1 /* 2 * Marvell PHY drivers 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Copyright 2010-2011 Freescale Semiconductor, Inc. 7 * author Andy Fleming 8 */ 9 #include <config.h> 10 #include <common.h> 11 #include <phy.h> 12 13 #define PHY_AUTONEGOTIATE_TIMEOUT 5000 14 15 /* 88E1011 PHY Status Register */ 16 #define MIIM_88E1xxx_PHY_STATUS 0x11 17 #define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000 18 #define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000 19 #define MIIM_88E1xxx_PHYSTAT_100 0x4000 20 #define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000 21 #define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800 22 #define MIIM_88E1xxx_PHYSTAT_LINK 0x0400 23 24 #define MIIM_88E1xxx_PHY_SCR 0x10 25 #define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060 26 27 /* 88E1111 PHY LED Control Register */ 28 #define MIIM_88E1111_PHY_LED_CONTROL 24 29 #define MIIM_88E1111_PHY_LED_DIRECT 0x4100 30 #define MIIM_88E1111_PHY_LED_COMBINE 0x411C 31 32 /* 88E1111 Extended PHY Specific Control Register */ 33 #define MIIM_88E1111_PHY_EXT_CR 0x14 34 #define MIIM_88E1111_RX_DELAY 0x80 35 #define MIIM_88E1111_TX_DELAY 0x2 36 37 /* 88E1111 Extended PHY Specific Status Register */ 38 #define MIIM_88E1111_PHY_EXT_SR 0x1b 39 #define MIIM_88E1111_HWCFG_MODE_MASK 0xf 40 #define MIIM_88E1111_HWCFG_MODE_COPPER_RGMII 0xb 41 #define MIIM_88E1111_HWCFG_MODE_FIBER_RGMII 0x3 42 #define MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK 0x4 43 #define MIIM_88E1111_HWCFG_MODE_COPPER_RTBI 0x9 44 #define MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO 0x8000 45 #define MIIM_88E1111_HWCFG_FIBER_COPPER_RES 0x2000 46 47 #define MIIM_88E1111_COPPER 0 48 #define MIIM_88E1111_FIBER 1 49 50 /* 88E1118 PHY defines */ 51 #define MIIM_88E1118_PHY_PAGE 22 52 #define MIIM_88E1118_PHY_LED_PAGE 3 53 54 /* 88E1121 PHY LED Control Register */ 55 #define MIIM_88E1121_PHY_LED_CTRL 16 56 #define MIIM_88E1121_PHY_LED_PAGE 3 57 #define MIIM_88E1121_PHY_LED_DEF 0x0030 58 59 /* 88E1121 PHY IRQ Enable/Status Register */ 60 #define MIIM_88E1121_PHY_IRQ_EN 18 61 #define MIIM_88E1121_PHY_IRQ_STATUS 19 62 63 #define MIIM_88E1121_PHY_PAGE 22 64 65 /* 88E1145 Extended PHY Specific Control Register */ 66 #define MIIM_88E1145_PHY_EXT_CR 20 67 #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 68 #define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 69 70 #define MIIM_88E1145_PHY_LED_CONTROL 24 71 #define MIIM_88E1145_PHY_LED_DIRECT 0x4100 72 73 #define MIIM_88E1145_PHY_PAGE 29 74 #define MIIM_88E1145_PHY_CAL_OV 30 75 76 #define MIIM_88E1149_PHY_PAGE 29 77 78 /* 88E1310 PHY defines */ 79 #define MIIM_88E1310_PHY_LED_CTRL 16 80 #define MIIM_88E1310_PHY_IRQ_EN 18 81 #define MIIM_88E1310_PHY_RGMII_CTRL 21 82 #define MIIM_88E1310_PHY_PAGE 22 83 84 /* Marvell 88E1011S */ 85 static int m88e1011s_config(struct phy_device *phydev) 86 { 87 /* Reset and configure the PHY */ 88 phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); 89 90 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); 91 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); 92 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); 93 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0); 94 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); 95 96 phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); 97 98 genphy_config_aneg(phydev); 99 100 return 0; 101 } 102 103 /* Parse the 88E1011's status register for speed and duplex 104 * information 105 */ 106 static int m88e1xxx_parse_status(struct phy_device *phydev) 107 { 108 unsigned int speed; 109 unsigned int mii_reg; 110 111 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS); 112 113 if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) && 114 !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { 115 int i = 0; 116 117 puts("Waiting for PHY realtime link"); 118 while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { 119 /* Timeout reached ? */ 120 if (i > PHY_AUTONEGOTIATE_TIMEOUT) { 121 puts(" TIMEOUT !\n"); 122 phydev->link = 0; 123 return -ETIMEDOUT; 124 } 125 126 if ((i++ % 1000) == 0) 127 putc('.'); 128 udelay(1000); 129 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, 130 MIIM_88E1xxx_PHY_STATUS); 131 } 132 puts(" done\n"); 133 udelay(500000); /* another 500 ms (results in faster booting) */ 134 } else { 135 if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) 136 phydev->link = 1; 137 else 138 phydev->link = 0; 139 } 140 141 if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX) 142 phydev->duplex = DUPLEX_FULL; 143 else 144 phydev->duplex = DUPLEX_HALF; 145 146 speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED; 147 148 switch (speed) { 149 case MIIM_88E1xxx_PHYSTAT_GBIT: 150 phydev->speed = SPEED_1000; 151 break; 152 case MIIM_88E1xxx_PHYSTAT_100: 153 phydev->speed = SPEED_100; 154 break; 155 default: 156 phydev->speed = SPEED_10; 157 break; 158 } 159 160 return 0; 161 } 162 163 static int m88e1011s_startup(struct phy_device *phydev) 164 { 165 int ret; 166 167 ret = genphy_update_link(phydev); 168 if (ret) 169 return ret; 170 171 return m88e1xxx_parse_status(phydev); 172 } 173 174 /* Marvell 88E1111S */ 175 static int m88e1111s_config(struct phy_device *phydev) 176 { 177 int reg; 178 179 if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || 180 (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || 181 (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || 182 (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { 183 reg = phy_read(phydev, 184 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); 185 if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || 186 (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) { 187 reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); 188 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { 189 reg &= ~MIIM_88E1111_TX_DELAY; 190 reg |= MIIM_88E1111_RX_DELAY; 191 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { 192 reg &= ~MIIM_88E1111_RX_DELAY; 193 reg |= MIIM_88E1111_TX_DELAY; 194 } 195 196 phy_write(phydev, 197 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); 198 199 reg = phy_read(phydev, 200 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); 201 202 reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); 203 204 if (reg & MIIM_88E1111_HWCFG_FIBER_COPPER_RES) 205 reg |= MIIM_88E1111_HWCFG_MODE_FIBER_RGMII; 206 else 207 reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII; 208 209 phy_write(phydev, 210 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR, reg); 211 } 212 213 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 214 reg = phy_read(phydev, 215 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); 216 217 reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); 218 reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK; 219 reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; 220 221 phy_write(phydev, MDIO_DEVAD_NONE, 222 MIIM_88E1111_PHY_EXT_SR, reg); 223 } 224 225 if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { 226 reg = phy_read(phydev, 227 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); 228 reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); 229 phy_write(phydev, 230 MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); 231 232 reg = phy_read(phydev, MDIO_DEVAD_NONE, 233 MIIM_88E1111_PHY_EXT_SR); 234 reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | 235 MIIM_88E1111_HWCFG_FIBER_COPPER_RES); 236 reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; 237 phy_write(phydev, MDIO_DEVAD_NONE, 238 MIIM_88E1111_PHY_EXT_SR, reg); 239 240 /* soft reset */ 241 phy_reset(phydev); 242 243 reg = phy_read(phydev, MDIO_DEVAD_NONE, 244 MIIM_88E1111_PHY_EXT_SR); 245 reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | 246 MIIM_88E1111_HWCFG_FIBER_COPPER_RES); 247 reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI | 248 MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; 249 phy_write(phydev, MDIO_DEVAD_NONE, 250 MIIM_88E1111_PHY_EXT_SR, reg); 251 } 252 253 /* soft reset */ 254 phy_reset(phydev); 255 256 genphy_config_aneg(phydev); 257 genphy_restart_aneg(phydev); 258 259 return 0; 260 } 261 262 /** 263 * m88e1518_phy_writebits - write bits to a register 264 */ 265 void m88e1518_phy_writebits(struct phy_device *phydev, 266 u8 reg_num, u16 offset, u16 len, u16 data) 267 { 268 u16 reg, mask; 269 270 if ((len + offset) >= 16) 271 mask = 0 - (1 << offset); 272 else 273 mask = (1 << (len + offset)) - (1 << offset); 274 275 reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num); 276 277 reg &= ~mask; 278 reg |= data << offset; 279 280 phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); 281 } 282 283 static int m88e1518_config(struct phy_device *phydev) 284 { 285 /* 286 * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 287 * /88E1514 Rev A0, Errata Section 3.1 288 */ 289 290 /* EEE initialization */ 291 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); 292 phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B); 293 phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144); 294 phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28); 295 phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146); 296 phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233); 297 phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D); 298 phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C); 299 phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159); 300 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); 301 302 /* SGMII-to-Copper mode initialization */ 303 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 304 /* Select page 18 */ 305 phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); 306 307 /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */ 308 m88e1518_phy_writebits(phydev, 20, 0, 3, 1); 309 310 /* PHY reset is necessary after changing MODE[2:0] */ 311 m88e1518_phy_writebits(phydev, 20, 15, 1, 1); 312 313 /* Reset page selection */ 314 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); 315 316 udelay(100); 317 } 318 319 return m88e1111s_config(phydev); 320 } 321 322 /* Marvell 88E1510 */ 323 static int m88e1510_config(struct phy_device *phydev) 324 { 325 /* Select page 3 */ 326 phy_write(phydev, MDIO_DEVAD_NONE, 22, 3); 327 328 /* Enable INTn output on LED[2] */ 329 m88e1518_phy_writebits(phydev, 18, 7, 1, 1); 330 331 /* Configure LEDs */ 332 m88e1518_phy_writebits(phydev, 16, 0, 4, 3); /* LED[0]:0011 (ACT) */ 333 m88e1518_phy_writebits(phydev, 16, 4, 4, 6); /* LED[1]:0110 (LINK) */ 334 335 /* Reset page selection */ 336 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); 337 338 return m88e1518_config(phydev); 339 } 340 341 /* Marvell 88E1118 */ 342 static int m88e1118_config(struct phy_device *phydev) 343 { 344 /* Change Page Number */ 345 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002); 346 /* Delay RGMII TX and RX */ 347 phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070); 348 /* Change Page Number */ 349 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003); 350 /* Adjust LED control */ 351 phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e); 352 /* Change Page Number */ 353 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); 354 355 return genphy_config_aneg(phydev); 356 } 357 358 static int m88e1118_startup(struct phy_device *phydev) 359 { 360 int ret; 361 362 /* Change Page Number */ 363 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); 364 365 ret = genphy_update_link(phydev); 366 if (ret) 367 return ret; 368 369 return m88e1xxx_parse_status(phydev); 370 } 371 372 /* Marvell 88E1121R */ 373 static int m88e1121_config(struct phy_device *phydev) 374 { 375 int pg; 376 377 /* Configure the PHY */ 378 genphy_config_aneg(phydev); 379 380 /* Switch the page to access the led register */ 381 pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE); 382 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, 383 MIIM_88E1121_PHY_LED_PAGE); 384 /* Configure leds */ 385 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL, 386 MIIM_88E1121_PHY_LED_DEF); 387 /* Restore the page pointer */ 388 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg); 389 390 /* Disable IRQs and de-assert interrupt */ 391 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0); 392 phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS); 393 394 return 0; 395 } 396 397 /* Marvell 88E1145 */ 398 static int m88e1145_config(struct phy_device *phydev) 399 { 400 int reg; 401 402 /* Errata E0, E1 */ 403 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b); 404 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f); 405 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016); 406 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da); 407 408 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR, 409 MIIM_88E1xxx_PHY_MDI_X_AUTO); 410 411 reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR); 412 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) 413 reg |= MIIM_M88E1145_RGMII_RX_DELAY | 414 MIIM_M88E1145_RGMII_TX_DELAY; 415 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); 416 417 genphy_config_aneg(phydev); 418 419 phy_reset(phydev); 420 421 return 0; 422 } 423 424 static int m88e1145_startup(struct phy_device *phydev) 425 { 426 int ret; 427 428 ret = genphy_update_link(phydev); 429 if (ret) 430 return ret; 431 432 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL, 433 MIIM_88E1145_PHY_LED_DIRECT); 434 return m88e1xxx_parse_status(phydev); 435 } 436 437 /* Marvell 88E1149S */ 438 static int m88e1149_config(struct phy_device *phydev) 439 { 440 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f); 441 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); 442 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5); 443 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); 444 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); 445 446 genphy_config_aneg(phydev); 447 448 phy_reset(phydev); 449 450 return 0; 451 } 452 453 /* Marvell 88E1310 */ 454 static int m88e1310_config(struct phy_device *phydev) 455 { 456 u16 reg; 457 458 /* LED link and activity */ 459 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003); 460 reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL); 461 reg = (reg & ~0xf) | 0x1; 462 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL, reg); 463 464 /* Set LED2/INT to INT mode, low active */ 465 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003); 466 reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN); 467 reg = (reg & 0x77ff) | 0x0880; 468 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN, reg); 469 470 /* Set RGMII delay */ 471 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0002); 472 reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL); 473 reg |= 0x0030; 474 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL, reg); 475 476 /* Ensure to return to page 0 */ 477 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0000); 478 479 genphy_config_aneg(phydev); 480 phy_reset(phydev); 481 482 return 0; 483 } 484 485 static struct phy_driver M88E1011S_driver = { 486 .name = "Marvell 88E1011S", 487 .uid = 0x1410c60, 488 .mask = 0xffffff0, 489 .features = PHY_GBIT_FEATURES, 490 .config = &m88e1011s_config, 491 .startup = &m88e1011s_startup, 492 .shutdown = &genphy_shutdown, 493 }; 494 495 static struct phy_driver M88E1111S_driver = { 496 .name = "Marvell 88E1111S", 497 .uid = 0x1410cc0, 498 .mask = 0xffffff0, 499 .features = PHY_GBIT_FEATURES, 500 .config = &m88e1111s_config, 501 .startup = &m88e1011s_startup, 502 .shutdown = &genphy_shutdown, 503 }; 504 505 static struct phy_driver M88E1118_driver = { 506 .name = "Marvell 88E1118", 507 .uid = 0x1410e10, 508 .mask = 0xffffff0, 509 .features = PHY_GBIT_FEATURES, 510 .config = &m88e1118_config, 511 .startup = &m88e1118_startup, 512 .shutdown = &genphy_shutdown, 513 }; 514 515 static struct phy_driver M88E1118R_driver = { 516 .name = "Marvell 88E1118R", 517 .uid = 0x1410e40, 518 .mask = 0xffffff0, 519 .features = PHY_GBIT_FEATURES, 520 .config = &m88e1118_config, 521 .startup = &m88e1118_startup, 522 .shutdown = &genphy_shutdown, 523 }; 524 525 static struct phy_driver M88E1121R_driver = { 526 .name = "Marvell 88E1121R", 527 .uid = 0x1410cb0, 528 .mask = 0xffffff0, 529 .features = PHY_GBIT_FEATURES, 530 .config = &m88e1121_config, 531 .startup = &genphy_startup, 532 .shutdown = &genphy_shutdown, 533 }; 534 535 static struct phy_driver M88E1145_driver = { 536 .name = "Marvell 88E1145", 537 .uid = 0x1410cd0, 538 .mask = 0xffffff0, 539 .features = PHY_GBIT_FEATURES, 540 .config = &m88e1145_config, 541 .startup = &m88e1145_startup, 542 .shutdown = &genphy_shutdown, 543 }; 544 545 static struct phy_driver M88E1149S_driver = { 546 .name = "Marvell 88E1149S", 547 .uid = 0x1410ca0, 548 .mask = 0xffffff0, 549 .features = PHY_GBIT_FEATURES, 550 .config = &m88e1149_config, 551 .startup = &m88e1011s_startup, 552 .shutdown = &genphy_shutdown, 553 }; 554 555 static struct phy_driver M88E1510_driver = { 556 .name = "Marvell 88E1510", 557 .uid = 0x1410dd0, 558 .mask = 0xffffff0, 559 .features = PHY_GBIT_FEATURES, 560 .config = &m88e1510_config, 561 .startup = &m88e1011s_startup, 562 .shutdown = &genphy_shutdown, 563 }; 564 565 static struct phy_driver M88E1518_driver = { 566 .name = "Marvell 88E1518", 567 .uid = 0x1410dd1, 568 .mask = 0xffffff0, 569 .features = PHY_GBIT_FEATURES, 570 .config = &m88e1518_config, 571 .startup = &m88e1011s_startup, 572 .shutdown = &genphy_shutdown, 573 }; 574 575 static struct phy_driver M88E1310_driver = { 576 .name = "Marvell 88E1310", 577 .uid = 0x01410e90, 578 .mask = 0xffffff0, 579 .features = PHY_GBIT_FEATURES, 580 .config = &m88e1310_config, 581 .startup = &m88e1011s_startup, 582 .shutdown = &genphy_shutdown, 583 }; 584 585 int phy_marvell_init(void) 586 { 587 phy_register(&M88E1310_driver); 588 phy_register(&M88E1149S_driver); 589 phy_register(&M88E1145_driver); 590 phy_register(&M88E1121R_driver); 591 phy_register(&M88E1118_driver); 592 phy_register(&M88E1118R_driver); 593 phy_register(&M88E1111S_driver); 594 phy_register(&M88E1011S_driver); 595 phy_register(&M88E1510_driver); 596 phy_register(&M88E1518_driver); 597 598 return 0; 599 } 600