xref: /openbmc/u-boot/drivers/net/phy/vitesse.c (revision 8aa42441)
1 /*
2  * Vitesse PHY drivers
3  *
4  * Copyright 2010-2012 Freescale Semiconductor, Inc.
5  * Author: Andy Fleming
6  * Add vsc8662 phy support - Priyanka Jain
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 #include <miiphy.h>
10 
11 /* Cicada Auxiliary Control/Status Register */
12 #define MIIM_CIS82xx_AUX_CONSTAT	0x1c
13 #define MIIM_CIS82xx_AUXCONSTAT_INIT	0x0004
14 #define MIIM_CIS82xx_AUXCONSTAT_DUPLEX	0x0020
15 #define MIIM_CIS82xx_AUXCONSTAT_SPEED	0x0018
16 #define MIIM_CIS82xx_AUXCONSTAT_GBIT	0x0010
17 #define MIIM_CIS82xx_AUXCONSTAT_100	0x0008
18 
19 /* Cicada Extended Control Register 1 */
20 #define MIIM_CIS82xx_EXT_CON1		0x17
21 #define MIIM_CIS8201_EXTCON1_INIT	0x0000
22 
23 /* Cicada 8204 Extended PHY Control Register 1 */
24 #define MIIM_CIS8204_EPHY_CON		0x17
25 #define MIIM_CIS8204_EPHYCON_INIT	0x0006
26 #define MIIM_CIS8204_EPHYCON_RGMII	0x1100
27 
28 /* Cicada 8204 Serial LED Control Register */
29 #define MIIM_CIS8204_SLED_CON		0x1b
30 #define MIIM_CIS8204_SLEDCON_INIT	0x1115
31 
32 /* Vitesse VSC8601 Extended PHY Control Register 1 */
33 #define MIIM_VSC8601_EPHY_CON		0x17
34 #define MIIM_VSC8601_EPHY_CON_INIT_SKEW	0x1120
35 #define MIIM_VSC8601_SKEW_CTRL		0x1c
36 
37 #define PHY_EXT_PAGE_ACCESS    0x1f
38 #define PHY_EXT_PAGE_ACCESS_GENERAL	0x10
39 #define PHY_EXT_PAGE_ACCESS_EXTENDED3	0x3
40 
41 /* Vitesse VSC8574 control register */
42 #define MIIM_VSC8574_MAC_SERDES_CON	0x10
43 #define MIIM_VSC8574_MAC_SERDES_ANEG	0x80
44 #define MIIM_VSC8574_GENERAL18		0x12
45 #define MIIM_VSC8574_GENERAL19		0x13
46 
47 /* Vitesse VSC8574 gerenal purpose register 18 */
48 #define MIIM_VSC8574_18G_SGMII		0x80f0
49 #define MIIM_VSC8574_18G_QSGMII		0x80e0
50 #define MIIM_VSC8574_18G_CMDSTAT	0x8000
51 
52 /* Vitesse VSC8514 control register */
53 #define MIIM_VSC8514_GENERAL18		0x12
54 #define MIIM_VSC8514_GENERAL19		0x13
55 #define MIIM_VSC8514_GENERAL23		0x17
56 
57 /* Vitesse VSC8514 gerenal purpose register 18 */
58 #define MIIM_VSC8514_18G_QSGMII		0x80e0
59 #define MIIM_VSC8514_18G_CMDSTAT	0x8000
60 
61 /* CIS8201 */
62 static int vitesse_config(struct phy_device *phydev)
63 {
64 	/* Override PHY config settings */
65 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
66 			MIIM_CIS82xx_AUXCONSTAT_INIT);
67 	/* Set up the interface mode */
68 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
69 			MIIM_CIS8201_EXTCON1_INIT);
70 
71 	genphy_config_aneg(phydev);
72 
73 	return 0;
74 }
75 
76 static int vitesse_parse_status(struct phy_device *phydev)
77 {
78 	int speed;
79 	int mii_reg;
80 
81 	mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
82 
83 	if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
84 		phydev->duplex = DUPLEX_FULL;
85 	else
86 		phydev->duplex = DUPLEX_HALF;
87 
88 	speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
89 	switch (speed) {
90 	case MIIM_CIS82xx_AUXCONSTAT_GBIT:
91 		phydev->speed = SPEED_1000;
92 		break;
93 	case MIIM_CIS82xx_AUXCONSTAT_100:
94 		phydev->speed = SPEED_100;
95 		break;
96 	default:
97 		phydev->speed = SPEED_10;
98 		break;
99 	}
100 
101 	return 0;
102 }
103 
104 static int vitesse_startup(struct phy_device *phydev)
105 {
106 	genphy_update_link(phydev);
107 	vitesse_parse_status(phydev);
108 
109 	return 0;
110 }
111 
112 static int cis8204_config(struct phy_device *phydev)
113 {
114 	/* Override PHY config settings */
115 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
116 			MIIM_CIS82xx_AUXCONSTAT_INIT);
117 
118 	genphy_config_aneg(phydev);
119 
120 	if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
121 			(phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
122 			(phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
123 			(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
124 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
125 				MIIM_CIS8204_EPHYCON_INIT |
126 				MIIM_CIS8204_EPHYCON_RGMII);
127 	else
128 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
129 				MIIM_CIS8204_EPHYCON_INIT);
130 
131 	return 0;
132 }
133 
134 /* Vitesse VSC8601 */
135 static int vsc8601_config(struct phy_device *phydev)
136 {
137 	/* Configure some basic stuff */
138 #ifdef CONFIG_SYS_VSC8601_SKEWFIX
139 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON,
140 			MIIM_VSC8601_EPHY_CON_INIT_SKEW);
141 #if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
142 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1);
143 #define VSC8101_SKEW \
144 	((CONFIG_SYS_VSC8601_SKEW_TX << 14) \
145 	| (CONFIG_SYS_VSC8601_SKEW_RX << 12))
146 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL,
147 			VSC8101_SKEW);
148 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
149 #endif
150 #endif
151 
152 	genphy_config_aneg(phydev);
153 
154 	return 0;
155 }
156 
157 static int vsc8574_config(struct phy_device *phydev)
158 {
159 	u32 val;
160 	/* configure register 19G for MAC */
161 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
162 		  PHY_EXT_PAGE_ACCESS_GENERAL);
163 
164 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
165 	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
166 		/* set bit 15:14 to '01' for QSGMII mode */
167 		val = (val & 0x3fff) | (1 << 14);
168 		phy_write(phydev, MDIO_DEVAD_NONE,
169 			  MIIM_VSC8574_GENERAL19, val);
170 		/* Enable 4 ports MAC QSGMII */
171 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
172 			  MIIM_VSC8574_18G_QSGMII);
173 	} else {
174 		/* set bit 15:14 to '00' for SGMII mode */
175 		val = val & 0x3fff;
176 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
177 		/* Enable 4 ports MAC SGMII */
178 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
179 			  MIIM_VSC8574_18G_SGMII);
180 	}
181 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
182 	/* When bit 15 is cleared the command has completed */
183 	while (val & MIIM_VSC8574_18G_CMDSTAT)
184 		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
185 
186 	/* Enable Serdes Auto-negotiation */
187 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
188 		  PHY_EXT_PAGE_ACCESS_EXTENDED3);
189 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
190 	val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
191 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
192 
193 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
194 
195 	genphy_config_aneg(phydev);
196 
197 	return 0;
198 }
199 
200 static int vsc8514_config(struct phy_device *phydev)
201 {
202 	u32 val;
203 	int timeout = 1000000;
204 
205 	/* configure register to access 19G */
206 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
207 		  PHY_EXT_PAGE_ACCESS_GENERAL);
208 
209 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
210 	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
211 		/* set bit 15:14 to '01' for QSGMII mode */
212 		val = (val & 0x3fff) | (1 << 14);
213 		phy_write(phydev, MDIO_DEVAD_NONE,
214 			  MIIM_VSC8514_GENERAL19, val);
215 		/* Enable 4 ports MAC QSGMII */
216 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
217 			  MIIM_VSC8514_18G_QSGMII);
218 	} else {
219 		/*TODO Add SGMII functionality once spec sheet
220 		 * for VSC8514 defines complete functionality
221 		 */
222 	}
223 
224 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
225 	/* When bit 15 is cleared the command has completed */
226 	while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
227 		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
228 
229 	if (0 == timeout) {
230 		printf("PHY 8514 config failed\n");
231 		return -1;
232 	}
233 
234 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
235 
236 	/* configure register to access 23 */
237 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
238 	/* set bits 10:8 to '000' */
239 	val = (val & 0xf8ff);
240 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
241 
242 	genphy_config_aneg(phydev);
243 
244 	return 0;
245 }
246 
247 static struct phy_driver VSC8211_driver = {
248 	.name	= "Vitesse VSC8211",
249 	.uid	= 0xfc4b0,
250 	.mask	= 0xffff0,
251 	.features = PHY_GBIT_FEATURES,
252 	.config = &vitesse_config,
253 	.startup = &vitesse_startup,
254 	.shutdown = &genphy_shutdown,
255 };
256 
257 static struct phy_driver VSC8221_driver = {
258 	.name = "Vitesse VSC8221",
259 	.uid = 0xfc550,
260 	.mask = 0xffff0,
261 	.features = PHY_GBIT_FEATURES,
262 	.config = &genphy_config_aneg,
263 	.startup = &vitesse_startup,
264 	.shutdown = &genphy_shutdown,
265 };
266 
267 static struct phy_driver VSC8244_driver = {
268 	.name = "Vitesse VSC8244",
269 	.uid = 0xfc6c0,
270 	.mask = 0xffff0,
271 	.features = PHY_GBIT_FEATURES,
272 	.config = &genphy_config_aneg,
273 	.startup = &vitesse_startup,
274 	.shutdown = &genphy_shutdown,
275 };
276 
277 static struct phy_driver VSC8234_driver = {
278 	.name = "Vitesse VSC8234",
279 	.uid = 0xfc620,
280 	.mask = 0xffff0,
281 	.features = PHY_GBIT_FEATURES,
282 	.config = &genphy_config_aneg,
283 	.startup = &vitesse_startup,
284 	.shutdown = &genphy_shutdown,
285 };
286 
287 static struct phy_driver VSC8574_driver = {
288 	.name = "Vitesse VSC8574",
289 	.uid = 0x704a0,
290 	.mask = 0xffff0,
291 	.features = PHY_GBIT_FEATURES,
292 	.config = &vsc8574_config,
293 	.startup = &vitesse_startup,
294 	.shutdown = &genphy_shutdown,
295 };
296 
297 static struct phy_driver VSC8514_driver = {
298 	.name = "Vitesse VSC8514",
299 	.uid = 0x70570,
300 	.mask = 0xffff0,
301 	.features = PHY_GBIT_FEATURES,
302 	.config = &vsc8514_config,
303 	.startup = &vitesse_startup,
304 	.shutdown = &genphy_shutdown,
305 };
306 
307 static struct phy_driver VSC8601_driver = {
308 	.name = "Vitesse VSC8601",
309 	.uid = 0x70420,
310 	.mask = 0xffff0,
311 	.features = PHY_GBIT_FEATURES,
312 	.config = &vsc8601_config,
313 	.startup = &vitesse_startup,
314 	.shutdown = &genphy_shutdown,
315 };
316 
317 static struct phy_driver VSC8641_driver = {
318 	.name = "Vitesse VSC8641",
319 	.uid = 0x70430,
320 	.mask = 0xffff0,
321 	.features = PHY_GBIT_FEATURES,
322 	.config = &genphy_config_aneg,
323 	.startup = &vitesse_startup,
324 	.shutdown = &genphy_shutdown,
325 };
326 
327 static struct phy_driver VSC8662_driver = {
328 	.name = "Vitesse VSC8662",
329 	.uid = 0x70660,
330 	.mask = 0xffff0,
331 	.features = PHY_GBIT_FEATURES,
332 	.config = &genphy_config_aneg,
333 	.startup = &vitesse_startup,
334 	.shutdown = &genphy_shutdown,
335 };
336 
337 /* Vitesse bought Cicada, so we'll put these here */
338 static struct phy_driver cis8201_driver = {
339 	.name = "CIS8201",
340 	.uid = 0xfc410,
341 	.mask = 0xffff0,
342 	.features = PHY_GBIT_FEATURES,
343 	.config = &vitesse_config,
344 	.startup = &vitesse_startup,
345 	.shutdown = &genphy_shutdown,
346 };
347 
348 static struct phy_driver cis8204_driver = {
349 	.name = "Cicada Cis8204",
350 	.uid = 0xfc440,
351 	.mask = 0xffff0,
352 	.features = PHY_GBIT_FEATURES,
353 	.config = &cis8204_config,
354 	.startup = &vitesse_startup,
355 	.shutdown = &genphy_shutdown,
356 };
357 
358 int phy_vitesse_init(void)
359 {
360 	phy_register(&VSC8641_driver);
361 	phy_register(&VSC8601_driver);
362 	phy_register(&VSC8234_driver);
363 	phy_register(&VSC8244_driver);
364 	phy_register(&VSC8211_driver);
365 	phy_register(&VSC8221_driver);
366 	phy_register(&VSC8574_driver);
367 	phy_register(&VSC8514_driver);
368 	phy_register(&VSC8662_driver);
369 	phy_register(&cis8201_driver);
370 	phy_register(&cis8204_driver);
371 
372 	return 0;
373 }
374