1 /* 2 * rtl8169.c : U-Boot driver for the RealTek RTL8169 3 * 4 * Masami Komiya (mkomiya@sonare.it) 5 * 6 * Most part is taken from r8169.c of etherboot 7 * 8 */ 9 10 /************************************************************************** 11 * r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit 12 * Written 2003 by Timothy Legge <tlegge@rogers.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 * 16 * Portions of this code based on: 17 * r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver 18 * for Linux kernel 2.4.x. 19 * 20 * Written 2002 ShuChen <shuchen@realtek.com.tw> 21 * See Linux Driver for full information 22 * 23 * Linux Driver Version 1.27a, 10.02.2002 24 * 25 * Thanks to: 26 * Jean Chen of RealTek Semiconductor Corp. for 27 * providing the evaluation NIC used to develop 28 * this driver. RealTek's support for Etherboot 29 * is appreciated. 30 * 31 * REVISION HISTORY: 32 * ================ 33 * 34 * v1.0 11-26-2003 timlegge Initial port of Linux driver 35 * v1.5 01-17-2004 timlegge Initial driver output cleanup 36 * 37 * Indent Options: indent -kr -i8 38 ***************************************************************************/ 39 /* 40 * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> 41 * Modified to use le32_to_cpu and cpu_to_le32 properly 42 */ 43 #include <common.h> 44 #include <dm.h> 45 #include <errno.h> 46 #include <malloc.h> 47 #include <memalign.h> 48 #include <net.h> 49 #ifndef CONFIG_DM_ETH 50 #include <netdev.h> 51 #endif 52 #include <asm/io.h> 53 #include <pci.h> 54 55 #undef DEBUG_RTL8169 56 #undef DEBUG_RTL8169_TX 57 #undef DEBUG_RTL8169_RX 58 59 #define drv_version "v1.5" 60 #define drv_date "01-17-2004" 61 62 static unsigned long ioaddr; 63 64 /* Condensed operations for readability. */ 65 #define currticks() get_timer(0) 66 67 /* media options */ 68 #define MAX_UNITS 8 69 static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; 70 71 /* MAC address length*/ 72 #define MAC_ADDR_LEN 6 73 74 /* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/ 75 #define MAX_ETH_FRAME_SIZE 1536 76 77 #define TX_FIFO_THRESH 256 /* In bytes */ 78 79 #define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ 80 #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ 81 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ 82 #define EarlyTxThld 0x3F /* 0x3F means NO early transmit */ 83 #define RxPacketMaxSize 0x0800 /* Maximum size supported is 16K-1 */ 84 #define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ 85 86 #define NUM_TX_DESC 1 /* Number of Tx descriptor registers */ 87 #ifdef CONFIG_SYS_RX_ETH_BUFFER 88 #define NUM_RX_DESC CONFIG_SYS_RX_ETH_BUFFER 89 #else 90 #define NUM_RX_DESC 4 /* Number of Rx descriptor registers */ 91 #endif 92 #define RX_BUF_SIZE 1536 /* Rx Buffer size */ 93 #define RX_BUF_LEN 8192 94 95 #define RTL_MIN_IO_SIZE 0x80 96 #define TX_TIMEOUT (6*HZ) 97 98 /* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */ 99 #define RTL_W8(reg, val8) writeb((val8), ioaddr + (reg)) 100 #define RTL_W16(reg, val16) writew((val16), ioaddr + (reg)) 101 #define RTL_W32(reg, val32) writel((val32), ioaddr + (reg)) 102 #define RTL_R8(reg) readb(ioaddr + (reg)) 103 #define RTL_R16(reg) readw(ioaddr + (reg)) 104 #define RTL_R32(reg) readl(ioaddr + (reg)) 105 106 #define ETH_FRAME_LEN MAX_ETH_FRAME_SIZE 107 #define ETH_ALEN MAC_ADDR_LEN 108 #define ETH_ZLEN 60 109 110 #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \ 111 (pci_addr_t)(unsigned long)a) 112 #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \ 113 (phys_addr_t)a) 114 115 enum RTL8169_registers { 116 MAC0 = 0, /* Ethernet hardware address. */ 117 MAR0 = 8, /* Multicast filter. */ 118 TxDescStartAddrLow = 0x20, 119 TxDescStartAddrHigh = 0x24, 120 TxHDescStartAddrLow = 0x28, 121 TxHDescStartAddrHigh = 0x2c, 122 FLASH = 0x30, 123 ERSR = 0x36, 124 ChipCmd = 0x37, 125 TxPoll = 0x38, 126 IntrMask = 0x3C, 127 IntrStatus = 0x3E, 128 TxConfig = 0x40, 129 RxConfig = 0x44, 130 RxMissed = 0x4C, 131 Cfg9346 = 0x50, 132 Config0 = 0x51, 133 Config1 = 0x52, 134 Config2 = 0x53, 135 Config3 = 0x54, 136 Config4 = 0x55, 137 Config5 = 0x56, 138 MultiIntr = 0x5C, 139 PHYAR = 0x60, 140 TBICSR = 0x64, 141 TBI_ANAR = 0x68, 142 TBI_LPAR = 0x6A, 143 PHYstatus = 0x6C, 144 RxMaxSize = 0xDA, 145 CPlusCmd = 0xE0, 146 RxDescStartAddrLow = 0xE4, 147 RxDescStartAddrHigh = 0xE8, 148 EarlyTxThres = 0xEC, 149 FuncEvent = 0xF0, 150 FuncEventMask = 0xF4, 151 FuncPresetState = 0xF8, 152 FuncForceEvent = 0xFC, 153 }; 154 155 enum RTL8169_register_content { 156 /*InterruptStatusBits */ 157 SYSErr = 0x8000, 158 PCSTimeout = 0x4000, 159 SWInt = 0x0100, 160 TxDescUnavail = 0x80, 161 RxFIFOOver = 0x40, 162 RxUnderrun = 0x20, 163 RxOverflow = 0x10, 164 TxErr = 0x08, 165 TxOK = 0x04, 166 RxErr = 0x02, 167 RxOK = 0x01, 168 169 /*RxStatusDesc */ 170 RxRES = 0x00200000, 171 RxCRC = 0x00080000, 172 RxRUNT = 0x00100000, 173 RxRWT = 0x00400000, 174 175 /*ChipCmdBits */ 176 CmdReset = 0x10, 177 CmdRxEnb = 0x08, 178 CmdTxEnb = 0x04, 179 RxBufEmpty = 0x01, 180 181 /*Cfg9346Bits */ 182 Cfg9346_Lock = 0x00, 183 Cfg9346_Unlock = 0xC0, 184 185 /*rx_mode_bits */ 186 AcceptErr = 0x20, 187 AcceptRunt = 0x10, 188 AcceptBroadcast = 0x08, 189 AcceptMulticast = 0x04, 190 AcceptMyPhys = 0x02, 191 AcceptAllPhys = 0x01, 192 193 /*RxConfigBits */ 194 RxCfgFIFOShift = 13, 195 RxCfgDMAShift = 8, 196 197 /*TxConfigBits */ 198 TxInterFrameGapShift = 24, 199 TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ 200 201 /*rtl8169_PHYstatus */ 202 TBI_Enable = 0x80, 203 TxFlowCtrl = 0x40, 204 RxFlowCtrl = 0x20, 205 _1000bpsF = 0x10, 206 _100bps = 0x08, 207 _10bps = 0x04, 208 LinkStatus = 0x02, 209 FullDup = 0x01, 210 211 /*GIGABIT_PHY_registers */ 212 PHY_CTRL_REG = 0, 213 PHY_STAT_REG = 1, 214 PHY_AUTO_NEGO_REG = 4, 215 PHY_1000_CTRL_REG = 9, 216 217 /*GIGABIT_PHY_REG_BIT */ 218 PHY_Restart_Auto_Nego = 0x0200, 219 PHY_Enable_Auto_Nego = 0x1000, 220 221 /* PHY_STAT_REG = 1; */ 222 PHY_Auto_Nego_Comp = 0x0020, 223 224 /* PHY_AUTO_NEGO_REG = 4; */ 225 PHY_Cap_10_Half = 0x0020, 226 PHY_Cap_10_Full = 0x0040, 227 PHY_Cap_100_Half = 0x0080, 228 PHY_Cap_100_Full = 0x0100, 229 230 /* PHY_1000_CTRL_REG = 9; */ 231 PHY_Cap_1000_Full = 0x0200, 232 233 PHY_Cap_Null = 0x0, 234 235 /*_MediaType*/ 236 _10_Half = 0x01, 237 _10_Full = 0x02, 238 _100_Half = 0x04, 239 _100_Full = 0x08, 240 _1000_Full = 0x10, 241 242 /*_TBICSRBit*/ 243 TBILinkOK = 0x02000000, 244 }; 245 246 static struct { 247 const char *name; 248 u8 version; /* depend on RTL8169 docs */ 249 u32 RxConfigMask; /* should clear the bits supported by this chip */ 250 } rtl_chip_info[] = { 251 {"RTL-8169", 0x00, 0xff7e1880,}, 252 {"RTL-8169", 0x04, 0xff7e1880,}, 253 {"RTL-8169", 0x00, 0xff7e1880,}, 254 {"RTL-8169s/8110s", 0x02, 0xff7e1880,}, 255 {"RTL-8169s/8110s", 0x04, 0xff7e1880,}, 256 {"RTL-8169sb/8110sb", 0x10, 0xff7e1880,}, 257 {"RTL-8169sc/8110sc", 0x18, 0xff7e1880,}, 258 {"RTL-8168b/8111sb", 0x30, 0xff7e1880,}, 259 {"RTL-8168b/8111sb", 0x38, 0xff7e1880,}, 260 {"RTL-8168d/8111d", 0x28, 0xff7e1880,}, 261 {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,}, 262 {"RTL-8168/8111g", 0x4c, 0xff7e1880,}, 263 {"RTL-8101e", 0x34, 0xff7e1880,}, 264 {"RTL-8100e", 0x32, 0xff7e1880,}, 265 }; 266 267 enum _DescStatusBit { 268 OWNbit = 0x80000000, 269 EORbit = 0x40000000, 270 FSbit = 0x20000000, 271 LSbit = 0x10000000, 272 }; 273 274 struct TxDesc { 275 u32 status; 276 u32 vlan_tag; 277 u32 buf_addr; 278 u32 buf_Haddr; 279 }; 280 281 struct RxDesc { 282 u32 status; 283 u32 vlan_tag; 284 u32 buf_addr; 285 u32 buf_Haddr; 286 }; 287 288 static unsigned char rxdata[RX_BUF_LEN]; 289 290 #define RTL8169_DESC_SIZE 16 291 292 #if ARCH_DMA_MINALIGN > 256 293 # define RTL8169_ALIGN ARCH_DMA_MINALIGN 294 #else 295 # define RTL8169_ALIGN 256 296 #endif 297 298 /* 299 * Warn if the cache-line size is larger than the descriptor size. In such 300 * cases the driver will likely fail because the CPU needs to flush the cache 301 * when requeuing RX buffers, therefore descriptors written by the hardware 302 * may be discarded. 303 * 304 * This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause 305 * the driver to allocate descriptors from a pool of non-cached memory. 306 */ 307 #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN 308 #if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \ 309 !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_X86) 310 #warning cache-line size is larger than descriptor size 311 #endif 312 #endif 313 314 /* 315 * Create a static buffer of size RX_BUF_SZ for each TX Descriptor. All 316 * descriptors point to a part of this buffer. 317 */ 318 DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); 319 320 /* 321 * Create a static buffer of size RX_BUF_SZ for each RX Descriptor. All 322 * descriptors point to a part of this buffer. 323 */ 324 DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); 325 326 struct rtl8169_private { 327 ulong iobase; 328 void *mmio_addr; /* memory map physical address */ 329 int chipset; 330 unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ 331 unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ 332 unsigned long dirty_tx; 333 struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */ 334 struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */ 335 unsigned char *RxBufferRings; /* Index of Rx Buffer */ 336 unsigned char *RxBufferRing[NUM_RX_DESC]; /* Index of Rx Buffer array */ 337 unsigned char *Tx_skbuff[NUM_TX_DESC]; 338 } tpx; 339 340 static struct rtl8169_private *tpc; 341 342 static const u16 rtl8169_intr_mask = 343 SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr | 344 TxOK | RxErr | RxOK; 345 static const unsigned int rtl8169_rx_config = 346 (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); 347 348 static struct pci_device_id supported[] = { 349 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) }, 350 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) }, 351 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) }, 352 {} 353 }; 354 355 void mdio_write(int RegAddr, int value) 356 { 357 int i; 358 359 RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value); 360 udelay(1000); 361 362 for (i = 2000; i > 0; i--) { 363 /* Check if the RTL8169 has completed writing to the specified MII register */ 364 if (!(RTL_R32(PHYAR) & 0x80000000)) { 365 break; 366 } else { 367 udelay(100); 368 } 369 } 370 } 371 372 int mdio_read(int RegAddr) 373 { 374 int i, value = -1; 375 376 RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16); 377 udelay(1000); 378 379 for (i = 2000; i > 0; i--) { 380 /* Check if the RTL8169 has completed retrieving data from the specified MII register */ 381 if (RTL_R32(PHYAR) & 0x80000000) { 382 value = (int) (RTL_R32(PHYAR) & 0xFFFF); 383 break; 384 } else { 385 udelay(100); 386 } 387 } 388 return value; 389 } 390 391 static int rtl8169_init_board(unsigned long dev_iobase, const char *name) 392 { 393 int i; 394 u32 tmp; 395 396 #ifdef DEBUG_RTL8169 397 printf ("%s\n", __FUNCTION__); 398 #endif 399 ioaddr = dev_iobase; 400 401 /* Soft reset the chip. */ 402 RTL_W8(ChipCmd, CmdReset); 403 404 /* Check that the chip has finished the reset. */ 405 for (i = 1000; i > 0; i--) 406 if ((RTL_R8(ChipCmd) & CmdReset) == 0) 407 break; 408 else 409 udelay(10); 410 411 /* identify chip attached to board */ 412 tmp = RTL_R32(TxConfig); 413 tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24; 414 415 for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){ 416 if (tmp == rtl_chip_info[i].version) { 417 tpc->chipset = i; 418 goto match; 419 } 420 } 421 422 /* if unknown chip, assume array element #0, original RTL-8169 in this case */ 423 printf("PCI device %s: unknown chip version, assuming RTL-8169\n", 424 name); 425 printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig)); 426 tpc->chipset = 0; 427 428 match: 429 return 0; 430 } 431 432 /* 433 * TX and RX descriptors are 16 bytes. This causes problems with the cache 434 * maintenance on CPUs where the cache-line size exceeds the size of these 435 * descriptors. What will happen is that when the driver receives a packet 436 * it will be immediately requeued for the hardware to reuse. The CPU will 437 * therefore need to flush the cache-line containing the descriptor, which 438 * will cause all other descriptors in the same cache-line to be flushed 439 * along with it. If one of those descriptors had been written to by the 440 * device those changes (and the associated packet) will be lost. 441 * 442 * To work around this, we make use of non-cached memory if available. If 443 * descriptors are mapped uncached there's no need to manually flush them 444 * or invalidate them. 445 * 446 * Note that this only applies to descriptors. The packet data buffers do 447 * not have the same constraints since they are 1536 bytes large, so they 448 * are unlikely to share cache-lines. 449 */ 450 static void *rtl_alloc_descs(unsigned int num) 451 { 452 size_t size = num * RTL8169_DESC_SIZE; 453 454 #ifdef CONFIG_SYS_NONCACHED_MEMORY 455 return (void *)noncached_alloc(size, RTL8169_ALIGN); 456 #else 457 return memalign(RTL8169_ALIGN, size); 458 #endif 459 } 460 461 /* 462 * Cache maintenance functions. These are simple wrappers around the more 463 * general purpose flush_cache() and invalidate_dcache_range() functions. 464 */ 465 466 static void rtl_inval_rx_desc(struct RxDesc *desc) 467 { 468 #ifndef CONFIG_SYS_NONCACHED_MEMORY 469 unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); 470 unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); 471 472 invalidate_dcache_range(start, end); 473 #endif 474 } 475 476 static void rtl_flush_rx_desc(struct RxDesc *desc) 477 { 478 #ifndef CONFIG_SYS_NONCACHED_MEMORY 479 flush_cache((unsigned long)desc, sizeof(*desc)); 480 #endif 481 } 482 483 static void rtl_inval_tx_desc(struct TxDesc *desc) 484 { 485 #ifndef CONFIG_SYS_NONCACHED_MEMORY 486 unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); 487 unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); 488 489 invalidate_dcache_range(start, end); 490 #endif 491 } 492 493 static void rtl_flush_tx_desc(struct TxDesc *desc) 494 { 495 #ifndef CONFIG_SYS_NONCACHED_MEMORY 496 flush_cache((unsigned long)desc, sizeof(*desc)); 497 #endif 498 } 499 500 static void rtl_inval_buffer(void *buf, size_t size) 501 { 502 unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1); 503 unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN); 504 505 invalidate_dcache_range(start, end); 506 } 507 508 static void rtl_flush_buffer(void *buf, size_t size) 509 { 510 flush_cache((unsigned long)buf, size); 511 } 512 513 /************************************************************************** 514 RECV - Receive a frame 515 ***************************************************************************/ 516 #ifdef CONFIG_DM_ETH 517 static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase, 518 uchar **packetp) 519 #else 520 static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase, 521 uchar **packetp) 522 #endif 523 { 524 /* return true if there's an ethernet packet ready to read */ 525 /* nic->packet should contain data on return */ 526 /* nic->packetlen should contain length of data */ 527 int cur_rx; 528 int length = 0; 529 530 #ifdef DEBUG_RTL8169_RX 531 printf ("%s\n", __FUNCTION__); 532 #endif 533 ioaddr = dev_iobase; 534 535 cur_rx = tpc->cur_rx; 536 537 rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]); 538 539 if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { 540 if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { 541 length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. 542 status) & 0x00001FFF) - 4; 543 544 rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length); 545 memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); 546 547 if (cur_rx == NUM_RX_DESC - 1) 548 tpc->RxDescArray[cur_rx].status = 549 cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); 550 else 551 tpc->RxDescArray[cur_rx].status = 552 cpu_to_le32(OWNbit + RX_BUF_SIZE); 553 #ifdef CONFIG_DM_ETH 554 tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32( 555 dm_pci_mem_to_phys(dev, 556 (pci_addr_t)(unsigned long) 557 tpc->RxBufferRing[cur_rx])); 558 #else 559 tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32( 560 pci_mem_to_phys(dev, (pci_addr_t)(unsigned long) 561 tpc->RxBufferRing[cur_rx])); 562 #endif 563 rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]); 564 #ifdef CONFIG_DM_ETH 565 *packetp = rxdata; 566 #else 567 net_process_received_packet(rxdata, length); 568 #endif 569 } else { 570 puts("Error Rx"); 571 length = -EIO; 572 } 573 cur_rx = (cur_rx + 1) % NUM_RX_DESC; 574 tpc->cur_rx = cur_rx; 575 return length; 576 577 } else { 578 ushort sts = RTL_R8(IntrStatus); 579 RTL_W8(IntrStatus, sts & ~(TxErr | RxErr | SYSErr)); 580 udelay(100); /* wait */ 581 } 582 tpc->cur_rx = cur_rx; 583 return (0); /* initially as this is called to flush the input */ 584 } 585 586 #ifdef CONFIG_DM_ETH 587 int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp) 588 { 589 struct rtl8169_private *priv = dev_get_priv(dev); 590 591 return rtl_recv_common(dev, priv->iobase, packetp); 592 } 593 #else 594 static int rtl_recv(struct eth_device *dev) 595 { 596 return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv, 597 dev->iobase, NULL); 598 } 599 #endif /* nCONFIG_DM_ETH */ 600 601 #define HZ 1000 602 /************************************************************************** 603 SEND - Transmit a frame 604 ***************************************************************************/ 605 #ifdef CONFIG_DM_ETH 606 static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase, 607 void *packet, int length) 608 #else 609 static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase, 610 void *packet, int length) 611 #endif 612 { 613 /* send the packet to destination */ 614 615 u32 to; 616 u8 *ptxb; 617 int entry = tpc->cur_tx % NUM_TX_DESC; 618 u32 len = length; 619 int ret; 620 621 #ifdef DEBUG_RTL8169_TX 622 int stime = currticks(); 623 printf ("%s\n", __FUNCTION__); 624 printf("sending %d bytes\n", len); 625 #endif 626 627 ioaddr = dev_iobase; 628 629 /* point to the current txb incase multiple tx_rings are used */ 630 ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; 631 memcpy(ptxb, (char *)packet, (int)length); 632 rtl_flush_buffer(ptxb, length); 633 634 while (len < ETH_ZLEN) 635 ptxb[len++] = '\0'; 636 637 tpc->TxDescArray[entry].buf_Haddr = 0; 638 #ifdef CONFIG_DM_ETH 639 tpc->TxDescArray[entry].buf_addr = cpu_to_le32( 640 dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb)); 641 #else 642 tpc->TxDescArray[entry].buf_addr = cpu_to_le32( 643 pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb)); 644 #endif 645 if (entry != (NUM_TX_DESC - 1)) { 646 tpc->TxDescArray[entry].status = 647 cpu_to_le32((OWNbit | FSbit | LSbit) | 648 ((len > ETH_ZLEN) ? len : ETH_ZLEN)); 649 } else { 650 tpc->TxDescArray[entry].status = 651 cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | 652 ((len > ETH_ZLEN) ? len : ETH_ZLEN)); 653 } 654 rtl_flush_tx_desc(&tpc->TxDescArray[entry]); 655 RTL_W8(TxPoll, 0x40); /* set polling bit */ 656 657 tpc->cur_tx++; 658 to = currticks() + TX_TIMEOUT; 659 do { 660 rtl_inval_tx_desc(&tpc->TxDescArray[entry]); 661 } while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) 662 && (currticks() < to)); /* wait */ 663 664 if (currticks() >= to) { 665 #ifdef DEBUG_RTL8169_TX 666 puts("tx timeout/error\n"); 667 printf("%s elapsed time : %lu\n", __func__, currticks()-stime); 668 #endif 669 ret = 0; 670 } else { 671 #ifdef DEBUG_RTL8169_TX 672 puts("tx done\n"); 673 #endif 674 ret = length; 675 } 676 /* Delay to make net console (nc) work properly */ 677 udelay(20); 678 return ret; 679 } 680 681 #ifdef CONFIG_DM_ETH 682 int rtl8169_eth_send(struct udevice *dev, void *packet, int length) 683 { 684 struct rtl8169_private *priv = dev_get_priv(dev); 685 686 return rtl_send_common(dev, priv->iobase, packet, length); 687 } 688 689 #else 690 static int rtl_send(struct eth_device *dev, void *packet, int length) 691 { 692 return rtl_send_common((pci_dev_t)(unsigned long)dev->priv, 693 dev->iobase, packet, length); 694 } 695 #endif 696 697 static void rtl8169_set_rx_mode(void) 698 { 699 u32 mc_filter[2]; /* Multicast hash filter */ 700 int rx_mode; 701 u32 tmp = 0; 702 703 #ifdef DEBUG_RTL8169 704 printf ("%s\n", __FUNCTION__); 705 #endif 706 707 /* IFF_ALLMULTI */ 708 /* Too many to filter perfectly -- accept all multicasts. */ 709 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; 710 mc_filter[1] = mc_filter[0] = 0xffffffff; 711 712 tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) & 713 rtl_chip_info[tpc->chipset].RxConfigMask); 714 715 RTL_W32(RxConfig, tmp); 716 RTL_W32(MAR0 + 0, mc_filter[0]); 717 RTL_W32(MAR0 + 4, mc_filter[1]); 718 } 719 720 #ifdef CONFIG_DM_ETH 721 static void rtl8169_hw_start(struct udevice *dev) 722 #else 723 static void rtl8169_hw_start(pci_dev_t dev) 724 #endif 725 { 726 u32 i; 727 728 #ifdef DEBUG_RTL8169 729 int stime = currticks(); 730 printf ("%s\n", __FUNCTION__); 731 #endif 732 733 #if 0 734 /* Soft reset the chip. */ 735 RTL_W8(ChipCmd, CmdReset); 736 737 /* Check that the chip has finished the reset. */ 738 for (i = 1000; i > 0; i--) { 739 if ((RTL_R8(ChipCmd) & CmdReset) == 0) 740 break; 741 else 742 udelay(10); 743 } 744 #endif 745 746 RTL_W8(Cfg9346, Cfg9346_Unlock); 747 748 /* RTL-8169sb/8110sb or previous version */ 749 if (tpc->chipset <= 5) 750 RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); 751 752 RTL_W8(EarlyTxThres, EarlyTxThld); 753 754 /* For gigabit rtl8169 */ 755 RTL_W16(RxMaxSize, RxPacketMaxSize); 756 757 /* Set Rx Config register */ 758 i = rtl8169_rx_config | (RTL_R32(RxConfig) & 759 rtl_chip_info[tpc->chipset].RxConfigMask); 760 RTL_W32(RxConfig, i); 761 762 /* Set DMA burst size and Interframe Gap Time */ 763 RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) | 764 (InterFrameGap << TxInterFrameGapShift)); 765 766 767 tpc->cur_rx = 0; 768 769 #ifdef CONFIG_DM_ETH 770 RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev, 771 (pci_addr_t)(unsigned long)tpc->TxDescArray)); 772 #else 773 RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev, 774 (pci_addr_t)(unsigned long)tpc->TxDescArray)); 775 #endif 776 RTL_W32(TxDescStartAddrHigh, (unsigned long)0); 777 #ifdef CONFIG_DM_ETH 778 RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys( 779 dev, (pci_addr_t)(unsigned long)tpc->RxDescArray)); 780 #else 781 RTL_W32(RxDescStartAddrLow, pci_mem_to_phys( 782 dev, (pci_addr_t)(unsigned long)tpc->RxDescArray)); 783 #endif 784 RTL_W32(RxDescStartAddrHigh, (unsigned long)0); 785 786 /* RTL-8169sc/8110sc or later version */ 787 if (tpc->chipset > 5) 788 RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); 789 790 RTL_W8(Cfg9346, Cfg9346_Lock); 791 udelay(10); 792 793 RTL_W32(RxMissed, 0); 794 795 rtl8169_set_rx_mode(); 796 797 /* no early-rx interrupts */ 798 RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); 799 800 #ifdef DEBUG_RTL8169 801 printf("%s elapsed time : %lu\n", __func__, currticks()-stime); 802 #endif 803 } 804 805 #ifdef CONFIG_DM_ETH 806 static void rtl8169_init_ring(struct udevice *dev) 807 #else 808 static void rtl8169_init_ring(pci_dev_t dev) 809 #endif 810 { 811 int i; 812 813 #ifdef DEBUG_RTL8169 814 int stime = currticks(); 815 printf ("%s\n", __FUNCTION__); 816 #endif 817 818 tpc->cur_rx = 0; 819 tpc->cur_tx = 0; 820 tpc->dirty_tx = 0; 821 memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc)); 822 memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc)); 823 824 for (i = 0; i < NUM_TX_DESC; i++) { 825 tpc->Tx_skbuff[i] = &txb[i]; 826 } 827 828 for (i = 0; i < NUM_RX_DESC; i++) { 829 if (i == (NUM_RX_DESC - 1)) 830 tpc->RxDescArray[i].status = 831 cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); 832 else 833 tpc->RxDescArray[i].status = 834 cpu_to_le32(OWNbit + RX_BUF_SIZE); 835 836 tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; 837 #ifdef CONFIG_DM_ETH 838 tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys( 839 dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i])); 840 #else 841 tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys( 842 dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i])); 843 #endif 844 rtl_flush_rx_desc(&tpc->RxDescArray[i]); 845 } 846 847 #ifdef DEBUG_RTL8169 848 printf("%s elapsed time : %lu\n", __func__, currticks()-stime); 849 #endif 850 } 851 852 #ifdef CONFIG_DM_ETH 853 static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr) 854 #else 855 static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr) 856 #endif 857 { 858 int i; 859 860 #ifdef DEBUG_RTL8169 861 int stime = currticks(); 862 printf ("%s\n", __FUNCTION__); 863 #endif 864 865 rtl8169_init_ring(dev); 866 rtl8169_hw_start(dev); 867 /* Construct a perfect filter frame with the mac address as first match 868 * and broadcast for all others */ 869 for (i = 0; i < 192; i++) 870 txb[i] = 0xFF; 871 872 txb[0] = enetaddr[0]; 873 txb[1] = enetaddr[1]; 874 txb[2] = enetaddr[2]; 875 txb[3] = enetaddr[3]; 876 txb[4] = enetaddr[4]; 877 txb[5] = enetaddr[5]; 878 879 #ifdef DEBUG_RTL8169 880 printf("%s elapsed time : %lu\n", __func__, currticks()-stime); 881 #endif 882 } 883 884 #ifdef CONFIG_DM_ETH 885 static int rtl8169_eth_start(struct udevice *dev) 886 { 887 struct eth_pdata *plat = dev_get_platdata(dev); 888 889 rtl8169_common_start(dev, plat->enetaddr); 890 891 return 0; 892 } 893 #else 894 /************************************************************************** 895 RESET - Finish setting up the ethernet interface 896 ***************************************************************************/ 897 static int rtl_reset(struct eth_device *dev, bd_t *bis) 898 { 899 rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv, 900 dev->enetaddr); 901 902 return 0; 903 } 904 #endif /* nCONFIG_DM_ETH */ 905 906 static void rtl_halt_common(unsigned long dev_iobase) 907 { 908 int i; 909 910 #ifdef DEBUG_RTL8169 911 printf ("%s\n", __FUNCTION__); 912 #endif 913 914 ioaddr = dev_iobase; 915 916 /* Stop the chip's Tx and Rx DMA processes. */ 917 RTL_W8(ChipCmd, 0x00); 918 919 /* Disable interrupts by clearing the interrupt mask. */ 920 RTL_W16(IntrMask, 0x0000); 921 922 RTL_W32(RxMissed, 0); 923 924 for (i = 0; i < NUM_RX_DESC; i++) { 925 tpc->RxBufferRing[i] = NULL; 926 } 927 } 928 929 #ifdef CONFIG_DM_ETH 930 void rtl8169_eth_stop(struct udevice *dev) 931 { 932 struct rtl8169_private *priv = dev_get_priv(dev); 933 934 rtl_halt_common(priv->iobase); 935 } 936 #else 937 /************************************************************************** 938 HALT - Turn off ethernet interface 939 ***************************************************************************/ 940 static void rtl_halt(struct eth_device *dev) 941 { 942 rtl_halt_common(dev->iobase); 943 } 944 #endif 945 946 /************************************************************************** 947 INIT - Look for an adapter, this routine's visible to the outside 948 ***************************************************************************/ 949 950 #define board_found 1 951 #define valid_link 0 952 static int rtl_init(unsigned long dev_ioaddr, const char *name, 953 unsigned char *enetaddr) 954 { 955 static int board_idx = -1; 956 int i, rc; 957 int option = -1, Cap10_100 = 0, Cap1000 = 0; 958 959 #ifdef DEBUG_RTL8169 960 printf ("%s\n", __FUNCTION__); 961 #endif 962 ioaddr = dev_ioaddr; 963 964 board_idx++; 965 966 /* point to private storage */ 967 tpc = &tpx; 968 969 rc = rtl8169_init_board(ioaddr, name); 970 if (rc) 971 return rc; 972 973 /* Get MAC address. FIXME: read EEPROM */ 974 for (i = 0; i < MAC_ADDR_LEN; i++) 975 enetaddr[i] = RTL_R8(MAC0 + i); 976 977 #ifdef DEBUG_RTL8169 978 printf("chipset = %d\n", tpc->chipset); 979 printf("MAC Address"); 980 for (i = 0; i < MAC_ADDR_LEN; i++) 981 printf(":%02x", enetaddr[i]); 982 putc('\n'); 983 #endif 984 985 #ifdef DEBUG_RTL8169 986 /* Print out some hardware info */ 987 printf("%s: at ioaddr 0x%lx\n", name, ioaddr); 988 #endif 989 990 /* if TBI is not endbled */ 991 if (!(RTL_R8(PHYstatus) & TBI_Enable)) { 992 int val = mdio_read(PHY_AUTO_NEGO_REG); 993 994 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; 995 /* Force RTL8169 in 10/100/1000 Full/Half mode. */ 996 if (option > 0) { 997 #ifdef DEBUG_RTL8169 998 printf("%s: Force-mode Enabled.\n", name); 999 #endif 1000 Cap10_100 = 0, Cap1000 = 0; 1001 switch (option) { 1002 case _10_Half: 1003 Cap10_100 = PHY_Cap_10_Half; 1004 Cap1000 = PHY_Cap_Null; 1005 break; 1006 case _10_Full: 1007 Cap10_100 = PHY_Cap_10_Full; 1008 Cap1000 = PHY_Cap_Null; 1009 break; 1010 case _100_Half: 1011 Cap10_100 = PHY_Cap_100_Half; 1012 Cap1000 = PHY_Cap_Null; 1013 break; 1014 case _100_Full: 1015 Cap10_100 = PHY_Cap_100_Full; 1016 Cap1000 = PHY_Cap_Null; 1017 break; 1018 case _1000_Full: 1019 Cap10_100 = PHY_Cap_Null; 1020 Cap1000 = PHY_Cap_1000_Full; 1021 break; 1022 default: 1023 break; 1024 } 1025 mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F)); /* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */ 1026 mdio_write(PHY_1000_CTRL_REG, Cap1000); 1027 } else { 1028 #ifdef DEBUG_RTL8169 1029 printf("%s: Auto-negotiation Enabled.\n", 1030 name); 1031 #endif 1032 /* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */ 1033 mdio_write(PHY_AUTO_NEGO_REG, 1034 PHY_Cap_10_Half | PHY_Cap_10_Full | 1035 PHY_Cap_100_Half | PHY_Cap_100_Full | 1036 (val & 0x1F)); 1037 1038 /* enable 1000 Full Mode */ 1039 mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full); 1040 1041 } 1042 1043 /* Enable auto-negotiation and restart auto-nigotiation */ 1044 mdio_write(PHY_CTRL_REG, 1045 PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego); 1046 udelay(100); 1047 1048 /* wait for auto-negotiation process */ 1049 for (i = 10000; i > 0; i--) { 1050 /* check if auto-negotiation complete */ 1051 if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) { 1052 udelay(100); 1053 option = RTL_R8(PHYstatus); 1054 if (option & _1000bpsF) { 1055 #ifdef DEBUG_RTL8169 1056 printf("%s: 1000Mbps Full-duplex operation.\n", 1057 name); 1058 #endif 1059 } else { 1060 #ifdef DEBUG_RTL8169 1061 printf("%s: %sMbps %s-duplex operation.\n", 1062 name, 1063 (option & _100bps) ? "100" : 1064 "10", 1065 (option & FullDup) ? "Full" : 1066 "Half"); 1067 #endif 1068 } 1069 break; 1070 } else { 1071 udelay(100); 1072 } 1073 } /* end for-loop to wait for auto-negotiation process */ 1074 1075 } else { 1076 udelay(100); 1077 #ifdef DEBUG_RTL8169 1078 printf 1079 ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n", 1080 name, 1081 (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed"); 1082 #endif 1083 } 1084 1085 1086 tpc->RxDescArray = rtl_alloc_descs(NUM_RX_DESC); 1087 if (!tpc->RxDescArray) 1088 return -ENOMEM; 1089 1090 tpc->TxDescArray = rtl_alloc_descs(NUM_TX_DESC); 1091 if (!tpc->TxDescArray) 1092 return -ENOMEM; 1093 1094 return 0; 1095 } 1096 1097 #ifndef CONFIG_DM_ETH 1098 int rtl8169_initialize(bd_t *bis) 1099 { 1100 pci_dev_t devno; 1101 int card_number = 0; 1102 struct eth_device *dev; 1103 u32 iobase; 1104 int idx=0; 1105 1106 while(1){ 1107 unsigned int region; 1108 u16 device; 1109 int err; 1110 1111 /* Find RTL8169 */ 1112 if ((devno = pci_find_devices(supported, idx++)) < 0) 1113 break; 1114 1115 pci_read_config_word(devno, PCI_DEVICE_ID, &device); 1116 switch (device) { 1117 case 0x8168: 1118 region = 2; 1119 break; 1120 1121 default: 1122 region = 1; 1123 break; 1124 } 1125 1126 pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase); 1127 iobase &= ~0xf; 1128 1129 debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); 1130 1131 dev = (struct eth_device *)malloc(sizeof *dev); 1132 if (!dev) { 1133 printf("Can not allocate memory of rtl8169\n"); 1134 break; 1135 } 1136 1137 memset(dev, 0, sizeof(*dev)); 1138 sprintf (dev->name, "RTL8169#%d", card_number); 1139 1140 dev->priv = (void *)(unsigned long)devno; 1141 dev->iobase = (int)pci_mem_to_phys(devno, iobase); 1142 1143 dev->init = rtl_reset; 1144 dev->halt = rtl_halt; 1145 dev->send = rtl_send; 1146 dev->recv = rtl_recv; 1147 1148 err = rtl_init(dev->iobase, dev->name, dev->enetaddr); 1149 if (err < 0) { 1150 printf(pr_fmt("failed to initialize card: %d\n"), err); 1151 free(dev); 1152 continue; 1153 } 1154 1155 eth_register (dev); 1156 1157 card_number++; 1158 } 1159 return card_number; 1160 } 1161 #endif 1162 1163 #ifdef CONFIG_DM_ETH 1164 static int rtl8169_eth_probe(struct udevice *dev) 1165 { 1166 struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); 1167 struct rtl8169_private *priv = dev_get_priv(dev); 1168 struct eth_pdata *plat = dev_get_platdata(dev); 1169 u32 iobase; 1170 int region; 1171 int ret; 1172 1173 debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); 1174 switch (pplat->device) { 1175 case 0x8168: 1176 region = 2; 1177 break; 1178 default: 1179 region = 1; 1180 break; 1181 } 1182 dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase); 1183 iobase &= ~0xf; 1184 priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase); 1185 1186 ret = rtl_init(priv->iobase, dev->name, plat->enetaddr); 1187 if (ret < 0) { 1188 printf(pr_fmt("failed to initialize card: %d\n"), ret); 1189 return ret; 1190 } 1191 1192 return 0; 1193 } 1194 1195 static const struct eth_ops rtl8169_eth_ops = { 1196 .start = rtl8169_eth_start, 1197 .send = rtl8169_eth_send, 1198 .recv = rtl8169_eth_recv, 1199 .stop = rtl8169_eth_stop, 1200 }; 1201 1202 static const struct udevice_id rtl8169_eth_ids[] = { 1203 { .compatible = "realtek,rtl8169" }, 1204 { } 1205 }; 1206 1207 U_BOOT_DRIVER(eth_rtl8169) = { 1208 .name = "eth_rtl8169", 1209 .id = UCLASS_ETH, 1210 .of_match = rtl8169_eth_ids, 1211 .probe = rtl8169_eth_probe, 1212 .ops = &rtl8169_eth_ops, 1213 .priv_auto_alloc_size = sizeof(struct rtl8169_private), 1214 .platdata_auto_alloc_size = sizeof(struct eth_pdata), 1215 }; 1216 1217 U_BOOT_PCI_DEVICE(eth_rtl8169, supported); 1218 #endif 1219