1 /* 2 * sunxi_emac.c -- Allwinner A10 ethernet driver 3 * 4 * (C) Copyright 2012, Stefan Roese <sr@denx.de> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <linux/err.h> 11 #include <malloc.h> 12 #include <miiphy.h> 13 #include <net.h> 14 #include <asm/io.h> 15 #include <asm/arch/clock.h> 16 #include <asm/arch/gpio.h> 17 18 /* EMAC register */ 19 struct emac_regs { 20 u32 ctl; /* 0x00 */ 21 u32 tx_mode; /* 0x04 */ 22 u32 tx_flow; /* 0x08 */ 23 u32 tx_ctl0; /* 0x0c */ 24 u32 tx_ctl1; /* 0x10 */ 25 u32 tx_ins; /* 0x14 */ 26 u32 tx_pl0; /* 0x18 */ 27 u32 tx_pl1; /* 0x1c */ 28 u32 tx_sta; /* 0x20 */ 29 u32 tx_io_data; /* 0x24 */ 30 u32 tx_io_data1;/* 0x28 */ 31 u32 tx_tsvl0; /* 0x2c */ 32 u32 tx_tsvh0; /* 0x30 */ 33 u32 tx_tsvl1; /* 0x34 */ 34 u32 tx_tsvh1; /* 0x38 */ 35 u32 rx_ctl; /* 0x3c */ 36 u32 rx_hash0; /* 0x40 */ 37 u32 rx_hash1; /* 0x44 */ 38 u32 rx_sta; /* 0x48 */ 39 u32 rx_io_data; /* 0x4c */ 40 u32 rx_fbc; /* 0x50 */ 41 u32 int_ctl; /* 0x54 */ 42 u32 int_sta; /* 0x58 */ 43 u32 mac_ctl0; /* 0x5c */ 44 u32 mac_ctl1; /* 0x60 */ 45 u32 mac_ipgt; /* 0x64 */ 46 u32 mac_ipgr; /* 0x68 */ 47 u32 mac_clrt; /* 0x6c */ 48 u32 mac_maxf; /* 0x70 */ 49 u32 mac_supp; /* 0x74 */ 50 u32 mac_test; /* 0x78 */ 51 u32 mac_mcfg; /* 0x7c */ 52 u32 mac_mcmd; /* 0x80 */ 53 u32 mac_madr; /* 0x84 */ 54 u32 mac_mwtd; /* 0x88 */ 55 u32 mac_mrdd; /* 0x8c */ 56 u32 mac_mind; /* 0x90 */ 57 u32 mac_ssrr; /* 0x94 */ 58 u32 mac_a0; /* 0x98 */ 59 u32 mac_a1; /* 0x9c */ 60 }; 61 62 /* SRAMC register */ 63 struct sunxi_sramc_regs { 64 u32 ctrl0; 65 u32 ctrl1; 66 }; 67 68 /* 0: Disable 1: Aborted frame enable(default) */ 69 #define EMAC_TX_AB_M (0x1 << 0) 70 /* 0: CPU 1: DMA(default) */ 71 #define EMAC_TX_TM (0x1 << 1) 72 73 #define EMAC_TX_SETUP (0) 74 75 /* 0: DRQ asserted 1: DRQ automatically(default) */ 76 #define EMAC_RX_DRQ_MODE (0x1 << 1) 77 /* 0: CPU 1: DMA(default) */ 78 #define EMAC_RX_TM (0x1 << 2) 79 /* 0: Normal(default) 1: Pass all Frames */ 80 #define EMAC_RX_PA (0x1 << 4) 81 /* 0: Normal(default) 1: Pass Control Frames */ 82 #define EMAC_RX_PCF (0x1 << 5) 83 /* 0: Normal(default) 1: Pass Frames with CRC Error */ 84 #define EMAC_RX_PCRCE (0x1 << 6) 85 /* 0: Normal(default) 1: Pass Frames with Length Error */ 86 #define EMAC_RX_PLE (0x1 << 7) 87 /* 0: Normal 1: Pass Frames length out of range(default) */ 88 #define EMAC_RX_POR (0x1 << 8) 89 /* 0: Not accept 1: Accept unicast Packets(default) */ 90 #define EMAC_RX_UCAD (0x1 << 16) 91 /* 0: Normal(default) 1: DA Filtering */ 92 #define EMAC_RX_DAF (0x1 << 17) 93 /* 0: Not accept 1: Accept multicast Packets(default) */ 94 #define EMAC_RX_MCO (0x1 << 20) 95 /* 0: Disable(default) 1: Enable Hash filter */ 96 #define EMAC_RX_MHF (0x1 << 21) 97 /* 0: Not accept 1: Accept Broadcast Packets(default) */ 98 #define EMAC_RX_BCO (0x1 << 22) 99 /* 0: Disable(default) 1: Enable SA Filtering */ 100 #define EMAC_RX_SAF (0x1 << 24) 101 /* 0: Normal(default) 1: Inverse Filtering */ 102 #define EMAC_RX_SAIF (0x1 << 25) 103 104 #define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ 105 EMAC_RX_MCO | EMAC_RX_BCO) 106 107 /* 0: Disable 1: Enable Receive Flow Control(default) */ 108 #define EMAC_MAC_CTL0_RFC (0x1 << 2) 109 /* 0: Disable 1: Enable Transmit Flow Control(default) */ 110 #define EMAC_MAC_CTL0_TFC (0x1 << 3) 111 112 #define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) 113 114 /* 0: Disable 1: Enable MAC Frame Length Checking(default) */ 115 #define EMAC_MAC_CTL1_FLC (0x1 << 1) 116 /* 0: Disable(default) 1: Enable Huge Frame */ 117 #define EMAC_MAC_CTL1_HF (0x1 << 2) 118 /* 0: Disable(default) 1: Enable MAC Delayed CRC */ 119 #define EMAC_MAC_CTL1_DCRC (0x1 << 3) 120 /* 0: Disable 1: Enable MAC CRC(default) */ 121 #define EMAC_MAC_CTL1_CRC (0x1 << 4) 122 /* 0: Disable 1: Enable MAC PAD Short frames(default) */ 123 #define EMAC_MAC_CTL1_PC (0x1 << 5) 124 /* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ 125 #define EMAC_MAC_CTL1_VC (0x1 << 6) 126 /* 0: Disable(default) 1: Enable MAC auto detect Short frames */ 127 #define EMAC_MAC_CTL1_ADP (0x1 << 7) 128 /* 0: Disable(default) 1: Enable */ 129 #define EMAC_MAC_CTL1_PRE (0x1 << 8) 130 /* 0: Disable(default) 1: Enable */ 131 #define EMAC_MAC_CTL1_LPE (0x1 << 9) 132 /* 0: Disable(default) 1: Enable no back off */ 133 #define EMAC_MAC_CTL1_NB (0x1 << 12) 134 /* 0: Disable(default) 1: Enable */ 135 #define EMAC_MAC_CTL1_BNB (0x1 << 13) 136 /* 0: Disable(default) 1: Enable */ 137 #define EMAC_MAC_CTL1_ED (0x1 << 14) 138 139 #define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ 140 EMAC_MAC_CTL1_PC) 141 142 #define EMAC_MAC_IPGT 0x15 143 144 #define EMAC_MAC_NBTB_IPG1 0xc 145 #define EMAC_MAC_NBTB_IPG2 0x12 146 147 #define EMAC_MAC_CW 0x37 148 #define EMAC_MAC_RM 0xf 149 150 #define EMAC_MAC_MFL 0x0600 151 152 /* Receive status */ 153 #define EMAC_CRCERR (0x1 << 4) 154 #define EMAC_LENERR (0x3 << 5) 155 156 #define DMA_CPU_TRRESHOLD 2000 157 158 struct emac_eth_dev { 159 u32 speed; 160 u32 duplex; 161 u32 phy_configured; 162 int link_printed; 163 }; 164 165 struct emac_rxhdr { 166 s16 rx_len; 167 u16 rx_status; 168 }; 169 170 static void emac_inblk_32bit(void *reg, void *data, int count) 171 { 172 int cnt = (count + 3) >> 2; 173 174 if (cnt) { 175 u32 *buf = data; 176 177 do { 178 u32 x = readl(reg); 179 *buf++ = x; 180 } while (--cnt); 181 } 182 } 183 184 static void emac_outblk_32bit(void *reg, void *data, int count) 185 { 186 int cnt = (count + 3) >> 2; 187 188 if (cnt) { 189 const u32 *buf = data; 190 191 do { 192 writel(*buf++, reg); 193 } while (--cnt); 194 } 195 } 196 197 /* Read a word from phyxcer */ 198 static int emac_phy_read(const char *devname, unsigned char addr, 199 unsigned char reg, unsigned short *value) 200 { 201 struct eth_device *dev = eth_get_dev_by_name(devname); 202 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 203 204 /* issue the phy address and reg */ 205 writel(addr << 8 | reg, ®s->mac_madr); 206 207 /* pull up the phy io line */ 208 writel(0x1, ®s->mac_mcmd); 209 210 /* Wait read complete */ 211 mdelay(1); 212 213 /* push down the phy io line */ 214 writel(0x0, ®s->mac_mcmd); 215 216 /* and write data */ 217 *value = readl(®s->mac_mrdd); 218 219 return 0; 220 } 221 222 /* Write a word to phyxcer */ 223 static int emac_phy_write(const char *devname, unsigned char addr, 224 unsigned char reg, unsigned short value) 225 { 226 struct eth_device *dev = eth_get_dev_by_name(devname); 227 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 228 229 /* issue the phy address and reg */ 230 writel(addr << 8 | reg, ®s->mac_madr); 231 232 /* pull up the phy io line */ 233 writel(0x1, ®s->mac_mcmd); 234 235 /* Wait write complete */ 236 mdelay(1); 237 238 /* push down the phy io line */ 239 writel(0x0, ®s->mac_mcmd); 240 241 /* and write data */ 242 writel(value, ®s->mac_mwtd); 243 244 return 0; 245 } 246 247 static void emac_setup(struct eth_device *dev) 248 { 249 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 250 u32 reg_val; 251 u16 phy_val; 252 u32 duplex_flag; 253 254 /* Set up TX */ 255 writel(EMAC_TX_SETUP, ®s->tx_mode); 256 257 /* Set up RX */ 258 writel(EMAC_RX_SETUP, ®s->rx_ctl); 259 260 /* Set MAC */ 261 /* Set MAC CTL0 */ 262 writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); 263 264 /* Set MAC CTL1 */ 265 emac_phy_read(dev->name, 1, 0, &phy_val); 266 debug("PHY SETUP, reg 0 value: %x\n", phy_val); 267 duplex_flag = !!(phy_val & (1 << 8)); 268 269 reg_val = 0; 270 if (duplex_flag) 271 reg_val = (0x1 << 0); 272 writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); 273 274 /* Set up IPGT */ 275 writel(EMAC_MAC_IPGT, ®s->mac_ipgt); 276 277 /* Set up IPGR */ 278 writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); 279 280 /* Set up Collison window */ 281 writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); 282 283 /* Set up Max Frame Length */ 284 writel(EMAC_MAC_MFL, ®s->mac_maxf); 285 } 286 287 static void emac_reset(struct eth_device *dev) 288 { 289 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 290 291 debug("resetting device\n"); 292 293 /* RESET device */ 294 writel(0, ®s->ctl); 295 udelay(200); 296 297 writel(1, ®s->ctl); 298 udelay(200); 299 } 300 301 static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd) 302 { 303 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 304 struct emac_eth_dev *priv = dev->priv; 305 u16 phy_reg; 306 307 /* Init EMAC */ 308 309 /* Flush RX FIFO */ 310 setbits_le32(®s->rx_ctl, 0x8); 311 udelay(1); 312 313 /* Init MAC */ 314 315 /* Soft reset MAC */ 316 clrbits_le32(®s->mac_ctl0, 0x1 << 15); 317 318 /* Clear RX counter */ 319 writel(0x0, ®s->rx_fbc); 320 udelay(1); 321 322 /* Set up EMAC */ 323 emac_setup(dev); 324 325 writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | 326 dev->enetaddr[2], ®s->mac_a1); 327 writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | 328 dev->enetaddr[5], ®s->mac_a0); 329 330 mdelay(1); 331 332 emac_reset(dev); 333 334 /* PHY POWER UP */ 335 emac_phy_read(dev->name, 1, 0, &phy_reg); 336 emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11))); 337 mdelay(1); 338 339 emac_phy_read(dev->name, 1, 0, &phy_reg); 340 341 priv->speed = miiphy_speed(dev->name, 0); 342 priv->duplex = miiphy_duplex(dev->name, 0); 343 344 /* Print link status only once */ 345 if (!priv->link_printed) { 346 printf("ENET Speed is %d Mbps - %s duplex connection\n", 347 priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); 348 priv->link_printed = 1; 349 } 350 351 /* Set EMAC SPEED depend on PHY */ 352 clrsetbits_le32(®s->mac_supp, 1 << 8, 353 ((phy_reg & (0x1 << 13)) >> 13) << 8); 354 355 /* Set duplex depend on phy */ 356 clrsetbits_le32(®s->mac_ctl1, 1 << 0, 357 ((phy_reg & (0x1 << 8)) >> 8) << 0); 358 359 /* Enable RX/TX */ 360 setbits_le32(®s->ctl, 0x7); 361 362 return 0; 363 } 364 365 static void sunxi_emac_eth_halt(struct eth_device *dev) 366 { 367 /* Nothing to do here */ 368 } 369 370 static int sunxi_emac_eth_recv(struct eth_device *dev) 371 { 372 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 373 struct emac_rxhdr rxhdr; 374 u32 rxcount; 375 u32 reg_val; 376 int rx_len; 377 int rx_status; 378 int good_packet; 379 380 /* Check packet ready or not */ 381 382 /* Race warning: The first packet might arrive with 383 * the interrupts disabled, but the second will fix 384 */ 385 rxcount = readl(®s->rx_fbc); 386 if (!rxcount) { 387 /* Had one stuck? */ 388 rxcount = readl(®s->rx_fbc); 389 if (!rxcount) 390 return 0; 391 } 392 393 reg_val = readl(®s->rx_io_data); 394 if (reg_val != 0x0143414d) { 395 /* Disable RX */ 396 clrbits_le32(®s->ctl, 0x1 << 2); 397 398 /* Flush RX FIFO */ 399 setbits_le32(®s->rx_ctl, 0x1 << 3); 400 while (readl(®s->rx_ctl) & (0x1 << 3)) 401 ; 402 403 /* Enable RX */ 404 setbits_le32(®s->ctl, 0x1 << 2); 405 406 return 0; 407 } 408 409 /* A packet ready now 410 * Get status/length 411 */ 412 good_packet = 1; 413 414 emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); 415 416 rx_len = rxhdr.rx_len; 417 rx_status = rxhdr.rx_status; 418 419 /* Packet Status check */ 420 if (rx_len < 0x40) { 421 good_packet = 0; 422 debug("RX: Bad Packet (runt)\n"); 423 } 424 425 /* rx_status is identical to RSR register. */ 426 if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { 427 good_packet = 0; 428 if (rx_status & EMAC_CRCERR) 429 printf("crc error\n"); 430 if (rx_status & EMAC_LENERR) 431 printf("length error\n"); 432 } 433 434 /* Move data from EMAC */ 435 if (good_packet) { 436 if (rx_len > DMA_CPU_TRRESHOLD) { 437 printf("Received packet is too big (len=%d)\n", rx_len); 438 } else { 439 emac_inblk_32bit((void *)®s->rx_io_data, 440 NetRxPackets[0], rx_len); 441 442 /* Pass to upper layer */ 443 NetReceive(NetRxPackets[0], rx_len); 444 return rx_len; 445 } 446 } 447 448 return 0; 449 } 450 451 static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len) 452 { 453 struct emac_regs *regs = (struct emac_regs *)dev->iobase; 454 455 /* Select channel 0 */ 456 writel(0, ®s->tx_ins); 457 458 /* Write packet */ 459 emac_outblk_32bit((void *)®s->tx_io_data, packet, len); 460 461 /* Set TX len */ 462 writel(len, ®s->tx_pl0); 463 464 /* Start translate from fifo to phy */ 465 setbits_le32(®s->tx_ctl0, 1); 466 467 return 0; 468 } 469 470 int sunxi_emac_initialize(void) 471 { 472 struct sunxi_ccm_reg *const ccm = 473 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; 474 struct sunxi_sramc_regs *sram = 475 (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; 476 struct emac_regs *regs = 477 (struct emac_regs *)SUNXI_EMAC_BASE; 478 struct eth_device *dev; 479 struct emac_eth_dev *priv; 480 int pin; 481 482 dev = malloc(sizeof(*dev)); 483 if (dev == NULL) 484 return -ENOMEM; 485 486 priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev)); 487 if (!priv) { 488 free(dev); 489 return -ENOMEM; 490 } 491 492 memset(dev, 0, sizeof(*dev)); 493 memset(priv, 0, sizeof(struct emac_eth_dev)); 494 495 /* Map SRAM to EMAC */ 496 setbits_le32(&sram->ctrl1, 0x5 << 2); 497 498 /* Configure pin mux settings for MII Ethernet */ 499 for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) 500 sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC); 501 502 /* Set up clock gating */ 503 setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC); 504 505 /* Set MII clock */ 506 clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); 507 508 dev->iobase = (int)regs; 509 dev->priv = priv; 510 dev->init = sunxi_emac_eth_init; 511 dev->halt = sunxi_emac_eth_halt; 512 dev->send = sunxi_emac_eth_send; 513 dev->recv = sunxi_emac_eth_recv; 514 strcpy(dev->name, "emac"); 515 516 eth_register(dev); 517 518 miiphy_register(dev->name, emac_phy_read, emac_phy_write); 519 520 return 0; 521 } 522