xref: /openbmc/u-boot/drivers/net/phy/vitesse.c (revision 1878804a)
1 /*
2  * Vitesse PHY drivers
3  *
4  * Copyright 2010-2014 Freescale Semiconductor, Inc.
5  * Original Author: Andy Fleming
6  * Add vsc8662 phy support - Priyanka Jain
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 #include <miiphy.h>
10 
11 /* Cicada Auxiliary Control/Status Register */
12 #define MIIM_CIS82xx_AUX_CONSTAT	0x1c
13 #define MIIM_CIS82xx_AUXCONSTAT_INIT	0x0004
14 #define MIIM_CIS82xx_AUXCONSTAT_DUPLEX	0x0020
15 #define MIIM_CIS82xx_AUXCONSTAT_SPEED	0x0018
16 #define MIIM_CIS82xx_AUXCONSTAT_GBIT	0x0010
17 #define MIIM_CIS82xx_AUXCONSTAT_100	0x0008
18 
19 /* Cicada Extended Control Register 1 */
20 #define MIIM_CIS82xx_EXT_CON1		0x17
21 #define MIIM_CIS8201_EXTCON1_INIT	0x0000
22 
23 /* Cicada 8204 Extended PHY Control Register 1 */
24 #define MIIM_CIS8204_EPHY_CON		0x17
25 #define MIIM_CIS8204_EPHYCON_INIT	0x0006
26 #define MIIM_CIS8204_EPHYCON_RGMII	0x1100
27 
28 /* Cicada 8204 Serial LED Control Register */
29 #define MIIM_CIS8204_SLED_CON		0x1b
30 #define MIIM_CIS8204_SLEDCON_INIT	0x1115
31 
32 /* Vitesse VSC8601 Extended PHY Control Register 1 */
33 #define MII_VSC8601_EPHY_CTL		0x17
34 #define MII_VSC8601_EPHY_CTL_RGMII_SKEW	(1 << 8)
35 
36 #define PHY_EXT_PAGE_ACCESS    0x1f
37 #define PHY_EXT_PAGE_ACCESS_GENERAL	0x10
38 #define PHY_EXT_PAGE_ACCESS_EXTENDED3	0x3
39 
40 /* Vitesse VSC8574 control register */
41 #define MIIM_VSC8574_MAC_SERDES_CON	0x10
42 #define MIIM_VSC8574_MAC_SERDES_ANEG	0x80
43 #define MIIM_VSC8574_GENERAL18		0x12
44 #define MIIM_VSC8574_GENERAL19		0x13
45 
46 /* Vitesse VSC8574 gerenal purpose register 18 */
47 #define MIIM_VSC8574_18G_SGMII		0x80f0
48 #define MIIM_VSC8574_18G_QSGMII		0x80e0
49 #define MIIM_VSC8574_18G_CMDSTAT	0x8000
50 
51 /* Vitesse VSC8514 control register */
52 #define MIIM_VSC8514_MAC_SERDES_CON     0x10
53 #define MIIM_VSC8514_GENERAL18		0x12
54 #define MIIM_VSC8514_GENERAL19		0x13
55 #define MIIM_VSC8514_GENERAL23		0x17
56 
57 /* Vitesse VSC8514 gerenal purpose register 18 */
58 #define MIIM_VSC8514_18G_QSGMII		0x80e0
59 #define MIIM_VSC8514_18G_CMDSTAT	0x8000
60 
61 /* Vitesse VSC8664 Control/Status Register */
62 #define MIIM_VSC8664_SERDES_AND_SIGDET	0x13
63 #define MIIM_VSC8664_ADDITIONAL_DEV	0x16
64 #define MIIM_VSC8664_EPHY_CON		0x17
65 #define MIIM_VSC8664_LED_CON		0x1E
66 
67 #define PHY_EXT_PAGE_ACCESS_EXTENDED	0x0001
68 
69 /* CIS8201 */
70 static int vitesse_config(struct phy_device *phydev)
71 {
72 	/* Override PHY config settings */
73 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
74 			MIIM_CIS82xx_AUXCONSTAT_INIT);
75 	/* Set up the interface mode */
76 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
77 			MIIM_CIS8201_EXTCON1_INIT);
78 
79 	genphy_config_aneg(phydev);
80 
81 	return 0;
82 }
83 
84 static int vitesse_parse_status(struct phy_device *phydev)
85 {
86 	int speed;
87 	int mii_reg;
88 
89 	mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
90 
91 	if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
92 		phydev->duplex = DUPLEX_FULL;
93 	else
94 		phydev->duplex = DUPLEX_HALF;
95 
96 	speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
97 	switch (speed) {
98 	case MIIM_CIS82xx_AUXCONSTAT_GBIT:
99 		phydev->speed = SPEED_1000;
100 		break;
101 	case MIIM_CIS82xx_AUXCONSTAT_100:
102 		phydev->speed = SPEED_100;
103 		break;
104 	default:
105 		phydev->speed = SPEED_10;
106 		break;
107 	}
108 
109 	return 0;
110 }
111 
112 static int vitesse_startup(struct phy_device *phydev)
113 {
114 	int ret;
115 
116 	ret = genphy_update_link(phydev);
117 	if (ret)
118 		return ret;
119 	return vitesse_parse_status(phydev);
120 }
121 
122 static int cis8204_config(struct phy_device *phydev)
123 {
124 	/* Override PHY config settings */
125 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
126 			MIIM_CIS82xx_AUXCONSTAT_INIT);
127 
128 	genphy_config_aneg(phydev);
129 
130 	if (phy_interface_is_rgmii(phydev))
131 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
132 				MIIM_CIS8204_EPHYCON_INIT |
133 				MIIM_CIS8204_EPHYCON_RGMII);
134 	else
135 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
136 				MIIM_CIS8204_EPHYCON_INIT);
137 
138 	return 0;
139 }
140 
141 /* Vitesse VSC8601 */
142 /* This adds a skew for both TX and RX clocks, so the skew should only be
143  * applied to "rgmii-id" interfaces. It may not work as expected
144  * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
145 static int vsc8601_add_skew(struct phy_device *phydev)
146 {
147 	int ret;
148 
149 	ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL);
150 	if (ret < 0)
151 		return ret;
152 
153 	ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
154 	return phy_write(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL, ret);
155 }
156 
157 static int vsc8601_config(struct phy_device *phydev)
158 {
159 	int ret = 0;
160 
161 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
162 		ret = vsc8601_add_skew(phydev);
163 
164 	if (ret < 0)
165 		return ret;
166 
167 	return genphy_config_aneg(phydev);
168 }
169 
170 static int vsc8574_config(struct phy_device *phydev)
171 {
172 	u32 val;
173 	/* configure register 19G for MAC */
174 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
175 		  PHY_EXT_PAGE_ACCESS_GENERAL);
176 
177 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
178 	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
179 		/* set bit 15:14 to '01' for QSGMII mode */
180 		val = (val & 0x3fff) | (1 << 14);
181 		phy_write(phydev, MDIO_DEVAD_NONE,
182 			  MIIM_VSC8574_GENERAL19, val);
183 		/* Enable 4 ports MAC QSGMII */
184 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
185 			  MIIM_VSC8574_18G_QSGMII);
186 	} else {
187 		/* set bit 15:14 to '00' for SGMII mode */
188 		val = val & 0x3fff;
189 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
190 		/* Enable 4 ports MAC SGMII */
191 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
192 			  MIIM_VSC8574_18G_SGMII);
193 	}
194 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
195 	/* When bit 15 is cleared the command has completed */
196 	while (val & MIIM_VSC8574_18G_CMDSTAT)
197 		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
198 
199 	/* Enable Serdes Auto-negotiation */
200 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
201 		  PHY_EXT_PAGE_ACCESS_EXTENDED3);
202 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
203 	val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
204 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
205 
206 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
207 
208 	genphy_config_aneg(phydev);
209 
210 	return 0;
211 }
212 
213 static int vsc8514_config(struct phy_device *phydev)
214 {
215 	u32 val;
216 	int timeout = 1000000;
217 
218 	/* configure register to access 19G */
219 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
220 		  PHY_EXT_PAGE_ACCESS_GENERAL);
221 
222 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
223 	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
224 		/* set bit 15:14 to '01' for QSGMII mode */
225 		val = (val & 0x3fff) | (1 << 14);
226 		phy_write(phydev, MDIO_DEVAD_NONE,
227 			  MIIM_VSC8514_GENERAL19, val);
228 		/* Enable 4 ports MAC QSGMII */
229 		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
230 			  MIIM_VSC8514_18G_QSGMII);
231 	} else {
232 		/*TODO Add SGMII functionality once spec sheet
233 		 * for VSC8514 defines complete functionality
234 		 */
235 	}
236 
237 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
238 	/* When bit 15 is cleared the command has completed */
239 	while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
240 		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
241 
242 	if (0 == timeout) {
243 		printf("PHY 8514 config failed\n");
244 		return -1;
245 	}
246 
247 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
248 
249 	/* configure register to access 23 */
250 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
251 	/* set bits 10:8 to '000' */
252 	val = (val & 0xf8ff);
253 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
254 
255 	/* Enable Serdes Auto-negotiation */
256 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
257 		  PHY_EXT_PAGE_ACCESS_EXTENDED3);
258 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON);
259 	val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
260 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON, val);
261 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
262 
263 	genphy_config_aneg(phydev);
264 
265 	return 0;
266 }
267 
268 static int vsc8664_config(struct phy_device *phydev)
269 {
270 	u32 val;
271 
272 	/* Enable MAC interface auto-negotiation */
273 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
274 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON);
275 	val |= (1 << 13);
276 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val);
277 
278 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
279 		  PHY_EXT_PAGE_ACCESS_EXTENDED);
280 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET);
281 	val |= (1 << 11);
282 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val);
283 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
284 
285 	/* Enable LED blink */
286 	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON);
287 	val &= ~(1 << 2);
288 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val);
289 
290 	genphy_config_aneg(phydev);
291 
292 	return 0;
293 }
294 
295 static struct phy_driver VSC8211_driver = {
296 	.name	= "Vitesse VSC8211",
297 	.uid	= 0xfc4b0,
298 	.mask	= 0xffff0,
299 	.features = PHY_GBIT_FEATURES,
300 	.config = &vitesse_config,
301 	.startup = &vitesse_startup,
302 	.shutdown = &genphy_shutdown,
303 };
304 
305 static struct phy_driver VSC8221_driver = {
306 	.name = "Vitesse VSC8221",
307 	.uid = 0xfc550,
308 	.mask = 0xffff0,
309 	.features = PHY_GBIT_FEATURES,
310 	.config = &genphy_config_aneg,
311 	.startup = &vitesse_startup,
312 	.shutdown = &genphy_shutdown,
313 };
314 
315 static struct phy_driver VSC8244_driver = {
316 	.name = "Vitesse VSC8244",
317 	.uid = 0xfc6c0,
318 	.mask = 0xffff0,
319 	.features = PHY_GBIT_FEATURES,
320 	.config = &genphy_config_aneg,
321 	.startup = &vitesse_startup,
322 	.shutdown = &genphy_shutdown,
323 };
324 
325 static struct phy_driver VSC8234_driver = {
326 	.name = "Vitesse VSC8234",
327 	.uid = 0xfc620,
328 	.mask = 0xffff0,
329 	.features = PHY_GBIT_FEATURES,
330 	.config = &genphy_config_aneg,
331 	.startup = &vitesse_startup,
332 	.shutdown = &genphy_shutdown,
333 };
334 
335 static struct phy_driver VSC8574_driver = {
336 	.name = "Vitesse VSC8574",
337 	.uid = 0x704a0,
338 	.mask = 0xffff0,
339 	.features = PHY_GBIT_FEATURES,
340 	.config = &vsc8574_config,
341 	.startup = &vitesse_startup,
342 	.shutdown = &genphy_shutdown,
343 };
344 
345 static struct phy_driver VSC8514_driver = {
346 	.name = "Vitesse VSC8514",
347 	.uid = 0x70670,
348 	.mask = 0xffff0,
349 	.features = PHY_GBIT_FEATURES,
350 	.config = &vsc8514_config,
351 	.startup = &vitesse_startup,
352 	.shutdown = &genphy_shutdown,
353 };
354 
355 static struct phy_driver VSC8584_driver = {
356 	.name = "Vitesse VSC8584",
357 	.uid = 0x707c0,
358 	.mask = 0xffff0,
359 	.features = PHY_GBIT_FEATURES,
360 	.config = &vsc8574_config,
361 	.startup = &vitesse_startup,
362 	.shutdown = &genphy_shutdown,
363 };
364 
365 static struct phy_driver VSC8601_driver = {
366 	.name = "Vitesse VSC8601",
367 	.uid = 0x70420,
368 	.mask = 0xffff0,
369 	.features = PHY_GBIT_FEATURES,
370 	.config = &vsc8601_config,
371 	.startup = &vitesse_startup,
372 	.shutdown = &genphy_shutdown,
373 };
374 
375 static struct phy_driver VSC8641_driver = {
376 	.name = "Vitesse VSC8641",
377 	.uid = 0x70430,
378 	.mask = 0xffff0,
379 	.features = PHY_GBIT_FEATURES,
380 	.config = &genphy_config_aneg,
381 	.startup = &vitesse_startup,
382 	.shutdown = &genphy_shutdown,
383 };
384 
385 static struct phy_driver VSC8662_driver = {
386 	.name = "Vitesse VSC8662",
387 	.uid = 0x70660,
388 	.mask = 0xffff0,
389 	.features = PHY_GBIT_FEATURES,
390 	.config = &genphy_config_aneg,
391 	.startup = &vitesse_startup,
392 	.shutdown = &genphy_shutdown,
393 };
394 
395 static struct phy_driver VSC8664_driver = {
396 	.name = "Vitesse VSC8664",
397 	.uid = 0x70660,
398 	.mask = 0xffff0,
399 	.features = PHY_GBIT_FEATURES,
400 	.config = &vsc8664_config,
401 	.startup = &vitesse_startup,
402 	.shutdown = &genphy_shutdown,
403 };
404 
405 /* Vitesse bought Cicada, so we'll put these here */
406 static struct phy_driver cis8201_driver = {
407 	.name = "CIS8201",
408 	.uid = 0xfc410,
409 	.mask = 0xffff0,
410 	.features = PHY_GBIT_FEATURES,
411 	.config = &vitesse_config,
412 	.startup = &vitesse_startup,
413 	.shutdown = &genphy_shutdown,
414 };
415 
416 static struct phy_driver cis8204_driver = {
417 	.name = "Cicada Cis8204",
418 	.uid = 0xfc440,
419 	.mask = 0xffff0,
420 	.features = PHY_GBIT_FEATURES,
421 	.config = &cis8204_config,
422 	.startup = &vitesse_startup,
423 	.shutdown = &genphy_shutdown,
424 };
425 
426 int phy_vitesse_init(void)
427 {
428 	phy_register(&VSC8641_driver);
429 	phy_register(&VSC8601_driver);
430 	phy_register(&VSC8234_driver);
431 	phy_register(&VSC8244_driver);
432 	phy_register(&VSC8211_driver);
433 	phy_register(&VSC8221_driver);
434 	phy_register(&VSC8574_driver);
435 	phy_register(&VSC8584_driver);
436 	phy_register(&VSC8514_driver);
437 	phy_register(&VSC8662_driver);
438 	phy_register(&VSC8664_driver);
439 	phy_register(&cis8201_driver);
440 	phy_register(&cis8204_driver);
441 
442 	return 0;
443 }
444