xref: /openbmc/u-boot/drivers/net/phy/ti.c (revision a22bbfda)
1 /*
2  * TI PHY drivers
3  *
4  * SPDX-License-Identifier:	GPL-2.0
5  *
6  */
7 #include <common.h>
8 #include <phy.h>
9 #include <linux/compat.h>
10 #include <malloc.h>
11 
12 #include <fdtdec.h>
13 #include <dm.h>
14 #include <dt-bindings/net/ti-dp83867.h>
15 
16 DECLARE_GLOBAL_DATA_PTR;
17 
18 /* TI DP83867 */
19 #define DP83867_DEVADDR		0x1f
20 
21 #define MII_DP83867_PHYCTRL	0x10
22 #define MII_DP83867_MICR	0x12
23 #define MII_DP83867_CFG2	0x14
24 #define MII_DP83867_BISCR	0x16
25 #define DP83867_CTRL		0x1f
26 
27 /* Extended Registers */
28 #define DP83867_RGMIICTL	0x0032
29 #define DP83867_RGMIIDCTL	0x0086
30 #define DP83867_IO_MUX_CFG	0x0170
31 
32 #define DP83867_SW_RESET	BIT(15)
33 #define DP83867_SW_RESTART	BIT(14)
34 
35 /* MICR Interrupt bits */
36 #define MII_DP83867_MICR_AN_ERR_INT_EN		BIT(15)
37 #define MII_DP83867_MICR_SPEED_CHNG_INT_EN	BIT(14)
38 #define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN	BIT(13)
39 #define MII_DP83867_MICR_PAGE_RXD_INT_EN	BIT(12)
40 #define MII_DP83867_MICR_AUTONEG_COMP_INT_EN	BIT(11)
41 #define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN	BIT(10)
42 #define MII_DP83867_MICR_FALSE_CARRIER_INT_EN	BIT(8)
43 #define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN	BIT(4)
44 #define MII_DP83867_MICR_WOL_INT_EN		BIT(3)
45 #define MII_DP83867_MICR_XGMII_ERR_INT_EN	BIT(2)
46 #define MII_DP83867_MICR_POL_CHNG_INT_EN	BIT(1)
47 #define MII_DP83867_MICR_JABBER_INT_EN		BIT(0)
48 
49 /* RGMIICTL bits */
50 #define DP83867_RGMII_TX_CLK_DELAY_EN		BIT(1)
51 #define DP83867_RGMII_RX_CLK_DELAY_EN		BIT(0)
52 
53 /* PHY CTRL bits */
54 #define DP83867_PHYCR_FIFO_DEPTH_SHIFT		14
55 #define DP83867_MDI_CROSSOVER		5
56 #define DP83867_MDI_CROSSOVER_AUTO	2
57 #define DP83867_MDI_CROSSOVER_MDIX	2
58 #define DP83867_PHYCTRL_SGMIIEN			0x0800
59 #define DP83867_PHYCTRL_RXFIFO_SHIFT	12
60 #define DP83867_PHYCTRL_TXFIFO_SHIFT	14
61 
62 /* RGMIIDCTL bits */
63 #define DP83867_RGMII_TX_CLK_DELAY_SHIFT	4
64 
65 /* CFG2 bits */
66 #define MII_DP83867_CFG2_SPEEDOPT_10EN		0x0040
67 #define MII_DP83867_CFG2_SGMII_AUTONEGEN	0x0080
68 #define MII_DP83867_CFG2_SPEEDOPT_ENH		0x0100
69 #define MII_DP83867_CFG2_SPEEDOPT_CNT		0x0800
70 #define MII_DP83867_CFG2_SPEEDOPT_INTLOW	0x2000
71 #define MII_DP83867_CFG2_MASK			0x003F
72 
73 #define MII_MMD_CTRL	0x0d /* MMD Access Control Register */
74 #define MII_MMD_DATA	0x0e /* MMD Access Data Register */
75 
76 /* MMD Access Control register fields */
77 #define MII_MMD_CTRL_DEVAD_MASK	0x1f /* Mask MMD DEVAD*/
78 #define MII_MMD_CTRL_ADDR	0x0000 /* Address */
79 #define MII_MMD_CTRL_NOINCR	0x4000 /* no post increment */
80 #define MII_MMD_CTRL_INCR_RDWT	0x8000 /* post increment on reads & writes */
81 #define MII_MMD_CTRL_INCR_ON_WT	0xC000 /* post increment on writes only */
82 
83 /* User setting - can be taken from DTS */
84 #define DEFAULT_RX_ID_DELAY	DP83867_RGMIIDCTL_2_25_NS
85 #define DEFAULT_TX_ID_DELAY	DP83867_RGMIIDCTL_2_75_NS
86 #define DEFAULT_FIFO_DEPTH	DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
87 
88 /* IO_MUX_CFG bits */
89 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL	0x1f
90 
91 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX	0x0
92 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN	0x1f
93 
94 struct dp83867_private {
95 	int rx_id_delay;
96 	int tx_id_delay;
97 	int fifo_depth;
98 	int io_impedance;
99 };
100 
101 /**
102  * phy_read_mmd_indirect - reads data from the MMD registers
103  * @phydev: The PHY device bus
104  * @prtad: MMD Address
105  * @devad: MMD DEVAD
106  * @addr: PHY address on the MII bus
107  *
108  * Description: it reads data from the MMD registers (clause 22 to access to
109  * clause 45) of the specified phy address.
110  * To read these registers we have:
111  * 1) Write reg 13 // DEVAD
112  * 2) Write reg 14 // MMD Address
113  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
114  * 3) Read  reg 14 // Read MMD data
115  */
116 int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
117 			  int devad, int addr)
118 {
119 	int value = -1;
120 
121 	/* Write the desired MMD Devad */
122 	phy_write(phydev, addr, MII_MMD_CTRL, devad);
123 
124 	/* Write the desired MMD register address */
125 	phy_write(phydev, addr, MII_MMD_DATA, prtad);
126 
127 	/* Select the Function : DATA with no post increment */
128 	phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
129 
130 	/* Read the content of the MMD's selected register */
131 	value = phy_read(phydev, addr, MII_MMD_DATA);
132 	return value;
133 }
134 
135 /**
136  * phy_write_mmd_indirect - writes data to the MMD registers
137  * @phydev: The PHY device
138  * @prtad: MMD Address
139  * @devad: MMD DEVAD
140  * @addr: PHY address on the MII bus
141  * @data: data to write in the MMD register
142  *
143  * Description: Write data from the MMD registers of the specified
144  * phy address.
145  * To write these registers we have:
146  * 1) Write reg 13 // DEVAD
147  * 2) Write reg 14 // MMD Address
148  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
149  * 3) Write reg 14 // Write MMD data
150  */
151 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
152 			    int devad, int addr, u32 data)
153 {
154 	/* Write the desired MMD Devad */
155 	phy_write(phydev, addr, MII_MMD_CTRL, devad);
156 
157 	/* Write the desired MMD register address */
158 	phy_write(phydev, addr, MII_MMD_DATA, prtad);
159 
160 	/* Select the Function : DATA with no post increment */
161 	phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
162 
163 	/* Write the data into MMD's selected register */
164 	phy_write(phydev, addr, MII_MMD_DATA, data);
165 }
166 
167 #if defined(CONFIG_DM_ETH)
168 /**
169  * dp83867_data_init - Convenience function for setting PHY specific data
170  *
171  * @phydev: the phy_device struct
172  */
173 static int dp83867_of_init(struct phy_device *phydev)
174 {
175 	struct dp83867_private *dp83867 = phydev->priv;
176 	struct udevice *dev = phydev->dev;
177 	int node = dev_of_offset(dev);
178 	const void *fdt = gd->fdt_blob;
179 
180 	if (fdtdec_get_bool(fdt, node, "ti,max-output-impedance"))
181 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
182 	else if (fdtdec_get_bool(fdt, node, "ti,min-output-impedance"))
183 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
184 	else
185 		dp83867->io_impedance = -EINVAL;
186 
187 	dp83867->rx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
188 				 "ti,rx-internal-delay", -1);
189 
190 	dp83867->tx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
191 				 "ti,tx-internal-delay", -1);
192 
193 	dp83867->fifo_depth = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
194 				 "ti,fifo-depth", -1);
195 
196 	return 0;
197 }
198 #else
199 static int dp83867_of_init(struct phy_device *phydev)
200 {
201 	struct dp83867_private *dp83867 = phydev->priv;
202 
203 	dp83867->rx_id_delay = DEFAULT_RX_ID_DELAY;
204 	dp83867->tx_id_delay = DEFAULT_TX_ID_DELAY;
205 	dp83867->fifo_depth = DEFAULT_FIFO_DEPTH;
206 	dp83867->io_impedance = -EINVAL;
207 
208 	return 0;
209 }
210 #endif
211 
212 static int dp83867_config(struct phy_device *phydev)
213 {
214 	struct dp83867_private *dp83867;
215 	unsigned int val, delay, cfg2;
216 	int ret;
217 
218 	if (!phydev->priv) {
219 		dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL);
220 		if (!dp83867)
221 			return -ENOMEM;
222 
223 		phydev->priv = dp83867;
224 		ret = dp83867_of_init(phydev);
225 		if (ret)
226 			goto err_out;
227 	} else {
228 		dp83867 = (struct dp83867_private *)phydev->priv;
229 	}
230 
231 	/* Restart the PHY.  */
232 	val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
233 	phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
234 		  val | DP83867_SW_RESTART);
235 
236 	if (phy_interface_is_rgmii(phydev)) {
237 		ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
238 			(DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
239 			(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
240 		if (ret)
241 			goto err_out;
242 	} else if (phy_interface_is_sgmii(phydev)) {
243 		phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
244 			  (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
245 
246 		cfg2 = phy_read(phydev, phydev->addr, MII_DP83867_CFG2);
247 		cfg2 &= MII_DP83867_CFG2_MASK;
248 		cfg2 |= (MII_DP83867_CFG2_SPEEDOPT_10EN |
249 			 MII_DP83867_CFG2_SGMII_AUTONEGEN |
250 			 MII_DP83867_CFG2_SPEEDOPT_ENH |
251 			 MII_DP83867_CFG2_SPEEDOPT_CNT |
252 			 MII_DP83867_CFG2_SPEEDOPT_INTLOW);
253 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2);
254 
255 		phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
256 				       DP83867_DEVADDR, phydev->addr, 0x0);
257 
258 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
259 			  DP83867_PHYCTRL_SGMIIEN |
260 			  (DP83867_MDI_CROSSOVER_MDIX <<
261 			  DP83867_MDI_CROSSOVER) |
262 			  (dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) |
263 			  (dp83867->fifo_depth << DP83867_PHYCTRL_TXFIFO_SHIFT));
264 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
265 	}
266 
267 	if (phy_interface_is_rgmii(phydev)) {
268 		val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
269 					    DP83867_DEVADDR, phydev->addr);
270 
271 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
272 			val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
273 				DP83867_RGMII_RX_CLK_DELAY_EN);
274 
275 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
276 			val |= DP83867_RGMII_TX_CLK_DELAY_EN;
277 
278 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
279 			val |= DP83867_RGMII_RX_CLK_DELAY_EN;
280 
281 		phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
282 				       DP83867_DEVADDR, phydev->addr, val);
283 
284 		delay = (dp83867->rx_id_delay |
285 			 (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
286 
287 		phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
288 				       DP83867_DEVADDR, phydev->addr, delay);
289 
290 		if (dp83867->io_impedance >= 0) {
291 			val = phy_read_mmd_indirect(phydev,
292 						    DP83867_IO_MUX_CFG,
293 						    DP83867_DEVADDR,
294 						    phydev->addr);
295 			val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
296 			val |= dp83867->io_impedance &
297 			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
298 			phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG,
299 					       DP83867_DEVADDR, phydev->addr,
300 					       val);
301 		}
302 	}
303 
304 	genphy_config_aneg(phydev);
305 	return 0;
306 
307 err_out:
308 	kfree(dp83867);
309 	return ret;
310 }
311 
312 static struct phy_driver DP83867_driver = {
313 	.name = "TI DP83867",
314 	.uid = 0x2000a231,
315 	.mask = 0xfffffff0,
316 	.features = PHY_GBIT_FEATURES,
317 	.config = &dp83867_config,
318 	.startup = &genphy_startup,
319 	.shutdown = &genphy_shutdown,
320 };
321 
322 int phy_ti_init(void)
323 {
324 	phy_register(&DP83867_driver);
325 	return 0;
326 }
327