xref: /openbmc/u-boot/drivers/net/ne2000_base.h (revision 345be0b2)
1 /*
2 Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
3 
4 Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
5 eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
6 are GPL, so this is, of course, GPL.
7 
8 
9 ==========================================================================
10 
11 	dev/dp83902a.h
12 
13 	National Semiconductor DP83902a ethernet chip
14 
15 ==========================================================================
16 ####ECOSGPLCOPYRIGHTBEGIN####
17  -------------------------------------------
18  This file is part of eCos, the Embedded Configurable Operating System.
19  Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
20 
21  eCos is free software; you can redistribute it and/or modify it under
22  the terms of the GNU General Public License as published by the Free
23  Software Foundation; either version 2 or (at your option) any later version.
24 
25  eCos is distributed in the hope that it will be useful, but WITHOUT ANY
26  WARRANTY; without even the implied warranty of MERCHANTABILITY or
27  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
28  for more details.
29 
30  You should have received a copy of the GNU General Public License along
31  with eCos; if not, write to the Free Software Foundation, Inc.,
32  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
33 
34  As a special exception, if other files instantiate templates or use macros
35  or inline functions from this file, or you compile this file and link it
36  with other works to produce a work based on this file, this file does not
37  by itself cause the resulting work to be covered by the GNU General Public
38  License. However the source code for this file must still be made available
39  in accordance with section (3) of the GNU General Public License.
40 
41  This exception does not invalidate any other reasons why a work based on
42  this file might be covered by the GNU General Public License.
43 
44  Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
45  at http://sources.redhat.com/ecos/ecos-license/
46  -------------------------------------------
47 ####ECOSGPLCOPYRIGHTEND####
48 ####BSDCOPYRIGHTBEGIN####
49 
50  -------------------------------------------
51 
52  Portions of this software may have been derived from OpenBSD or other sources,
53  and are covered by the appropriate copyright disclaimers included herein.
54 
55  -------------------------------------------
56 
57 ####BSDCOPYRIGHTEND####
58 ==========================================================================
59 #####DESCRIPTIONBEGIN####
60 
61  Author(s):	gthomas
62  Contributors:	gthomas, jskov
63  Date:		2001-06-13
64  Purpose:
65  Description:
66 
67 ####DESCRIPTIONEND####
68 
69 ==========================================================================
70 
71 */
72 
73 /*
74  ------------------------------------------------------------------------
75  Macros for accessing DP registers
76  These can be overridden by the platform header
77 */
78 
79 #ifndef __NE2000_BASE_H__
80 #define __NE2000_BASE_H__
81 
82 /*
83  * Debugging details
84  *
85  * Set to perms of:
86  * 0 disables all debug output
87  * 1 for process debug output
88  * 2 for added data IO output: get_reg, put_reg
89  * 4 for packet allocation/free output
90  * 8 for only startup status, so we can tell we're installed OK
91  */
92 #if 0
93 #define DEBUG 0xf
94 #else
95 #define DEBUG 0
96 #endif
97 
98 #if DEBUG & 1
99 #define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
100 #define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
101 #define PRINTK(args...) printf(args)
102 #else
103 #define DEBUG_FUNCTION() do {} while(0)
104 #define DEBUG_LINE() do {} while(0)
105 #define PRINTK(args...)
106 #endif
107 
108 /* timeout for tx/rx in s */
109 #define TOUT 5
110 /* Ether MAC address size */
111 #define ETHER_ADDR_LEN 6
112 
113 
114 #define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
115 #define CYGACC_CALL_IF_DELAY_US(X) udelay(X)
116 
117 /* H/W infomation struct */
118 typedef struct hw_info_t {
119 	u32 offset;
120 	u8 a0, a1, a2;
121 	u32 flags;
122 } hw_info_t;
123 
124 typedef struct dp83902a_priv_data {
125 	u8* base;
126 	u8* data;
127 	u8* reset;
128 	int tx_next;		/* First free Tx page */
129 	int tx_int;		/* Expecting interrupt from this buffer */
130 	int rx_next;		/* First free Rx page */
131 	int tx1, tx2;		/* Page numbers for Tx buffers */
132 	u32 tx1_key, tx2_key;	/* Used to ack when packet sent */
133 	int tx1_len, tx2_len;
134 	bool tx_started, running, hardwired_esa;
135 	u8 esa[6];
136 	void* plf_priv;
137 
138 	/* Buffer allocation */
139 	int tx_buf1, tx_buf2;
140 	int rx_buf_start, rx_buf_end;
141 } dp83902a_priv_data_t;
142 
143 /* ------------------------------------------------------------------------ */
144 /* Register offsets */
145 
146 #define DP_CR		0x00
147 #define DP_CLDA0	0x01
148 #define DP_PSTART	0x01	/* write */
149 #define DP_CLDA1	0x02
150 #define DP_PSTOP	0x02	/* write */
151 #define DP_BNDRY	0x03
152 #define DP_TSR		0x04
153 #define DP_TPSR		0x04	/* write */
154 #define DP_NCR		0x05
155 #define DP_TBCL		0x05	/* write */
156 #define DP_FIFO		0x06
157 #define DP_TBCH		0x06	/* write */
158 #define DP_ISR		0x07
159 #define DP_CRDA0	0x08
160 #define DP_RSAL		0x08	/* write */
161 #define DP_CRDA1	0x09
162 #define DP_RSAH		0x09	/* write */
163 #define DP_RBCL		0x0a	/* write */
164 #define DP_RBCH		0x0b	/* write */
165 #define DP_RSR		0x0c
166 #define DP_RCR		0x0c	/* write */
167 #define DP_FER		0x0d
168 #define DP_TCR		0x0d	/* write */
169 #define DP_CER		0x0e
170 #define DP_DCR		0x0e	/* write */
171 #define DP_MISSED	0x0f
172 #define DP_IMR		0x0f	/* write */
173 #define DP_DATAPORT	0x10	/* "eprom" data port */
174 
175 #define DP_P1_CR	0x00
176 #define DP_P1_PAR0	0x01
177 #define DP_P1_PAR1	0x02
178 #define DP_P1_PAR2	0x03
179 #define DP_P1_PAR3	0x04
180 #define DP_P1_PAR4	0x05
181 #define DP_P1_PAR5	0x06
182 #define DP_P1_CURP	0x07
183 #define DP_P1_MAR0	0x08
184 #define DP_P1_MAR1	0x09
185 #define DP_P1_MAR2	0x0a
186 #define DP_P1_MAR3	0x0b
187 #define DP_P1_MAR4	0x0c
188 #define DP_P1_MAR5	0x0d
189 #define DP_P1_MAR6	0x0e
190 #define DP_P1_MAR7	0x0f
191 
192 #define DP_P2_CR	0x00
193 #define DP_P2_PSTART	0x01
194 #define DP_P2_CLDA0	0x01	/* write */
195 #define DP_P2_PSTOP	0x02
196 #define DP_P2_CLDA1	0x02	/* write */
197 #define DP_P2_RNPP	0x03
198 #define DP_P2_TPSR	0x04
199 #define DP_P2_LNPP	0x05
200 #define DP_P2_ACH	0x06
201 #define DP_P2_ACL	0x07
202 #define DP_P2_RCR	0x0c
203 #define DP_P2_TCR	0x0d
204 #define DP_P2_DCR	0x0e
205 #define DP_P2_IMR	0x0f
206 
207 /* Command register - common to all pages */
208 
209 #define DP_CR_STOP	0x01	/* Stop: software reset */
210 #define DP_CR_START	0x02	/* Start: initialize device */
211 #define DP_CR_TXPKT	0x04	/* Transmit packet */
212 #define DP_CR_RDMA	0x08	/* Read DMA (recv data from device) */
213 #define DP_CR_WDMA	0x10	/* Write DMA (send data to device) */
214 #define DP_CR_SEND	0x18	/* Send packet */
215 #define DP_CR_NODMA	0x20	/* Remote (or no) DMA */
216 #define DP_CR_PAGE0	0x00	/* Page select */
217 #define DP_CR_PAGE1	0x40
218 #define DP_CR_PAGE2	0x80
219 #define DP_CR_PAGEMSK	0x3F	/* Used to mask out page bits */
220 
221 /* Data configuration register */
222 
223 #define DP_DCR_WTS	0x01	/* 1=16 bit word transfers */
224 #define DP_DCR_BOS	0x02	/* 1=Little Endian */
225 #define DP_DCR_LAS	0x04	/* 1=Single 32 bit DMA mode */
226 #define DP_DCR_LS	0x08	/* 1=normal mode, 0=loopback */
227 #define DP_DCR_ARM	0x10	/* 0=no send command (program I/O) */
228 #define DP_DCR_FIFO_1	0x00	/* FIFO threshold */
229 #define DP_DCR_FIFO_2	0x20
230 #define DP_DCR_FIFO_4	0x40
231 #define DP_DCR_FIFO_6	0x60
232 
233 #define DP_DCR_INIT	(DP_DCR_LS|DP_DCR_FIFO_4)
234 
235 /* Interrupt status register */
236 
237 #define DP_ISR_RxP	0x01	/* Packet received */
238 #define DP_ISR_TxP	0x02	/* Packet transmitted */
239 #define DP_ISR_RxE	0x04	/* Receive error */
240 #define DP_ISR_TxE	0x08	/* Transmit error */
241 #define DP_ISR_OFLW	0x10	/* Receive overflow */
242 #define DP_ISR_CNT	0x20	/* Tally counters need emptying */
243 #define DP_ISR_RDC	0x40	/* Remote DMA complete */
244 #define DP_ISR_RESET	0x80	/* Device has reset (shutdown, error) */
245 
246 /* Interrupt mask register */
247 
248 #define DP_IMR_RxP	0x01	/* Packet received */
249 #define DP_IMR_TxP	0x02	/* Packet transmitted */
250 #define DP_IMR_RxE	0x04	/* Receive error */
251 #define DP_IMR_TxE	0x08	/* Transmit error */
252 #define DP_IMR_OFLW	0x10	/* Receive overflow */
253 #define DP_IMR_CNT	0x20	/* Tall counters need emptying */
254 #define DP_IMR_RDC	0x40	/* Remote DMA complete */
255 
256 #define DP_IMR_All	0x3F	/* Everything but remote DMA */
257 
258 /* Receiver control register */
259 
260 #define DP_RCR_SEP	0x01	/* Save bad(error) packets */
261 #define DP_RCR_AR	0x02	/* Accept runt packets */
262 #define DP_RCR_AB	0x04	/* Accept broadcast packets */
263 #define DP_RCR_AM	0x08	/* Accept multicast packets */
264 #define DP_RCR_PROM	0x10	/* Promiscuous mode */
265 #define DP_RCR_MON	0x20	/* Monitor mode - 1=accept no packets */
266 
267 /* Receiver status register */
268 
269 #define DP_RSR_RxP	0x01	/* Packet received */
270 #define DP_RSR_CRC	0x02	/* CRC error */
271 #define DP_RSR_FRAME	0x04	/* Framing error */
272 #define DP_RSR_FO	0x08	/* FIFO overrun */
273 #define DP_RSR_MISS	0x10	/* Missed packet */
274 #define DP_RSR_PHY	0x20	/* 0=pad match, 1=mad match */
275 #define DP_RSR_DIS	0x40	/* Receiver disabled */
276 #define DP_RSR_DFR	0x80	/* Receiver processing deferred */
277 
278 /* Transmitter control register */
279 
280 #define DP_TCR_NOCRC	0x01	/* 1=inhibit CRC */
281 #define DP_TCR_NORMAL	0x00	/* Normal transmitter operation */
282 #define DP_TCR_LOCAL	0x02	/* Internal NIC loopback */
283 #define DP_TCR_INLOOP	0x04	/* Full internal loopback */
284 #define DP_TCR_OUTLOOP	0x08	/* External loopback */
285 #define DP_TCR_ATD	0x10	/* Auto transmit disable */
286 #define DP_TCR_OFFSET	0x20	/* Collision offset adjust */
287 
288 /* Transmit status register */
289 
290 #define DP_TSR_TxP	0x01	/* Packet transmitted */
291 #define DP_TSR_COL	0x04	/* Collision (at least one) */
292 #define DP_TSR_ABT	0x08	/* Aborted because of too many collisions */
293 #define DP_TSR_CRS	0x10	/* Lost carrier */
294 #define DP_TSR_FU	0x20	/* FIFO underrun */
295 #define DP_TSR_CDH	0x40	/* Collision Detect Heartbeat */
296 #define DP_TSR_OWC	0x80	/* Collision outside normal window */
297 
298 #define IEEE_8023_MAX_FRAME	1518	/* Largest possible ethernet frame */
299 #define IEEE_8023_MIN_FRAME	64	/* Smallest possible ethernet frame */
300 
301 /* Functions */
302 int get_prom(u8* mac_addr, u8* base_addr);
303 
304 #endif /* __NE2000_BASE_H__ */
305