1 /* 2 * Copyright 2007, 2010 Freescale Semiconductor, Inc. 3 * 4 * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007 5 * 6 * Description: 7 * ULI 526x Ethernet port driver. 8 * Based on the Linux driver: drivers/net/tulip/uli526x.c 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <common.h> 14 #include <malloc.h> 15 #include <net.h> 16 #include <netdev.h> 17 #include <asm/io.h> 18 #include <pci.h> 19 #include <miiphy.h> 20 21 /* some kernel function compatible define */ 22 23 #undef DEBUG 24 25 /* Board/System/Debug information/definition */ 26 #define ULI_VENDOR_ID 0x10B9 27 #define ULI5261_DEVICE_ID 0x5261 28 #define ULI5263_DEVICE_ID 0x5263 29 /* ULi M5261 ID*/ 30 #define PCI_ULI5261_ID (ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID) 31 /* ULi M5263 ID*/ 32 #define PCI_ULI5263_ID (ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID) 33 34 #define ULI526X_IO_SIZE 0x100 35 #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ 36 #define RX_DESC_CNT PKTBUFSRX /* Allocated Rx descriptors */ 37 #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ 38 #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ 39 #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) 40 #define TX_BUF_ALLOC 0x300 41 #define RX_ALLOC_SIZE PKTSIZE 42 #define ULI526X_RESET 1 43 #define CR0_DEFAULT 0 44 #define CR6_DEFAULT 0x22200000 45 #define CR7_DEFAULT 0x180c1 46 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ 47 #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ 48 #define MAX_PACKET_SIZE 1514 49 #define ULI5261_MAX_MULTICAST 14 50 #define RX_COPY_SIZE 100 51 #define MAX_CHECK_PACKET 0x8000 52 53 #define ULI526X_10MHF 0 54 #define ULI526X_100MHF 1 55 #define ULI526X_10MFD 4 56 #define ULI526X_100MFD 5 57 #define ULI526X_AUTO 8 58 59 #define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ 60 #define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ 61 #define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ 62 #define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ 63 #define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ 64 #define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ 65 66 /* CR9 definition: SROM/MII */ 67 #define CR9_SROM_READ 0x4800 68 #define CR9_SRCS 0x1 69 #define CR9_SRCLK 0x2 70 #define CR9_CRDOUT 0x8 71 #define SROM_DATA_0 0x0 72 #define SROM_DATA_1 0x4 73 #define PHY_DATA_1 0x20000 74 #define PHY_DATA_0 0x00000 75 #define MDCLKH 0x10000 76 77 #define PHY_POWER_DOWN 0x800 78 79 #define SROM_V41_CODE 0x14 80 81 #define SROM_CLK_WRITE(data, ioaddr) do { \ 82 outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \ 83 udelay(5); \ 84 outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr); \ 85 udelay(5); \ 86 outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \ 87 udelay(5); \ 88 } while (0) 89 90 /* Structure/enum declaration */ 91 92 struct tx_desc { 93 u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ 94 char *tx_buf_ptr; /* Data for us */ 95 struct tx_desc *next_tx_desc; 96 }; 97 98 struct rx_desc { 99 u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ 100 char *rx_buf_ptr; /* Data for us */ 101 struct rx_desc *next_rx_desc; 102 }; 103 104 struct uli526x_board_info { 105 u32 chip_id; /* Chip vendor/Device ID */ 106 pci_dev_t pdev; 107 108 long ioaddr; /* I/O base address */ 109 u32 cr0_data; 110 u32 cr5_data; 111 u32 cr6_data; 112 u32 cr7_data; 113 u32 cr15_data; 114 115 /* pointer for memory physical address */ 116 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ 117 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ 118 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ 119 dma_addr_t first_tx_desc_dma; 120 dma_addr_t first_rx_desc_dma; 121 122 /* descriptor pointer */ 123 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ 124 unsigned char *buf_pool_start; /* Tx buffer pool align dword */ 125 unsigned char *desc_pool_ptr; /* descriptor pool memory */ 126 struct tx_desc *first_tx_desc; 127 struct tx_desc *tx_insert_ptr; 128 struct tx_desc *tx_remove_ptr; 129 struct rx_desc *first_rx_desc; 130 struct rx_desc *rx_ready_ptr; /* packet come pointer */ 131 unsigned long tx_packet_cnt; /* transmitted packet count */ 132 133 u16 PHY_reg4; /* Saved Phyxcer register 4 value */ 134 135 u8 media_mode; /* user specify media mode */ 136 u8 op_mode; /* real work dedia mode */ 137 u8 phy_addr; 138 139 /* NIC SROM data */ 140 unsigned char srom[128]; 141 }; 142 143 enum uli526x_offsets { 144 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, 145 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, 146 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, 147 DCR15 = 0x78 148 }; 149 150 enum uli526x_CR6_bits { 151 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, 152 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, 153 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 154 }; 155 156 /* Global variable declaration -- */ 157 158 static unsigned char uli526x_media_mode = ULI526X_AUTO; 159 160 static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20] 161 __attribute__ ((aligned(32))); 162 static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4]; 163 164 /* For module input parameter */ 165 static int mode = 8; 166 167 /* function declaration -- */ 168 static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length); 169 static const struct ethtool_ops netdev_ethtool_ops; 170 static u16 read_srom_word(long, int); 171 static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); 172 static void allocate_rx_buffer(struct uli526x_board_info *); 173 static void update_cr6(u32, unsigned long); 174 static u16 uli_phy_read(unsigned long, u8, u8, u32); 175 static u16 phy_readby_cr10(unsigned long, u8, u8); 176 static void uli_phy_write(unsigned long, u8, u8, u16, u32); 177 static void phy_writeby_cr10(unsigned long, u8, u8, u16); 178 static void phy_write_1bit(unsigned long, u32, u32); 179 static u16 phy_read_1bit(unsigned long, u32); 180 static int uli526x_rx_packet(struct eth_device *); 181 static void uli526x_free_tx_pkt(struct eth_device *, 182 struct uli526x_board_info *); 183 static void uli526x_reuse_buf(struct rx_desc *); 184 static void uli526x_init(struct eth_device *); 185 static void uli526x_set_phyxcer(struct uli526x_board_info *); 186 187 188 static int uli526x_init_one(struct eth_device *, bd_t *); 189 static void uli526x_disable(struct eth_device *); 190 static void set_mac_addr(struct eth_device *); 191 192 static struct pci_device_id uli526x_pci_tbl[] = { 193 { ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */ 194 { ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */ 195 {} 196 }; 197 198 /* ULI526X network board routine */ 199 200 /* 201 * Search ULI526X board, register it 202 */ 203 204 int uli526x_initialize(bd_t *bis) 205 { 206 pci_dev_t devno; 207 int card_number = 0; 208 struct eth_device *dev; 209 struct uli526x_board_info *db; /* board information structure */ 210 211 u32 iobase; 212 int idx = 0; 213 214 while (1) { 215 /* Find PCI device */ 216 devno = pci_find_devices(uli526x_pci_tbl, idx++); 217 if (devno < 0) 218 break; 219 220 pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); 221 iobase &= ~0xf; 222 223 dev = (struct eth_device *)malloc(sizeof *dev); 224 if (!dev) { 225 printf("uli526x: Can not allocate memory\n"); 226 break; 227 } 228 memset(dev, 0, sizeof(*dev)); 229 sprintf(dev->name, "uli526x#%d", card_number); 230 db = (struct uli526x_board_info *) 231 malloc(sizeof(struct uli526x_board_info)); 232 233 dev->priv = db; 234 db->pdev = devno; 235 dev->iobase = iobase; 236 237 dev->init = uli526x_init_one; 238 dev->halt = uli526x_disable; 239 dev->send = uli526x_start_xmit; 240 dev->recv = uli526x_rx_packet; 241 242 /* init db */ 243 db->ioaddr = dev->iobase; 244 /* get chip id */ 245 246 pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id); 247 #ifdef DEBUG 248 printf("uli526x: uli526x @0x%x\n", iobase); 249 printf("uli526x: chip_id%x\n", db->chip_id); 250 #endif 251 eth_register(dev); 252 card_number++; 253 pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20); 254 udelay(10 * 1000); 255 } 256 return card_number; 257 } 258 259 static int uli526x_init_one(struct eth_device *dev, bd_t *bis) 260 { 261 262 struct uli526x_board_info *db = dev->priv; 263 int i; 264 265 switch (mode) { 266 case ULI526X_10MHF: 267 case ULI526X_100MHF: 268 case ULI526X_10MFD: 269 case ULI526X_100MFD: 270 uli526x_media_mode = mode; 271 break; 272 default: 273 uli526x_media_mode = ULI526X_AUTO; 274 break; 275 } 276 277 /* Allocate Tx/Rx descriptor memory */ 278 db->desc_pool_ptr = (uchar *)&desc_pool_array[0]; 279 db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0]; 280 if (db->desc_pool_ptr == NULL) 281 return -1; 282 283 db->buf_pool_ptr = (uchar *)&buf_pool[0]; 284 db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0]; 285 if (db->buf_pool_ptr == NULL) 286 return -1; 287 288 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; 289 db->first_tx_desc_dma = db->desc_pool_dma_ptr; 290 291 db->buf_pool_start = db->buf_pool_ptr; 292 db->buf_pool_dma_start = db->buf_pool_dma_ptr; 293 294 #ifdef DEBUG 295 printf("%s(): db->ioaddr= 0x%x\n", 296 __FUNCTION__, db->ioaddr); 297 printf("%s(): media_mode= 0x%x\n", 298 __FUNCTION__, uli526x_media_mode); 299 printf("%s(): db->desc_pool_ptr= 0x%x\n", 300 __FUNCTION__, db->desc_pool_ptr); 301 printf("%s(): db->desc_pool_dma_ptr= 0x%x\n", 302 __FUNCTION__, db->desc_pool_dma_ptr); 303 printf("%s(): db->buf_pool_ptr= 0x%x\n", 304 __FUNCTION__, db->buf_pool_ptr); 305 printf("%s(): db->buf_pool_dma_ptr= 0x%x\n", 306 __FUNCTION__, db->buf_pool_dma_ptr); 307 #endif 308 309 /* read 64 word srom data */ 310 for (i = 0; i < 64; i++) 311 ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, 312 i)); 313 314 /* Set Node address */ 315 if (((db->srom[0] == 0xff) && (db->srom[1] == 0xff)) || 316 ((db->srom[0] == 0x00) && (db->srom[1] == 0x00))) 317 /* SROM absent, so write MAC address to ID Table */ 318 set_mac_addr(dev); 319 else { /*Exist SROM*/ 320 for (i = 0; i < 6; i++) 321 dev->enetaddr[i] = db->srom[20 + i]; 322 } 323 #ifdef DEBUG 324 for (i = 0; i < 6; i++) 325 printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]); 326 #endif 327 db->PHY_reg4 = 0x1e0; 328 329 /* system variable init */ 330 db->cr6_data = CR6_DEFAULT ; 331 db->cr6_data |= ULI526X_TXTH_256; 332 db->cr0_data = CR0_DEFAULT; 333 uli526x_init(dev); 334 return 0; 335 } 336 337 static void uli526x_disable(struct eth_device *dev) 338 { 339 #ifdef DEBUG 340 printf("uli526x_disable\n"); 341 #endif 342 struct uli526x_board_info *db = dev->priv; 343 344 if (!((inl(db->ioaddr + DCR12)) & 0x8)) { 345 /* Reset & stop ULI526X board */ 346 outl(ULI526X_RESET, db->ioaddr + DCR0); 347 udelay(5); 348 uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); 349 350 /* reset the board */ 351 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ 352 update_cr6(db->cr6_data, dev->iobase); 353 outl(0, dev->iobase + DCR7); /* Disable Interrupt */ 354 outl(inl(dev->iobase + DCR5), dev->iobase + DCR5); 355 } 356 } 357 358 /* Initialize ULI526X board 359 * Reset ULI526X board 360 * Initialize TX/Rx descriptor chain structure 361 * Send the set-up frame 362 * Enable Tx/Rx machine 363 */ 364 365 static void uli526x_init(struct eth_device *dev) 366 { 367 368 struct uli526x_board_info *db = dev->priv; 369 u8 phy_tmp; 370 u16 phy_value; 371 u16 phy_reg_reset; 372 373 /* Reset M526x MAC controller */ 374 outl(ULI526X_RESET, db->ioaddr + DCR0); /* RESET MAC */ 375 udelay(100); 376 outl(db->cr0_data, db->ioaddr + DCR0); 377 udelay(5); 378 379 /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ 380 db->phy_addr = 1; 381 db->tx_packet_cnt = 0; 382 for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) { 383 /* peer add */ 384 phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); 385 if (phy_value != 0xffff && phy_value != 0) { 386 db->phy_addr = phy_tmp; 387 break; 388 } 389 } 390 391 #ifdef DEBUG 392 printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr); 393 printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr); 394 #endif 395 if (phy_tmp == 32) 396 printf("Can not find the phy address!!!"); 397 398 /* Parser SROM and media mode */ 399 db->media_mode = uli526x_media_mode; 400 401 if (!(inl(db->ioaddr + DCR12) & 0x8)) { 402 /* Phyxcer capability setting */ 403 phy_reg_reset = uli_phy_read(db->ioaddr, 404 db->phy_addr, 0, db->chip_id); 405 phy_reg_reset = (phy_reg_reset | 0x8000); 406 uli_phy_write(db->ioaddr, db->phy_addr, 0, 407 phy_reg_reset, db->chip_id); 408 udelay(500); 409 410 /* Process Phyxcer Media Mode */ 411 uli526x_set_phyxcer(db); 412 } 413 /* Media Mode Process */ 414 if (!(db->media_mode & ULI526X_AUTO)) 415 db->op_mode = db->media_mode; /* Force Mode */ 416 417 /* Initialize Transmit/Receive decriptor and CR3/4 */ 418 uli526x_descriptor_init(db, db->ioaddr); 419 420 /* Init CR6 to program M526X operation */ 421 update_cr6(db->cr6_data, db->ioaddr); 422 423 /* Init CR7, interrupt active bit */ 424 db->cr7_data = CR7_DEFAULT; 425 outl(db->cr7_data, db->ioaddr + DCR7); 426 427 /* Init CR15, Tx jabber and Rx watchdog timer */ 428 outl(db->cr15_data, db->ioaddr + DCR15); 429 430 /* Enable ULI526X Tx/Rx function */ 431 db->cr6_data |= CR6_RXSC | CR6_TXSC; 432 update_cr6(db->cr6_data, db->ioaddr); 433 while (!(inl(db->ioaddr + DCR12) & 0x8)) 434 udelay(10); 435 } 436 437 /* 438 * Hardware start transmission. 439 * Send a packet to media from the upper layer. 440 */ 441 442 static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length) 443 { 444 struct uli526x_board_info *db = dev->priv; 445 struct tx_desc *txptr; 446 unsigned int len = length; 447 /* Too large packet check */ 448 if (len > MAX_PACKET_SIZE) { 449 printf(": big packet = %d\n", len); 450 return 0; 451 } 452 453 /* No Tx resource check, it never happen nromally */ 454 if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { 455 printf("No Tx resource %ld\n", db->tx_packet_cnt); 456 return 0; 457 } 458 459 /* Disable NIC interrupt */ 460 outl(0, dev->iobase + DCR7); 461 462 /* transmit this packet */ 463 txptr = db->tx_insert_ptr; 464 memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length); 465 txptr->tdes1 = cpu_to_le32(0xe1000000 | length); 466 467 /* Point to next transmit free descriptor */ 468 db->tx_insert_ptr = txptr->next_tx_desc; 469 470 /* Transmit Packet Process */ 471 if ((db->tx_packet_cnt < TX_DESC_CNT)) { 472 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 473 db->tx_packet_cnt++; /* Ready to send */ 474 outl(0x1, dev->iobase + DCR1); /* Issue Tx polling */ 475 } 476 477 /* Got ULI526X status */ 478 db->cr5_data = inl(db->ioaddr + DCR5); 479 outl(db->cr5_data, db->ioaddr + DCR5); 480 481 #ifdef TX_DEBUG 482 printf("%s(): length = 0x%x\n", __FUNCTION__, length); 483 printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data); 484 #endif 485 486 outl(db->cr7_data, dev->iobase + DCR7); 487 uli526x_free_tx_pkt(dev, db); 488 489 return length; 490 } 491 492 /* 493 * Free TX resource after TX complete 494 */ 495 496 static void uli526x_free_tx_pkt(struct eth_device *dev, 497 struct uli526x_board_info *db) 498 { 499 struct tx_desc *txptr; 500 u32 tdes0; 501 502 txptr = db->tx_remove_ptr; 503 while (db->tx_packet_cnt) { 504 tdes0 = le32_to_cpu(txptr->tdes0); 505 /* printf(DRV_NAME ": tdes0=%x\n", tdes0); */ 506 if (tdes0 & 0x80000000) 507 break; 508 509 /* A packet sent completed */ 510 db->tx_packet_cnt--; 511 512 if (tdes0 != 0x7fffffff) { 513 #ifdef TX_DEBUG 514 printf("%s()tdes0=%x\n", __FUNCTION__, tdes0); 515 #endif 516 if (tdes0 & TDES0_ERR_MASK) { 517 if (tdes0 & 0x0002) { /* UnderRun */ 518 if (!(db->cr6_data & CR6_SFT)) { 519 db->cr6_data = db->cr6_data | 520 CR6_SFT; 521 update_cr6(db->cr6_data, 522 db->ioaddr); 523 } 524 } 525 } 526 } 527 528 txptr = txptr->next_tx_desc; 529 }/* End of while */ 530 531 /* Update TX remove pointer to next */ 532 db->tx_remove_ptr = txptr; 533 } 534 535 536 /* 537 * Receive the come packet and pass to upper layer 538 */ 539 540 static int uli526x_rx_packet(struct eth_device *dev) 541 { 542 struct uli526x_board_info *db = dev->priv; 543 struct rx_desc *rxptr; 544 int rxlen = 0; 545 u32 rdes0; 546 547 rxptr = db->rx_ready_ptr; 548 549 rdes0 = le32_to_cpu(rxptr->rdes0); 550 #ifdef RX_DEBUG 551 printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0); 552 #endif 553 if (!(rdes0 & 0x80000000)) { /* packet owner check */ 554 if ((rdes0 & 0x300) != 0x300) { 555 /* A packet without First/Last flag */ 556 /* reuse this buf */ 557 printf("A packet without First/Last flag"); 558 uli526x_reuse_buf(rxptr); 559 } else { 560 /* A packet with First/Last flag */ 561 rxlen = ((rdes0 >> 16) & 0x3fff) - 4; 562 #ifdef RX_DEBUG 563 printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen); 564 #endif 565 /* error summary bit check */ 566 if (rdes0 & 0x8000) { 567 /* This is a error packet */ 568 printf("Error: rdes0: %x\n", rdes0); 569 } 570 571 if (!(rdes0 & 0x8000) || 572 ((db->cr6_data & CR6_PM) && (rxlen > 6))) { 573 574 #ifdef RX_DEBUG 575 printf("%s(): rx_skb_ptr =%x\n", 576 __FUNCTION__, rxptr->rx_buf_ptr); 577 printf("%s(): rxlen =%x\n", 578 __FUNCTION__, rxlen); 579 580 printf("%s(): buf addr =%x\n", 581 __FUNCTION__, rxptr->rx_buf_ptr); 582 printf("%s(): rxlen =%x\n", 583 __FUNCTION__, rxlen); 584 int i; 585 for (i = 0; i < 0x20; i++) 586 printf("%s(): data[%x] =%x\n", 587 __FUNCTION__, i, rxptr->rx_buf_ptr[i]); 588 #endif 589 590 NetReceive((uchar *)rxptr->rx_buf_ptr, rxlen); 591 uli526x_reuse_buf(rxptr); 592 593 } else { 594 /* Reuse SKB buffer when the packet is error */ 595 printf("Reuse buffer, rdes0"); 596 uli526x_reuse_buf(rxptr); 597 } 598 } 599 600 rxptr = rxptr->next_rx_desc; 601 } 602 603 db->rx_ready_ptr = rxptr; 604 return rxlen; 605 } 606 607 /* 608 * Reuse the RX buffer 609 */ 610 611 static void uli526x_reuse_buf(struct rx_desc *rxptr) 612 { 613 614 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) 615 rxptr->rdes0 = cpu_to_le32(0x80000000); 616 else 617 printf("Buffer reuse method error"); 618 } 619 /* 620 * Initialize transmit/Receive descriptor 621 * Using Chain structure, and allocate Tx/Rx buffer 622 */ 623 624 static void uli526x_descriptor_init(struct uli526x_board_info *db, 625 unsigned long ioaddr) 626 { 627 struct tx_desc *tmp_tx; 628 struct rx_desc *tmp_rx; 629 unsigned char *tmp_buf; 630 dma_addr_t tmp_tx_dma, tmp_rx_dma; 631 dma_addr_t tmp_buf_dma; 632 int i; 633 /* tx descriptor start pointer */ 634 db->tx_insert_ptr = db->first_tx_desc; 635 db->tx_remove_ptr = db->first_tx_desc; 636 637 outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ 638 639 /* rx descriptor start pointer */ 640 db->first_rx_desc = (void *)db->first_tx_desc + 641 sizeof(struct tx_desc) * TX_DESC_CNT; 642 db->first_rx_desc_dma = db->first_tx_desc_dma + 643 sizeof(struct tx_desc) * TX_DESC_CNT; 644 db->rx_ready_ptr = db->first_rx_desc; 645 outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ 646 #ifdef DEBUG 647 printf("%s(): db->first_tx_desc= 0x%x\n", 648 __FUNCTION__, db->first_tx_desc); 649 printf("%s(): db->first_rx_desc_dma= 0x%x\n", 650 __FUNCTION__, db->first_rx_desc_dma); 651 #endif 652 /* Init Transmit chain */ 653 tmp_buf = db->buf_pool_start; 654 tmp_buf_dma = db->buf_pool_dma_start; 655 tmp_tx_dma = db->first_tx_desc_dma; 656 for (tmp_tx = db->first_tx_desc, i = 0; 657 i < TX_DESC_CNT; i++, tmp_tx++) { 658 tmp_tx->tx_buf_ptr = (char *)tmp_buf; 659 tmp_tx->tdes0 = cpu_to_le32(0); 660 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ 661 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); 662 tmp_tx_dma += sizeof(struct tx_desc); 663 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); 664 tmp_tx->next_tx_desc = tmp_tx + 1; 665 tmp_buf = tmp_buf + TX_BUF_ALLOC; 666 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; 667 } 668 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); 669 tmp_tx->next_tx_desc = db->first_tx_desc; 670 671 /* Init Receive descriptor chain */ 672 tmp_rx_dma = db->first_rx_desc_dma; 673 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; 674 i++, tmp_rx++) { 675 tmp_rx->rdes0 = cpu_to_le32(0); 676 tmp_rx->rdes1 = cpu_to_le32(0x01000600); 677 tmp_rx_dma += sizeof(struct rx_desc); 678 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); 679 tmp_rx->next_rx_desc = tmp_rx + 1; 680 } 681 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); 682 tmp_rx->next_rx_desc = db->first_rx_desc; 683 684 /* pre-allocate Rx buffer */ 685 allocate_rx_buffer(db); 686 } 687 688 /* 689 * Update CR6 value 690 * Firstly stop ULI526X, then written value and start 691 */ 692 693 static void update_cr6(u32 cr6_data, unsigned long ioaddr) 694 { 695 696 outl(cr6_data, ioaddr + DCR6); 697 udelay(5); 698 } 699 700 /* 701 * Allocate rx buffer, 702 */ 703 704 static void allocate_rx_buffer(struct uli526x_board_info *db) 705 { 706 int index; 707 struct rx_desc *rxptr; 708 rxptr = db->first_rx_desc; 709 u32 addr; 710 711 for (index = 0; index < RX_DESC_CNT; index++) { 712 addr = (u32)NetRxPackets[index]; 713 addr += (16 - (addr & 15)); 714 rxptr->rx_buf_ptr = (char *) addr; 715 rxptr->rdes2 = cpu_to_le32(addr); 716 rxptr->rdes0 = cpu_to_le32(0x80000000); 717 #ifdef DEBUG 718 printf("%s(): Number 0x%x:\n", __FUNCTION__, index); 719 printf("%s(): addr 0x%x:\n", __FUNCTION__, addr); 720 printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr); 721 printf("%s(): rxptr buf address = 0x%x\n", \ 722 __FUNCTION__, rxptr->rx_buf_ptr); 723 printf("%s(): rdes2 = 0x%x\n", __FUNCTION__, rxptr->rdes2); 724 #endif 725 rxptr = rxptr->next_rx_desc; 726 } 727 } 728 729 /* 730 * Read one word data from the serial ROM 731 */ 732 733 static u16 read_srom_word(long ioaddr, int offset) 734 { 735 int i; 736 u16 srom_data = 0; 737 long cr9_ioaddr = ioaddr + DCR9; 738 739 outl(CR9_SROM_READ, cr9_ioaddr); 740 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); 741 742 /* Send the Read Command 110b */ 743 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); 744 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); 745 SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); 746 747 /* Send the offset */ 748 for (i = 5; i >= 0; i--) { 749 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; 750 SROM_CLK_WRITE(srom_data, cr9_ioaddr); 751 } 752 753 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); 754 755 for (i = 16; i > 0; i--) { 756 outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); 757 udelay(5); 758 srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) 759 ? 1 : 0); 760 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); 761 udelay(5); 762 } 763 764 outl(CR9_SROM_READ, cr9_ioaddr); 765 return srom_data; 766 } 767 768 /* 769 * Set 10/100 phyxcer capability 770 * AUTO mode : phyxcer register4 is NIC capability 771 * Force mode: phyxcer register4 is the force media 772 */ 773 774 static void uli526x_set_phyxcer(struct uli526x_board_info *db) 775 { 776 u16 phy_reg; 777 778 /* Phyxcer capability setting */ 779 phy_reg = uli_phy_read(db->ioaddr, 780 db->phy_addr, 4, db->chip_id) & ~0x01e0; 781 782 if (db->media_mode & ULI526X_AUTO) { 783 /* AUTO Mode */ 784 phy_reg |= db->PHY_reg4; 785 } else { 786 /* Force Mode */ 787 switch (db->media_mode) { 788 case ULI526X_10MHF: phy_reg |= 0x20; break; 789 case ULI526X_10MFD: phy_reg |= 0x40; break; 790 case ULI526X_100MHF: phy_reg |= 0x80; break; 791 case ULI526X_100MFD: phy_reg |= 0x100; break; 792 } 793 794 } 795 796 /* Write new capability to Phyxcer Reg4 */ 797 if (!(phy_reg & 0x01e0)) { 798 phy_reg |= db->PHY_reg4; 799 db->media_mode |= ULI526X_AUTO; 800 } 801 uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); 802 803 /* Restart Auto-Negotiation */ 804 uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); 805 udelay(50); 806 } 807 808 /* 809 * Write a word to Phy register 810 */ 811 812 static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset, 813 u16 phy_data, u32 chip_id) 814 { 815 u16 i; 816 unsigned long ioaddr; 817 818 if (chip_id == PCI_ULI5263_ID) { 819 phy_writeby_cr10(iobase, phy_addr, offset, phy_data); 820 return; 821 } 822 /* M5261/M5263 Chip */ 823 ioaddr = iobase + DCR9; 824 825 /* Send 33 synchronization clock to Phy controller */ 826 for (i = 0; i < 35; i++) 827 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 828 829 /* Send start command(01) to Phy */ 830 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); 831 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 832 833 /* Send write command(01) to Phy */ 834 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); 835 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 836 837 /* Send Phy address */ 838 for (i = 0x10; i > 0; i = i >> 1) 839 phy_write_1bit(ioaddr, phy_addr & i ? 840 PHY_DATA_1 : PHY_DATA_0, chip_id); 841 842 /* Send register address */ 843 for (i = 0x10; i > 0; i = i >> 1) 844 phy_write_1bit(ioaddr, offset & i ? 845 PHY_DATA_1 : PHY_DATA_0, chip_id); 846 847 /* written trasnition */ 848 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 849 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); 850 851 /* Write a word data to PHY controller */ 852 for (i = 0x8000; i > 0; i >>= 1) 853 phy_write_1bit(ioaddr, phy_data & i ? 854 PHY_DATA_1 : PHY_DATA_0, chip_id); 855 } 856 857 /* 858 * Read a word data from phy register 859 */ 860 861 static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset, 862 u32 chip_id) 863 { 864 int i; 865 u16 phy_data; 866 unsigned long ioaddr; 867 868 if (chip_id == PCI_ULI5263_ID) 869 return phy_readby_cr10(iobase, phy_addr, offset); 870 /* M5261/M5263 Chip */ 871 ioaddr = iobase + DCR9; 872 873 /* Send 33 synchronization clock to Phy controller */ 874 for (i = 0; i < 35; i++) 875 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 876 877 /* Send start command(01) to Phy */ 878 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); 879 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 880 881 /* Send read command(10) to Phy */ 882 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); 883 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); 884 885 /* Send Phy address */ 886 for (i = 0x10; i > 0; i = i >> 1) 887 phy_write_1bit(ioaddr, phy_addr & i ? 888 PHY_DATA_1 : PHY_DATA_0, chip_id); 889 890 /* Send register address */ 891 for (i = 0x10; i > 0; i = i >> 1) 892 phy_write_1bit(ioaddr, offset & i ? 893 PHY_DATA_1 : PHY_DATA_0, chip_id); 894 895 /* Skip transition state */ 896 phy_read_1bit(ioaddr, chip_id); 897 898 /* read 16bit data */ 899 for (phy_data = 0, i = 0; i < 16; i++) { 900 phy_data <<= 1; 901 phy_data |= phy_read_1bit(ioaddr, chip_id); 902 } 903 904 return phy_data; 905 } 906 907 static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) 908 { 909 unsigned long ioaddr, cr10_value; 910 911 ioaddr = iobase + DCR10; 912 cr10_value = phy_addr; 913 cr10_value = (cr10_value<<5) + offset; 914 cr10_value = (cr10_value<<16) + 0x08000000; 915 outl(cr10_value, ioaddr); 916 udelay(1); 917 while (1) { 918 cr10_value = inl(ioaddr); 919 if (cr10_value & 0x10000000) 920 break; 921 } 922 return (cr10_value&0x0ffff); 923 } 924 925 static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, 926 u8 offset, u16 phy_data) 927 { 928 unsigned long ioaddr, cr10_value; 929 930 ioaddr = iobase + DCR10; 931 cr10_value = phy_addr; 932 cr10_value = (cr10_value<<5) + offset; 933 cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; 934 outl(cr10_value, ioaddr); 935 udelay(1); 936 } 937 /* 938 * Write one bit data to Phy Controller 939 */ 940 941 static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) 942 { 943 outl(phy_data , ioaddr); /* MII Clock Low */ 944 udelay(1); 945 outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ 946 udelay(1); 947 outl(phy_data , ioaddr); /* MII Clock Low */ 948 udelay(1); 949 } 950 951 /* 952 * Read one bit phy data from PHY controller 953 */ 954 955 static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) 956 { 957 u16 phy_data; 958 959 outl(0x50000 , ioaddr); 960 udelay(1); 961 phy_data = (inl(ioaddr) >> 19) & 0x1; 962 outl(0x40000 , ioaddr); 963 udelay(1); 964 965 return phy_data; 966 } 967 968 /* 969 * Set MAC address to ID Table 970 */ 971 972 static void set_mac_addr(struct eth_device *dev) 973 { 974 int i; 975 u16 addr; 976 struct uli526x_board_info *db = dev->priv; 977 outl(0x10000, db->ioaddr + DCR0); /* Diagnosis mode */ 978 /* Reset dianostic pointer port */ 979 outl(0x1c0, db->ioaddr + DCR13); 980 outl(0, db->ioaddr + DCR14); /* Clear reset port */ 981 outl(0x10, db->ioaddr + DCR14); /* Reset ID Table pointer */ 982 outl(0, db->ioaddr + DCR14); /* Clear reset port */ 983 outl(0, db->ioaddr + DCR13); /* Clear CR13 */ 984 /* Select ID Table access port */ 985 outl(0x1b0, db->ioaddr + DCR13); 986 /* Read MAC address from CR14 */ 987 for (i = 0; i < 3; i++) { 988 addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8); 989 outl(addr, db->ioaddr + DCR14); 990 } 991 /* write end */ 992 outl(0, db->ioaddr + DCR13); /* Clear CR13 */ 993 outl(0, db->ioaddr + DCR0); /* Clear CR0 */ 994 udelay(10); 995 return; 996 } 997