1 /* 2 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs. 3 * 4 * U-Boot version: 5 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de> 6 * 7 * Based on the Linux version which is: 8 * Copyright (C) 2012 Marvell 9 * 10 * Rami Rosen <rosenr@marvell.com> 11 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 12 * 13 * SPDX-License-Identifier: GPL-2.0 14 */ 15 16 #include <common.h> 17 #include <dm.h> 18 #include <net.h> 19 #include <netdev.h> 20 #include <config.h> 21 #include <malloc.h> 22 #include <asm/io.h> 23 #include <linux/errno.h> 24 #include <phy.h> 25 #include <miiphy.h> 26 #include <watchdog.h> 27 #include <asm/arch/cpu.h> 28 #include <asm/arch/soc.h> 29 #include <linux/compat.h> 30 #include <linux/mbus.h> 31 32 DECLARE_GLOBAL_DATA_PTR; 33 34 #if !defined(CONFIG_PHYLIB) 35 # error Marvell mvneta requires PHYLIB 36 #endif 37 38 /* Some linux -> U-Boot compatibility stuff */ 39 #define netdev_err(dev, fmt, args...) \ 40 printf(fmt, ##args) 41 #define netdev_warn(dev, fmt, args...) \ 42 printf(fmt, ##args) 43 #define netdev_info(dev, fmt, args...) \ 44 printf(fmt, ##args) 45 46 #define CONFIG_NR_CPUS 1 47 #define ETH_HLEN 14 /* Total octets in header */ 48 49 /* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */ 50 #define WRAP (2 + ETH_HLEN + 4 + 32) 51 #define MTU 1500 52 #define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN)) 53 54 #define MVNETA_SMI_TIMEOUT 10000 55 56 /* Registers */ 57 #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) 58 #define MVNETA_RXQ_HW_BUF_ALLOC BIT(1) 59 #define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8) 60 #define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8) 61 #define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2)) 62 #define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16) 63 #define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2)) 64 #define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2)) 65 #define MVNETA_RXQ_BUF_SIZE_SHIFT 19 66 #define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19) 67 #define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2)) 68 #define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff 69 #define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2)) 70 #define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16 71 #define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255 72 #define MVNETA_PORT_RX_RESET 0x1cc0 73 #define MVNETA_PORT_RX_DMA_RESET BIT(0) 74 #define MVNETA_PHY_ADDR 0x2000 75 #define MVNETA_PHY_ADDR_MASK 0x1f 76 #define MVNETA_SMI 0x2004 77 #define MVNETA_PHY_REG_MASK 0x1f 78 /* SMI register fields */ 79 #define MVNETA_SMI_DATA_OFFS 0 /* Data */ 80 #define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS) 81 #define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ 82 #define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/ 83 #define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ 84 #define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS) 85 #define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */ 86 #define MVNETA_SMI_BUSY (1 << 28) /* Busy */ 87 #define MVNETA_MBUS_RETRY 0x2010 88 #define MVNETA_UNIT_INTR_CAUSE 0x2080 89 #define MVNETA_UNIT_CONTROL 0x20B0 90 #define MVNETA_PHY_POLLING_ENABLE BIT(1) 91 #define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3)) 92 #define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3)) 93 #define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2)) 94 #define MVNETA_WIN_SIZE_MASK (0xffff0000) 95 #define MVNETA_BASE_ADDR_ENABLE 0x2290 96 #define MVNETA_BASE_ADDR_ENABLE_BIT 0x1 97 #define MVNETA_PORT_ACCESS_PROTECT 0x2294 98 #define MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3 99 #define MVNETA_PORT_CONFIG 0x2400 100 #define MVNETA_UNI_PROMISC_MODE BIT(0) 101 #define MVNETA_DEF_RXQ(q) ((q) << 1) 102 #define MVNETA_DEF_RXQ_ARP(q) ((q) << 4) 103 #define MVNETA_TX_UNSET_ERR_SUM BIT(12) 104 #define MVNETA_DEF_RXQ_TCP(q) ((q) << 16) 105 #define MVNETA_DEF_RXQ_UDP(q) ((q) << 19) 106 #define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22) 107 #define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25) 108 #define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \ 109 MVNETA_DEF_RXQ_ARP(q) | \ 110 MVNETA_DEF_RXQ_TCP(q) | \ 111 MVNETA_DEF_RXQ_UDP(q) | \ 112 MVNETA_DEF_RXQ_BPDU(q) | \ 113 MVNETA_TX_UNSET_ERR_SUM | \ 114 MVNETA_RX_CSUM_WITH_PSEUDO_HDR) 115 #define MVNETA_PORT_CONFIG_EXTEND 0x2404 116 #define MVNETA_MAC_ADDR_LOW 0x2414 117 #define MVNETA_MAC_ADDR_HIGH 0x2418 118 #define MVNETA_SDMA_CONFIG 0x241c 119 #define MVNETA_SDMA_BRST_SIZE_16 4 120 #define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1) 121 #define MVNETA_RX_NO_DATA_SWAP BIT(4) 122 #define MVNETA_TX_NO_DATA_SWAP BIT(5) 123 #define MVNETA_DESC_SWAP BIT(6) 124 #define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22) 125 #define MVNETA_PORT_STATUS 0x2444 126 #define MVNETA_TX_IN_PRGRS BIT(1) 127 #define MVNETA_TX_FIFO_EMPTY BIT(8) 128 #define MVNETA_RX_MIN_FRAME_SIZE 0x247c 129 #define MVNETA_SERDES_CFG 0x24A0 130 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 131 #define MVNETA_QSGMII_SERDES_PROTO 0x0667 132 #define MVNETA_TYPE_PRIO 0x24bc 133 #define MVNETA_FORCE_UNI BIT(21) 134 #define MVNETA_TXQ_CMD_1 0x24e4 135 #define MVNETA_TXQ_CMD 0x2448 136 #define MVNETA_TXQ_DISABLE_SHIFT 8 137 #define MVNETA_TXQ_ENABLE_MASK 0x000000ff 138 #define MVNETA_ACC_MODE 0x2500 139 #define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2)) 140 #define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff 141 #define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00 142 #define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2)) 143 144 /* Exception Interrupt Port/Queue Cause register */ 145 146 #define MVNETA_INTR_NEW_CAUSE 0x25a0 147 #define MVNETA_INTR_NEW_MASK 0x25a4 148 149 /* bits 0..7 = TXQ SENT, one bit per queue. 150 * bits 8..15 = RXQ OCCUP, one bit per queue. 151 * bits 16..23 = RXQ FREE, one bit per queue. 152 * bit 29 = OLD_REG_SUM, see old reg ? 153 * bit 30 = TX_ERR_SUM, one bit for 4 ports 154 * bit 31 = MISC_SUM, one bit for 4 ports 155 */ 156 #define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0) 157 #define MVNETA_TX_INTR_MASK_ALL (0xff << 0) 158 #define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8) 159 #define MVNETA_RX_INTR_MASK_ALL (0xff << 8) 160 161 #define MVNETA_INTR_OLD_CAUSE 0x25a8 162 #define MVNETA_INTR_OLD_MASK 0x25ac 163 164 /* Data Path Port/Queue Cause Register */ 165 #define MVNETA_INTR_MISC_CAUSE 0x25b0 166 #define MVNETA_INTR_MISC_MASK 0x25b4 167 #define MVNETA_INTR_ENABLE 0x25b8 168 169 #define MVNETA_RXQ_CMD 0x2680 170 #define MVNETA_RXQ_DISABLE_SHIFT 8 171 #define MVNETA_RXQ_ENABLE_MASK 0x000000ff 172 #define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4)) 173 #define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4)) 174 #define MVNETA_GMAC_CTRL_0 0x2c00 175 #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2 176 #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc 177 #define MVNETA_GMAC0_PORT_ENABLE BIT(0) 178 #define MVNETA_GMAC_CTRL_2 0x2c08 179 #define MVNETA_GMAC2_PCS_ENABLE BIT(3) 180 #define MVNETA_GMAC2_PORT_RGMII BIT(4) 181 #define MVNETA_GMAC2_PORT_RESET BIT(6) 182 #define MVNETA_GMAC_STATUS 0x2c10 183 #define MVNETA_GMAC_LINK_UP BIT(0) 184 #define MVNETA_GMAC_SPEED_1000 BIT(1) 185 #define MVNETA_GMAC_SPEED_100 BIT(2) 186 #define MVNETA_GMAC_FULL_DUPLEX BIT(3) 187 #define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4) 188 #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5) 189 #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6) 190 #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7) 191 #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c 192 #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0) 193 #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1) 194 #define MVNETA_GMAC_FORCE_LINK_UP (BIT(0) | BIT(1)) 195 #define MVNETA_GMAC_IB_BYPASS_AN_EN BIT(3) 196 #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5) 197 #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6) 198 #define MVNETA_GMAC_AN_SPEED_EN BIT(7) 199 #define MVNETA_GMAC_SET_FC_EN BIT(8) 200 #define MVNETA_GMAC_ADVERT_FC_EN BIT(9) 201 #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) 202 #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) 203 #define MVNETA_GMAC_SAMPLE_TX_CFG_EN BIT(15) 204 #define MVNETA_MIB_COUNTERS_BASE 0x3080 205 #define MVNETA_MIB_LATE_COLLISION 0x7c 206 #define MVNETA_DA_FILT_SPEC_MCAST 0x3400 207 #define MVNETA_DA_FILT_OTH_MCAST 0x3500 208 #define MVNETA_DA_FILT_UCAST_BASE 0x3600 209 #define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2)) 210 #define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2)) 211 #define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000 212 #define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16) 213 #define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2)) 214 #define MVNETA_TXQ_DEC_SENT_SHIFT 16 215 #define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2)) 216 #define MVNETA_TXQ_SENT_DESC_SHIFT 16 217 #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000 218 #define MVNETA_PORT_TX_RESET 0x3cf0 219 #define MVNETA_PORT_TX_DMA_RESET BIT(0) 220 #define MVNETA_TX_MTU 0x3e0c 221 #define MVNETA_TX_TOKEN_SIZE 0x3e14 222 #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff 223 #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) 224 #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff 225 226 /* Descriptor ring Macros */ 227 #define MVNETA_QUEUE_NEXT_DESC(q, index) \ 228 (((index) < (q)->last_desc) ? ((index) + 1) : 0) 229 230 /* Various constants */ 231 232 /* Coalescing */ 233 #define MVNETA_TXDONE_COAL_PKTS 16 234 #define MVNETA_RX_COAL_PKTS 32 235 #define MVNETA_RX_COAL_USEC 100 236 237 /* The two bytes Marvell header. Either contains a special value used 238 * by Marvell switches when a specific hardware mode is enabled (not 239 * supported by this driver) or is filled automatically by zeroes on 240 * the RX side. Those two bytes being at the front of the Ethernet 241 * header, they allow to have the IP header aligned on a 4 bytes 242 * boundary automatically: the hardware skips those two bytes on its 243 * own. 244 */ 245 #define MVNETA_MH_SIZE 2 246 247 #define MVNETA_VLAN_TAG_LEN 4 248 249 #define MVNETA_CPU_D_CACHE_LINE_SIZE 32 250 #define MVNETA_TX_CSUM_MAX_SIZE 9800 251 #define MVNETA_ACC_MODE_EXT 1 252 253 /* Timeout constants */ 254 #define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000 255 #define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000 256 #define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000 257 258 #define MVNETA_TX_MTU_MAX 0x3ffff 259 260 /* Max number of Rx descriptors */ 261 #define MVNETA_MAX_RXD 16 262 263 /* Max number of Tx descriptors */ 264 #define MVNETA_MAX_TXD 16 265 266 /* descriptor aligned size */ 267 #define MVNETA_DESC_ALIGNED_SIZE 32 268 269 struct mvneta_port { 270 void __iomem *base; 271 struct mvneta_rx_queue *rxqs; 272 struct mvneta_tx_queue *txqs; 273 274 u8 mcast_count[256]; 275 u16 tx_ring_size; 276 u16 rx_ring_size; 277 278 phy_interface_t phy_interface; 279 unsigned int link; 280 unsigned int duplex; 281 unsigned int speed; 282 283 int init; 284 int phyaddr; 285 struct phy_device *phydev; 286 struct mii_dev *bus; 287 }; 288 289 /* The mvneta_tx_desc and mvneta_rx_desc structures describe the 290 * layout of the transmit and reception DMA descriptors, and their 291 * layout is therefore defined by the hardware design 292 */ 293 294 #define MVNETA_TX_L3_OFF_SHIFT 0 295 #define MVNETA_TX_IP_HLEN_SHIFT 8 296 #define MVNETA_TX_L4_UDP BIT(16) 297 #define MVNETA_TX_L3_IP6 BIT(17) 298 #define MVNETA_TXD_IP_CSUM BIT(18) 299 #define MVNETA_TXD_Z_PAD BIT(19) 300 #define MVNETA_TXD_L_DESC BIT(20) 301 #define MVNETA_TXD_F_DESC BIT(21) 302 #define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \ 303 MVNETA_TXD_L_DESC | \ 304 MVNETA_TXD_F_DESC) 305 #define MVNETA_TX_L4_CSUM_FULL BIT(30) 306 #define MVNETA_TX_L4_CSUM_NOT BIT(31) 307 308 #define MVNETA_RXD_ERR_CRC 0x0 309 #define MVNETA_RXD_ERR_SUMMARY BIT(16) 310 #define MVNETA_RXD_ERR_OVERRUN BIT(17) 311 #define MVNETA_RXD_ERR_LEN BIT(18) 312 #define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18)) 313 #define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18)) 314 #define MVNETA_RXD_L3_IP4 BIT(25) 315 #define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27)) 316 #define MVNETA_RXD_L4_CSUM_OK BIT(30) 317 318 struct mvneta_tx_desc { 319 u32 command; /* Options used by HW for packet transmitting.*/ 320 u16 reserverd1; /* csum_l4 (for future use) */ 321 u16 data_size; /* Data size of transmitted packet in bytes */ 322 u32 buf_phys_addr; /* Physical addr of transmitted buffer */ 323 u32 reserved2; /* hw_cmd - (for future use, PMT) */ 324 u32 reserved3[4]; /* Reserved - (for future use) */ 325 }; 326 327 struct mvneta_rx_desc { 328 u32 status; /* Info about received packet */ 329 u16 reserved1; /* pnc_info - (for future use, PnC) */ 330 u16 data_size; /* Size of received packet in bytes */ 331 332 u32 buf_phys_addr; /* Physical address of the buffer */ 333 u32 reserved2; /* pnc_flow_id (for future use, PnC) */ 334 335 u32 buf_cookie; /* cookie for access to RX buffer in rx path */ 336 u16 reserved3; /* prefetch_cmd, for future use */ 337 u16 reserved4; /* csum_l4 - (for future use, PnC) */ 338 339 u32 reserved5; /* pnc_extra PnC (for future use, PnC) */ 340 u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */ 341 }; 342 343 struct mvneta_tx_queue { 344 /* Number of this TX queue, in the range 0-7 */ 345 u8 id; 346 347 /* Number of TX DMA descriptors in the descriptor ring */ 348 int size; 349 350 /* Index of last TX DMA descriptor that was inserted */ 351 int txq_put_index; 352 353 /* Index of the TX DMA descriptor to be cleaned up */ 354 int txq_get_index; 355 356 /* Virtual address of the TX DMA descriptors array */ 357 struct mvneta_tx_desc *descs; 358 359 /* DMA address of the TX DMA descriptors array */ 360 dma_addr_t descs_phys; 361 362 /* Index of the last TX DMA descriptor */ 363 int last_desc; 364 365 /* Index of the next TX DMA descriptor to process */ 366 int next_desc_to_proc; 367 }; 368 369 struct mvneta_rx_queue { 370 /* rx queue number, in the range 0-7 */ 371 u8 id; 372 373 /* num of rx descriptors in the rx descriptor ring */ 374 int size; 375 376 /* Virtual address of the RX DMA descriptors array */ 377 struct mvneta_rx_desc *descs; 378 379 /* DMA address of the RX DMA descriptors array */ 380 dma_addr_t descs_phys; 381 382 /* Index of the last RX DMA descriptor */ 383 int last_desc; 384 385 /* Index of the next RX DMA descriptor to process */ 386 int next_desc_to_proc; 387 }; 388 389 /* U-Boot doesn't use the queues, so set the number to 1 */ 390 static int rxq_number = 1; 391 static int txq_number = 1; 392 static int rxq_def; 393 394 struct buffer_location { 395 struct mvneta_tx_desc *tx_descs; 396 struct mvneta_rx_desc *rx_descs; 397 u32 rx_buffers; 398 }; 399 400 /* 401 * All 4 interfaces use the same global buffer, since only one interface 402 * can be enabled at once 403 */ 404 static struct buffer_location buffer_loc; 405 406 /* 407 * Page table entries are set to 1MB, or multiples of 1MB 408 * (not < 1MB). driver uses less bd's so use 1MB bdspace. 409 */ 410 #define BD_SPACE (1 << 20) 411 412 /* 413 * Dummy implementation that can be overwritten by a board 414 * specific function 415 */ 416 __weak int board_network_enable(struct mii_dev *bus) 417 { 418 return 0; 419 } 420 421 /* Utility/helper methods */ 422 423 /* Write helper method */ 424 static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data) 425 { 426 writel(data, pp->base + offset); 427 } 428 429 /* Read helper method */ 430 static u32 mvreg_read(struct mvneta_port *pp, u32 offset) 431 { 432 return readl(pp->base + offset); 433 } 434 435 /* Clear all MIB counters */ 436 static void mvneta_mib_counters_clear(struct mvneta_port *pp) 437 { 438 int i; 439 440 /* Perform dummy reads from MIB counters */ 441 for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4) 442 mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i)); 443 } 444 445 /* Rx descriptors helper methods */ 446 447 /* Checks whether the RX descriptor having this status is both the first 448 * and the last descriptor for the RX packet. Each RX packet is currently 449 * received through a single RX descriptor, so not having each RX 450 * descriptor with its first and last bits set is an error 451 */ 452 static int mvneta_rxq_desc_is_first_last(u32 status) 453 { 454 return (status & MVNETA_RXD_FIRST_LAST_DESC) == 455 MVNETA_RXD_FIRST_LAST_DESC; 456 } 457 458 /* Add number of descriptors ready to receive new packets */ 459 static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp, 460 struct mvneta_rx_queue *rxq, 461 int ndescs) 462 { 463 /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can 464 * be added at once 465 */ 466 while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) { 467 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), 468 (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX << 469 MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); 470 ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX; 471 } 472 473 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), 474 (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); 475 } 476 477 /* Get number of RX descriptors occupied by received packets */ 478 static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp, 479 struct mvneta_rx_queue *rxq) 480 { 481 u32 val; 482 483 val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id)); 484 return val & MVNETA_RXQ_OCCUPIED_ALL_MASK; 485 } 486 487 /* Update num of rx desc called upon return from rx path or 488 * from mvneta_rxq_drop_pkts(). 489 */ 490 static void mvneta_rxq_desc_num_update(struct mvneta_port *pp, 491 struct mvneta_rx_queue *rxq, 492 int rx_done, int rx_filled) 493 { 494 u32 val; 495 496 if ((rx_done <= 0xff) && (rx_filled <= 0xff)) { 497 val = rx_done | 498 (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT); 499 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); 500 return; 501 } 502 503 /* Only 255 descriptors can be added at once */ 504 while ((rx_done > 0) || (rx_filled > 0)) { 505 if (rx_done <= 0xff) { 506 val = rx_done; 507 rx_done = 0; 508 } else { 509 val = 0xff; 510 rx_done -= 0xff; 511 } 512 if (rx_filled <= 0xff) { 513 val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; 514 rx_filled = 0; 515 } else { 516 val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; 517 rx_filled -= 0xff; 518 } 519 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); 520 } 521 } 522 523 /* Get pointer to next RX descriptor to be processed by SW */ 524 static struct mvneta_rx_desc * 525 mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq) 526 { 527 int rx_desc = rxq->next_desc_to_proc; 528 529 rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc); 530 return rxq->descs + rx_desc; 531 } 532 533 /* Tx descriptors helper methods */ 534 535 /* Update HW with number of TX descriptors to be sent */ 536 static void mvneta_txq_pend_desc_add(struct mvneta_port *pp, 537 struct mvneta_tx_queue *txq, 538 int pend_desc) 539 { 540 u32 val; 541 542 /* Only 255 descriptors can be added at once ; Assume caller 543 * process TX desriptors in quanta less than 256 544 */ 545 val = pend_desc; 546 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 547 } 548 549 /* Get pointer to next TX descriptor to be processed (send) by HW */ 550 static struct mvneta_tx_desc * 551 mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq) 552 { 553 int tx_desc = txq->next_desc_to_proc; 554 555 txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc); 556 return txq->descs + tx_desc; 557 } 558 559 /* Set rxq buf size */ 560 static void mvneta_rxq_buf_size_set(struct mvneta_port *pp, 561 struct mvneta_rx_queue *rxq, 562 int buf_size) 563 { 564 u32 val; 565 566 val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id)); 567 568 val &= ~MVNETA_RXQ_BUF_SIZE_MASK; 569 val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT); 570 571 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val); 572 } 573 574 static int mvneta_port_is_fixed_link(struct mvneta_port *pp) 575 { 576 /* phy_addr is set to invalid value for fixed link */ 577 return pp->phyaddr > PHY_MAX_ADDR; 578 } 579 580 581 /* Start the Ethernet port RX and TX activity */ 582 static void mvneta_port_up(struct mvneta_port *pp) 583 { 584 int queue; 585 u32 q_map; 586 587 /* Enable all initialized TXs. */ 588 mvneta_mib_counters_clear(pp); 589 q_map = 0; 590 for (queue = 0; queue < txq_number; queue++) { 591 struct mvneta_tx_queue *txq = &pp->txqs[queue]; 592 if (txq->descs != NULL) 593 q_map |= (1 << queue); 594 } 595 mvreg_write(pp, MVNETA_TXQ_CMD, q_map); 596 597 /* Enable all initialized RXQs. */ 598 q_map = 0; 599 for (queue = 0; queue < rxq_number; queue++) { 600 struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; 601 if (rxq->descs != NULL) 602 q_map |= (1 << queue); 603 } 604 mvreg_write(pp, MVNETA_RXQ_CMD, q_map); 605 } 606 607 /* Stop the Ethernet port activity */ 608 static void mvneta_port_down(struct mvneta_port *pp) 609 { 610 u32 val; 611 int count; 612 613 /* Stop Rx port activity. Check port Rx activity. */ 614 val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK; 615 616 /* Issue stop command for active channels only */ 617 if (val != 0) 618 mvreg_write(pp, MVNETA_RXQ_CMD, 619 val << MVNETA_RXQ_DISABLE_SHIFT); 620 621 /* Wait for all Rx activity to terminate. */ 622 count = 0; 623 do { 624 if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) { 625 netdev_warn(pp->dev, 626 "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n", 627 val); 628 break; 629 } 630 mdelay(1); 631 632 val = mvreg_read(pp, MVNETA_RXQ_CMD); 633 } while (val & 0xff); 634 635 /* Stop Tx port activity. Check port Tx activity. Issue stop 636 * command for active channels only 637 */ 638 val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK; 639 640 if (val != 0) 641 mvreg_write(pp, MVNETA_TXQ_CMD, 642 (val << MVNETA_TXQ_DISABLE_SHIFT)); 643 644 /* Wait for all Tx activity to terminate. */ 645 count = 0; 646 do { 647 if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) { 648 netdev_warn(pp->dev, 649 "TIMEOUT for TX stopped status=0x%08x\n", 650 val); 651 break; 652 } 653 mdelay(1); 654 655 /* Check TX Command reg that all Txqs are stopped */ 656 val = mvreg_read(pp, MVNETA_TXQ_CMD); 657 658 } while (val & 0xff); 659 660 /* Double check to verify that TX FIFO is empty */ 661 count = 0; 662 do { 663 if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) { 664 netdev_warn(pp->dev, 665 "TX FIFO empty timeout status=0x08%x\n", 666 val); 667 break; 668 } 669 mdelay(1); 670 671 val = mvreg_read(pp, MVNETA_PORT_STATUS); 672 } while (!(val & MVNETA_TX_FIFO_EMPTY) && 673 (val & MVNETA_TX_IN_PRGRS)); 674 675 udelay(200); 676 } 677 678 /* Enable the port by setting the port enable bit of the MAC control register */ 679 static void mvneta_port_enable(struct mvneta_port *pp) 680 { 681 u32 val; 682 683 /* Enable port */ 684 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); 685 val |= MVNETA_GMAC0_PORT_ENABLE; 686 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); 687 } 688 689 /* Disable the port and wait for about 200 usec before retuning */ 690 static void mvneta_port_disable(struct mvneta_port *pp) 691 { 692 u32 val; 693 694 /* Reset the Enable bit in the Serial Control Register */ 695 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); 696 val &= ~MVNETA_GMAC0_PORT_ENABLE; 697 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); 698 699 udelay(200); 700 } 701 702 /* Multicast tables methods */ 703 704 /* Set all entries in Unicast MAC Table; queue==-1 means reject all */ 705 static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue) 706 { 707 int offset; 708 u32 val; 709 710 if (queue == -1) { 711 val = 0; 712 } else { 713 val = 0x1 | (queue << 1); 714 val |= (val << 24) | (val << 16) | (val << 8); 715 } 716 717 for (offset = 0; offset <= 0xc; offset += 4) 718 mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val); 719 } 720 721 /* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */ 722 static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue) 723 { 724 int offset; 725 u32 val; 726 727 if (queue == -1) { 728 val = 0; 729 } else { 730 val = 0x1 | (queue << 1); 731 val |= (val << 24) | (val << 16) | (val << 8); 732 } 733 734 for (offset = 0; offset <= 0xfc; offset += 4) 735 mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val); 736 } 737 738 /* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */ 739 static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue) 740 { 741 int offset; 742 u32 val; 743 744 if (queue == -1) { 745 memset(pp->mcast_count, 0, sizeof(pp->mcast_count)); 746 val = 0; 747 } else { 748 memset(pp->mcast_count, 1, sizeof(pp->mcast_count)); 749 val = 0x1 | (queue << 1); 750 val |= (val << 24) | (val << 16) | (val << 8); 751 } 752 753 for (offset = 0; offset <= 0xfc; offset += 4) 754 mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val); 755 } 756 757 /* This method sets defaults to the NETA port: 758 * Clears interrupt Cause and Mask registers. 759 * Clears all MAC tables. 760 * Sets defaults to all registers. 761 * Resets RX and TX descriptor rings. 762 * Resets PHY. 763 * This method can be called after mvneta_port_down() to return the port 764 * settings to defaults. 765 */ 766 static void mvneta_defaults_set(struct mvneta_port *pp) 767 { 768 int cpu; 769 int queue; 770 u32 val; 771 772 /* Clear all Cause registers */ 773 mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0); 774 mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0); 775 mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); 776 777 /* Mask all interrupts */ 778 mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0); 779 mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0); 780 mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0); 781 mvreg_write(pp, MVNETA_INTR_ENABLE, 0); 782 783 /* Enable MBUS Retry bit16 */ 784 mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20); 785 786 /* Set CPU queue access map - all CPUs have access to all RX 787 * queues and to all TX queues 788 */ 789 for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) 790 mvreg_write(pp, MVNETA_CPU_MAP(cpu), 791 (MVNETA_CPU_RXQ_ACCESS_ALL_MASK | 792 MVNETA_CPU_TXQ_ACCESS_ALL_MASK)); 793 794 /* Reset RX and TX DMAs */ 795 mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET); 796 mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET); 797 798 /* Disable Legacy WRR, Disable EJP, Release from reset */ 799 mvreg_write(pp, MVNETA_TXQ_CMD_1, 0); 800 for (queue = 0; queue < txq_number; queue++) { 801 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0); 802 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0); 803 } 804 805 mvreg_write(pp, MVNETA_PORT_TX_RESET, 0); 806 mvreg_write(pp, MVNETA_PORT_RX_RESET, 0); 807 808 /* Set Port Acceleration Mode */ 809 val = MVNETA_ACC_MODE_EXT; 810 mvreg_write(pp, MVNETA_ACC_MODE, val); 811 812 /* Update val of portCfg register accordingly with all RxQueue types */ 813 val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def); 814 mvreg_write(pp, MVNETA_PORT_CONFIG, val); 815 816 val = 0; 817 mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val); 818 mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64); 819 820 /* Build PORT_SDMA_CONFIG_REG */ 821 val = 0; 822 823 /* Default burst size */ 824 val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); 825 val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); 826 val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP; 827 828 /* Assign port SDMA configuration */ 829 mvreg_write(pp, MVNETA_SDMA_CONFIG, val); 830 831 /* Enable PHY polling in hardware if not in fixed-link mode */ 832 if (!mvneta_port_is_fixed_link(pp)) { 833 val = mvreg_read(pp, MVNETA_UNIT_CONTROL); 834 val |= MVNETA_PHY_POLLING_ENABLE; 835 mvreg_write(pp, MVNETA_UNIT_CONTROL, val); 836 } 837 838 mvneta_set_ucast_table(pp, -1); 839 mvneta_set_special_mcast_table(pp, -1); 840 mvneta_set_other_mcast_table(pp, -1); 841 } 842 843 /* Set unicast address */ 844 static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble, 845 int queue) 846 { 847 unsigned int unicast_reg; 848 unsigned int tbl_offset; 849 unsigned int reg_offset; 850 851 /* Locate the Unicast table entry */ 852 last_nibble = (0xf & last_nibble); 853 854 /* offset from unicast tbl base */ 855 tbl_offset = (last_nibble / 4) * 4; 856 857 /* offset within the above reg */ 858 reg_offset = last_nibble % 4; 859 860 unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset)); 861 862 if (queue == -1) { 863 /* Clear accepts frame bit at specified unicast DA tbl entry */ 864 unicast_reg &= ~(0xff << (8 * reg_offset)); 865 } else { 866 unicast_reg &= ~(0xff << (8 * reg_offset)); 867 unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset)); 868 } 869 870 mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg); 871 } 872 873 /* Set mac address */ 874 static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr, 875 int queue) 876 { 877 unsigned int mac_h; 878 unsigned int mac_l; 879 880 if (queue != -1) { 881 mac_l = (addr[4] << 8) | (addr[5]); 882 mac_h = (addr[0] << 24) | (addr[1] << 16) | 883 (addr[2] << 8) | (addr[3] << 0); 884 885 mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l); 886 mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h); 887 } 888 889 /* Accept frames of this address */ 890 mvneta_set_ucast_addr(pp, addr[5], queue); 891 } 892 893 /* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */ 894 static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc, 895 u32 phys_addr, u32 cookie) 896 { 897 rx_desc->buf_cookie = cookie; 898 rx_desc->buf_phys_addr = phys_addr; 899 } 900 901 /* Decrement sent descriptors counter */ 902 static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp, 903 struct mvneta_tx_queue *txq, 904 int sent_desc) 905 { 906 u32 val; 907 908 /* Only 255 TX descriptors can be updated at once */ 909 while (sent_desc > 0xff) { 910 val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT; 911 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 912 sent_desc = sent_desc - 0xff; 913 } 914 915 val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT; 916 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 917 } 918 919 /* Get number of TX descriptors already sent by HW */ 920 static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp, 921 struct mvneta_tx_queue *txq) 922 { 923 u32 val; 924 int sent_desc; 925 926 val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id)); 927 sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >> 928 MVNETA_TXQ_SENT_DESC_SHIFT; 929 930 return sent_desc; 931 } 932 933 /* Display more error info */ 934 static void mvneta_rx_error(struct mvneta_port *pp, 935 struct mvneta_rx_desc *rx_desc) 936 { 937 u32 status = rx_desc->status; 938 939 if (!mvneta_rxq_desc_is_first_last(status)) { 940 netdev_err(pp->dev, 941 "bad rx status %08x (buffer oversize), size=%d\n", 942 status, rx_desc->data_size); 943 return; 944 } 945 946 switch (status & MVNETA_RXD_ERR_CODE_MASK) { 947 case MVNETA_RXD_ERR_CRC: 948 netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n", 949 status, rx_desc->data_size); 950 break; 951 case MVNETA_RXD_ERR_OVERRUN: 952 netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n", 953 status, rx_desc->data_size); 954 break; 955 case MVNETA_RXD_ERR_LEN: 956 netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n", 957 status, rx_desc->data_size); 958 break; 959 case MVNETA_RXD_ERR_RESOURCE: 960 netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n", 961 status, rx_desc->data_size); 962 break; 963 } 964 } 965 966 static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp, 967 int rxq) 968 { 969 return &pp->rxqs[rxq]; 970 } 971 972 973 /* Drop packets received by the RXQ and free buffers */ 974 static void mvneta_rxq_drop_pkts(struct mvneta_port *pp, 975 struct mvneta_rx_queue *rxq) 976 { 977 int rx_done; 978 979 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); 980 if (rx_done) 981 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); 982 } 983 984 /* Handle rxq fill: allocates rxq skbs; called when initializing a port */ 985 static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, 986 int num) 987 { 988 int i; 989 990 for (i = 0; i < num; i++) { 991 u32 addr; 992 993 /* U-Boot special: Fill in the rx buffer addresses */ 994 addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE); 995 mvneta_rx_desc_fill(rxq->descs + i, addr, addr); 996 } 997 998 /* Add this number of RX descriptors as non occupied (ready to 999 * get packets) 1000 */ 1001 mvneta_rxq_non_occup_desc_add(pp, rxq, i); 1002 1003 return 0; 1004 } 1005 1006 /* Rx/Tx queue initialization/cleanup methods */ 1007 1008 /* Create a specified RX queue */ 1009 static int mvneta_rxq_init(struct mvneta_port *pp, 1010 struct mvneta_rx_queue *rxq) 1011 1012 { 1013 rxq->size = pp->rx_ring_size; 1014 1015 /* Allocate memory for RX descriptors */ 1016 rxq->descs_phys = (dma_addr_t)rxq->descs; 1017 if (rxq->descs == NULL) 1018 return -ENOMEM; 1019 1020 rxq->last_desc = rxq->size - 1; 1021 1022 /* Set Rx descriptors queue starting address */ 1023 mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys); 1024 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size); 1025 1026 /* Fill RXQ with buffers from RX pool */ 1027 mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE); 1028 mvneta_rxq_fill(pp, rxq, rxq->size); 1029 1030 return 0; 1031 } 1032 1033 /* Cleanup Rx queue */ 1034 static void mvneta_rxq_deinit(struct mvneta_port *pp, 1035 struct mvneta_rx_queue *rxq) 1036 { 1037 mvneta_rxq_drop_pkts(pp, rxq); 1038 1039 rxq->descs = NULL; 1040 rxq->last_desc = 0; 1041 rxq->next_desc_to_proc = 0; 1042 rxq->descs_phys = 0; 1043 } 1044 1045 /* Create and initialize a tx queue */ 1046 static int mvneta_txq_init(struct mvneta_port *pp, 1047 struct mvneta_tx_queue *txq) 1048 { 1049 txq->size = pp->tx_ring_size; 1050 1051 /* Allocate memory for TX descriptors */ 1052 txq->descs_phys = (dma_addr_t)txq->descs; 1053 if (txq->descs == NULL) 1054 return -ENOMEM; 1055 1056 txq->last_desc = txq->size - 1; 1057 1058 /* Set maximum bandwidth for enabled TXQs */ 1059 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff); 1060 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff); 1061 1062 /* Set Tx descriptors queue starting address */ 1063 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys); 1064 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size); 1065 1066 return 0; 1067 } 1068 1069 /* Free allocated resources when mvneta_txq_init() fails to allocate memory*/ 1070 static void mvneta_txq_deinit(struct mvneta_port *pp, 1071 struct mvneta_tx_queue *txq) 1072 { 1073 txq->descs = NULL; 1074 txq->last_desc = 0; 1075 txq->next_desc_to_proc = 0; 1076 txq->descs_phys = 0; 1077 1078 /* Set minimum bandwidth for disabled TXQs */ 1079 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0); 1080 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0); 1081 1082 /* Set Tx descriptors queue starting address and size */ 1083 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0); 1084 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0); 1085 } 1086 1087 /* Cleanup all Tx queues */ 1088 static void mvneta_cleanup_txqs(struct mvneta_port *pp) 1089 { 1090 int queue; 1091 1092 for (queue = 0; queue < txq_number; queue++) 1093 mvneta_txq_deinit(pp, &pp->txqs[queue]); 1094 } 1095 1096 /* Cleanup all Rx queues */ 1097 static void mvneta_cleanup_rxqs(struct mvneta_port *pp) 1098 { 1099 int queue; 1100 1101 for (queue = 0; queue < rxq_number; queue++) 1102 mvneta_rxq_deinit(pp, &pp->rxqs[queue]); 1103 } 1104 1105 1106 /* Init all Rx queues */ 1107 static int mvneta_setup_rxqs(struct mvneta_port *pp) 1108 { 1109 int queue; 1110 1111 for (queue = 0; queue < rxq_number; queue++) { 1112 int err = mvneta_rxq_init(pp, &pp->rxqs[queue]); 1113 if (err) { 1114 netdev_err(pp->dev, "%s: can't create rxq=%d\n", 1115 __func__, queue); 1116 mvneta_cleanup_rxqs(pp); 1117 return err; 1118 } 1119 } 1120 1121 return 0; 1122 } 1123 1124 /* Init all tx queues */ 1125 static int mvneta_setup_txqs(struct mvneta_port *pp) 1126 { 1127 int queue; 1128 1129 for (queue = 0; queue < txq_number; queue++) { 1130 int err = mvneta_txq_init(pp, &pp->txqs[queue]); 1131 if (err) { 1132 netdev_err(pp->dev, "%s: can't create txq=%d\n", 1133 __func__, queue); 1134 mvneta_cleanup_txqs(pp); 1135 return err; 1136 } 1137 } 1138 1139 return 0; 1140 } 1141 1142 static void mvneta_start_dev(struct mvneta_port *pp) 1143 { 1144 /* start the Rx/Tx activity */ 1145 mvneta_port_enable(pp); 1146 } 1147 1148 static void mvneta_adjust_link(struct udevice *dev) 1149 { 1150 struct mvneta_port *pp = dev_get_priv(dev); 1151 struct phy_device *phydev = pp->phydev; 1152 int status_change = 0; 1153 1154 if (mvneta_port_is_fixed_link(pp)) { 1155 debug("Using fixed link, skip link adjust\n"); 1156 return; 1157 } 1158 1159 if (phydev->link) { 1160 if ((pp->speed != phydev->speed) || 1161 (pp->duplex != phydev->duplex)) { 1162 u32 val; 1163 1164 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); 1165 val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | 1166 MVNETA_GMAC_CONFIG_GMII_SPEED | 1167 MVNETA_GMAC_CONFIG_FULL_DUPLEX | 1168 MVNETA_GMAC_AN_SPEED_EN | 1169 MVNETA_GMAC_AN_DUPLEX_EN); 1170 1171 if (phydev->duplex) 1172 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; 1173 1174 if (phydev->speed == SPEED_1000) 1175 val |= MVNETA_GMAC_CONFIG_GMII_SPEED; 1176 else 1177 val |= MVNETA_GMAC_CONFIG_MII_SPEED; 1178 1179 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1180 1181 pp->duplex = phydev->duplex; 1182 pp->speed = phydev->speed; 1183 } 1184 } 1185 1186 if (phydev->link != pp->link) { 1187 if (!phydev->link) { 1188 pp->duplex = -1; 1189 pp->speed = 0; 1190 } 1191 1192 pp->link = phydev->link; 1193 status_change = 1; 1194 } 1195 1196 if (status_change) { 1197 if (phydev->link) { 1198 u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); 1199 val |= (MVNETA_GMAC_FORCE_LINK_PASS | 1200 MVNETA_GMAC_FORCE_LINK_DOWN); 1201 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1202 mvneta_port_up(pp); 1203 } else { 1204 mvneta_port_down(pp); 1205 } 1206 } 1207 } 1208 1209 static int mvneta_open(struct udevice *dev) 1210 { 1211 struct mvneta_port *pp = dev_get_priv(dev); 1212 int ret; 1213 1214 ret = mvneta_setup_rxqs(pp); 1215 if (ret) 1216 return ret; 1217 1218 ret = mvneta_setup_txqs(pp); 1219 if (ret) 1220 return ret; 1221 1222 mvneta_adjust_link(dev); 1223 1224 mvneta_start_dev(pp); 1225 1226 return 0; 1227 } 1228 1229 /* Initialize hw */ 1230 static int mvneta_init2(struct mvneta_port *pp) 1231 { 1232 int queue; 1233 1234 /* Disable port */ 1235 mvneta_port_disable(pp); 1236 1237 /* Set port default values */ 1238 mvneta_defaults_set(pp); 1239 1240 pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue), 1241 GFP_KERNEL); 1242 if (!pp->txqs) 1243 return -ENOMEM; 1244 1245 /* U-Boot special: use preallocated area */ 1246 pp->txqs[0].descs = buffer_loc.tx_descs; 1247 1248 /* Initialize TX descriptor rings */ 1249 for (queue = 0; queue < txq_number; queue++) { 1250 struct mvneta_tx_queue *txq = &pp->txqs[queue]; 1251 txq->id = queue; 1252 txq->size = pp->tx_ring_size; 1253 } 1254 1255 pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue), 1256 GFP_KERNEL); 1257 if (!pp->rxqs) { 1258 kfree(pp->txqs); 1259 return -ENOMEM; 1260 } 1261 1262 /* U-Boot special: use preallocated area */ 1263 pp->rxqs[0].descs = buffer_loc.rx_descs; 1264 1265 /* Create Rx descriptor rings */ 1266 for (queue = 0; queue < rxq_number; queue++) { 1267 struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; 1268 rxq->id = queue; 1269 rxq->size = pp->rx_ring_size; 1270 } 1271 1272 return 0; 1273 } 1274 1275 /* platform glue : initialize decoding windows */ 1276 1277 /* 1278 * Not like A380, in Armada3700, there are two layers of decode windows for GBE: 1279 * First layer is: GbE Address window that resides inside the GBE unit, 1280 * Second layer is: Fabric address window which is located in the NIC400 1281 * (South Fabric). 1282 * To simplify the address decode configuration for Armada3700, we bypass the 1283 * first layer of GBE decode window by setting the first window to 4GB. 1284 */ 1285 static void mvneta_bypass_mbus_windows(struct mvneta_port *pp) 1286 { 1287 /* 1288 * Set window size to 4GB, to bypass GBE address decode, leave the 1289 * work to MBUS decode window 1290 */ 1291 mvreg_write(pp, MVNETA_WIN_SIZE(0), MVNETA_WIN_SIZE_MASK); 1292 1293 /* Enable GBE address decode window 0 by set bit 0 to 0 */ 1294 clrbits_le32(pp->base + MVNETA_BASE_ADDR_ENABLE, 1295 MVNETA_BASE_ADDR_ENABLE_BIT); 1296 1297 /* Set GBE address decode window 0 to full Access (read or write) */ 1298 setbits_le32(pp->base + MVNETA_PORT_ACCESS_PROTECT, 1299 MVNETA_PORT_ACCESS_PROTECT_WIN0_RW); 1300 } 1301 1302 static void mvneta_conf_mbus_windows(struct mvneta_port *pp) 1303 { 1304 const struct mbus_dram_target_info *dram; 1305 u32 win_enable; 1306 u32 win_protect; 1307 int i; 1308 1309 dram = mvebu_mbus_dram_info(); 1310 for (i = 0; i < 6; i++) { 1311 mvreg_write(pp, MVNETA_WIN_BASE(i), 0); 1312 mvreg_write(pp, MVNETA_WIN_SIZE(i), 0); 1313 1314 if (i < 4) 1315 mvreg_write(pp, MVNETA_WIN_REMAP(i), 0); 1316 } 1317 1318 win_enable = 0x3f; 1319 win_protect = 0; 1320 1321 for (i = 0; i < dram->num_cs; i++) { 1322 const struct mbus_dram_window *cs = dram->cs + i; 1323 mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) | 1324 (cs->mbus_attr << 8) | dram->mbus_dram_target_id); 1325 1326 mvreg_write(pp, MVNETA_WIN_SIZE(i), 1327 (cs->size - 1) & 0xffff0000); 1328 1329 win_enable &= ~(1 << i); 1330 win_protect |= 3 << (2 * i); 1331 } 1332 1333 mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable); 1334 } 1335 1336 /* Power up the port */ 1337 static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) 1338 { 1339 u32 ctrl; 1340 1341 /* MAC Cause register should be cleared */ 1342 mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); 1343 1344 ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2); 1345 1346 /* Even though it might look weird, when we're configured in 1347 * SGMII or QSGMII mode, the RGMII bit needs to be set. 1348 */ 1349 switch (phy_mode) { 1350 case PHY_INTERFACE_MODE_QSGMII: 1351 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); 1352 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; 1353 break; 1354 case PHY_INTERFACE_MODE_SGMII: 1355 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); 1356 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; 1357 break; 1358 case PHY_INTERFACE_MODE_RGMII: 1359 case PHY_INTERFACE_MODE_RGMII_ID: 1360 ctrl |= MVNETA_GMAC2_PORT_RGMII; 1361 break; 1362 default: 1363 return -EINVAL; 1364 } 1365 1366 /* Cancel Port Reset */ 1367 ctrl &= ~MVNETA_GMAC2_PORT_RESET; 1368 mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl); 1369 1370 while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) & 1371 MVNETA_GMAC2_PORT_RESET) != 0) 1372 continue; 1373 1374 return 0; 1375 } 1376 1377 /* Device initialization routine */ 1378 static int mvneta_init(struct udevice *dev) 1379 { 1380 struct eth_pdata *pdata = dev_get_platdata(dev); 1381 struct mvneta_port *pp = dev_get_priv(dev); 1382 int err; 1383 1384 pp->tx_ring_size = MVNETA_MAX_TXD; 1385 pp->rx_ring_size = MVNETA_MAX_RXD; 1386 1387 err = mvneta_init2(pp); 1388 if (err < 0) { 1389 dev_err(&pdev->dev, "can't init eth hal\n"); 1390 return err; 1391 } 1392 1393 mvneta_mac_addr_set(pp, pdata->enetaddr, rxq_def); 1394 1395 err = mvneta_port_power_up(pp, pp->phy_interface); 1396 if (err < 0) { 1397 dev_err(&pdev->dev, "can't power up port\n"); 1398 return err; 1399 } 1400 1401 /* Call open() now as it needs to be done before runing send() */ 1402 mvneta_open(dev); 1403 1404 return 0; 1405 } 1406 1407 /* U-Boot only functions follow here */ 1408 1409 /* SMI / MDIO functions */ 1410 1411 static int smi_wait_ready(struct mvneta_port *pp) 1412 { 1413 u32 timeout = MVNETA_SMI_TIMEOUT; 1414 u32 smi_reg; 1415 1416 /* wait till the SMI is not busy */ 1417 do { 1418 /* read smi register */ 1419 smi_reg = mvreg_read(pp, MVNETA_SMI); 1420 if (timeout-- == 0) { 1421 printf("Error: SMI busy timeout\n"); 1422 return -EFAULT; 1423 } 1424 } while (smi_reg & MVNETA_SMI_BUSY); 1425 1426 return 0; 1427 } 1428 1429 /* 1430 * mvneta_mdio_read - miiphy_read callback function. 1431 * 1432 * Returns 16bit phy register value, or 0xffff on error 1433 */ 1434 static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) 1435 { 1436 struct mvneta_port *pp = bus->priv; 1437 u32 smi_reg; 1438 u32 timeout; 1439 1440 /* check parameters */ 1441 if (addr > MVNETA_PHY_ADDR_MASK) { 1442 printf("Error: Invalid PHY address %d\n", addr); 1443 return -EFAULT; 1444 } 1445 1446 if (reg > MVNETA_PHY_REG_MASK) { 1447 printf("Err: Invalid register offset %d\n", reg); 1448 return -EFAULT; 1449 } 1450 1451 /* wait till the SMI is not busy */ 1452 if (smi_wait_ready(pp) < 0) 1453 return -EFAULT; 1454 1455 /* fill the phy address and regiser offset and read opcode */ 1456 smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS) 1457 | (reg << MVNETA_SMI_REG_ADDR_OFFS) 1458 | MVNETA_SMI_OPCODE_READ; 1459 1460 /* write the smi register */ 1461 mvreg_write(pp, MVNETA_SMI, smi_reg); 1462 1463 /* wait till read value is ready */ 1464 timeout = MVNETA_SMI_TIMEOUT; 1465 1466 do { 1467 /* read smi register */ 1468 smi_reg = mvreg_read(pp, MVNETA_SMI); 1469 if (timeout-- == 0) { 1470 printf("Err: SMI read ready timeout\n"); 1471 return -EFAULT; 1472 } 1473 } while (!(smi_reg & MVNETA_SMI_READ_VALID)); 1474 1475 /* Wait for the data to update in the SMI register */ 1476 for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++) 1477 ; 1478 1479 return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK; 1480 } 1481 1482 /* 1483 * mvneta_mdio_write - miiphy_write callback function. 1484 * 1485 * Returns 0 if write succeed, -EINVAL on bad parameters 1486 * -ETIME on timeout 1487 */ 1488 static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, 1489 u16 value) 1490 { 1491 struct mvneta_port *pp = bus->priv; 1492 u32 smi_reg; 1493 1494 /* check parameters */ 1495 if (addr > MVNETA_PHY_ADDR_MASK) { 1496 printf("Error: Invalid PHY address %d\n", addr); 1497 return -EFAULT; 1498 } 1499 1500 if (reg > MVNETA_PHY_REG_MASK) { 1501 printf("Err: Invalid register offset %d\n", reg); 1502 return -EFAULT; 1503 } 1504 1505 /* wait till the SMI is not busy */ 1506 if (smi_wait_ready(pp) < 0) 1507 return -EFAULT; 1508 1509 /* fill the phy addr and reg offset and write opcode and data */ 1510 smi_reg = value << MVNETA_SMI_DATA_OFFS; 1511 smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS) 1512 | (reg << MVNETA_SMI_REG_ADDR_OFFS); 1513 smi_reg &= ~MVNETA_SMI_OPCODE_READ; 1514 1515 /* write the smi register */ 1516 mvreg_write(pp, MVNETA_SMI, smi_reg); 1517 1518 return 0; 1519 } 1520 1521 static int mvneta_start(struct udevice *dev) 1522 { 1523 struct mvneta_port *pp = dev_get_priv(dev); 1524 struct phy_device *phydev; 1525 1526 mvneta_port_power_up(pp, pp->phy_interface); 1527 1528 if (!pp->init || pp->link == 0) { 1529 if (mvneta_port_is_fixed_link(pp)) { 1530 u32 val; 1531 1532 pp->init = 1; 1533 pp->link = 1; 1534 mvneta_init(dev); 1535 1536 val = MVNETA_GMAC_FORCE_LINK_UP | 1537 MVNETA_GMAC_IB_BYPASS_AN_EN | 1538 MVNETA_GMAC_SET_FC_EN | 1539 MVNETA_GMAC_ADVERT_FC_EN | 1540 MVNETA_GMAC_SAMPLE_TX_CFG_EN; 1541 1542 if (pp->duplex) 1543 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; 1544 1545 if (pp->speed == SPEED_1000) 1546 val |= MVNETA_GMAC_CONFIG_GMII_SPEED; 1547 else if (pp->speed == SPEED_100) 1548 val |= MVNETA_GMAC_CONFIG_MII_SPEED; 1549 1550 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1551 } else { 1552 /* Set phy address of the port */ 1553 mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr); 1554 1555 phydev = phy_connect(pp->bus, pp->phyaddr, dev, 1556 pp->phy_interface); 1557 1558 pp->phydev = phydev; 1559 phy_config(phydev); 1560 phy_startup(phydev); 1561 if (!phydev->link) { 1562 printf("%s: No link.\n", phydev->dev->name); 1563 return -1; 1564 } 1565 1566 /* Full init on first call */ 1567 mvneta_init(dev); 1568 pp->init = 1; 1569 return 0; 1570 } 1571 } 1572 1573 /* Upon all following calls, this is enough */ 1574 mvneta_port_up(pp); 1575 mvneta_port_enable(pp); 1576 1577 return 0; 1578 } 1579 1580 static int mvneta_send(struct udevice *dev, void *packet, int length) 1581 { 1582 struct mvneta_port *pp = dev_get_priv(dev); 1583 struct mvneta_tx_queue *txq = &pp->txqs[0]; 1584 struct mvneta_tx_desc *tx_desc; 1585 int sent_desc; 1586 u32 timeout = 0; 1587 1588 /* Get a descriptor for the first part of the packet */ 1589 tx_desc = mvneta_txq_next_desc_get(txq); 1590 1591 tx_desc->buf_phys_addr = (u32)(uintptr_t)packet; 1592 tx_desc->data_size = length; 1593 flush_dcache_range((ulong)packet, 1594 (ulong)packet + ALIGN(length, PKTALIGN)); 1595 1596 /* First and Last descriptor */ 1597 tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC; 1598 mvneta_txq_pend_desc_add(pp, txq, 1); 1599 1600 /* Wait for packet to be sent (queue might help with speed here) */ 1601 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); 1602 while (!sent_desc) { 1603 if (timeout++ > 10000) { 1604 printf("timeout: packet not sent\n"); 1605 return -1; 1606 } 1607 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); 1608 } 1609 1610 /* txDone has increased - hw sent packet */ 1611 mvneta_txq_sent_desc_dec(pp, txq, sent_desc); 1612 1613 return 0; 1614 } 1615 1616 static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp) 1617 { 1618 struct mvneta_port *pp = dev_get_priv(dev); 1619 int rx_done; 1620 struct mvneta_rx_queue *rxq; 1621 int rx_bytes = 0; 1622 1623 /* get rx queue */ 1624 rxq = mvneta_rxq_handle_get(pp, rxq_def); 1625 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); 1626 1627 if (rx_done) { 1628 struct mvneta_rx_desc *rx_desc; 1629 unsigned char *data; 1630 u32 rx_status; 1631 1632 /* 1633 * No cache invalidation needed here, since the desc's are 1634 * located in a uncached memory region 1635 */ 1636 rx_desc = mvneta_rxq_next_desc_get(rxq); 1637 1638 rx_status = rx_desc->status; 1639 if (!mvneta_rxq_desc_is_first_last(rx_status) || 1640 (rx_status & MVNETA_RXD_ERR_SUMMARY)) { 1641 mvneta_rx_error(pp, rx_desc); 1642 /* leave the descriptor untouched */ 1643 return -EIO; 1644 } 1645 1646 /* 2 bytes for marvell header. 4 bytes for crc */ 1647 rx_bytes = rx_desc->data_size - 6; 1648 1649 /* give packet to stack - skip on first 2 bytes */ 1650 data = (u8 *)(uintptr_t)rx_desc->buf_cookie + 2; 1651 /* 1652 * No cache invalidation needed here, since the rx_buffer's are 1653 * located in a uncached memory region 1654 */ 1655 *packetp = data; 1656 1657 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); 1658 } 1659 1660 return rx_bytes; 1661 } 1662 1663 static int mvneta_probe(struct udevice *dev) 1664 { 1665 struct eth_pdata *pdata = dev_get_platdata(dev); 1666 struct mvneta_port *pp = dev_get_priv(dev); 1667 void *blob = (void *)gd->fdt_blob; 1668 int node = dev_of_offset(dev); 1669 struct mii_dev *bus; 1670 unsigned long addr; 1671 void *bd_space; 1672 int ret; 1673 int fl_node; 1674 1675 /* 1676 * Allocate buffer area for descs and rx_buffers. This is only 1677 * done once for all interfaces. As only one interface can 1678 * be active. Make this area DMA safe by disabling the D-cache 1679 */ 1680 if (!buffer_loc.tx_descs) { 1681 /* Align buffer area for descs and rx_buffers to 1MiB */ 1682 bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); 1683 mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE, 1684 DCACHE_OFF); 1685 buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space; 1686 buffer_loc.rx_descs = (struct mvneta_rx_desc *) 1687 ((phys_addr_t)bd_space + 1688 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc)); 1689 buffer_loc.rx_buffers = (phys_addr_t) 1690 (bd_space + 1691 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) + 1692 MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc)); 1693 } 1694 1695 pp->base = (void __iomem *)pdata->iobase; 1696 1697 /* Configure MBUS address windows */ 1698 if (of_device_is_compatible(dev, "marvell,armada-3700-neta")) 1699 mvneta_bypass_mbus_windows(pp); 1700 else 1701 mvneta_conf_mbus_windows(pp); 1702 1703 /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */ 1704 pp->phy_interface = pdata->phy_interface; 1705 1706 /* fetch 'fixed-link' property from 'neta' node */ 1707 fl_node = fdt_subnode_offset(blob, node, "fixed-link"); 1708 if (fl_node != -FDT_ERR_NOTFOUND) { 1709 /* set phy_addr to invalid value for fixed link */ 1710 pp->phyaddr = PHY_MAX_ADDR + 1; 1711 pp->duplex = fdtdec_get_bool(blob, fl_node, "full-duplex"); 1712 pp->speed = fdtdec_get_int(blob, fl_node, "speed", 0); 1713 } else { 1714 /* Now read phyaddr from DT */ 1715 addr = fdtdec_get_int(blob, node, "phy", 0); 1716 addr = fdt_node_offset_by_phandle(blob, addr); 1717 pp->phyaddr = fdtdec_get_int(blob, addr, "reg", 0); 1718 } 1719 1720 bus = mdio_alloc(); 1721 if (!bus) { 1722 printf("Failed to allocate MDIO bus\n"); 1723 return -ENOMEM; 1724 } 1725 1726 bus->read = mvneta_mdio_read; 1727 bus->write = mvneta_mdio_write; 1728 snprintf(bus->name, sizeof(bus->name), dev->name); 1729 bus->priv = (void *)pp; 1730 pp->bus = bus; 1731 1732 ret = mdio_register(bus); 1733 if (ret) 1734 return ret; 1735 1736 return board_network_enable(bus); 1737 } 1738 1739 static void mvneta_stop(struct udevice *dev) 1740 { 1741 struct mvneta_port *pp = dev_get_priv(dev); 1742 1743 mvneta_port_down(pp); 1744 mvneta_port_disable(pp); 1745 } 1746 1747 static const struct eth_ops mvneta_ops = { 1748 .start = mvneta_start, 1749 .send = mvneta_send, 1750 .recv = mvneta_recv, 1751 .stop = mvneta_stop, 1752 }; 1753 1754 static int mvneta_ofdata_to_platdata(struct udevice *dev) 1755 { 1756 struct eth_pdata *pdata = dev_get_platdata(dev); 1757 const char *phy_mode; 1758 1759 pdata->iobase = dev_get_addr(dev); 1760 1761 /* Get phy-mode / phy_interface from DT */ 1762 pdata->phy_interface = -1; 1763 phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode", 1764 NULL); 1765 if (phy_mode) 1766 pdata->phy_interface = phy_get_interface_by_name(phy_mode); 1767 if (pdata->phy_interface == -1) { 1768 debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); 1769 return -EINVAL; 1770 } 1771 1772 return 0; 1773 } 1774 1775 static const struct udevice_id mvneta_ids[] = { 1776 { .compatible = "marvell,armada-370-neta" }, 1777 { .compatible = "marvell,armada-xp-neta" }, 1778 { .compatible = "marvell,armada-3700-neta" }, 1779 { } 1780 }; 1781 1782 U_BOOT_DRIVER(mvneta) = { 1783 .name = "mvneta", 1784 .id = UCLASS_ETH, 1785 .of_match = mvneta_ids, 1786 .ofdata_to_platdata = mvneta_ofdata_to_platdata, 1787 .probe = mvneta_probe, 1788 .ops = &mvneta_ops, 1789 .priv_auto_alloc_size = sizeof(struct mvneta_port), 1790 .platdata_auto_alloc_size = sizeof(struct eth_pdata), 1791 }; 1792