xref: /openbmc/u-boot/drivers/net/sh_eth.c (revision cdaa633f)
1 /*
2  * sh_eth.c - Driver for Renesas ethernet controller.
3  *
4  * Copyright (C) 2008, 2011 Renesas Solutions Corp.
5  * Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu
6  * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
7  * Copyright (C) 2013, 2014 Renesas Electronics Corporation
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <config.h>
13 #include <common.h>
14 #include <malloc.h>
15 #include <net.h>
16 #include <netdev.h>
17 #include <miiphy.h>
18 #include <asm/errno.h>
19 #include <asm/io.h>
20 
21 #include "sh_eth.h"
22 
23 #ifndef CONFIG_SH_ETHER_USE_PORT
24 # error "Please define CONFIG_SH_ETHER_USE_PORT"
25 #endif
26 #ifndef CONFIG_SH_ETHER_PHY_ADDR
27 # error "Please define CONFIG_SH_ETHER_PHY_ADDR"
28 #endif
29 
30 #if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
31 #define flush_cache_wback(addr, len)    \
32 		flush_dcache_range((u32)addr, (u32)(addr + len - 1))
33 #else
34 #define flush_cache_wback(...)
35 #endif
36 
37 #if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
38 #define invalidate_cache(addr, len)		\
39 	{	\
40 		u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE;	\
41 		u32 start, end;	\
42 		\
43 		start = (u32)addr;	\
44 		end = start + len;	\
45 		start &= ~(line_size - 1);	\
46 		end = ((end + line_size - 1) & ~(line_size - 1));	\
47 		\
48 		invalidate_dcache_range(start, end);	\
49 	}
50 #else
51 #define invalidate_cache(...)
52 #endif
53 
54 #define TIMEOUT_CNT 1000
55 
56 int sh_eth_send(struct eth_device *dev, void *packet, int len)
57 {
58 	struct sh_eth_dev *eth = dev->priv;
59 	int port = eth->port, ret = 0, timeout;
60 	struct sh_eth_info *port_info = &eth->port_info[port];
61 
62 	if (!packet || len > 0xffff) {
63 		printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
64 		ret = -EINVAL;
65 		goto err;
66 	}
67 
68 	/* packet must be a 4 byte boundary */
69 	if ((int)packet & 3) {
70 		printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n"
71 				, __func__);
72 		ret = -EFAULT;
73 		goto err;
74 	}
75 
76 	/* Update tx descriptor */
77 	flush_cache_wback(packet, len);
78 	port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
79 	port_info->tx_desc_cur->td1 = len << 16;
80 	/* Must preserve the end of descriptor list indication */
81 	if (port_info->tx_desc_cur->td0 & TD_TDLE)
82 		port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
83 	else
84 		port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
85 
86 	flush_cache_wback(port_info->tx_desc_cur, sizeof(struct tx_desc_s));
87 
88 	/* Restart the transmitter if disabled */
89 	if (!(sh_eth_read(eth, EDTRR) & EDTRR_TRNS))
90 		sh_eth_write(eth, EDTRR_TRNS, EDTRR);
91 
92 	/* Wait until packet is transmitted */
93 	timeout = TIMEOUT_CNT;
94 	do {
95 		invalidate_cache(port_info->tx_desc_cur,
96 				 sizeof(struct tx_desc_s));
97 		udelay(100);
98 	} while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
99 
100 	if (timeout < 0) {
101 		printf(SHETHER_NAME ": transmit timeout\n");
102 		ret = -ETIMEDOUT;
103 		goto err;
104 	}
105 
106 	port_info->tx_desc_cur++;
107 	if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
108 		port_info->tx_desc_cur = port_info->tx_desc_base;
109 
110 err:
111 	return ret;
112 }
113 
114 int sh_eth_recv(struct eth_device *dev)
115 {
116 	struct sh_eth_dev *eth = dev->priv;
117 	int port = eth->port, len = 0;
118 	struct sh_eth_info *port_info = &eth->port_info[port];
119 	uchar *packet;
120 
121 	/* Check if the rx descriptor is ready */
122 	invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
123 	if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
124 		/* Check for errors */
125 		if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
126 			len = port_info->rx_desc_cur->rd1 & 0xffff;
127 			packet = (uchar *)
128 				ADDR_TO_P2(port_info->rx_desc_cur->rd2);
129 			invalidate_cache(packet, len);
130 			net_process_received_packet(packet, len);
131 		}
132 
133 		/* Make current descriptor available again */
134 		if (port_info->rx_desc_cur->rd0 & RD_RDLE)
135 			port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
136 		else
137 			port_info->rx_desc_cur->rd0 = RD_RACT;
138 
139 		flush_cache_wback(port_info->rx_desc_cur,
140 				  sizeof(struct rx_desc_s));
141 
142 		/* Point to the next descriptor */
143 		port_info->rx_desc_cur++;
144 		if (port_info->rx_desc_cur >=
145 		    port_info->rx_desc_base + NUM_RX_DESC)
146 			port_info->rx_desc_cur = port_info->rx_desc_base;
147 	}
148 
149 	/* Restart the receiver if disabled */
150 	if (!(sh_eth_read(eth, EDRRR) & EDRRR_R))
151 		sh_eth_write(eth, EDRRR_R, EDRRR);
152 
153 	return len;
154 }
155 
156 static int sh_eth_reset(struct sh_eth_dev *eth)
157 {
158 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
159 	int ret = 0, i;
160 
161 	/* Start e-dmac transmitter and receiver */
162 	sh_eth_write(eth, EDSR_ENALL, EDSR);
163 
164 	/* Perform a software reset and wait for it to complete */
165 	sh_eth_write(eth, EDMR_SRST, EDMR);
166 	for (i = 0; i < TIMEOUT_CNT; i++) {
167 		if (!(sh_eth_read(eth, EDMR) & EDMR_SRST))
168 			break;
169 		udelay(1000);
170 	}
171 
172 	if (i == TIMEOUT_CNT) {
173 		printf(SHETHER_NAME  ": Software reset timeout\n");
174 		ret = -EIO;
175 	}
176 
177 	return ret;
178 #else
179 	sh_eth_write(eth, sh_eth_read(eth, EDMR) | EDMR_SRST, EDMR);
180 	udelay(3000);
181 	sh_eth_write(eth, sh_eth_read(eth, EDMR) & ~EDMR_SRST, EDMR);
182 
183 	return 0;
184 #endif
185 }
186 
187 static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
188 {
189 	int port = eth->port, i, ret = 0;
190 	u32 alloc_desc_size = NUM_TX_DESC * sizeof(struct tx_desc_s);
191 	struct sh_eth_info *port_info = &eth->port_info[port];
192 	struct tx_desc_s *cur_tx_desc;
193 
194 	/*
195 	 * Allocate rx descriptors. They must be aligned to size of struct
196 	 * tx_desc_s.
197 	 */
198 	port_info->tx_desc_alloc =
199 		memalign(sizeof(struct tx_desc_s), alloc_desc_size);
200 	if (!port_info->tx_desc_alloc) {
201 		printf(SHETHER_NAME ": memalign failed\n");
202 		ret = -ENOMEM;
203 		goto err;
204 	}
205 
206 	flush_cache_wback((u32)port_info->tx_desc_alloc, alloc_desc_size);
207 
208 	/* Make sure we use a P2 address (non-cacheable) */
209 	port_info->tx_desc_base =
210 		(struct tx_desc_s *)ADDR_TO_P2((u32)port_info->tx_desc_alloc);
211 	port_info->tx_desc_cur = port_info->tx_desc_base;
212 
213 	/* Initialize all descriptors */
214 	for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
215 	     cur_tx_desc++, i++) {
216 		cur_tx_desc->td0 = 0x00;
217 		cur_tx_desc->td1 = 0x00;
218 		cur_tx_desc->td2 = 0x00;
219 	}
220 
221 	/* Mark the end of the descriptors */
222 	cur_tx_desc--;
223 	cur_tx_desc->td0 |= TD_TDLE;
224 
225 	/* Point the controller to the tx descriptor list. Must use physical
226 	   addresses */
227 	sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR);
228 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
229 	sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR);
230 	sh_eth_write(eth, ADDR_TO_PHY(cur_tx_desc), TDFXR);
231 	sh_eth_write(eth, 0x01, TDFFR);/* Last discriptor bit */
232 #endif
233 
234 err:
235 	return ret;
236 }
237 
238 static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
239 {
240 	int port = eth->port, i , ret = 0;
241 	u32 alloc_desc_size = NUM_RX_DESC * sizeof(struct rx_desc_s);
242 	struct sh_eth_info *port_info = &eth->port_info[port];
243 	struct rx_desc_s *cur_rx_desc;
244 	u8 *rx_buf;
245 
246 	/*
247 	 * Allocate rx descriptors. They must be aligned to size of struct
248 	 * rx_desc_s.
249 	 */
250 	port_info->rx_desc_alloc =
251 		memalign(sizeof(struct rx_desc_s), alloc_desc_size);
252 	if (!port_info->rx_desc_alloc) {
253 		printf(SHETHER_NAME ": memalign failed\n");
254 		ret = -ENOMEM;
255 		goto err;
256 	}
257 
258 	flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size);
259 
260 	/* Make sure we use a P2 address (non-cacheable) */
261 	port_info->rx_desc_base =
262 		(struct rx_desc_s *)ADDR_TO_P2((u32)port_info->rx_desc_alloc);
263 
264 	port_info->rx_desc_cur = port_info->rx_desc_base;
265 
266 	/*
267 	 * Allocate rx data buffers. They must be RX_BUF_ALIGNE_SIZE bytes
268 	 * aligned and in P2 area.
269 	 */
270 	port_info->rx_buf_alloc =
271 		memalign(RX_BUF_ALIGNE_SIZE, NUM_RX_DESC * MAX_BUF_SIZE);
272 	if (!port_info->rx_buf_alloc) {
273 		printf(SHETHER_NAME ": alloc failed\n");
274 		ret = -ENOMEM;
275 		goto err_buf_alloc;
276 	}
277 
278 	port_info->rx_buf_base = (u8 *)ADDR_TO_P2((u32)port_info->rx_buf_alloc);
279 
280 	/* Initialize all descriptors */
281 	for (cur_rx_desc = port_info->rx_desc_base,
282 	     rx_buf = port_info->rx_buf_base, i = 0;
283 	     i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
284 		cur_rx_desc->rd0 = RD_RACT;
285 		cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
286 		cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf);
287 	}
288 
289 	/* Mark the end of the descriptors */
290 	cur_rx_desc--;
291 	cur_rx_desc->rd0 |= RD_RDLE;
292 
293 	/* Point the controller to the rx descriptor list */
294 	sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
295 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
296 	sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR);
297 	sh_eth_write(eth, ADDR_TO_PHY(cur_rx_desc), RDFXR);
298 	sh_eth_write(eth, RDFFR_RDLF, RDFFR);
299 #endif
300 
301 	return ret;
302 
303 err_buf_alloc:
304 	free(port_info->rx_desc_alloc);
305 	port_info->rx_desc_alloc = NULL;
306 
307 err:
308 	return ret;
309 }
310 
311 static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
312 {
313 	int port = eth->port;
314 	struct sh_eth_info *port_info = &eth->port_info[port];
315 
316 	if (port_info->tx_desc_alloc) {
317 		free(port_info->tx_desc_alloc);
318 		port_info->tx_desc_alloc = NULL;
319 	}
320 }
321 
322 static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
323 {
324 	int port = eth->port;
325 	struct sh_eth_info *port_info = &eth->port_info[port];
326 
327 	if (port_info->rx_desc_alloc) {
328 		free(port_info->rx_desc_alloc);
329 		port_info->rx_desc_alloc = NULL;
330 	}
331 
332 	if (port_info->rx_buf_alloc) {
333 		free(port_info->rx_buf_alloc);
334 		port_info->rx_buf_alloc = NULL;
335 	}
336 }
337 
338 static int sh_eth_desc_init(struct sh_eth_dev *eth)
339 {
340 	int ret = 0;
341 
342 	ret = sh_eth_tx_desc_init(eth);
343 	if (ret)
344 		goto err_tx_init;
345 
346 	ret = sh_eth_rx_desc_init(eth);
347 	if (ret)
348 		goto err_rx_init;
349 
350 	return ret;
351 err_rx_init:
352 	sh_eth_tx_desc_free(eth);
353 
354 err_tx_init:
355 	return ret;
356 }
357 
358 static int sh_eth_phy_config(struct sh_eth_dev *eth)
359 {
360 	int port = eth->port, ret = 0;
361 	struct sh_eth_info *port_info = &eth->port_info[port];
362 	struct eth_device *dev = port_info->dev;
363 	struct phy_device *phydev;
364 
365 	phydev = phy_connect(
366 			miiphy_get_dev_by_name(dev->name),
367 			port_info->phy_addr, dev, CONFIG_SH_ETHER_PHY_MODE);
368 	port_info->phydev = phydev;
369 	phy_config(phydev);
370 
371 	return ret;
372 }
373 
374 static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
375 {
376 	int port = eth->port, ret = 0;
377 	u32 val;
378 	struct sh_eth_info *port_info = &eth->port_info[port];
379 	struct eth_device *dev = port_info->dev;
380 	struct phy_device *phy;
381 
382 	/* Configure e-dmac registers */
383 	sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) |
384 			(EMDR_DESC | EDMR_EL), EDMR);
385 
386 	sh_eth_write(eth, 0, EESIPR);
387 	sh_eth_write(eth, 0, TRSCER);
388 	sh_eth_write(eth, 0, TFTR);
389 	sh_eth_write(eth, (FIFO_SIZE_T | FIFO_SIZE_R), FDR);
390 	sh_eth_write(eth, RMCR_RST, RMCR);
391 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
392 	sh_eth_write(eth, 0, RPADIR);
393 #endif
394 	sh_eth_write(eth, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR);
395 
396 	/* Configure e-mac registers */
397 	sh_eth_write(eth, 0, ECSIPR);
398 
399 	/* Set Mac address */
400 	val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
401 	    dev->enetaddr[2] << 8 | dev->enetaddr[3];
402 	sh_eth_write(eth, val, MAHR);
403 
404 	val = dev->enetaddr[4] << 8 | dev->enetaddr[5];
405 	sh_eth_write(eth, val, MALR);
406 
407 	sh_eth_write(eth, RFLR_RFL_MIN, RFLR);
408 #if defined(SH_ETH_TYPE_GETHER)
409 	sh_eth_write(eth, 0, PIPR);
410 #endif
411 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
412 	sh_eth_write(eth, APR_AP, APR);
413 	sh_eth_write(eth, MPR_MP, MPR);
414 	sh_eth_write(eth, TPAUSER_TPAUSE, TPAUSER);
415 #endif
416 
417 #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
418 	sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
419 #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
420 	defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
421 	sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR);
422 #endif
423 	/* Configure phy */
424 	ret = sh_eth_phy_config(eth);
425 	if (ret) {
426 		printf(SHETHER_NAME ": phy config timeout\n");
427 		goto err_phy_cfg;
428 	}
429 	phy = port_info->phydev;
430 	ret = phy_startup(phy);
431 	if (ret) {
432 		printf(SHETHER_NAME ": phy startup failure\n");
433 		return ret;
434 	}
435 
436 	val = 0;
437 
438 	/* Set the transfer speed */
439 	if (phy->speed == 100) {
440 		printf(SHETHER_NAME ": 100Base/");
441 #if defined(SH_ETH_TYPE_GETHER)
442 		sh_eth_write(eth, GECMR_100B, GECMR);
443 #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
444 		sh_eth_write(eth, 1, RTRATE);
445 #elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
446 		defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
447 		defined(CONFIG_R8A7794)
448 		val = ECMR_RTM;
449 #endif
450 	} else if (phy->speed == 10) {
451 		printf(SHETHER_NAME ": 10Base/");
452 #if defined(SH_ETH_TYPE_GETHER)
453 		sh_eth_write(eth, GECMR_10B, GECMR);
454 #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
455 		sh_eth_write(eth, 0, RTRATE);
456 #endif
457 	}
458 #if defined(SH_ETH_TYPE_GETHER)
459 	else if (phy->speed == 1000) {
460 		printf(SHETHER_NAME ": 1000Base/");
461 		sh_eth_write(eth, GECMR_1000B, GECMR);
462 	}
463 #endif
464 
465 	/* Check if full duplex mode is supported by the phy */
466 	if (phy->duplex) {
467 		printf("Full\n");
468 		sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM),
469 			     ECMR);
470 	} else {
471 		printf("Half\n");
472 		sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR);
473 	}
474 
475 	return ret;
476 
477 err_phy_cfg:
478 	return ret;
479 }
480 
481 static void sh_eth_start(struct sh_eth_dev *eth)
482 {
483 	/*
484 	 * Enable the e-dmac receiver only. The transmitter will be enabled when
485 	 * we have something to transmit
486 	 */
487 	sh_eth_write(eth, EDRRR_R, EDRRR);
488 }
489 
490 static void sh_eth_stop(struct sh_eth_dev *eth)
491 {
492 	sh_eth_write(eth, ~EDRRR_R, EDRRR);
493 }
494 
495 int sh_eth_init(struct eth_device *dev, bd_t *bd)
496 {
497 	int ret = 0;
498 	struct sh_eth_dev *eth = dev->priv;
499 
500 	ret = sh_eth_reset(eth);
501 	if (ret)
502 		goto err;
503 
504 	ret = sh_eth_desc_init(eth);
505 	if (ret)
506 		goto err;
507 
508 	ret = sh_eth_config(eth, bd);
509 	if (ret)
510 		goto err_config;
511 
512 	sh_eth_start(eth);
513 
514 	return ret;
515 
516 err_config:
517 	sh_eth_tx_desc_free(eth);
518 	sh_eth_rx_desc_free(eth);
519 
520 err:
521 	return ret;
522 }
523 
524 void sh_eth_halt(struct eth_device *dev)
525 {
526 	struct sh_eth_dev *eth = dev->priv;
527 	sh_eth_stop(eth);
528 }
529 
530 int sh_eth_initialize(bd_t *bd)
531 {
532 	int ret = 0;
533 	struct sh_eth_dev *eth = NULL;
534 	struct eth_device *dev = NULL;
535 
536 	eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
537 	if (!eth) {
538 		printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
539 		ret = -ENOMEM;
540 		goto err;
541 	}
542 
543 	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
544 	if (!dev) {
545 		printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
546 		ret = -ENOMEM;
547 		goto err;
548 	}
549 	memset(dev, 0, sizeof(struct eth_device));
550 	memset(eth, 0, sizeof(struct sh_eth_dev));
551 
552 	eth->port = CONFIG_SH_ETHER_USE_PORT;
553 	eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
554 
555 	dev->priv = (void *)eth;
556 	dev->iobase = 0;
557 	dev->init = sh_eth_init;
558 	dev->halt = sh_eth_halt;
559 	dev->send = sh_eth_send;
560 	dev->recv = sh_eth_recv;
561 	eth->port_info[eth->port].dev = dev;
562 
563 	strcpy(dev->name, SHETHER_NAME);
564 
565 	/* Register Device to EtherNet subsystem  */
566 	eth_register(dev);
567 
568 	bb_miiphy_buses[0].priv = eth;
569 	miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write);
570 
571 	if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr))
572 		puts("Please set MAC address\n");
573 
574 	return ret;
575 
576 err:
577 	if (dev)
578 		free(dev);
579 
580 	if (eth)
581 		free(eth);
582 
583 	printf(SHETHER_NAME ": Failed\n");
584 	return ret;
585 }
586 
587 /******* for bb_miiphy *******/
588 static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
589 {
590 	return 0;
591 }
592 
593 static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
594 {
595 	struct sh_eth_dev *eth = bus->priv;
596 
597 	sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MMD, PIR);
598 
599 	return 0;
600 }
601 
602 static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
603 {
604 	struct sh_eth_dev *eth = bus->priv;
605 
606 	sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MMD, PIR);
607 
608 	return 0;
609 }
610 
611 static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
612 {
613 	struct sh_eth_dev *eth = bus->priv;
614 
615 	if (v)
616 		sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDO, PIR);
617 	else
618 		sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDO, PIR);
619 
620 	return 0;
621 }
622 
623 static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
624 {
625 	struct sh_eth_dev *eth = bus->priv;
626 
627 	*v = (sh_eth_read(eth, PIR) & PIR_MDI) >> 3;
628 
629 	return 0;
630 }
631 
632 static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
633 {
634 	struct sh_eth_dev *eth = bus->priv;
635 
636 	if (v)
637 		sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDC, PIR);
638 	else
639 		sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDC, PIR);
640 
641 	return 0;
642 }
643 
644 static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
645 {
646 	udelay(10);
647 
648 	return 0;
649 }
650 
651 struct bb_miiphy_bus bb_miiphy_buses[] = {
652 	{
653 		.name		= "sh_eth",
654 		.init		= sh_eth_bb_init,
655 		.mdio_active	= sh_eth_bb_mdio_active,
656 		.mdio_tristate	= sh_eth_bb_mdio_tristate,
657 		.set_mdio	= sh_eth_bb_set_mdio,
658 		.get_mdio	= sh_eth_bb_get_mdio,
659 		.set_mdc	= sh_eth_bb_set_mdc,
660 		.delay		= sh_eth_bb_delay,
661 	}
662 };
663 int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
664