xref: /openbmc/u-boot/drivers/net/rtl8169.c (revision ee7bb5be)
1 /*
2  * rtl8169.c : U-Boot driver for the RealTek RTL8169
3  *
4  * Masami Komiya (mkomiya@sonare.it)
5  *
6  * Most part is taken from r8169.c of etherboot
7  *
8  */
9 
10 /**************************************************************************
11 *    r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
12 *    Written 2003 by Timothy Legge <tlegge@rogers.com>
13 *
14  * SPDX-License-Identifier:	GPL-2.0+
15 *
16 *    Portions of this code based on:
17 *	r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver
18 *		for Linux kernel 2.4.x.
19 *
20 *    Written 2002 ShuChen <shuchen@realtek.com.tw>
21 *	  See Linux Driver for full information
22 *
23 *    Linux Driver Version 1.27a, 10.02.2002
24 *
25 *    Thanks to:
26 *	Jean Chen of RealTek Semiconductor Corp. for
27 *	providing the evaluation NIC used to develop
28 *	this driver.  RealTek's support for Etherboot
29 *	is appreciated.
30 *
31 *    REVISION HISTORY:
32 *    ================
33 *
34 *    v1.0	11-26-2003	timlegge	Initial port of Linux driver
35 *    v1.5	01-17-2004	timlegge	Initial driver output cleanup
36 *
37 *    Indent Options: indent -kr -i8
38 ***************************************************************************/
39 /*
40  * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
41  * Modified to use le32_to_cpu and cpu_to_le32 properly
42  */
43 #include <common.h>
44 #include <dm.h>
45 #include <errno.h>
46 #include <malloc.h>
47 #include <memalign.h>
48 #include <net.h>
49 #ifndef CONFIG_DM_ETH
50 #include <netdev.h>
51 #endif
52 #include <asm/io.h>
53 #include <pci.h>
54 
55 #undef DEBUG_RTL8169
56 #undef DEBUG_RTL8169_TX
57 #undef DEBUG_RTL8169_RX
58 
59 #define drv_version "v1.5"
60 #define drv_date "01-17-2004"
61 
62 static unsigned long ioaddr;
63 
64 /* Condensed operations for readability. */
65 #define currticks()	get_timer(0)
66 
67 /* media options */
68 #define MAX_UNITS 8
69 static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
70 
71 /* MAC address length*/
72 #define MAC_ADDR_LEN	6
73 
74 /* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/
75 #define MAX_ETH_FRAME_SIZE	1536
76 
77 #define TX_FIFO_THRESH 256	/* In bytes */
78 
79 #define RX_FIFO_THRESH	7	/* 7 means NO threshold, Rx buffer level before first PCI xfer.	 */
80 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
81 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
82 #define EarlyTxThld	0x3F	/* 0x3F means NO early transmit */
83 #define RxPacketMaxSize 0x0800	/* Maximum size supported is 16K-1 */
84 #define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
85 
86 #define NUM_TX_DESC	1	/* Number of Tx descriptor registers */
87 #ifdef CONFIG_SYS_RX_ETH_BUFFER
88   #define NUM_RX_DESC	CONFIG_SYS_RX_ETH_BUFFER
89 #else
90   #define NUM_RX_DESC	4	/* Number of Rx descriptor registers */
91 #endif
92 #define RX_BUF_SIZE	1536	/* Rx Buffer size */
93 #define RX_BUF_LEN	8192
94 
95 #define RTL_MIN_IO_SIZE 0x80
96 #define TX_TIMEOUT  (6*HZ)
97 
98 /* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */
99 #define RTL_W8(reg, val8)	writeb((val8), ioaddr + (reg))
100 #define RTL_W16(reg, val16)	writew((val16), ioaddr + (reg))
101 #define RTL_W32(reg, val32)	writel((val32), ioaddr + (reg))
102 #define RTL_R8(reg)		readb(ioaddr + (reg))
103 #define RTL_R16(reg)		readw(ioaddr + (reg))
104 #define RTL_R32(reg)		readl(ioaddr + (reg))
105 
106 #define ETH_FRAME_LEN	MAX_ETH_FRAME_SIZE
107 #define ETH_ALEN	MAC_ADDR_LEN
108 #define ETH_ZLEN	60
109 
110 #define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \
111 	(pci_addr_t)(unsigned long)a)
112 #define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \
113 	(phys_addr_t)a)
114 
115 enum RTL8169_registers {
116 	MAC0 = 0,		/* Ethernet hardware address. */
117 	MAR0 = 8,		/* Multicast filter. */
118 	TxDescStartAddrLow = 0x20,
119 	TxDescStartAddrHigh = 0x24,
120 	TxHDescStartAddrLow = 0x28,
121 	TxHDescStartAddrHigh = 0x2c,
122 	FLASH = 0x30,
123 	ERSR = 0x36,
124 	ChipCmd = 0x37,
125 	TxPoll = 0x38,
126 	IntrMask = 0x3C,
127 	IntrStatus = 0x3E,
128 	TxConfig = 0x40,
129 	RxConfig = 0x44,
130 	RxMissed = 0x4C,
131 	Cfg9346 = 0x50,
132 	Config0 = 0x51,
133 	Config1 = 0x52,
134 	Config2 = 0x53,
135 	Config3 = 0x54,
136 	Config4 = 0x55,
137 	Config5 = 0x56,
138 	MultiIntr = 0x5C,
139 	PHYAR = 0x60,
140 	TBICSR = 0x64,
141 	TBI_ANAR = 0x68,
142 	TBI_LPAR = 0x6A,
143 	PHYstatus = 0x6C,
144 	RxMaxSize = 0xDA,
145 	CPlusCmd = 0xE0,
146 	RxDescStartAddrLow = 0xE4,
147 	RxDescStartAddrHigh = 0xE8,
148 	EarlyTxThres = 0xEC,
149 	FuncEvent = 0xF0,
150 	FuncEventMask = 0xF4,
151 	FuncPresetState = 0xF8,
152 	FuncForceEvent = 0xFC,
153 };
154 
155 enum RTL8169_register_content {
156 	/*InterruptStatusBits */
157 	SYSErr = 0x8000,
158 	PCSTimeout = 0x4000,
159 	SWInt = 0x0100,
160 	TxDescUnavail = 0x80,
161 	RxFIFOOver = 0x40,
162 	RxUnderrun = 0x20,
163 	RxOverflow = 0x10,
164 	TxErr = 0x08,
165 	TxOK = 0x04,
166 	RxErr = 0x02,
167 	RxOK = 0x01,
168 
169 	/*RxStatusDesc */
170 	RxRES = 0x00200000,
171 	RxCRC = 0x00080000,
172 	RxRUNT = 0x00100000,
173 	RxRWT = 0x00400000,
174 
175 	/*ChipCmdBits */
176 	CmdReset = 0x10,
177 	CmdRxEnb = 0x08,
178 	CmdTxEnb = 0x04,
179 	RxBufEmpty = 0x01,
180 
181 	/*Cfg9346Bits */
182 	Cfg9346_Lock = 0x00,
183 	Cfg9346_Unlock = 0xC0,
184 
185 	/*rx_mode_bits */
186 	AcceptErr = 0x20,
187 	AcceptRunt = 0x10,
188 	AcceptBroadcast = 0x08,
189 	AcceptMulticast = 0x04,
190 	AcceptMyPhys = 0x02,
191 	AcceptAllPhys = 0x01,
192 
193 	/*RxConfigBits */
194 	RxCfgFIFOShift = 13,
195 	RxCfgDMAShift = 8,
196 
197 	/*TxConfigBits */
198 	TxInterFrameGapShift = 24,
199 	TxDMAShift = 8,		/* DMA burst value (0-7) is shift this many bits */
200 
201 	/*rtl8169_PHYstatus */
202 	TBI_Enable = 0x80,
203 	TxFlowCtrl = 0x40,
204 	RxFlowCtrl = 0x20,
205 	_1000bpsF = 0x10,
206 	_100bps = 0x08,
207 	_10bps = 0x04,
208 	LinkStatus = 0x02,
209 	FullDup = 0x01,
210 
211 	/*GIGABIT_PHY_registers */
212 	PHY_CTRL_REG = 0,
213 	PHY_STAT_REG = 1,
214 	PHY_AUTO_NEGO_REG = 4,
215 	PHY_1000_CTRL_REG = 9,
216 
217 	/*GIGABIT_PHY_REG_BIT */
218 	PHY_Restart_Auto_Nego = 0x0200,
219 	PHY_Enable_Auto_Nego = 0x1000,
220 
221 	/* PHY_STAT_REG = 1; */
222 	PHY_Auto_Nego_Comp = 0x0020,
223 
224 	/* PHY_AUTO_NEGO_REG = 4; */
225 	PHY_Cap_10_Half = 0x0020,
226 	PHY_Cap_10_Full = 0x0040,
227 	PHY_Cap_100_Half = 0x0080,
228 	PHY_Cap_100_Full = 0x0100,
229 
230 	/* PHY_1000_CTRL_REG = 9; */
231 	PHY_Cap_1000_Full = 0x0200,
232 
233 	PHY_Cap_Null = 0x0,
234 
235 	/*_MediaType*/
236 	_10_Half = 0x01,
237 	_10_Full = 0x02,
238 	_100_Half = 0x04,
239 	_100_Full = 0x08,
240 	_1000_Full = 0x10,
241 
242 	/*_TBICSRBit*/
243 	TBILinkOK = 0x02000000,
244 };
245 
246 static struct {
247 	const char *name;
248 	u8 version;		/* depend on RTL8169 docs */
249 	u32 RxConfigMask;	/* should clear the bits supported by this chip */
250 } rtl_chip_info[] = {
251 	{"RTL-8169", 0x00, 0xff7e1880,},
252 	{"RTL-8169", 0x04, 0xff7e1880,},
253 	{"RTL-8169", 0x00, 0xff7e1880,},
254 	{"RTL-8169s/8110s",	0x02, 0xff7e1880,},
255 	{"RTL-8169s/8110s",	0x04, 0xff7e1880,},
256 	{"RTL-8169sb/8110sb",	0x10, 0xff7e1880,},
257 	{"RTL-8169sc/8110sc",	0x18, 0xff7e1880,},
258 	{"RTL-8168b/8111sb",	0x30, 0xff7e1880,},
259 	{"RTL-8168b/8111sb",	0x38, 0xff7e1880,},
260 	{"RTL-8168d/8111d",	0x28, 0xff7e1880,},
261 	{"RTL-8168evl/8111evl",	0x2e, 0xff7e1880,},
262 	{"RTL-8168/8111g",	0x4c, 0xff7e1880,},
263 	{"RTL-8101e",		0x34, 0xff7e1880,},
264 	{"RTL-8100e",		0x32, 0xff7e1880,},
265 };
266 
267 enum _DescStatusBit {
268 	OWNbit = 0x80000000,
269 	EORbit = 0x40000000,
270 	FSbit = 0x20000000,
271 	LSbit = 0x10000000,
272 };
273 
274 struct TxDesc {
275 	u32 status;
276 	u32 vlan_tag;
277 	u32 buf_addr;
278 	u32 buf_Haddr;
279 };
280 
281 struct RxDesc {
282 	u32 status;
283 	u32 vlan_tag;
284 	u32 buf_addr;
285 	u32 buf_Haddr;
286 };
287 
288 static unsigned char rxdata[RX_BUF_LEN];
289 
290 #define RTL8169_DESC_SIZE 16
291 
292 #if ARCH_DMA_MINALIGN > 256
293 #  define RTL8169_ALIGN ARCH_DMA_MINALIGN
294 #else
295 #  define RTL8169_ALIGN 256
296 #endif
297 
298 /*
299  * Warn if the cache-line size is larger than the descriptor size. In such
300  * cases the driver will likely fail because the CPU needs to flush the cache
301  * when requeuing RX buffers, therefore descriptors written by the hardware
302  * may be discarded.
303  *
304  * This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause
305  * the driver to allocate descriptors from a pool of non-cached memory.
306  */
307 #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN
308 #if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \
309 	!defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_X86)
310 #warning cache-line size is larger than descriptor size
311 #endif
312 #endif
313 
314 /*
315  * Create a static buffer of size RX_BUF_SZ for each TX Descriptor. All
316  * descriptors point to a part of this buffer.
317  */
318 DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
319 
320 /*
321  * Create a static buffer of size RX_BUF_SZ for each RX Descriptor. All
322  * descriptors point to a part of this buffer.
323  */
324 DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
325 
326 struct rtl8169_private {
327 	ulong iobase;
328 	void *mmio_addr;	/* memory map physical address */
329 	int chipset;
330 	unsigned long cur_rx;	/* Index into the Rx descriptor buffer of next Rx pkt. */
331 	unsigned long cur_tx;	/* Index into the Tx descriptor buffer of next Rx pkt. */
332 	unsigned long dirty_tx;
333 	struct TxDesc *TxDescArray;	/* Index of 256-alignment Tx Descriptor buffer */
334 	struct RxDesc *RxDescArray;	/* Index of 256-alignment Rx Descriptor buffer */
335 	unsigned char *RxBufferRings;	/* Index of Rx Buffer  */
336 	unsigned char *RxBufferRing[NUM_RX_DESC];	/* Index of Rx Buffer array */
337 	unsigned char *Tx_skbuff[NUM_TX_DESC];
338 } tpx;
339 
340 static struct rtl8169_private *tpc;
341 
342 static const u16 rtl8169_intr_mask =
343     SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr |
344     TxOK | RxErr | RxOK;
345 static const unsigned int rtl8169_rx_config =
346     (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
347 
348 static struct pci_device_id supported[] = {
349 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) },
350 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) },
351 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) },
352 	{}
353 };
354 
355 void mdio_write(int RegAddr, int value)
356 {
357 	int i;
358 
359 	RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
360 	udelay(1000);
361 
362 	for (i = 2000; i > 0; i--) {
363 		/* Check if the RTL8169 has completed writing to the specified MII register */
364 		if (!(RTL_R32(PHYAR) & 0x80000000)) {
365 			break;
366 		} else {
367 			udelay(100);
368 		}
369 	}
370 }
371 
372 int mdio_read(int RegAddr)
373 {
374 	int i, value = -1;
375 
376 	RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
377 	udelay(1000);
378 
379 	for (i = 2000; i > 0; i--) {
380 		/* Check if the RTL8169 has completed retrieving data from the specified MII register */
381 		if (RTL_R32(PHYAR) & 0x80000000) {
382 			value = (int) (RTL_R32(PHYAR) & 0xFFFF);
383 			break;
384 		} else {
385 			udelay(100);
386 		}
387 	}
388 	return value;
389 }
390 
391 static int rtl8169_init_board(unsigned long dev_iobase, const char *name)
392 {
393 	int i;
394 	u32 tmp;
395 
396 #ifdef DEBUG_RTL8169
397 	printf ("%s\n", __FUNCTION__);
398 #endif
399 	ioaddr = dev_iobase;
400 
401 	/* Soft reset the chip. */
402 	RTL_W8(ChipCmd, CmdReset);
403 
404 	/* Check that the chip has finished the reset. */
405 	for (i = 1000; i > 0; i--)
406 		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
407 			break;
408 		else
409 			udelay(10);
410 
411 	/* identify chip attached to board */
412 	tmp = RTL_R32(TxConfig);
413 	tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24;
414 
415 	for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
416 		if (tmp == rtl_chip_info[i].version) {
417 			tpc->chipset = i;
418 			goto match;
419 		}
420 	}
421 
422 	/* if unknown chip, assume array element #0, original RTL-8169 in this case */
423 	printf("PCI device %s: unknown chip version, assuming RTL-8169\n",
424 	       name);
425 	printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
426 	tpc->chipset = 0;
427 
428 match:
429 	return 0;
430 }
431 
432 /*
433  * TX and RX descriptors are 16 bytes. This causes problems with the cache
434  * maintenance on CPUs where the cache-line size exceeds the size of these
435  * descriptors. What will happen is that when the driver receives a packet
436  * it will be immediately requeued for the hardware to reuse. The CPU will
437  * therefore need to flush the cache-line containing the descriptor, which
438  * will cause all other descriptors in the same cache-line to be flushed
439  * along with it. If one of those descriptors had been written to by the
440  * device those changes (and the associated packet) will be lost.
441  *
442  * To work around this, we make use of non-cached memory if available. If
443  * descriptors are mapped uncached there's no need to manually flush them
444  * or invalidate them.
445  *
446  * Note that this only applies to descriptors. The packet data buffers do
447  * not have the same constraints since they are 1536 bytes large, so they
448  * are unlikely to share cache-lines.
449  */
450 static void *rtl_alloc_descs(unsigned int num)
451 {
452 	size_t size = num * RTL8169_DESC_SIZE;
453 
454 #ifdef CONFIG_SYS_NONCACHED_MEMORY
455 	return (void *)noncached_alloc(size, RTL8169_ALIGN);
456 #else
457 	return memalign(RTL8169_ALIGN, size);
458 #endif
459 }
460 
461 /*
462  * Cache maintenance functions. These are simple wrappers around the more
463  * general purpose flush_cache() and invalidate_dcache_range() functions.
464  */
465 
466 static void rtl_inval_rx_desc(struct RxDesc *desc)
467 {
468 #ifndef CONFIG_SYS_NONCACHED_MEMORY
469 	unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
470 	unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
471 
472 	invalidate_dcache_range(start, end);
473 #endif
474 }
475 
476 static void rtl_flush_rx_desc(struct RxDesc *desc)
477 {
478 #ifndef CONFIG_SYS_NONCACHED_MEMORY
479 	flush_cache((unsigned long)desc, sizeof(*desc));
480 #endif
481 }
482 
483 static void rtl_inval_tx_desc(struct TxDesc *desc)
484 {
485 #ifndef CONFIG_SYS_NONCACHED_MEMORY
486 	unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
487 	unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
488 
489 	invalidate_dcache_range(start, end);
490 #endif
491 }
492 
493 static void rtl_flush_tx_desc(struct TxDesc *desc)
494 {
495 #ifndef CONFIG_SYS_NONCACHED_MEMORY
496 	flush_cache((unsigned long)desc, sizeof(*desc));
497 #endif
498 }
499 
500 static void rtl_inval_buffer(void *buf, size_t size)
501 {
502 	unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
503 	unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
504 
505 	invalidate_dcache_range(start, end);
506 }
507 
508 static void rtl_flush_buffer(void *buf, size_t size)
509 {
510 	flush_cache((unsigned long)buf, size);
511 }
512 
513 /**************************************************************************
514 RECV - Receive a frame
515 ***************************************************************************/
516 #ifdef CONFIG_DM_ETH
517 static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase,
518 			   uchar **packetp)
519 #else
520 static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
521 			   uchar **packetp)
522 #endif
523 {
524 	/* return true if there's an ethernet packet ready to read */
525 	/* nic->packet should contain data on return */
526 	/* nic->packetlen should contain length of data */
527 	int cur_rx;
528 	int length = 0;
529 
530 #ifdef DEBUG_RTL8169_RX
531 	printf ("%s\n", __FUNCTION__);
532 #endif
533 	ioaddr = dev_iobase;
534 
535 	cur_rx = tpc->cur_rx;
536 
537 	rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]);
538 
539 	if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
540 		if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
541 			length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
542 						status) & 0x00001FFF) - 4;
543 
544 			rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length);
545 			memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
546 
547 			if (cur_rx == NUM_RX_DESC - 1)
548 				tpc->RxDescArray[cur_rx].status =
549 					cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
550 			else
551 				tpc->RxDescArray[cur_rx].status =
552 					cpu_to_le32(OWNbit + RX_BUF_SIZE);
553 #ifdef CONFIG_DM_ETH
554 			tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
555 				dm_pci_mem_to_phys(dev,
556 					(pci_addr_t)(unsigned long)
557 					tpc->RxBufferRing[cur_rx]));
558 #else
559 			tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
560 				pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)
561 				tpc->RxBufferRing[cur_rx]));
562 #endif
563 			rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
564 #ifdef CONFIG_DM_ETH
565 			*packetp = rxdata;
566 #else
567 			net_process_received_packet(rxdata, length);
568 #endif
569 		} else {
570 			puts("Error Rx");
571 			length = -EIO;
572 		}
573 		cur_rx = (cur_rx + 1) % NUM_RX_DESC;
574 		tpc->cur_rx = cur_rx;
575 		return length;
576 
577 	} else {
578 		ushort sts = RTL_R8(IntrStatus);
579 		RTL_W8(IntrStatus, sts & ~(TxErr | RxErr | SYSErr));
580 		udelay(100);	/* wait */
581 	}
582 	tpc->cur_rx = cur_rx;
583 	return (0);		/* initially as this is called to flush the input */
584 }
585 
586 #ifdef CONFIG_DM_ETH
587 int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp)
588 {
589 	struct rtl8169_private *priv = dev_get_priv(dev);
590 
591 	return rtl_recv_common(dev, priv->iobase, packetp);
592 }
593 #else
594 static int rtl_recv(struct eth_device *dev)
595 {
596 	return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv,
597 			       dev->iobase, NULL);
598 }
599 #endif /* nCONFIG_DM_ETH */
600 
601 #define HZ 1000
602 /**************************************************************************
603 SEND - Transmit a frame
604 ***************************************************************************/
605 #ifdef CONFIG_DM_ETH
606 static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase,
607 			   void *packet, int length)
608 #else
609 static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
610 			   void *packet, int length)
611 #endif
612 {
613 	/* send the packet to destination */
614 
615 	u32 to;
616 	u8 *ptxb;
617 	int entry = tpc->cur_tx % NUM_TX_DESC;
618 	u32 len = length;
619 	int ret;
620 
621 #ifdef DEBUG_RTL8169_TX
622 	int stime = currticks();
623 	printf ("%s\n", __FUNCTION__);
624 	printf("sending %d bytes\n", len);
625 #endif
626 
627 	ioaddr = dev_iobase;
628 
629 	/* point to the current txb incase multiple tx_rings are used */
630 	ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
631 	memcpy(ptxb, (char *)packet, (int)length);
632 	rtl_flush_buffer(ptxb, length);
633 
634 	while (len < ETH_ZLEN)
635 		ptxb[len++] = '\0';
636 
637 	tpc->TxDescArray[entry].buf_Haddr = 0;
638 #ifdef CONFIG_DM_ETH
639 	tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
640 		dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
641 #else
642 	tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
643 		pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
644 #endif
645 	if (entry != (NUM_TX_DESC - 1)) {
646 		tpc->TxDescArray[entry].status =
647 			cpu_to_le32((OWNbit | FSbit | LSbit) |
648 				    ((len > ETH_ZLEN) ? len : ETH_ZLEN));
649 	} else {
650 		tpc->TxDescArray[entry].status =
651 			cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
652 				    ((len > ETH_ZLEN) ? len : ETH_ZLEN));
653 	}
654 	rtl_flush_tx_desc(&tpc->TxDescArray[entry]);
655 	RTL_W8(TxPoll, 0x40);	/* set polling bit */
656 
657 	tpc->cur_tx++;
658 	to = currticks() + TX_TIMEOUT;
659 	do {
660 		rtl_inval_tx_desc(&tpc->TxDescArray[entry]);
661 	} while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
662 				&& (currticks() < to));	/* wait */
663 
664 	if (currticks() >= to) {
665 #ifdef DEBUG_RTL8169_TX
666 		puts("tx timeout/error\n");
667 		printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
668 #endif
669 		ret = 0;
670 	} else {
671 #ifdef DEBUG_RTL8169_TX
672 		puts("tx done\n");
673 #endif
674 		ret = length;
675 	}
676 	/* Delay to make net console (nc) work properly */
677 	udelay(20);
678 	return ret;
679 }
680 
681 #ifdef CONFIG_DM_ETH
682 int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
683 {
684 	struct rtl8169_private *priv = dev_get_priv(dev);
685 
686 	return rtl_send_common(dev, priv->iobase, packet, length);
687 }
688 
689 #else
690 static int rtl_send(struct eth_device *dev, void *packet, int length)
691 {
692 	return rtl_send_common((pci_dev_t)(unsigned long)dev->priv,
693 			       dev->iobase, packet, length);
694 }
695 #endif
696 
697 static void rtl8169_set_rx_mode(void)
698 {
699 	u32 mc_filter[2];	/* Multicast hash filter */
700 	int rx_mode;
701 	u32 tmp = 0;
702 
703 #ifdef DEBUG_RTL8169
704 	printf ("%s\n", __FUNCTION__);
705 #endif
706 
707 	/* IFF_ALLMULTI */
708 	/* Too many to filter perfectly -- accept all multicasts. */
709 	rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
710 	mc_filter[1] = mc_filter[0] = 0xffffffff;
711 
712 	tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) &
713 				   rtl_chip_info[tpc->chipset].RxConfigMask);
714 
715 	RTL_W32(RxConfig, tmp);
716 	RTL_W32(MAR0 + 0, mc_filter[0]);
717 	RTL_W32(MAR0 + 4, mc_filter[1]);
718 }
719 
720 #ifdef CONFIG_DM_ETH
721 static void rtl8169_hw_start(struct udevice *dev)
722 #else
723 static void rtl8169_hw_start(pci_dev_t dev)
724 #endif
725 {
726 	u32 i;
727 
728 #ifdef DEBUG_RTL8169
729 	int stime = currticks();
730 	printf ("%s\n", __FUNCTION__);
731 #endif
732 
733 #if 0
734 	/* Soft reset the chip. */
735 	RTL_W8(ChipCmd, CmdReset);
736 
737 	/* Check that the chip has finished the reset. */
738 	for (i = 1000; i > 0; i--) {
739 		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
740 			break;
741 		else
742 			udelay(10);
743 	}
744 #endif
745 
746 	RTL_W8(Cfg9346, Cfg9346_Unlock);
747 
748 	/* RTL-8169sb/8110sb or previous version */
749 	if (tpc->chipset <= 5)
750 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
751 
752 	RTL_W8(EarlyTxThres, EarlyTxThld);
753 
754 	/* For gigabit rtl8169 */
755 	RTL_W16(RxMaxSize, RxPacketMaxSize);
756 
757 	/* Set Rx Config register */
758 	i = rtl8169_rx_config | (RTL_R32(RxConfig) &
759 				 rtl_chip_info[tpc->chipset].RxConfigMask);
760 	RTL_W32(RxConfig, i);
761 
762 	/* Set DMA burst size and Interframe Gap Time */
763 	RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
764 				(InterFrameGap << TxInterFrameGapShift));
765 
766 
767 	tpc->cur_rx = 0;
768 
769 #ifdef CONFIG_DM_ETH
770 	RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev,
771 			(pci_addr_t)(unsigned long)tpc->TxDescArray));
772 #else
773 	RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev,
774 			(pci_addr_t)(unsigned long)tpc->TxDescArray));
775 #endif
776 	RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
777 #ifdef CONFIG_DM_ETH
778 	RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys(
779 			dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
780 #else
781 	RTL_W32(RxDescStartAddrLow, pci_mem_to_phys(
782 			dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
783 #endif
784 	RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
785 
786 	/* RTL-8169sc/8110sc or later version */
787 	if (tpc->chipset > 5)
788 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
789 
790 	RTL_W8(Cfg9346, Cfg9346_Lock);
791 	udelay(10);
792 
793 	RTL_W32(RxMissed, 0);
794 
795 	rtl8169_set_rx_mode();
796 
797 	/* no early-rx interrupts */
798 	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
799 
800 #ifdef DEBUG_RTL8169
801 	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
802 #endif
803 }
804 
805 #ifdef CONFIG_DM_ETH
806 static void rtl8169_init_ring(struct udevice *dev)
807 #else
808 static void rtl8169_init_ring(pci_dev_t dev)
809 #endif
810 {
811 	int i;
812 
813 #ifdef DEBUG_RTL8169
814 	int stime = currticks();
815 	printf ("%s\n", __FUNCTION__);
816 #endif
817 
818 	tpc->cur_rx = 0;
819 	tpc->cur_tx = 0;
820 	tpc->dirty_tx = 0;
821 	memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc));
822 	memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc));
823 
824 	for (i = 0; i < NUM_TX_DESC; i++) {
825 		tpc->Tx_skbuff[i] = &txb[i];
826 	}
827 
828 	for (i = 0; i < NUM_RX_DESC; i++) {
829 		if (i == (NUM_RX_DESC - 1))
830 			tpc->RxDescArray[i].status =
831 				cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
832 		else
833 			tpc->RxDescArray[i].status =
834 				cpu_to_le32(OWNbit + RX_BUF_SIZE);
835 
836 		tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
837 #ifdef CONFIG_DM_ETH
838 		tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys(
839 			dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
840 #else
841 		tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys(
842 			dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
843 #endif
844 		rtl_flush_rx_desc(&tpc->RxDescArray[i]);
845 	}
846 
847 #ifdef DEBUG_RTL8169
848 	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
849 #endif
850 }
851 
852 #ifdef CONFIG_DM_ETH
853 static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr)
854 #else
855 static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr)
856 #endif
857 {
858 	int i;
859 
860 #ifdef DEBUG_RTL8169
861 	int stime = currticks();
862 	printf ("%s\n", __FUNCTION__);
863 #endif
864 
865 	rtl8169_init_ring(dev);
866 	rtl8169_hw_start(dev);
867 	/* Construct a perfect filter frame with the mac address as first match
868 	 * and broadcast for all others */
869 	for (i = 0; i < 192; i++)
870 		txb[i] = 0xFF;
871 
872 	txb[0] = enetaddr[0];
873 	txb[1] = enetaddr[1];
874 	txb[2] = enetaddr[2];
875 	txb[3] = enetaddr[3];
876 	txb[4] = enetaddr[4];
877 	txb[5] = enetaddr[5];
878 
879 #ifdef DEBUG_RTL8169
880 	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
881 #endif
882 }
883 
884 #ifdef CONFIG_DM_ETH
885 static int rtl8169_eth_start(struct udevice *dev)
886 {
887 	struct eth_pdata *plat = dev_get_platdata(dev);
888 
889 	rtl8169_common_start(dev, plat->enetaddr);
890 
891 	return 0;
892 }
893 #else
894 /**************************************************************************
895 RESET - Finish setting up the ethernet interface
896 ***************************************************************************/
897 static int rtl_reset(struct eth_device *dev, bd_t *bis)
898 {
899 	rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv,
900 			     dev->enetaddr);
901 
902 	return 0;
903 }
904 #endif /* nCONFIG_DM_ETH */
905 
906 static void rtl_halt_common(unsigned long dev_iobase)
907 {
908 	int i;
909 
910 #ifdef DEBUG_RTL8169
911 	printf ("%s\n", __FUNCTION__);
912 #endif
913 
914 	ioaddr = dev_iobase;
915 
916 	/* Stop the chip's Tx and Rx DMA processes. */
917 	RTL_W8(ChipCmd, 0x00);
918 
919 	/* Disable interrupts by clearing the interrupt mask. */
920 	RTL_W16(IntrMask, 0x0000);
921 
922 	RTL_W32(RxMissed, 0);
923 
924 	for (i = 0; i < NUM_RX_DESC; i++) {
925 		tpc->RxBufferRing[i] = NULL;
926 	}
927 }
928 
929 #ifdef CONFIG_DM_ETH
930 void rtl8169_eth_stop(struct udevice *dev)
931 {
932 	struct rtl8169_private *priv = dev_get_priv(dev);
933 
934 	rtl_halt_common(priv->iobase);
935 }
936 #else
937 /**************************************************************************
938 HALT - Turn off ethernet interface
939 ***************************************************************************/
940 static void rtl_halt(struct eth_device *dev)
941 {
942 	rtl_halt_common(dev->iobase);
943 }
944 #endif
945 
946 /**************************************************************************
947 INIT - Look for an adapter, this routine's visible to the outside
948 ***************************************************************************/
949 
950 #define board_found 1
951 #define valid_link 0
952 static int rtl_init(unsigned long dev_ioaddr, const char *name,
953 		    unsigned char *enetaddr)
954 {
955 	static int board_idx = -1;
956 	int i, rc;
957 	int option = -1, Cap10_100 = 0, Cap1000 = 0;
958 
959 #ifdef DEBUG_RTL8169
960 	printf ("%s\n", __FUNCTION__);
961 #endif
962 	ioaddr = dev_ioaddr;
963 
964 	board_idx++;
965 
966 	/* point to private storage */
967 	tpc = &tpx;
968 
969 	rc = rtl8169_init_board(ioaddr, name);
970 	if (rc)
971 		return rc;
972 
973 	/* Get MAC address.  FIXME: read EEPROM */
974 	for (i = 0; i < MAC_ADDR_LEN; i++)
975 		enetaddr[i] = RTL_R8(MAC0 + i);
976 
977 #ifdef DEBUG_RTL8169
978 	printf("chipset = %d\n", tpc->chipset);
979 	printf("MAC Address");
980 	for (i = 0; i < MAC_ADDR_LEN; i++)
981 		printf(":%02x", enetaddr[i]);
982 	putc('\n');
983 #endif
984 
985 #ifdef DEBUG_RTL8169
986 	/* Print out some hardware info */
987 	printf("%s: at ioaddr 0x%lx\n", name, ioaddr);
988 #endif
989 
990 	/* if TBI is not endbled */
991 	if (!(RTL_R8(PHYstatus) & TBI_Enable)) {
992 		int val = mdio_read(PHY_AUTO_NEGO_REG);
993 
994 		option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
995 		/* Force RTL8169 in 10/100/1000 Full/Half mode. */
996 		if (option > 0) {
997 #ifdef DEBUG_RTL8169
998 			printf("%s: Force-mode Enabled.\n", name);
999 #endif
1000 			Cap10_100 = 0, Cap1000 = 0;
1001 			switch (option) {
1002 			case _10_Half:
1003 				Cap10_100 = PHY_Cap_10_Half;
1004 				Cap1000 = PHY_Cap_Null;
1005 				break;
1006 			case _10_Full:
1007 				Cap10_100 = PHY_Cap_10_Full;
1008 				Cap1000 = PHY_Cap_Null;
1009 				break;
1010 			case _100_Half:
1011 				Cap10_100 = PHY_Cap_100_Half;
1012 				Cap1000 = PHY_Cap_Null;
1013 				break;
1014 			case _100_Full:
1015 				Cap10_100 = PHY_Cap_100_Full;
1016 				Cap1000 = PHY_Cap_Null;
1017 				break;
1018 			case _1000_Full:
1019 				Cap10_100 = PHY_Cap_Null;
1020 				Cap1000 = PHY_Cap_1000_Full;
1021 				break;
1022 			default:
1023 				break;
1024 			}
1025 			mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F));	/* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
1026 			mdio_write(PHY_1000_CTRL_REG, Cap1000);
1027 		} else {
1028 #ifdef DEBUG_RTL8169
1029 			printf("%s: Auto-negotiation Enabled.\n",
1030 			       name);
1031 #endif
1032 			/* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
1033 			mdio_write(PHY_AUTO_NEGO_REG,
1034 				   PHY_Cap_10_Half | PHY_Cap_10_Full |
1035 				   PHY_Cap_100_Half | PHY_Cap_100_Full |
1036 				   (val & 0x1F));
1037 
1038 			/* enable 1000 Full Mode */
1039 			mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full);
1040 
1041 		}
1042 
1043 		/* Enable auto-negotiation and restart auto-nigotiation */
1044 		mdio_write(PHY_CTRL_REG,
1045 			   PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
1046 		udelay(100);
1047 
1048 		/* wait for auto-negotiation process */
1049 		for (i = 10000; i > 0; i--) {
1050 			/* check if auto-negotiation complete */
1051 			if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) {
1052 				udelay(100);
1053 				option = RTL_R8(PHYstatus);
1054 				if (option & _1000bpsF) {
1055 #ifdef DEBUG_RTL8169
1056 					printf("%s: 1000Mbps Full-duplex operation.\n",
1057 					       name);
1058 #endif
1059 				} else {
1060 #ifdef DEBUG_RTL8169
1061 					printf("%s: %sMbps %s-duplex operation.\n",
1062 					       name,
1063 					       (option & _100bps) ? "100" :
1064 					       "10",
1065 					       (option & FullDup) ? "Full" :
1066 					       "Half");
1067 #endif
1068 				}
1069 				break;
1070 			} else {
1071 				udelay(100);
1072 			}
1073 		}		/* end for-loop to wait for auto-negotiation process */
1074 
1075 	} else {
1076 		udelay(100);
1077 #ifdef DEBUG_RTL8169
1078 		printf
1079 		    ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n",
1080 		     name,
1081 		     (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed");
1082 #endif
1083 	}
1084 
1085 
1086 	tpc->RxDescArray = rtl_alloc_descs(NUM_RX_DESC);
1087 	if (!tpc->RxDescArray)
1088 		return -ENOMEM;
1089 
1090 	tpc->TxDescArray = rtl_alloc_descs(NUM_TX_DESC);
1091 	if (!tpc->TxDescArray)
1092 		return -ENOMEM;
1093 
1094 	return 0;
1095 }
1096 
1097 #ifndef CONFIG_DM_ETH
1098 int rtl8169_initialize(bd_t *bis)
1099 {
1100 	pci_dev_t devno;
1101 	int card_number = 0;
1102 	struct eth_device *dev;
1103 	u32 iobase;
1104 	int idx=0;
1105 
1106 	while(1){
1107 		unsigned int region;
1108 		u16 device;
1109 		int err;
1110 
1111 		/* Find RTL8169 */
1112 		if ((devno = pci_find_devices(supported, idx++)) < 0)
1113 			break;
1114 
1115 		pci_read_config_word(devno, PCI_DEVICE_ID, &device);
1116 		switch (device) {
1117 		case 0x8168:
1118 			region = 2;
1119 			break;
1120 
1121 		default:
1122 			region = 1;
1123 			break;
1124 		}
1125 
1126 		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
1127 		iobase &= ~0xf;
1128 
1129 		debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
1130 
1131 		dev = (struct eth_device *)malloc(sizeof *dev);
1132 		if (!dev) {
1133 			printf("Can not allocate memory of rtl8169\n");
1134 			break;
1135 		}
1136 
1137 		memset(dev, 0, sizeof(*dev));
1138 		sprintf (dev->name, "RTL8169#%d", card_number);
1139 
1140 		dev->priv = (void *)(unsigned long)devno;
1141 		dev->iobase = (int)pci_mem_to_phys(devno, iobase);
1142 
1143 		dev->init = rtl_reset;
1144 		dev->halt = rtl_halt;
1145 		dev->send = rtl_send;
1146 		dev->recv = rtl_recv;
1147 
1148 		err = rtl_init(dev->iobase, dev->name, dev->enetaddr);
1149 		if (err < 0) {
1150 			printf(pr_fmt("failed to initialize card: %d\n"), err);
1151 			free(dev);
1152 			continue;
1153 		}
1154 
1155 		eth_register (dev);
1156 
1157 		card_number++;
1158 	}
1159 	return card_number;
1160 }
1161 #endif
1162 
1163 #ifdef CONFIG_DM_ETH
1164 static int rtl8169_eth_probe(struct udevice *dev)
1165 {
1166 	struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
1167 	struct rtl8169_private *priv = dev_get_priv(dev);
1168 	struct eth_pdata *plat = dev_get_platdata(dev);
1169 	u32 iobase;
1170 	int region;
1171 	int ret;
1172 
1173 	debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
1174 	switch (pplat->device) {
1175 	case 0x8168:
1176 		region = 2;
1177 		break;
1178 	default:
1179 		region = 1;
1180 		break;
1181 	}
1182 	dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase);
1183 	iobase &= ~0xf;
1184 	priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase);
1185 
1186 	ret = rtl_init(priv->iobase, dev->name, plat->enetaddr);
1187 	if (ret < 0) {
1188 		printf(pr_fmt("failed to initialize card: %d\n"), ret);
1189 		return ret;
1190 	}
1191 
1192 	return 0;
1193 }
1194 
1195 static const struct eth_ops rtl8169_eth_ops = {
1196 	.start	= rtl8169_eth_start,
1197 	.send	= rtl8169_eth_send,
1198 	.recv	= rtl8169_eth_recv,
1199 	.stop	= rtl8169_eth_stop,
1200 };
1201 
1202 static const struct udevice_id rtl8169_eth_ids[] = {
1203 	{ .compatible = "realtek,rtl8169" },
1204 	{ }
1205 };
1206 
1207 U_BOOT_DRIVER(eth_rtl8169) = {
1208 	.name	= "eth_rtl8169",
1209 	.id	= UCLASS_ETH,
1210 	.of_match = rtl8169_eth_ids,
1211 	.probe	= rtl8169_eth_probe,
1212 	.ops	= &rtl8169_eth_ops,
1213 	.priv_auto_alloc_size = sizeof(struct rtl8169_private),
1214 	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
1215 };
1216 
1217 U_BOOT_PCI_DEVICE(eth_rtl8169, supported);
1218 #endif
1219