODE_SGMII); 285 /* Dev ability according to SGMII specification */ 286 vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, 287 0x4, PHY_SGMII_DEV_ABILITY_SGMII); 288 /* Adjust link timer for SGMII 289 * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 290 */ 291 vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, 292 0x13, 0x0003); 293 vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, 294 0x12, 0x0d40); 295 /* Restart AN */ 296 vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, 297 0x0, PHY_SGMII_CR_DEF_VAL | 298 PHY_SGMII_CR_RESET_AN); 299 300 timeout = 50000; 301 while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], 302 phy_addr, 0x01) & 0x0020) && --timeout) 303 udelay(1); /* wait for AN to complete */ 304 if (timeout == 0) 305 debug("Timeout waiting for AN to complete\n"); 306 } 307 } 308 309 printf("VSC9953 L2 switch initialized\n"); 310 return; 311 } 312 313 #ifdef CONFIG_VSC9953_CMD 314 /* Enable/disable status of a VSC9953 port */ 315 static void vsc9953_port_status_set(int port_nr, u8 enabled) 316 { 317 u32 val; 318 struct vsc9953_qsys_reg *l2qsys_reg; 319 320 /* Administrative down */ 321 if (vsc9953_l2sw.port[port_nr].enabled == 0) 322 return; 323 324 l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + 325 VSC9953_QSYS_OFFSET); 326 327 val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]); 328 if (enabled == 1) 329 val |= (1 << 13); 330 else 331 val &= ~(1 << 13); 332 333 out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val); 334 } 335 336 /* Set all VSC9953 ports' status */ 337 static void vsc9953_port_all_status_set(u8 enabled) 338 { 339 int i; 340 341 for (i = 0; i < VSC9953_MAX_PORTS; i++) 342 vsc9953_port_status_set(i, enabled); 343 } 344 345 /* Start autonegotiation for a VSC9953 PHY */ 346 static void vsc9953_phy_autoneg(int port_nr) 347 { 348 if (!vsc9953_l2sw.port[port_nr].phydev) 349 return; 350 351 if (vsc9953_l2sw.port[port_nr].phydev->drv->startup( 352 vsc9953_l2sw.port[port_nr].phydev)) 353 printf("Failed to start PHY for port %d\n", port_nr); 354 } 355 356 /* Start autonegotiation for all VSC9953 PHYs */ 357 static void vsc9953_phy_all_autoneg(void) 358 { 359 int i; 360 361 for (i = 0; i < VSC9953_MAX_PORTS; i++) 362 vsc9953_phy_autoneg(i); 363 } 364 365 /* Print a VSC9953 port's configuration */ 366 static void vsc9953_port_config_show(int port) 367 { 368 int speed; 369 int duplex; 370 int link; 371 u8 enabled; 372 u32 val; 373 struct vsc9953_qsys_reg *l2qsys_reg; 374 375 l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + 376 VSC9953_QSYS_OFFSET); 377 378 val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]); 379 enabled = vsc9953_l2sw.port[port].enabled & 380 ((val & 0x00002000) >> 13); 381 382 /* internal ports (8 and 9) are fixed */ 383 if (VSC9953_INTERNAL_PORT_CHECK(port)) { 384 link = 1; 385 speed = SPEED_2500; 386 duplex = DUPLEX_FULL; 387 } else { 388 if (vsc9953_l2sw.port[port].phydev) { 389 link = vsc9953_l2sw.port[port].phydev->link; 390 speed = vsc9953_l2sw.port[port].phydev->speed; 391 duplex = vsc9953_l2sw.port[port].phydev->duplex; 392 } else { 393 link = -1; 394 speed = -1; 395 duplex = -1; 396 } 397 } 398 399 printf("%8d ", port); 400 printf("%8s ", enabled == 1 ? "enabled" : "disabled"); 401 printf("%8s ", link == 1 ? "up" : "down"); 402 403 switch (speed) { 404 case SPEED_10: 405 printf("%8d ", 10); 406 break; 407 case SPEED_100: 408 printf("%8d ", 100); 409 break; 410 case SPEED_1000: 411 printf("%8d ", 1000); 412 break; 413 case SPEED_2500: 414 printf("%8d ", 2500); 415 break; 416 case SPEED_10000: 417 printf("%8d ", 10000); 418 break; 419 default: 420 printf("%8s ", "-"); 421 } 422 423 printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); 424 } 425 426 /* Print VSC9953 ports' configuration */ 427 static void vsc9953_port_all_config_show(void) 428 { 429 int i; 430 431 for (i = 0; i < VSC9953_MAX_PORTS; i++) 432 vsc9953_port_config_show(i); 433 } 434 435 /* function to interpret commands starting with "ethsw " */ 436 static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 437 { 438 u8 enable; 439 u32 port; 440 441 if (argc < 4) 442 return -1; 443 444 if (strcmp(argv[1], "port")) 445 return -1; 446 447 if (!strcmp(argv[3], "show")) { 448 if (!strcmp(argv[2], "all")) { 449 vsc9953_phy_all_autoneg(); 450 printf("%8s %8s %8s %8s %8s\n", 451 "Port", "Status", "Link", "Speed", 452 "Duplex"); 453 vsc9953_port_all_config_show(); 454 return 0; 455 } else { 456 port = simple_strtoul(argv[2], NULL, 10); 457 if (!VSC9953_PORT_CHECK(port)) 458 return -1; 459 vsc9953_phy_autoneg(port); 460 printf("%8s %8s %8s %8s %8s\n", 461 "Port", "Status", "Link", "Speed", 462 "Duplex"); 463 vsc9953_port_config_show(port); 464 return 0; 465 } 466 } else if (!strcmp(argv[3], "enable")) { 467 enable = 1; 468 } else if (!strcmp(argv[3], "disable")) { 469 enable = 0; 470 } else { 471 return -1; 472 } 473 474 if (!strcmp(argv[2], "all")) { 475 vsc9953_port_all_status_set(enable); 476 return 0; 477 } else { 478 port = simple_strtoul(argv[2], NULL, 10); 479 if (!VSC9953_PORT_CHECK(port)) 480 return -1; 481 vsc9953_port_status_set(port, enable); 482 return 0; 483 } 484 485 return -1; 486 } 487 488 U_BOOT_CMD(ethsw, 5, 0, do_ethsw, 489 "vsc9953 l2 switch commands", 490 "port <port_nr> enable|disable\n" 491 " - enable/disable an l2 switch port\n" 492 " port_nr=0..9; use \"all\" for all ports\n" 493 "ethsw port <port_nr> show\n" 494 " - show an l2 switch port's configuration\n" 495 " port_nr=0..9; use \"all\" for all ports\n" 496 ); 497 #endif /* CONFIG_VSC9953_CMD */ 498