1 /* 2 * Generic PHY Management code 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Copyright 2011 Freescale Semiconductor, Inc. 7 * author Andy Fleming 8 * 9 * Based loosely off of Linux's PHY Lib 10 */ 11 12 #include <config.h> 13 #include <common.h> 14 #include <malloc.h> 15 #include <net.h> 16 #include <command.h> 17 #include <miiphy.h> 18 #include <phy.h> 19 #include <errno.h> 20 #include <linux/err.h> 21 #include <linux/compiler.h> 22 23 /* Generic PHY support and helper functions */ 24 25 /** 26 * genphy_config_advert - sanitize and advertise auto-negotation parameters 27 * @phydev: target phy_device struct 28 * 29 * Description: Writes MII_ADVERTISE with the appropriate values, 30 * after sanitizing the values to make sure we only advertise 31 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement 32 * hasn't changed, and > 0 if it has changed. 33 */ 34 static int genphy_config_advert(struct phy_device *phydev) 35 { 36 u32 advertise; 37 int oldadv, adv; 38 int err, changed = 0; 39 40 /* Only allow advertising what 41 * this PHY supports */ 42 phydev->advertising &= phydev->supported; 43 advertise = phydev->advertising; 44 45 /* Setup standard advertisement */ 46 oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); 47 48 if (adv < 0) 49 return adv; 50 51 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | 52 ADVERTISE_PAUSE_ASYM); 53 if (advertise & ADVERTISED_10baseT_Half) 54 adv |= ADVERTISE_10HALF; 55 if (advertise & ADVERTISED_10baseT_Full) 56 adv |= ADVERTISE_10FULL; 57 if (advertise & ADVERTISED_100baseT_Half) 58 adv |= ADVERTISE_100HALF; 59 if (advertise & ADVERTISED_100baseT_Full) 60 adv |= ADVERTISE_100FULL; 61 if (advertise & ADVERTISED_Pause) 62 adv |= ADVERTISE_PAUSE_CAP; 63 if (advertise & ADVERTISED_Asym_Pause) 64 adv |= ADVERTISE_PAUSE_ASYM; 65 if (advertise & ADVERTISED_1000baseX_Half) 66 adv |= ADVERTISE_1000XHALF; 67 if (advertise & ADVERTISED_1000baseX_Full) 68 adv |= ADVERTISE_1000XFULL; 69 70 if (adv != oldadv) { 71 err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv); 72 73 if (err < 0) 74 return err; 75 changed = 1; 76 } 77 78 /* Configure gigabit if it's supported */ 79 if (phydev->supported & (SUPPORTED_1000baseT_Half | 80 SUPPORTED_1000baseT_Full)) { 81 oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); 82 83 if (adv < 0) 84 return adv; 85 86 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); 87 if (advertise & SUPPORTED_1000baseT_Half) 88 adv |= ADVERTISE_1000HALF; 89 if (advertise & SUPPORTED_1000baseT_Full) 90 adv |= ADVERTISE_1000FULL; 91 92 if (adv != oldadv) { 93 err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, 94 adv); 95 96 if (err < 0) 97 return err; 98 changed = 1; 99 } 100 } 101 102 return changed; 103 } 104 105 106 /** 107 * genphy_setup_forced - configures/forces speed/duplex from @phydev 108 * @phydev: target phy_device struct 109 * 110 * Description: Configures MII_BMCR to force speed/duplex 111 * to the values in phydev. Assumes that the values are valid. 112 */ 113 static int genphy_setup_forced(struct phy_device *phydev) 114 { 115 int err; 116 int ctl = 0; 117 118 phydev->pause = phydev->asym_pause = 0; 119 120 if (SPEED_1000 == phydev->speed) 121 ctl |= BMCR_SPEED1000; 122 else if (SPEED_100 == phydev->speed) 123 ctl |= BMCR_SPEED100; 124 125 if (DUPLEX_FULL == phydev->duplex) 126 ctl |= BMCR_FULLDPLX; 127 128 err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); 129 130 return err; 131 } 132 133 134 /** 135 * genphy_restart_aneg - Enable and Restart Autonegotiation 136 * @phydev: target phy_device struct 137 */ 138 int genphy_restart_aneg(struct phy_device *phydev) 139 { 140 int ctl; 141 142 ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); 143 144 if (ctl < 0) 145 return ctl; 146 147 ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); 148 149 /* Don't isolate the PHY if we're negotiating */ 150 ctl &= ~(BMCR_ISOLATE); 151 152 ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); 153 154 return ctl; 155 } 156 157 158 /** 159 * genphy_config_aneg - restart auto-negotiation or write BMCR 160 * @phydev: target phy_device struct 161 * 162 * Description: If auto-negotiation is enabled, we configure the 163 * advertising, and then restart auto-negotiation. If it is not 164 * enabled, then we write the BMCR. 165 */ 166 int genphy_config_aneg(struct phy_device *phydev) 167 { 168 int result; 169 170 if (AUTONEG_ENABLE != phydev->autoneg) 171 return genphy_setup_forced(phydev); 172 173 result = genphy_config_advert(phydev); 174 175 if (result < 0) /* error */ 176 return result; 177 178 if (result == 0) { 179 /* Advertisment hasn't changed, but maybe aneg was never on to 180 * begin with? Or maybe phy was isolated? */ 181 int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); 182 183 if (ctl < 0) 184 return ctl; 185 186 if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) 187 result = 1; /* do restart aneg */ 188 } 189 190 /* Only restart aneg if we are advertising something different 191 * than we were before. */ 192 if (result > 0) 193 result = genphy_restart_aneg(phydev); 194 195 return result; 196 } 197 198 /** 199 * genphy_update_link - update link status in @phydev 200 * @phydev: target phy_device struct 201 * 202 * Description: Update the value in phydev->link to reflect the 203 * current link value. In order to do this, we need to read 204 * the status register twice, keeping the second value. 205 */ 206 int genphy_update_link(struct phy_device *phydev) 207 { 208 unsigned int mii_reg; 209 210 /* 211 * Wait if the link is up, and autonegotiation is in progress 212 * (ie - we're capable and it's not done) 213 */ 214 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); 215 216 /* 217 * If we already saw the link up, and it hasn't gone down, then 218 * we don't need to wait for autoneg again 219 */ 220 if (phydev->link && mii_reg & BMSR_LSTATUS) 221 return 0; 222 223 if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) { 224 int i = 0; 225 226 printf("%s Waiting for PHY auto negotiation to complete", 227 phydev->dev->name); 228 while (!(mii_reg & BMSR_ANEGCOMPLETE)) { 229 /* 230 * Timeout reached ? 231 */ 232 if (i > PHY_ANEG_TIMEOUT) { 233 printf(" TIMEOUT !\n"); 234 phydev->link = 0; 235 return 0; 236 } 237 238 if (ctrlc()) { 239 puts("user interrupt!\n"); 240 phydev->link = 0; 241 return -EINTR; 242 } 243 244 if ((i++ % 500) == 0) 245 printf("."); 246 247 udelay(1000); /* 1 ms */ 248 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); 249 } 250 printf(" done\n"); 251 phydev->link = 1; 252 } else { 253 /* Read the link a second time to clear the latched state */ 254 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); 255 256 if (mii_reg & BMSR_LSTATUS) 257 phydev->link = 1; 258 else 259 phydev->link = 0; 260 } 261 262 return 0; 263 } 264 265 /* 266 * Generic function which updates the speed and duplex. If 267 * autonegotiation is enabled, it uses the AND of the link 268 * partner's advertised capabilities and our advertised 269 * capabilities. If autonegotiation is disabled, we use the 270 * appropriate bits in the control register. 271 * 272 * Stolen from Linux's mii.c and phy_device.c 273 */ 274 int genphy_parse_link(struct phy_device *phydev) 275 { 276 int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); 277 278 /* We're using autonegotiation */ 279 if (phydev->supported & SUPPORTED_Autoneg) { 280 u32 lpa = 0; 281 int gblpa = 0; 282 u32 estatus = 0; 283 284 /* Check for gigabit capability */ 285 if (phydev->supported & (SUPPORTED_1000baseT_Full | 286 SUPPORTED_1000baseT_Half)) { 287 /* We want a list of states supported by 288 * both PHYs in the link 289 */ 290 gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); 291 if (gblpa < 0) { 292 debug("Could not read MII_STAT1000. Ignoring gigabit capability\n"); 293 gblpa = 0; 294 } 295 gblpa &= phy_read(phydev, 296 MDIO_DEVAD_NONE, MII_CTRL1000) << 2; 297 } 298 299 /* Set the baseline so we only have to set them 300 * if they're different 301 */ 302 phydev->speed = SPEED_10; 303 phydev->duplex = DUPLEX_HALF; 304 305 /* Check the gigabit fields */ 306 if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { 307 phydev->speed = SPEED_1000; 308 309 if (gblpa & PHY_1000BTSR_1000FD) 310 phydev->duplex = DUPLEX_FULL; 311 312 /* We're done! */ 313 return 0; 314 } 315 316 lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); 317 lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); 318 319 if (lpa & (LPA_100FULL | LPA_100HALF)) { 320 phydev->speed = SPEED_100; 321 322 if (lpa & LPA_100FULL) 323 phydev->duplex = DUPLEX_FULL; 324 325 } else if (lpa & LPA_10FULL) 326 phydev->duplex = DUPLEX_FULL; 327 328 /* 329 * Extended status may indicate that the PHY supports 330 * 1000BASE-T/X even though the 1000BASE-T registers 331 * are missing. In this case we can't tell whether the 332 * peer also supports it, so we only check extended 333 * status if the 1000BASE-T registers are actually 334 * missing. 335 */ 336 if ((mii_reg & BMSR_ESTATEN) && !(mii_reg & BMSR_ERCAP)) 337 estatus = phy_read(phydev, MDIO_DEVAD_NONE, 338 MII_ESTATUS); 339 340 if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_XHALF | 341 ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) { 342 phydev->speed = SPEED_1000; 343 if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_TFULL)) 344 phydev->duplex = DUPLEX_FULL; 345 } 346 347 } else { 348 u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); 349 350 phydev->speed = SPEED_10; 351 phydev->duplex = DUPLEX_HALF; 352 353 if (bmcr & BMCR_FULLDPLX) 354 phydev->duplex = DUPLEX_FULL; 355 356 if (bmcr & BMCR_SPEED1000) 357 phydev->speed = SPEED_1000; 358 else if (bmcr & BMCR_SPEED100) 359 phydev->speed = SPEED_100; 360 } 361 362 return 0; 363 } 364 365 int genphy_config(struct phy_device *phydev) 366 { 367 int val; 368 u32 features; 369 370 /* For now, I'll claim that the generic driver supports 371 * all possible port types */ 372 features = (SUPPORTED_TP | SUPPORTED_MII 373 | SUPPORTED_AUI | SUPPORTED_FIBRE | 374 SUPPORTED_BNC); 375 376 /* Do we support autonegotiation? */ 377 val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); 378 379 if (val < 0) 380 return val; 381 382 if (val & BMSR_ANEGCAPABLE) 383 features |= SUPPORTED_Autoneg; 384 385 if (val & BMSR_100FULL) 386 features |= SUPPORTED_100baseT_Full; 387 if (val & BMSR_100HALF) 388 features |= SUPPORTED_100baseT_Half; 389 if (val & BMSR_10FULL) 390 features |= SUPPORTED_10baseT_Full; 391 if (val & BMSR_10HALF) 392 features |= SUPPORTED_10baseT_Half; 393 394 if (val & BMSR_ESTATEN) { 395 val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS); 396 397 if (val < 0) 398 return val; 399 400 if (val & ESTATUS_1000_TFULL) 401 features |= SUPPORTED_1000baseT_Full; 402 if (val & ESTATUS_1000_THALF) 403 features |= SUPPORTED_1000baseT_Half; 404 if (val & ESTATUS_1000_XFULL) 405 features |= SUPPORTED_1000baseX_Full; 406 if (val & ESTATUS_1000_XHALF) 407 features |= SUPPORTED_1000baseX_Half; 408 } 409 410 phydev->supported = features; 411 phydev->advertising = features; 412 413 genphy_config_aneg(phydev); 414 415 return 0; 416 } 417 418 int genphy_startup(struct phy_device *phydev) 419 { 420 genphy_update_link(phydev); 421 genphy_parse_link(phydev); 422 423 return 0; 424 } 425 426 int genphy_shutdown(struct phy_device *phydev) 427 { 428 return 0; 429 } 430 431 static struct phy_driver genphy_driver = { 432 .uid = 0xffffffff, 433 .mask = 0xffffffff, 434 .name = "Generic PHY", 435 .features = 0, 436 .config = genphy_config, 437 .startup = genphy_startup, 438 .shutdown = genphy_shutdown, 439 }; 440 441 static LIST_HEAD(phy_drivers); 442 443 int phy_init(void) 444 { 445 #ifdef CONFIG_PHY_ATHEROS 446 phy_atheros_init(); 447 #endif 448 #ifdef CONFIG_PHY_BROADCOM 449 phy_broadcom_init(); 450 #endif 451 #ifdef CONFIG_PHY_DAVICOM 452 phy_davicom_init(); 453 #endif 454 #ifdef CONFIG_PHY_ET1011C 455 phy_et1011c_init(); 456 #endif 457 #ifdef CONFIG_PHY_ICPLUS 458 phy_icplus_init(); 459 #endif 460 #ifdef CONFIG_PHY_LXT 461 phy_lxt_init(); 462 #endif 463 #ifdef CONFIG_PHY_MARVELL 464 phy_marvell_init(); 465 #endif 466 #ifdef CONFIG_PHY_MICREL 467 phy_micrel_init(); 468 #endif 469 #ifdef CONFIG_PHY_NATSEMI 470 phy_natsemi_init(); 471 #endif 472 #ifdef CONFIG_PHY_REALTEK 473 phy_realtek_init(); 474 #endif 475 #ifdef CONFIG_PHY_SMSC 476 phy_smsc_init(); 477 #endif 478 #ifdef CONFIG_PHY_TERANETICS 479 phy_teranetics_init(); 480 #endif 481 #ifdef CONFIG_PHY_VITESSE 482 phy_vitesse_init(); 483 #endif 484 485 return 0; 486 } 487 488 int phy_register(struct phy_driver *drv) 489 { 490 INIT_LIST_HEAD(&drv->list); 491 list_add_tail(&drv->list, &phy_drivers); 492 493 return 0; 494 } 495 496 static int phy_probe(struct phy_device *phydev) 497 { 498 int err = 0; 499 500 phydev->advertising = phydev->supported = phydev->drv->features; 501 phydev->mmds = phydev->drv->mmds; 502 503 if (phydev->drv->probe) 504 err = phydev->drv->probe(phydev); 505 506 return err; 507 } 508 509 static struct phy_driver *generic_for_interface(phy_interface_t interface) 510 { 511 #ifdef CONFIG_PHYLIB_10G 512 if (is_10g_interface(interface)) 513 return &gen10g_driver; 514 #endif 515 516 return &genphy_driver; 517 } 518 519 static struct phy_driver *get_phy_driver(struct phy_device *phydev, 520 phy_interface_t interface) 521 { 522 struct list_head *entry; 523 int phy_id = phydev->phy_id; 524 struct phy_driver *drv = NULL; 525 526 list_for_each(entry, &phy_drivers) { 527 drv = list_entry(entry, struct phy_driver, list); 528 if ((drv->uid & drv->mask) == (phy_id & drv->mask)) 529 return drv; 530 } 531 532 /* If we made it here, there's no driver for this PHY */ 533 return generic_for_interface(interface); 534 } 535 536 static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, 537 int phy_id, 538 phy_interface_t interface) 539 { 540 struct phy_device *dev; 541 542 /* We allocate the device, and initialize the 543 * default values */ 544 dev = malloc(sizeof(*dev)); 545 if (!dev) { 546 printf("Failed to allocate PHY device for %s:%d\n", 547 bus->name, addr); 548 return NULL; 549 } 550 551 memset(dev, 0, sizeof(*dev)); 552 553 dev->duplex = -1; 554 dev->link = 1; 555 dev->interface = interface; 556 557 dev->autoneg = AUTONEG_ENABLE; 558 559 dev->addr = addr; 560 dev->phy_id = phy_id; 561 dev->bus = bus; 562 563 dev->drv = get_phy_driver(dev, interface); 564 565 phy_probe(dev); 566 567 bus->phymap[addr] = dev; 568 569 return dev; 570 } 571 572 /** 573 * get_phy_id - reads the specified addr for its ID. 574 * @bus: the target MII bus 575 * @addr: PHY address on the MII bus 576 * @phy_id: where to store the ID retrieved. 577 * 578 * Description: Reads the ID registers of the PHY at @addr on the 579 * @bus, stores it in @phy_id and returns zero on success. 580 */ 581 int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) 582 { 583 int phy_reg; 584 585 /* Grab the bits from PHYIR1, and put them 586 * in the upper half */ 587 phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); 588 589 if (phy_reg < 0) 590 return -EIO; 591 592 *phy_id = (phy_reg & 0xffff) << 16; 593 594 /* Grab the bits from PHYIR2, and put them in the lower half */ 595 phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); 596 597 if (phy_reg < 0) 598 return -EIO; 599 600 *phy_id |= (phy_reg & 0xffff); 601 602 return 0; 603 } 604 605 static struct phy_device *create_phy_by_mask(struct mii_dev *bus, 606 unsigned phy_mask, int devad, phy_interface_t interface) 607 { 608 u32 phy_id = 0xffffffff; 609 while (phy_mask) { 610 int addr = ffs(phy_mask) - 1; 611 int r = get_phy_id(bus, addr, devad, &phy_id); 612 if (r < 0) 613 return ERR_PTR(r); 614 /* If the PHY ID is mostly f's, we didn't find anything */ 615 if ((phy_id & 0x1fffffff) != 0x1fffffff) 616 return phy_device_create(bus, addr, phy_id, interface); 617 phy_mask &= ~(1 << addr); 618 } 619 return NULL; 620 } 621 622 static struct phy_device *search_for_existing_phy(struct mii_dev *bus, 623 unsigned phy_mask, phy_interface_t interface) 624 { 625 /* If we have one, return the existing device, with new interface */ 626 while (phy_mask) { 627 int addr = ffs(phy_mask) - 1; 628 if (bus->phymap[addr]) { 629 bus->phymap[addr]->interface = interface; 630 return bus->phymap[addr]; 631 } 632 phy_mask &= ~(1 << addr); 633 } 634 return NULL; 635 } 636 637 static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus, 638 unsigned phy_mask, phy_interface_t interface) 639 { 640 int i; 641 struct phy_device *phydev; 642 643 phydev = search_for_existing_phy(bus, phy_mask, interface); 644 if (phydev) 645 return phydev; 646 /* Try Standard (ie Clause 22) access */ 647 /* Otherwise we have to try Clause 45 */ 648 for (i = 0; i < 5; i++) { 649 phydev = create_phy_by_mask(bus, phy_mask, 650 i ? i : MDIO_DEVAD_NONE, interface); 651 if (IS_ERR(phydev)) 652 return NULL; 653 if (phydev) 654 return phydev; 655 } 656 printf("Phy not found\n"); 657 return phy_device_create(bus, ffs(phy_mask) - 1, 0xffffffff, interface); 658 } 659 660 /** 661 * get_phy_device - reads the specified PHY device and returns its @phy_device struct 662 * @bus: the target MII bus 663 * @addr: PHY address on the MII bus 664 * 665 * Description: Reads the ID registers of the PHY at @addr on the 666 * @bus, then allocates and returns the phy_device to represent it. 667 */ 668 static struct phy_device *get_phy_device(struct mii_dev *bus, int addr, 669 phy_interface_t interface) 670 { 671 return get_phy_device_by_mask(bus, 1 << addr, interface); 672 } 673 674 int phy_reset(struct phy_device *phydev) 675 { 676 int reg; 677 int timeout = 500; 678 int devad = MDIO_DEVAD_NONE; 679 680 #ifdef CONFIG_PHYLIB_10G 681 /* If it's 10G, we need to issue reset through one of the MMDs */ 682 if (is_10g_interface(phydev->interface)) { 683 if (!phydev->mmds) 684 gen10g_discover_mmds(phydev); 685 686 devad = ffs(phydev->mmds) - 1; 687 } 688 #endif 689 690 reg = phy_read(phydev, devad, MII_BMCR); 691 if (reg < 0) { 692 debug("PHY status read failed\n"); 693 return -1; 694 } 695 696 reg |= BMCR_RESET; 697 698 if (phy_write(phydev, devad, MII_BMCR, reg) < 0) { 699 debug("PHY reset failed\n"); 700 return -1; 701 } 702 703 #ifdef CONFIG_PHY_RESET_DELAY 704 udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ 705 #endif 706 /* 707 * Poll the control register for the reset bit to go to 0 (it is 708 * auto-clearing). This should happen within 0.5 seconds per the 709 * IEEE spec. 710 */ 711 while ((reg & BMCR_RESET) && timeout--) { 712 reg = phy_read(phydev, devad, MII_BMCR); 713 714 if (reg < 0) { 715 debug("PHY status read failed\n"); 716 return -1; 717 } 718 udelay(1000); 719 } 720 721 if (reg & BMCR_RESET) { 722 puts("PHY reset timed out\n"); 723 return -1; 724 } 725 726 return 0; 727 } 728 729 int miiphy_reset(const char *devname, unsigned char addr) 730 { 731 struct mii_dev *bus = miiphy_get_dev_by_name(devname); 732 struct phy_device *phydev; 733 734 /* 735 * miiphy_reset was only used on standard PHYs, so we'll fake it here. 736 * If later code tries to connect with the right interface, this will 737 * be corrected by get_phy_device in phy_connect() 738 */ 739 phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII); 740 741 return phy_reset(phydev); 742 } 743 744 struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask, 745 phy_interface_t interface) 746 { 747 /* Reset the bus */ 748 if (bus->reset) 749 bus->reset(bus); 750 751 /* Wait 15ms to make sure the PHY has come out of hard reset */ 752 udelay(15000); 753 return get_phy_device_by_mask(bus, phy_mask, interface); 754 } 755 756 void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev) 757 { 758 /* Soft Reset the PHY */ 759 phy_reset(phydev); 760 if (phydev->dev) { 761 printf("%s:%d is connected to %s. Reconnecting to %s\n", 762 phydev->bus->name, phydev->addr, 763 phydev->dev->name, dev->name); 764 } 765 phydev->dev = dev; 766 debug("%s connected to %s\n", dev->name, phydev->drv->name); 767 } 768 769 struct phy_device *phy_connect(struct mii_dev *bus, int addr, 770 struct eth_device *dev, phy_interface_t interface) 771 { 772 struct phy_device *phydev; 773 774 phydev = phy_find_by_mask(bus, 1 << addr, interface); 775 if (phydev) 776 phy_connect_dev(phydev, dev); 777 else 778 printf("Could not get PHY for %s: addr %d\n", bus->name, addr); 779 return phydev; 780 } 781 782 /* 783 * Start the PHY. Returns 0 on success, or a negative error code. 784 */ 785 int phy_startup(struct phy_device *phydev) 786 { 787 if (phydev->drv->startup) 788 return phydev->drv->startup(phydev); 789 790 return 0; 791 } 792 793 static int __board_phy_config(struct phy_device *phydev) 794 { 795 if (phydev->drv->config) 796 return phydev->drv->config(phydev); 797 return 0; 798 } 799 800 int board_phy_config(struct phy_device *phydev) 801 __attribute__((weak, alias("__board_phy_config"))); 802 803 int phy_config(struct phy_device *phydev) 804 { 805 /* Invoke an optional board-specific helper */ 806 board_phy_config(phydev); 807 808 return 0; 809 } 810 811 int phy_shutdown(struct phy_device *phydev) 812 { 813 if (phydev->drv->shutdown) 814 phydev->drv->shutdown(phydev); 815 816 return 0; 817 } 818