1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs. 4 * 5 * U-Boot version: 6 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de> 7 * 8 * Based on the Linux version which is: 9 * Copyright (C) 2012 Marvell 10 * 11 * Rami Rosen <rosenr@marvell.com> 12 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 13 */ 14 15 #include <common.h> 16 #include <dm.h> 17 #include <net.h> 18 #include <netdev.h> 19 #include <config.h> 20 #include <malloc.h> 21 #include <asm/io.h> 22 #include <linux/errno.h> 23 #include <phy.h> 24 #include <miiphy.h> 25 #include <watchdog.h> 26 #include <asm/arch/cpu.h> 27 #include <asm/arch/soc.h> 28 #include <linux/compat.h> 29 #include <linux/mbus.h> 30 31 DECLARE_GLOBAL_DATA_PTR; 32 33 #if !defined(CONFIG_PHYLIB) 34 # error Marvell mvneta requires PHYLIB 35 #endif 36 37 /* Some linux -> U-Boot compatibility stuff */ 38 #define netdev_err(dev, fmt, args...) \ 39 printf(fmt, ##args) 40 #define netdev_warn(dev, fmt, args...) \ 41 printf(fmt, ##args) 42 #define netdev_info(dev, fmt, args...) \ 43 printf(fmt, ##args) 44 45 #define CONFIG_NR_CPUS 1 46 #define ETH_HLEN 14 /* Total octets in header */ 47 48 /* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */ 49 #define WRAP (2 + ETH_HLEN + 4 + 32) 50 #define MTU 1500 51 #define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN)) 52 53 #define MVNETA_SMI_TIMEOUT 10000 54 55 /* Registers */ 56 #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) 57 #define MVNETA_RXQ_HW_BUF_ALLOC BIT(1) 58 #define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8) 59 #define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8) 60 #define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2)) 61 #define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16) 62 #define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2)) 63 #define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2)) 64 #define MVNETA_RXQ_BUF_SIZE_SHIFT 19 65 #define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19) 66 #define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2)) 67 #define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff 68 #define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2)) 69 #define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16 70 #define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255 71 #define MVNETA_PORT_RX_RESET 0x1cc0 72 #define MVNETA_PORT_RX_DMA_RESET BIT(0) 73 #define MVNETA_PHY_ADDR 0x2000 74 #define MVNETA_PHY_ADDR_MASK 0x1f 75 #define MVNETA_SMI 0x2004 76 #define MVNETA_PHY_REG_MASK 0x1f 77 /* SMI register fields */ 78 #define MVNETA_SMI_DATA_OFFS 0 /* Data */ 79 #define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS) 80 #define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ 81 #define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/ 82 #define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ 83 #define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS) 84 #define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */ 85 #define MVNETA_SMI_BUSY (1 << 28) /* Busy */ 86 #define MVNETA_MBUS_RETRY 0x2010 87 #define MVNETA_UNIT_INTR_CAUSE 0x2080 88 #define MVNETA_UNIT_CONTROL 0x20B0 89 #define MVNETA_PHY_POLLING_ENABLE BIT(1) 90 #define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3)) 91 #define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3)) 92 #define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2)) 93 #define MVNETA_WIN_SIZE_MASK (0xffff0000) 94 #define MVNETA_BASE_ADDR_ENABLE 0x2290 95 #define MVNETA_BASE_ADDR_ENABLE_BIT 0x1 96 #define MVNETA_PORT_ACCESS_PROTECT 0x2294 97 #define MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3 98 #define MVNETA_PORT_CONFIG 0x2400 99 #define MVNETA_UNI_PROMISC_MODE BIT(0) 100 #define MVNETA_DEF_RXQ(q) ((q) << 1) 101 #define MVNETA_DEF_RXQ_ARP(q) ((q) << 4) 102 #define MVNETA_TX_UNSET_ERR_SUM BIT(12) 103 #define MVNETA_DEF_RXQ_TCP(q) ((q) << 16) 104 #define MVNETA_DEF_RXQ_UDP(q) ((q) << 19) 105 #define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22) 106 #define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25) 107 #define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \ 108 MVNETA_DEF_RXQ_ARP(q) | \ 109 MVNETA_DEF_RXQ_TCP(q) | \ 110 MVNETA_DEF_RXQ_UDP(q) | \ 111 MVNETA_DEF_RXQ_BPDU(q) | \ 112 MVNETA_TX_UNSET_ERR_SUM | \ 113 MVNETA_RX_CSUM_WITH_PSEUDO_HDR) 114 #define MVNETA_PORT_CONFIG_EXTEND 0x2404 115 #define MVNETA_MAC_ADDR_LOW 0x2414 116 #define MVNETA_MAC_ADDR_HIGH 0x2418 117 #define MVNETA_SDMA_CONFIG 0x241c 118 #define MVNETA_SDMA_BRST_SIZE_16 4 119 #define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1) 120 #define MVNETA_RX_NO_DATA_SWAP BIT(4) 121 #define MVNETA_TX_NO_DATA_SWAP BIT(5) 122 #define MVNETA_DESC_SWAP BIT(6) 123 #define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22) 124 #define MVNETA_PORT_STATUS 0x2444 125 #define MVNETA_TX_IN_PRGRS BIT(1) 126 #define MVNETA_TX_FIFO_EMPTY BIT(8) 127 #define MVNETA_RX_MIN_FRAME_SIZE 0x247c 128 #define MVNETA_SERDES_CFG 0x24A0 129 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 130 #define MVNETA_QSGMII_SERDES_PROTO 0x0667 131 #define MVNETA_TYPE_PRIO 0x24bc 132 #define MVNETA_FORCE_UNI BIT(21) 133 #define MVNETA_TXQ_CMD_1 0x24e4 134 #define MVNETA_TXQ_CMD 0x2448 135 #define MVNETA_TXQ_DISABLE_SHIFT 8 136 #define MVNETA_TXQ_ENABLE_MASK 0x000000ff 137 #define MVNETA_ACC_MODE 0x2500 138 #define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2)) 139 #define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff 140 #define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00 141 #define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2)) 142 143 /* Exception Interrupt Port/Queue Cause register */ 144 145 #define MVNETA_INTR_NEW_CAUSE 0x25a0 146 #define MVNETA_INTR_NEW_MASK 0x25a4 147 148 /* bits 0..7 = TXQ SENT, one bit per queue. 149 * bits 8..15 = RXQ OCCUP, one bit per queue. 150 * bits 16..23 = RXQ FREE, one bit per queue. 151 * bit 29 = OLD_REG_SUM, see old reg ? 152 * bit 30 = TX_ERR_SUM, one bit for 4 ports 153 * bit 31 = MISC_SUM, one bit for 4 ports 154 */ 155 #define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0) 156 #define MVNETA_TX_INTR_MASK_ALL (0xff << 0) 157 #define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8) 158 #define MVNETA_RX_INTR_MASK_ALL (0xff << 8) 159 160 #define MVNETA_INTR_OLD_CAUSE 0x25a8 161 #define MVNETA_INTR_OLD_MASK 0x25ac 162 163 /* Data Path Port/Queue Cause Register */ 164 #define MVNETA_INTR_MISC_CAUSE 0x25b0 165 #define MVNETA_INTR_MISC_MASK 0x25b4 166 #define MVNETA_INTR_ENABLE 0x25b8 167 168 #define MVNETA_RXQ_CMD 0x2680 169 #define MVNETA_RXQ_DISABLE_SHIFT 8 170 #define MVNETA_RXQ_ENABLE_MASK 0x000000ff 171 #define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4)) 172 #define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4)) 173 #define MVNETA_GMAC_CTRL_0 0x2c00 174 #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2 175 #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc 176 #define MVNETA_GMAC0_PORT_ENABLE BIT(0) 177 #define MVNETA_GMAC_CTRL_2 0x2c08 178 #define MVNETA_GMAC2_PCS_ENABLE BIT(3) 179 #define MVNETA_GMAC2_PORT_RGMII BIT(4) 180 #define MVNETA_GMAC2_PORT_RESET BIT(6) 181 #define MVNETA_GMAC_STATUS 0x2c10 182 #define MVNETA_GMAC_LINK_UP BIT(0) 183 #define MVNETA_GMAC_SPEED_1000 BIT(1) 184 #define MVNETA_GMAC_SPEED_100 BIT(2) 185 #define MVNETA_GMAC_FULL_DUPLEX BIT(3) 186 #define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4) 187 #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5) 188 #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6) 189 #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7) 190 #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c 191 #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0) 192 #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1) 193 #define MVNETA_GMAC_FORCE_LINK_UP (BIT(0) | BIT(1)) 194 #define MVNETA_GMAC_IB_BYPASS_AN_EN BIT(3) 195 #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5) 196 #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6) 197 #define MVNETA_GMAC_AN_SPEED_EN BIT(7) 198 #define MVNETA_GMAC_SET_FC_EN BIT(8) 199 #define MVNETA_GMAC_ADVERT_FC_EN BIT(9) 200 #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) 201 #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) 202 #define MVNETA_GMAC_SAMPLE_TX_CFG_EN BIT(15) 203 #define MVNETA_MIB_COUNTERS_BASE 0x3080 204 #define MVNETA_MIB_LATE_COLLISION 0x7c 205 #define MVNETA_DA_FILT_SPEC_MCAST 0x3400 206 #define MVNETA_DA_FILT_OTH_MCAST 0x3500 207 #define MVNETA_DA_FILT_UCAST_BASE 0x3600 208 #define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2)) 209 #define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2)) 210 #define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000 211 #define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16) 212 #define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2)) 213 #define MVNETA_TXQ_DEC_SENT_SHIFT 16 214 #define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2)) 215 #define MVNETA_TXQ_SENT_DESC_SHIFT 16 216 #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000 217 #define MVNETA_PORT_TX_RESET 0x3cf0 218 #define MVNETA_PORT_TX_DMA_RESET BIT(0) 219 #define MVNETA_TX_MTU 0x3e0c 220 #define MVNETA_TX_TOKEN_SIZE 0x3e14 221 #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff 222 #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) 223 #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff 224 225 /* Descriptor ring Macros */ 226 #define MVNETA_QUEUE_NEXT_DESC(q, index) \ 227 (((index) < (q)->last_desc) ? ((index) + 1) : 0) 228 229 /* Various constants */ 230 231 /* Coalescing */ 232 #define MVNETA_TXDONE_COAL_PKTS 16 233 #define MVNETA_RX_COAL_PKTS 32 234 #define MVNETA_RX_COAL_USEC 100 235 236 /* The two bytes Marvell header. Either contains a special value used 237 * by Marvell switches when a specific hardware mode is enabled (not 238 * supported by this driver) or is filled automatically by zeroes on 239 * the RX side. Those two bytes being at the front of the Ethernet 240 * header, they allow to have the IP header aligned on a 4 bytes 241 * boundary automatically: the hardware skips those two bytes on its 242 * own. 243 */ 244 #define MVNETA_MH_SIZE 2 245 246 #define MVNETA_VLAN_TAG_LEN 4 247 248 #define MVNETA_CPU_D_CACHE_LINE_SIZE 32 249 #define MVNETA_TX_CSUM_MAX_SIZE 9800 250 #define MVNETA_ACC_MODE_EXT 1 251 252 /* Timeout constants */ 253 #define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000 254 #define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000 255 #define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000 256 257 #define MVNETA_TX_MTU_MAX 0x3ffff 258 259 /* Max number of Rx descriptors */ 260 #define MVNETA_MAX_RXD 16 261 262 /* Max number of Tx descriptors */ 263 #define MVNETA_MAX_TXD 16 264 265 /* descriptor aligned size */ 266 #define MVNETA_DESC_ALIGNED_SIZE 32 267 268 struct mvneta_port { 269 void __iomem *base; 270 struct mvneta_rx_queue *rxqs; 271 struct mvneta_tx_queue *txqs; 272 273 u8 mcast_count[256]; 274 u16 tx_ring_size; 275 u16 rx_ring_size; 276 277 phy_interface_t phy_interface; 278 unsigned int link; 279 unsigned int duplex; 280 unsigned int speed; 281 282 int init; 283 int phyaddr; 284 struct phy_device *phydev; 285 struct mii_dev *bus; 286 }; 287 288 /* The mvneta_tx_desc and mvneta_rx_desc structures describe the 289 * layout of the transmit and reception DMA descriptors, and their 290 * layout is therefore defined by the hardware design 291 */ 292 293 #define MVNETA_TX_L3_OFF_SHIFT 0 294 #define MVNETA_TX_IP_HLEN_SHIFT 8 295 #define MVNETA_TX_L4_UDP BIT(16) 296 #define MVNETA_TX_L3_IP6 BIT(17) 297 #define MVNETA_TXD_IP_CSUM BIT(18) 298 #define MVNETA_TXD_Z_PAD BIT(19) 299 #define MVNETA_TXD_L_DESC BIT(20) 300 #define MVNETA_TXD_F_DESC BIT(21) 301 #define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \ 302 MVNETA_TXD_L_DESC | \ 303 MVNETA_TXD_F_DESC) 304 #define MVNETA_TX_L4_CSUM_FULL BIT(30) 305 #define MVNETA_TX_L4_CSUM_NOT BIT(31) 306 307 #define MVNETA_RXD_ERR_CRC 0x0 308 #define MVNETA_RXD_ERR_SUMMARY BIT(16) 309 #define MVNETA_RXD_ERR_OVERRUN BIT(17) 310 #define MVNETA_RXD_ERR_LEN BIT(18) 311 #define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18)) 312 #define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18)) 313 #define MVNETA_RXD_L3_IP4 BIT(25) 314 #define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27)) 315 #define MVNETA_RXD_L4_CSUM_OK BIT(30) 316 317 struct mvneta_tx_desc { 318 u32 command; /* Options used by HW for packet transmitting.*/ 319 u16 reserverd1; /* csum_l4 (for future use) */ 320 u16 data_size; /* Data size of transmitted packet in bytes */ 321 u32 buf_phys_addr; /* Physical addr of transmitted buffer */ 322 u32 reserved2; /* hw_cmd - (for future use, PMT) */ 323 u32 reserved3[4]; /* Reserved - (for future use) */ 324 }; 325 326 struct mvneta_rx_desc { 327 u32 status; /* Info about received packet */ 328 u16 reserved1; /* pnc_info - (for future use, PnC) */ 329 u16 data_size; /* Size of received packet in bytes */ 330 331 u32 buf_phys_addr; /* Physical address of the buffer */ 332 u32 reserved2; /* pnc_flow_id (for future use, PnC) */ 333 334 u32 buf_cookie; /* cookie for access to RX buffer in rx path */ 335 u16 reserved3; /* prefetch_cmd, for future use */ 336 u16 reserved4; /* csum_l4 - (for future use, PnC) */ 337 338 u32 reserved5; /* pnc_extra PnC (for future use, PnC) */ 339 u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */ 340 }; 341 342 struct mvneta_tx_queue { 343 /* Number of this TX queue, in the range 0-7 */ 344 u8 id; 345 346 /* Number of TX DMA descriptors in the descriptor ring */ 347 int size; 348 349 /* Index of last TX DMA descriptor that was inserted */ 350 int txq_put_index; 351 352 /* Index of the TX DMA descriptor to be cleaned up */ 353 int txq_get_index; 354 355 /* Virtual address of the TX DMA descriptors array */ 356 struct mvneta_tx_desc *descs; 357 358 /* DMA address of the TX DMA descriptors array */ 359 dma_addr_t descs_phys; 360 361 /* Index of the last TX DMA descriptor */ 362 int last_desc; 363 364 /* Index of the next TX DMA descriptor to process */ 365 int next_desc_to_proc; 366 }; 367 368 struct mvneta_rx_queue { 369 /* rx queue number, in the range 0-7 */ 370 u8 id; 371 372 /* num of rx descriptors in the rx descriptor ring */ 373 int size; 374 375 /* Virtual address of the RX DMA descriptors array */ 376 struct mvneta_rx_desc *descs; 377 378 /* DMA address of the RX DMA descriptors array */ 379 dma_addr_t descs_phys; 380 381 /* Index of the last RX DMA descriptor */ 382 int last_desc; 383 384 /* Index of the next RX DMA descriptor to process */ 385 int next_desc_to_proc; 386 }; 387 388 /* U-Boot doesn't use the queues, so set the number to 1 */ 389 static int rxq_number = 1; 390 static int txq_number = 1; 391 static int rxq_def; 392 393 struct buffer_location { 394 struct mvneta_tx_desc *tx_descs; 395 struct mvneta_rx_desc *rx_descs; 396 u32 rx_buffers; 397 }; 398 399 /* 400 * All 4 interfaces use the same global buffer, since only one interface 401 * can be enabled at once 402 */ 403 static struct buffer_location buffer_loc; 404 405 /* 406 * Page table entries are set to 1MB, or multiples of 1MB 407 * (not < 1MB). driver uses less bd's so use 1MB bdspace. 408 */ 409 #define BD_SPACE (1 << 20) 410 411 /* 412 * Dummy implementation that can be overwritten by a board 413 * specific function 414 */ 415 __weak int board_network_enable(struct mii_dev *bus) 416 { 417 return 0; 418 } 419 420 /* Utility/helper methods */ 421 422 /* Write helper method */ 423 static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data) 424 { 425 writel(data, pp->base + offset); 426 } 427 428 /* Read helper method */ 429 static u32 mvreg_read(struct mvneta_port *pp, u32 offset) 430 { 431 return readl(pp->base + offset); 432 } 433 434 /* Clear all MIB counters */ 435 static void mvneta_mib_counters_clear(struct mvneta_port *pp) 436 { 437 int i; 438 439 /* Perform dummy reads from MIB counters */ 440 for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4) 441 mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i)); 442 } 443 444 /* Rx descriptors helper methods */ 445 446 /* Checks whether the RX descriptor having this status is both the first 447 * and the last descriptor for the RX packet. Each RX packet is currently 448 * received through a single RX descriptor, so not having each RX 449 * descriptor with its first and last bits set is an error 450 */ 451 static int mvneta_rxq_desc_is_first_last(u32 status) 452 { 453 return (status & MVNETA_RXD_FIRST_LAST_DESC) == 454 MVNETA_RXD_FIRST_LAST_DESC; 455 } 456 457 /* Add number of descriptors ready to receive new packets */ 458 static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp, 459 struct mvneta_rx_queue *rxq, 460 int ndescs) 461 { 462 /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can 463 * be added at once 464 */ 465 while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) { 466 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), 467 (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX << 468 MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); 469 ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX; 470 } 471 472 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), 473 (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); 474 } 475 476 /* Get number of RX descriptors occupied by received packets */ 477 static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp, 478 struct mvneta_rx_queue *rxq) 479 { 480 u32 val; 481 482 val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id)); 483 return val & MVNETA_RXQ_OCCUPIED_ALL_MASK; 484 } 485 486 /* Update num of rx desc called upon return from rx path or 487 * from mvneta_rxq_drop_pkts(). 488 */ 489 static void mvneta_rxq_desc_num_update(struct mvneta_port *pp, 490 struct mvneta_rx_queue *rxq, 491 int rx_done, int rx_filled) 492 { 493 u32 val; 494 495 if ((rx_done <= 0xff) && (rx_filled <= 0xff)) { 496 val = rx_done | 497 (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT); 498 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); 499 return; 500 } 501 502 /* Only 255 descriptors can be added at once */ 503 while ((rx_done > 0) || (rx_filled > 0)) { 504 if (rx_done <= 0xff) { 505 val = rx_done; 506 rx_done = 0; 507 } else { 508 val = 0xff; 509 rx_done -= 0xff; 510 } 511 if (rx_filled <= 0xff) { 512 val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; 513 rx_filled = 0; 514 } else { 515 val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; 516 rx_filled -= 0xff; 517 } 518 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); 519 } 520 } 521 522 /* Get pointer to next RX descriptor to be processed by SW */ 523 static struct mvneta_rx_desc * 524 mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq) 525 { 526 int rx_desc = rxq->next_desc_to_proc; 527 528 rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc); 529 return rxq->descs + rx_desc; 530 } 531 532 /* Tx descriptors helper methods */ 533 534 /* Update HW with number of TX descriptors to be sent */ 535 static void mvneta_txq_pend_desc_add(struct mvneta_port *pp, 536 struct mvneta_tx_queue *txq, 537 int pend_desc) 538 { 539 u32 val; 540 541 /* Only 255 descriptors can be added at once ; Assume caller 542 * process TX descriptors in quanta less than 256 543 */ 544 val = pend_desc; 545 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 546 } 547 548 /* Get pointer to next TX descriptor to be processed (send) by HW */ 549 static struct mvneta_tx_desc * 550 mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq) 551 { 552 int tx_desc = txq->next_desc_to_proc; 553 554 txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc); 555 return txq->descs + tx_desc; 556 } 557 558 /* Set rxq buf size */ 559 static void mvneta_rxq_buf_size_set(struct mvneta_port *pp, 560 struct mvneta_rx_queue *rxq, 561 int buf_size) 562 { 563 u32 val; 564 565 val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id)); 566 567 val &= ~MVNETA_RXQ_BUF_SIZE_MASK; 568 val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT); 569 570 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val); 571 } 572 573 static int mvneta_port_is_fixed_link(struct mvneta_port *pp) 574 { 575 /* phy_addr is set to invalid value for fixed link */ 576 return pp->phyaddr > PHY_MAX_ADDR; 577 } 578 579 580 /* Start the Ethernet port RX and TX activity */ 581 static void mvneta_port_up(struct mvneta_port *pp) 582 { 583 int queue; 584 u32 q_map; 585 586 /* Enable all initialized TXs. */ 587 mvneta_mib_counters_clear(pp); 588 q_map = 0; 589 for (queue = 0; queue < txq_number; queue++) { 590 struct mvneta_tx_queue *txq = &pp->txqs[queue]; 591 if (txq->descs != NULL) 592 q_map |= (1 << queue); 593 } 594 mvreg_write(pp, MVNETA_TXQ_CMD, q_map); 595 596 /* Enable all initialized RXQs. */ 597 q_map = 0; 598 for (queue = 0; queue < rxq_number; queue++) { 599 struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; 600 if (rxq->descs != NULL) 601 q_map |= (1 << queue); 602 } 603 mvreg_write(pp, MVNETA_RXQ_CMD, q_map); 604 } 605 606 /* Stop the Ethernet port activity */ 607 static void mvneta_port_down(struct mvneta_port *pp) 608 { 609 u32 val; 610 int count; 611 612 /* Stop Rx port activity. Check port Rx activity. */ 613 val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK; 614 615 /* Issue stop command for active channels only */ 616 if (val != 0) 617 mvreg_write(pp, MVNETA_RXQ_CMD, 618 val << MVNETA_RXQ_DISABLE_SHIFT); 619 620 /* Wait for all Rx activity to terminate. */ 621 count = 0; 622 do { 623 if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) { 624 netdev_warn(pp->dev, 625 "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n", 626 val); 627 break; 628 } 629 mdelay(1); 630 631 val = mvreg_read(pp, MVNETA_RXQ_CMD); 632 } while (val & 0xff); 633 634 /* Stop Tx port activity. Check port Tx activity. Issue stop 635 * command for active channels only 636 */ 637 val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK; 638 639 if (val != 0) 640 mvreg_write(pp, MVNETA_TXQ_CMD, 641 (val << MVNETA_TXQ_DISABLE_SHIFT)); 642 643 /* Wait for all Tx activity to terminate. */ 644 count = 0; 645 do { 646 if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) { 647 netdev_warn(pp->dev, 648 "TIMEOUT for TX stopped status=0x%08x\n", 649 val); 650 break; 651 } 652 mdelay(1); 653 654 /* Check TX Command reg that all Txqs are stopped */ 655 val = mvreg_read(pp, MVNETA_TXQ_CMD); 656 657 } while (val & 0xff); 658 659 /* Double check to verify that TX FIFO is empty */ 660 count = 0; 661 do { 662 if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) { 663 netdev_warn(pp->dev, 664 "TX FIFO empty timeout status=0x08%x\n", 665 val); 666 break; 667 } 668 mdelay(1); 669 670 val = mvreg_read(pp, MVNETA_PORT_STATUS); 671 } while (!(val & MVNETA_TX_FIFO_EMPTY) && 672 (val & MVNETA_TX_IN_PRGRS)); 673 674 udelay(200); 675 } 676 677 /* Enable the port by setting the port enable bit of the MAC control register */ 678 static void mvneta_port_enable(struct mvneta_port *pp) 679 { 680 u32 val; 681 682 /* Enable port */ 683 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); 684 val |= MVNETA_GMAC0_PORT_ENABLE; 685 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); 686 } 687 688 /* Disable the port and wait for about 200 usec before retuning */ 689 static void mvneta_port_disable(struct mvneta_port *pp) 690 { 691 u32 val; 692 693 /* Reset the Enable bit in the Serial Control Register */ 694 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); 695 val &= ~MVNETA_GMAC0_PORT_ENABLE; 696 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); 697 698 udelay(200); 699 } 700 701 /* Multicast tables methods */ 702 703 /* Set all entries in Unicast MAC Table; queue==-1 means reject all */ 704 static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue) 705 { 706 int offset; 707 u32 val; 708 709 if (queue == -1) { 710 val = 0; 711 } else { 712 val = 0x1 | (queue << 1); 713 val |= (val << 24) | (val << 16) | (val << 8); 714 } 715 716 for (offset = 0; offset <= 0xc; offset += 4) 717 mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val); 718 } 719 720 /* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */ 721 static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue) 722 { 723 int offset; 724 u32 val; 725 726 if (queue == -1) { 727 val = 0; 728 } else { 729 val = 0x1 | (queue << 1); 730 val |= (val << 24) | (val << 16) | (val << 8); 731 } 732 733 for (offset = 0; offset <= 0xfc; offset += 4) 734 mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val); 735 } 736 737 /* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */ 738 static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue) 739 { 740 int offset; 741 u32 val; 742 743 if (queue == -1) { 744 memset(pp->mcast_count, 0, sizeof(pp->mcast_count)); 745 val = 0; 746 } else { 747 memset(pp->mcast_count, 1, sizeof(pp->mcast_count)); 748 val = 0x1 | (queue << 1); 749 val |= (val << 24) | (val << 16) | (val << 8); 750 } 751 752 for (offset = 0; offset <= 0xfc; offset += 4) 753 mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val); 754 } 755 756 /* This method sets defaults to the NETA port: 757 * Clears interrupt Cause and Mask registers. 758 * Clears all MAC tables. 759 * Sets defaults to all registers. 760 * Resets RX and TX descriptor rings. 761 * Resets PHY. 762 * This method can be called after mvneta_port_down() to return the port 763 * settings to defaults. 764 */ 765 static void mvneta_defaults_set(struct mvneta_port *pp) 766 { 767 int cpu; 768 int queue; 769 u32 val; 770 771 /* Clear all Cause registers */ 772 mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0); 773 mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0); 774 mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); 775 776 /* Mask all interrupts */ 777 mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0); 778 mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0); 779 mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0); 780 mvreg_write(pp, MVNETA_INTR_ENABLE, 0); 781 782 /* Enable MBUS Retry bit16 */ 783 mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20); 784 785 /* Set CPU queue access map - all CPUs have access to all RX 786 * queues and to all TX queues 787 */ 788 for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) 789 mvreg_write(pp, MVNETA_CPU_MAP(cpu), 790 (MVNETA_CPU_RXQ_ACCESS_ALL_MASK | 791 MVNETA_CPU_TXQ_ACCESS_ALL_MASK)); 792 793 /* Reset RX and TX DMAs */ 794 mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET); 795 mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET); 796 797 /* Disable Legacy WRR, Disable EJP, Release from reset */ 798 mvreg_write(pp, MVNETA_TXQ_CMD_1, 0); 799 for (queue = 0; queue < txq_number; queue++) { 800 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0); 801 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0); 802 } 803 804 mvreg_write(pp, MVNETA_PORT_TX_RESET, 0); 805 mvreg_write(pp, MVNETA_PORT_RX_RESET, 0); 806 807 /* Set Port Acceleration Mode */ 808 val = MVNETA_ACC_MODE_EXT; 809 mvreg_write(pp, MVNETA_ACC_MODE, val); 810 811 /* Update val of portCfg register accordingly with all RxQueue types */ 812 val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def); 813 mvreg_write(pp, MVNETA_PORT_CONFIG, val); 814 815 val = 0; 816 mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val); 817 mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64); 818 819 /* Build PORT_SDMA_CONFIG_REG */ 820 val = 0; 821 822 /* Default burst size */ 823 val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); 824 val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); 825 val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP; 826 827 /* Assign port SDMA configuration */ 828 mvreg_write(pp, MVNETA_SDMA_CONFIG, val); 829 830 /* Enable PHY polling in hardware if not in fixed-link mode */ 831 if (!mvneta_port_is_fixed_link(pp)) { 832 val = mvreg_read(pp, MVNETA_UNIT_CONTROL); 833 val |= MVNETA_PHY_POLLING_ENABLE; 834 mvreg_write(pp, MVNETA_UNIT_CONTROL, val); 835 } 836 837 mvneta_set_ucast_table(pp, -1); 838 mvneta_set_special_mcast_table(pp, -1); 839 mvneta_set_other_mcast_table(pp, -1); 840 } 841 842 /* Set unicast address */ 843 static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble, 844 int queue) 845 { 846 unsigned int unicast_reg; 847 unsigned int tbl_offset; 848 unsigned int reg_offset; 849 850 /* Locate the Unicast table entry */ 851 last_nibble = (0xf & last_nibble); 852 853 /* offset from unicast tbl base */ 854 tbl_offset = (last_nibble / 4) * 4; 855 856 /* offset within the above reg */ 857 reg_offset = last_nibble % 4; 858 859 unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset)); 860 861 if (queue == -1) { 862 /* Clear accepts frame bit at specified unicast DA tbl entry */ 863 unicast_reg &= ~(0xff << (8 * reg_offset)); 864 } else { 865 unicast_reg &= ~(0xff << (8 * reg_offset)); 866 unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset)); 867 } 868 869 mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg); 870 } 871 872 /* Set mac address */ 873 static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr, 874 int queue) 875 { 876 unsigned int mac_h; 877 unsigned int mac_l; 878 879 if (queue != -1) { 880 mac_l = (addr[4] << 8) | (addr[5]); 881 mac_h = (addr[0] << 24) | (addr[1] << 16) | 882 (addr[2] << 8) | (addr[3] << 0); 883 884 mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l); 885 mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h); 886 } 887 888 /* Accept frames of this address */ 889 mvneta_set_ucast_addr(pp, addr[5], queue); 890 } 891 892 static int mvneta_write_hwaddr(struct udevice *dev) 893 { 894 mvneta_mac_addr_set(dev_get_priv(dev), 895 ((struct eth_pdata *)dev_get_platdata(dev))->enetaddr, 896 rxq_def); 897 898 return 0; 899 } 900 901 /* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */ 902 static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc, 903 u32 phys_addr, u32 cookie) 904 { 905 rx_desc->buf_cookie = cookie; 906 rx_desc->buf_phys_addr = phys_addr; 907 } 908 909 /* Decrement sent descriptors counter */ 910 static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp, 911 struct mvneta_tx_queue *txq, 912 int sent_desc) 913 { 914 u32 val; 915 916 /* Only 255 TX descriptors can be updated at once */ 917 while (sent_desc > 0xff) { 918 val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT; 919 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 920 sent_desc = sent_desc - 0xff; 921 } 922 923 val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT; 924 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); 925 } 926 927 /* Get number of TX descriptors already sent by HW */ 928 static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp, 929 struct mvneta_tx_queue *txq) 930 { 931 u32 val; 932 int sent_desc; 933 934 val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id)); 935 sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >> 936 MVNETA_TXQ_SENT_DESC_SHIFT; 937 938 return sent_desc; 939 } 940 941 /* Display more error info */ 942 static void mvneta_rx_error(struct mvneta_port *pp, 943 struct mvneta_rx_desc *rx_desc) 944 { 945 u32 status = rx_desc->status; 946 947 if (!mvneta_rxq_desc_is_first_last(status)) { 948 netdev_err(pp->dev, 949 "bad rx status %08x (buffer oversize), size=%d\n", 950 status, rx_desc->data_size); 951 return; 952 } 953 954 switch (status & MVNETA_RXD_ERR_CODE_MASK) { 955 case MVNETA_RXD_ERR_CRC: 956 netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n", 957 status, rx_desc->data_size); 958 break; 959 case MVNETA_RXD_ERR_OVERRUN: 960 netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n", 961 status, rx_desc->data_size); 962 break; 963 case MVNETA_RXD_ERR_LEN: 964 netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n", 965 status, rx_desc->data_size); 966 break; 967 case MVNETA_RXD_ERR_RESOURCE: 968 netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n", 969 status, rx_desc->data_size); 970 break; 971 } 972 } 973 974 static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp, 975 int rxq) 976 { 977 return &pp->rxqs[rxq]; 978 } 979 980 981 /* Drop packets received by the RXQ and free buffers */ 982 static void mvneta_rxq_drop_pkts(struct mvneta_port *pp, 983 struct mvneta_rx_queue *rxq) 984 { 985 int rx_done; 986 987 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); 988 if (rx_done) 989 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); 990 } 991 992 /* Handle rxq fill: allocates rxq skbs; called when initializing a port */ 993 static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, 994 int num) 995 { 996 int i; 997 998 for (i = 0; i < num; i++) { 999 u32 addr; 1000 1001 /* U-Boot special: Fill in the rx buffer addresses */ 1002 addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE); 1003 mvneta_rx_desc_fill(rxq->descs + i, addr, addr); 1004 } 1005 1006 /* Add this number of RX descriptors as non occupied (ready to 1007 * get packets) 1008 */ 1009 mvneta_rxq_non_occup_desc_add(pp, rxq, i); 1010 1011 return 0; 1012 } 1013 1014 /* Rx/Tx queue initialization/cleanup methods */ 1015 1016 /* Create a specified RX queue */ 1017 static int mvneta_rxq_init(struct mvneta_port *pp, 1018 struct mvneta_rx_queue *rxq) 1019 1020 { 1021 rxq->size = pp->rx_ring_size; 1022 1023 /* Allocate memory for RX descriptors */ 1024 rxq->descs_phys = (dma_addr_t)rxq->descs; 1025 if (rxq->descs == NULL) 1026 return -ENOMEM; 1027 1028 WARN_ON(rxq->descs != PTR_ALIGN(rxq->descs, ARCH_DMA_MINALIGN)); 1029 1030 rxq->last_desc = rxq->size - 1; 1031 1032 /* Set Rx descriptors queue starting address */ 1033 mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys); 1034 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size); 1035 1036 /* Fill RXQ with buffers from RX pool */ 1037 mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE); 1038 mvneta_rxq_fill(pp, rxq, rxq->size); 1039 1040 return 0; 1041 } 1042 1043 /* Cleanup Rx queue */ 1044 static void mvneta_rxq_deinit(struct mvneta_port *pp, 1045 struct mvneta_rx_queue *rxq) 1046 { 1047 mvneta_rxq_drop_pkts(pp, rxq); 1048 1049 rxq->descs = NULL; 1050 rxq->last_desc = 0; 1051 rxq->next_desc_to_proc = 0; 1052 rxq->descs_phys = 0; 1053 } 1054 1055 /* Create and initialize a tx queue */ 1056 static int mvneta_txq_init(struct mvneta_port *pp, 1057 struct mvneta_tx_queue *txq) 1058 { 1059 txq->size = pp->tx_ring_size; 1060 1061 /* Allocate memory for TX descriptors */ 1062 txq->descs_phys = (dma_addr_t)txq->descs; 1063 if (txq->descs == NULL) 1064 return -ENOMEM; 1065 1066 WARN_ON(txq->descs != PTR_ALIGN(txq->descs, ARCH_DMA_MINALIGN)); 1067 1068 txq->last_desc = txq->size - 1; 1069 1070 /* Set maximum bandwidth for enabled TXQs */ 1071 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff); 1072 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff); 1073 1074 /* Set Tx descriptors queue starting address */ 1075 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys); 1076 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size); 1077 1078 return 0; 1079 } 1080 1081 /* Free allocated resources when mvneta_txq_init() fails to allocate memory*/ 1082 static void mvneta_txq_deinit(struct mvneta_port *pp, 1083 struct mvneta_tx_queue *txq) 1084 { 1085 txq->descs = NULL; 1086 txq->last_desc = 0; 1087 txq->next_desc_to_proc = 0; 1088 txq->descs_phys = 0; 1089 1090 /* Set minimum bandwidth for disabled TXQs */ 1091 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0); 1092 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0); 1093 1094 /* Set Tx descriptors queue starting address and size */ 1095 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0); 1096 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0); 1097 } 1098 1099 /* Cleanup all Tx queues */ 1100 static void mvneta_cleanup_txqs(struct mvneta_port *pp) 1101 { 1102 int queue; 1103 1104 for (queue = 0; queue < txq_number; queue++) 1105 mvneta_txq_deinit(pp, &pp->txqs[queue]); 1106 } 1107 1108 /* Cleanup all Rx queues */ 1109 static void mvneta_cleanup_rxqs(struct mvneta_port *pp) 1110 { 1111 int queue; 1112 1113 for (queue = 0; queue < rxq_number; queue++) 1114 mvneta_rxq_deinit(pp, &pp->rxqs[queue]); 1115 } 1116 1117 1118 /* Init all Rx queues */ 1119 static int mvneta_setup_rxqs(struct mvneta_port *pp) 1120 { 1121 int queue; 1122 1123 for (queue = 0; queue < rxq_number; queue++) { 1124 int err = mvneta_rxq_init(pp, &pp->rxqs[queue]); 1125 if (err) { 1126 netdev_err(pp->dev, "%s: can't create rxq=%d\n", 1127 __func__, queue); 1128 mvneta_cleanup_rxqs(pp); 1129 return err; 1130 } 1131 } 1132 1133 return 0; 1134 } 1135 1136 /* Init all tx queues */ 1137 static int mvneta_setup_txqs(struct mvneta_port *pp) 1138 { 1139 int queue; 1140 1141 for (queue = 0; queue < txq_number; queue++) { 1142 int err = mvneta_txq_init(pp, &pp->txqs[queue]); 1143 if (err) { 1144 netdev_err(pp->dev, "%s: can't create txq=%d\n", 1145 __func__, queue); 1146 mvneta_cleanup_txqs(pp); 1147 return err; 1148 } 1149 } 1150 1151 return 0; 1152 } 1153 1154 static void mvneta_start_dev(struct mvneta_port *pp) 1155 { 1156 /* start the Rx/Tx activity */ 1157 mvneta_port_enable(pp); 1158 } 1159 1160 static void mvneta_adjust_link(struct udevice *dev) 1161 { 1162 struct mvneta_port *pp = dev_get_priv(dev); 1163 struct phy_device *phydev = pp->phydev; 1164 int status_change = 0; 1165 1166 if (mvneta_port_is_fixed_link(pp)) { 1167 debug("Using fixed link, skip link adjust\n"); 1168 return; 1169 } 1170 1171 if (phydev->link) { 1172 if ((pp->speed != phydev->speed) || 1173 (pp->duplex != phydev->duplex)) { 1174 u32 val; 1175 1176 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); 1177 val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | 1178 MVNETA_GMAC_CONFIG_GMII_SPEED | 1179 MVNETA_GMAC_CONFIG_FULL_DUPLEX | 1180 MVNETA_GMAC_AN_SPEED_EN | 1181 MVNETA_GMAC_AN_DUPLEX_EN); 1182 1183 if (phydev->duplex) 1184 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; 1185 1186 if (phydev->speed == SPEED_1000) 1187 val |= MVNETA_GMAC_CONFIG_GMII_SPEED; 1188 else 1189 val |= MVNETA_GMAC_CONFIG_MII_SPEED; 1190 1191 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1192 1193 pp->duplex = phydev->duplex; 1194 pp->speed = phydev->speed; 1195 } 1196 } 1197 1198 if (phydev->link != pp->link) { 1199 if (!phydev->link) { 1200 pp->duplex = -1; 1201 pp->speed = 0; 1202 } 1203 1204 pp->link = phydev->link; 1205 status_change = 1; 1206 } 1207 1208 if (status_change) { 1209 if (phydev->link) { 1210 u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); 1211 val |= (MVNETA_GMAC_FORCE_LINK_PASS | 1212 MVNETA_GMAC_FORCE_LINK_DOWN); 1213 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1214 mvneta_port_up(pp); 1215 } else { 1216 mvneta_port_down(pp); 1217 } 1218 } 1219 } 1220 1221 static int mvneta_open(struct udevice *dev) 1222 { 1223 struct mvneta_port *pp = dev_get_priv(dev); 1224 int ret; 1225 1226 ret = mvneta_setup_rxqs(pp); 1227 if (ret) 1228 return ret; 1229 1230 ret = mvneta_setup_txqs(pp); 1231 if (ret) 1232 return ret; 1233 1234 mvneta_adjust_link(dev); 1235 1236 mvneta_start_dev(pp); 1237 1238 return 0; 1239 } 1240 1241 /* Initialize hw */ 1242 static int mvneta_init2(struct mvneta_port *pp) 1243 { 1244 int queue; 1245 1246 /* Disable port */ 1247 mvneta_port_disable(pp); 1248 1249 /* Set port default values */ 1250 mvneta_defaults_set(pp); 1251 1252 pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue), 1253 GFP_KERNEL); 1254 if (!pp->txqs) 1255 return -ENOMEM; 1256 1257 /* U-Boot special: use preallocated area */ 1258 pp->txqs[0].descs = buffer_loc.tx_descs; 1259 1260 /* Initialize TX descriptor rings */ 1261 for (queue = 0; queue < txq_number; queue++) { 1262 struct mvneta_tx_queue *txq = &pp->txqs[queue]; 1263 txq->id = queue; 1264 txq->size = pp->tx_ring_size; 1265 } 1266 1267 pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue), 1268 GFP_KERNEL); 1269 if (!pp->rxqs) { 1270 kfree(pp->txqs); 1271 return -ENOMEM; 1272 } 1273 1274 /* U-Boot special: use preallocated area */ 1275 pp->rxqs[0].descs = buffer_loc.rx_descs; 1276 1277 /* Create Rx descriptor rings */ 1278 for (queue = 0; queue < rxq_number; queue++) { 1279 struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; 1280 rxq->id = queue; 1281 rxq->size = pp->rx_ring_size; 1282 } 1283 1284 return 0; 1285 } 1286 1287 /* platform glue : initialize decoding windows */ 1288 1289 /* 1290 * Not like A380, in Armada3700, there are two layers of decode windows for GBE: 1291 * First layer is: GbE Address window that resides inside the GBE unit, 1292 * Second layer is: Fabric address window which is located in the NIC400 1293 * (South Fabric). 1294 * To simplify the address decode configuration for Armada3700, we bypass the 1295 * first layer of GBE decode window by setting the first window to 4GB. 1296 */ 1297 static void mvneta_bypass_mbus_windows(struct mvneta_port *pp) 1298 { 1299 /* 1300 * Set window size to 4GB, to bypass GBE address decode, leave the 1301 * work to MBUS decode window 1302 */ 1303 mvreg_write(pp, MVNETA_WIN_SIZE(0), MVNETA_WIN_SIZE_MASK); 1304 1305 /* Enable GBE address decode window 0 by set bit 0 to 0 */ 1306 clrbits_le32(pp->base + MVNETA_BASE_ADDR_ENABLE, 1307 MVNETA_BASE_ADDR_ENABLE_BIT); 1308 1309 /* Set GBE address decode window 0 to full Access (read or write) */ 1310 setbits_le32(pp->base + MVNETA_PORT_ACCESS_PROTECT, 1311 MVNETA_PORT_ACCESS_PROTECT_WIN0_RW); 1312 } 1313 1314 static void mvneta_conf_mbus_windows(struct mvneta_port *pp) 1315 { 1316 const struct mbus_dram_target_info *dram; 1317 u32 win_enable; 1318 u32 win_protect; 1319 int i; 1320 1321 dram = mvebu_mbus_dram_info(); 1322 for (i = 0; i < 6; i++) { 1323 mvreg_write(pp, MVNETA_WIN_BASE(i), 0); 1324 mvreg_write(pp, MVNETA_WIN_SIZE(i), 0); 1325 1326 if (i < 4) 1327 mvreg_write(pp, MVNETA_WIN_REMAP(i), 0); 1328 } 1329 1330 win_enable = 0x3f; 1331 win_protect = 0; 1332 1333 for (i = 0; i < dram->num_cs; i++) { 1334 const struct mbus_dram_window *cs = dram->cs + i; 1335 mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) | 1336 (cs->mbus_attr << 8) | dram->mbus_dram_target_id); 1337 1338 mvreg_write(pp, MVNETA_WIN_SIZE(i), 1339 (cs->size - 1) & 0xffff0000); 1340 1341 win_enable &= ~(1 << i); 1342 win_protect |= 3 << (2 * i); 1343 } 1344 1345 mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable); 1346 } 1347 1348 /* Power up the port */ 1349 static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) 1350 { 1351 u32 ctrl; 1352 1353 /* MAC Cause register should be cleared */ 1354 mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); 1355 1356 ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2); 1357 1358 /* Even though it might look weird, when we're configured in 1359 * SGMII or QSGMII mode, the RGMII bit needs to be set. 1360 */ 1361 switch (phy_mode) { 1362 case PHY_INTERFACE_MODE_QSGMII: 1363 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); 1364 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; 1365 break; 1366 case PHY_INTERFACE_MODE_SGMII: 1367 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); 1368 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; 1369 break; 1370 case PHY_INTERFACE_MODE_RGMII: 1371 case PHY_INTERFACE_MODE_RGMII_ID: 1372 ctrl |= MVNETA_GMAC2_PORT_RGMII; 1373 break; 1374 default: 1375 return -EINVAL; 1376 } 1377 1378 /* Cancel Port Reset */ 1379 ctrl &= ~MVNETA_GMAC2_PORT_RESET; 1380 mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl); 1381 1382 while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) & 1383 MVNETA_GMAC2_PORT_RESET) != 0) 1384 continue; 1385 1386 return 0; 1387 } 1388 1389 /* Device initialization routine */ 1390 static int mvneta_init(struct udevice *dev) 1391 { 1392 struct eth_pdata *pdata = dev_get_platdata(dev); 1393 struct mvneta_port *pp = dev_get_priv(dev); 1394 int err; 1395 1396 pp->tx_ring_size = MVNETA_MAX_TXD; 1397 pp->rx_ring_size = MVNETA_MAX_RXD; 1398 1399 err = mvneta_init2(pp); 1400 if (err < 0) { 1401 dev_err(&pdev->dev, "can't init eth hal\n"); 1402 return err; 1403 } 1404 1405 mvneta_mac_addr_set(pp, pdata->enetaddr, rxq_def); 1406 1407 err = mvneta_port_power_up(pp, pp->phy_interface); 1408 if (err < 0) { 1409 dev_err(&pdev->dev, "can't power up port\n"); 1410 return err; 1411 } 1412 1413 /* Call open() now as it needs to be done before runing send() */ 1414 mvneta_open(dev); 1415 1416 return 0; 1417 } 1418 1419 /* U-Boot only functions follow here */ 1420 1421 /* SMI / MDIO functions */ 1422 1423 static int smi_wait_ready(struct mvneta_port *pp) 1424 { 1425 u32 timeout = MVNETA_SMI_TIMEOUT; 1426 u32 smi_reg; 1427 1428 /* wait till the SMI is not busy */ 1429 do { 1430 /* read smi register */ 1431 smi_reg = mvreg_read(pp, MVNETA_SMI); 1432 if (timeout-- == 0) { 1433 printf("Error: SMI busy timeout\n"); 1434 return -EFAULT; 1435 } 1436 } while (smi_reg & MVNETA_SMI_BUSY); 1437 1438 return 0; 1439 } 1440 1441 /* 1442 * mvneta_mdio_read - miiphy_read callback function. 1443 * 1444 * Returns 16bit phy register value, or 0xffff on error 1445 */ 1446 static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) 1447 { 1448 struct mvneta_port *pp = bus->priv; 1449 u32 smi_reg; 1450 u32 timeout; 1451 1452 /* check parameters */ 1453 if (addr > MVNETA_PHY_ADDR_MASK) { 1454 printf("Error: Invalid PHY address %d\n", addr); 1455 return -EFAULT; 1456 } 1457 1458 if (reg > MVNETA_PHY_REG_MASK) { 1459 printf("Err: Invalid register offset %d\n", reg); 1460 return -EFAULT; 1461 } 1462 1463 /* wait till the SMI is not busy */ 1464 if (smi_wait_ready(pp) < 0) 1465 return -EFAULT; 1466 1467 /* fill the phy address and regiser offset and read opcode */ 1468 smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS) 1469 | (reg << MVNETA_SMI_REG_ADDR_OFFS) 1470 | MVNETA_SMI_OPCODE_READ; 1471 1472 /* write the smi register */ 1473 mvreg_write(pp, MVNETA_SMI, smi_reg); 1474 1475 /* wait till read value is ready */ 1476 timeout = MVNETA_SMI_TIMEOUT; 1477 1478 do { 1479 /* read smi register */ 1480 smi_reg = mvreg_read(pp, MVNETA_SMI); 1481 if (timeout-- == 0) { 1482 printf("Err: SMI read ready timeout\n"); 1483 return -EFAULT; 1484 } 1485 } while (!(smi_reg & MVNETA_SMI_READ_VALID)); 1486 1487 /* Wait for the data to update in the SMI register */ 1488 for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++) 1489 ; 1490 1491 return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK; 1492 } 1493 1494 /* 1495 * mvneta_mdio_write - miiphy_write callback function. 1496 * 1497 * Returns 0 if write succeed, -EINVAL on bad parameters 1498 * -ETIME on timeout 1499 */ 1500 static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, 1501 u16 value) 1502 { 1503 struct mvneta_port *pp = bus->priv; 1504 u32 smi_reg; 1505 1506 /* check parameters */ 1507 if (addr > MVNETA_PHY_ADDR_MASK) { 1508 printf("Error: Invalid PHY address %d\n", addr); 1509 return -EFAULT; 1510 } 1511 1512 if (reg > MVNETA_PHY_REG_MASK) { 1513 printf("Err: Invalid register offset %d\n", reg); 1514 return -EFAULT; 1515 } 1516 1517 /* wait till the SMI is not busy */ 1518 if (smi_wait_ready(pp) < 0) 1519 return -EFAULT; 1520 1521 /* fill the phy addr and reg offset and write opcode and data */ 1522 smi_reg = value << MVNETA_SMI_DATA_OFFS; 1523 smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS) 1524 | (reg << MVNETA_SMI_REG_ADDR_OFFS); 1525 smi_reg &= ~MVNETA_SMI_OPCODE_READ; 1526 1527 /* write the smi register */ 1528 mvreg_write(pp, MVNETA_SMI, smi_reg); 1529 1530 return 0; 1531 } 1532 1533 static int mvneta_start(struct udevice *dev) 1534 { 1535 struct mvneta_port *pp = dev_get_priv(dev); 1536 struct phy_device *phydev; 1537 1538 mvneta_port_power_up(pp, pp->phy_interface); 1539 1540 if (!pp->init || pp->link == 0) { 1541 if (mvneta_port_is_fixed_link(pp)) { 1542 u32 val; 1543 1544 pp->init = 1; 1545 pp->link = 1; 1546 mvneta_init(dev); 1547 1548 val = MVNETA_GMAC_FORCE_LINK_UP | 1549 MVNETA_GMAC_IB_BYPASS_AN_EN | 1550 MVNETA_GMAC_SET_FC_EN | 1551 MVNETA_GMAC_ADVERT_FC_EN | 1552 MVNETA_GMAC_SAMPLE_TX_CFG_EN; 1553 1554 if (pp->duplex) 1555 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; 1556 1557 if (pp->speed == SPEED_1000) 1558 val |= MVNETA_GMAC_CONFIG_GMII_SPEED; 1559 else if (pp->speed == SPEED_100) 1560 val |= MVNETA_GMAC_CONFIG_MII_SPEED; 1561 1562 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); 1563 } else { 1564 /* Set phy address of the port */ 1565 mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr); 1566 1567 phydev = phy_connect(pp->bus, pp->phyaddr, dev, 1568 pp->phy_interface); 1569 if (!phydev) { 1570 printf("phy_connect failed\n"); 1571 return -ENODEV; 1572 } 1573 1574 pp->phydev = phydev; 1575 phy_config(phydev); 1576 phy_startup(phydev); 1577 if (!phydev->link) { 1578 printf("%s: No link.\n", phydev->dev->name); 1579 return -1; 1580 } 1581 1582 /* Full init on first call */ 1583 mvneta_init(dev); 1584 pp->init = 1; 1585 return 0; 1586 } 1587 } 1588 1589 /* Upon all following calls, this is enough */ 1590 mvneta_port_up(pp); 1591 mvneta_port_enable(pp); 1592 1593 return 0; 1594 } 1595 1596 static int mvneta_send(struct udevice *dev, void *packet, int length) 1597 { 1598 struct mvneta_port *pp = dev_get_priv(dev); 1599 struct mvneta_tx_queue *txq = &pp->txqs[0]; 1600 struct mvneta_tx_desc *tx_desc; 1601 int sent_desc; 1602 u32 timeout = 0; 1603 1604 /* Get a descriptor for the first part of the packet */ 1605 tx_desc = mvneta_txq_next_desc_get(txq); 1606 1607 tx_desc->buf_phys_addr = (u32)(uintptr_t)packet; 1608 tx_desc->data_size = length; 1609 flush_dcache_range((ulong)packet, 1610 (ulong)packet + ALIGN(length, PKTALIGN)); 1611 1612 /* First and Last descriptor */ 1613 tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC; 1614 mvneta_txq_pend_desc_add(pp, txq, 1); 1615 1616 /* Wait for packet to be sent (queue might help with speed here) */ 1617 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); 1618 while (!sent_desc) { 1619 if (timeout++ > 10000) { 1620 printf("timeout: packet not sent\n"); 1621 return -1; 1622 } 1623 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); 1624 } 1625 1626 /* txDone has increased - hw sent packet */ 1627 mvneta_txq_sent_desc_dec(pp, txq, sent_desc); 1628 1629 return 0; 1630 } 1631 1632 static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp) 1633 { 1634 struct mvneta_port *pp = dev_get_priv(dev); 1635 int rx_done; 1636 struct mvneta_rx_queue *rxq; 1637 int rx_bytes = 0; 1638 1639 /* get rx queue */ 1640 rxq = mvneta_rxq_handle_get(pp, rxq_def); 1641 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); 1642 1643 if (rx_done) { 1644 struct mvneta_rx_desc *rx_desc; 1645 unsigned char *data; 1646 u32 rx_status; 1647 1648 /* 1649 * No cache invalidation needed here, since the desc's are 1650 * located in a uncached memory region 1651 */ 1652 rx_desc = mvneta_rxq_next_desc_get(rxq); 1653 1654 rx_status = rx_desc->status; 1655 if (!mvneta_rxq_desc_is_first_last(rx_status) || 1656 (rx_status & MVNETA_RXD_ERR_SUMMARY)) { 1657 mvneta_rx_error(pp, rx_desc); 1658 /* leave the descriptor untouched */ 1659 return -EIO; 1660 } 1661 1662 /* 2 bytes for marvell header. 4 bytes for crc */ 1663 rx_bytes = rx_desc->data_size - 6; 1664 1665 /* give packet to stack - skip on first 2 bytes */ 1666 data = (u8 *)(uintptr_t)rx_desc->buf_cookie + 2; 1667 /* 1668 * No cache invalidation needed here, since the rx_buffer's are 1669 * located in a uncached memory region 1670 */ 1671 *packetp = data; 1672 1673 /* 1674 * Only mark one descriptor as free 1675 * since only one was processed 1676 */ 1677 mvneta_rxq_desc_num_update(pp, rxq, 1, 1); 1678 } 1679 1680 return rx_bytes; 1681 } 1682 1683 static int mvneta_probe(struct udevice *dev) 1684 { 1685 struct eth_pdata *pdata = dev_get_platdata(dev); 1686 struct mvneta_port *pp = dev_get_priv(dev); 1687 void *blob = (void *)gd->fdt_blob; 1688 int node = dev_of_offset(dev); 1689 struct mii_dev *bus; 1690 unsigned long addr; 1691 void *bd_space; 1692 int ret; 1693 int fl_node; 1694 1695 /* 1696 * Allocate buffer area for descs and rx_buffers. This is only 1697 * done once for all interfaces. As only one interface can 1698 * be active. Make this area DMA safe by disabling the D-cache 1699 */ 1700 if (!buffer_loc.tx_descs) { 1701 u32 size; 1702 1703 /* Align buffer area for descs and rx_buffers to 1MiB */ 1704 bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); 1705 mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE, 1706 DCACHE_OFF); 1707 buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space; 1708 size = roundup(MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc), 1709 ARCH_DMA_MINALIGN); 1710 buffer_loc.rx_descs = (struct mvneta_rx_desc *) 1711 ((phys_addr_t)bd_space + size); 1712 size += roundup(MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc), 1713 ARCH_DMA_MINALIGN); 1714 buffer_loc.rx_buffers = (phys_addr_t)(bd_space + size); 1715 } 1716 1717 pp->base = (void __iomem *)pdata->iobase; 1718 1719 /* Configure MBUS address windows */ 1720 if (device_is_compatible(dev, "marvell,armada-3700-neta")) 1721 mvneta_bypass_mbus_windows(pp); 1722 else 1723 mvneta_conf_mbus_windows(pp); 1724 1725 /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */ 1726 pp->phy_interface = pdata->phy_interface; 1727 1728 /* fetch 'fixed-link' property from 'neta' node */ 1729 fl_node = fdt_subnode_offset(blob, node, "fixed-link"); 1730 if (fl_node != -FDT_ERR_NOTFOUND) { 1731 /* set phy_addr to invalid value for fixed link */ 1732 pp->phyaddr = PHY_MAX_ADDR + 1; 1733 pp->duplex = fdtdec_get_bool(blob, fl_node, "full-duplex"); 1734 pp->speed = fdtdec_get_int(blob, fl_node, "speed", 0); 1735 } else { 1736 /* Now read phyaddr from DT */ 1737 addr = fdtdec_get_int(blob, node, "phy", 0); 1738 addr = fdt_node_offset_by_phandle(blob, addr); 1739 pp->phyaddr = fdtdec_get_int(blob, addr, "reg", 0); 1740 } 1741 1742 bus = mdio_alloc(); 1743 if (!bus) { 1744 printf("Failed to allocate MDIO bus\n"); 1745 return -ENOMEM; 1746 } 1747 1748 bus->read = mvneta_mdio_read; 1749 bus->write = mvneta_mdio_write; 1750 snprintf(bus->name, sizeof(bus->name), dev->name); 1751 bus->priv = (void *)pp; 1752 pp->bus = bus; 1753 1754 ret = mdio_register(bus); 1755 if (ret) 1756 return ret; 1757 1758 return board_network_enable(bus); 1759 } 1760 1761 static void mvneta_stop(struct udevice *dev) 1762 { 1763 struct mvneta_port *pp = dev_get_priv(dev); 1764 1765 mvneta_port_down(pp); 1766 mvneta_port_disable(pp); 1767 } 1768 1769 static const struct eth_ops mvneta_ops = { 1770 .start = mvneta_start, 1771 .send = mvneta_send, 1772 .recv = mvneta_recv, 1773 .stop = mvneta_stop, 1774 .write_hwaddr = mvneta_write_hwaddr, 1775 }; 1776 1777 static int mvneta_ofdata_to_platdata(struct udevice *dev) 1778 { 1779 struct eth_pdata *pdata = dev_get_platdata(dev); 1780 const char *phy_mode; 1781 1782 pdata->iobase = devfdt_get_addr(dev); 1783 1784 /* Get phy-mode / phy_interface from DT */ 1785 pdata->phy_interface = -1; 1786 phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode", 1787 NULL); 1788 if (phy_mode) 1789 pdata->phy_interface = phy_get_interface_by_name(phy_mode); 1790 if (pdata->phy_interface == -1) { 1791 debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); 1792 return -EINVAL; 1793 } 1794 1795 return 0; 1796 } 1797 1798 static const struct udevice_id mvneta_ids[] = { 1799 { .compatible = "marvell,armada-370-neta" }, 1800 { .compatible = "marvell,armada-xp-neta" }, 1801 { .compatible = "marvell,armada-3700-neta" }, 1802 { } 1803 }; 1804 1805 U_BOOT_DRIVER(mvneta) = { 1806 .name = "mvneta", 1807 .id = UCLASS_ETH, 1808 .of_match = mvneta_ids, 1809 .ofdata_to_platdata = mvneta_ofdata_to_platdata, 1810 .probe = mvneta_probe, 1811 .ops = &mvneta_ops, 1812 .priv_auto_alloc_size = sizeof(struct mvneta_port), 1813 .platdata_auto_alloc_size = sizeof(struct eth_pdata), 1814 }; 1815