1 /*------------------------------------------------------------------------ 2 * lan91c96.c 3 * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based 4 * on the SMC91111 driver from U-Boot. 5 * 6 * (C) Copyright 2002 7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 8 * Rolf Offermanns <rof@sysgo.de> 9 * 10 * Copyright (C) 2001 Standard Microsystems Corporation (SMSC) 11 * Developed by Simple Network Magic Corporation (SNMC) 12 * Copyright (C) 1996 by Erik Stahlman (ES) 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 * 16 * Information contained in this file was obtained from the LAN91C96 17 * manual from SMC. To get a copy, if you really want one, you can find 18 * information under www.smsc.com. 19 * 20 * "Features" of the SMC chip: 21 * 6144 byte packet memory. ( for the 91C96 ) 22 * EEPROM for configuration 23 * AUI/TP selection ( mine has 10Base2/10BaseT select ) 24 * 25 * Arguments: 26 * io = for the base address 27 * irq = for the IRQ 28 * 29 * author: 30 * Erik Stahlman ( erik@vt.edu ) 31 * Daris A Nevil ( dnevil@snmc.com ) 32 * 33 * 34 * Hardware multicast code from Peter Cammaert ( pc@denkart.be ) 35 * 36 * Sources: 37 * o SMSC LAN91C96 databook (www.smsc.com) 38 * o smc91111.c (u-boot driver) 39 * o smc9194.c (linux kernel driver) 40 * o lan91c96.c (Intel Diagnostic Manager driver) 41 * 42 * History: 43 * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version) 44 * for lan91c96 45 *--------------------------------------------------------------------------- 46 */ 47 48 #include <common.h> 49 #include <command.h> 50 #include <malloc.h> 51 #include "lan91c96.h" 52 #include <net.h> 53 #include <linux/compiler.h> 54 55 /*------------------------------------------------------------------------ 56 * 57 * Configuration options, for the experienced user to change. 58 * 59 -------------------------------------------------------------------------*/ 60 61 /* Use power-down feature of the chip */ 62 #define POWER_DOWN 0 63 64 /* 65 * Wait time for memory to be free. This probably shouldn't be 66 * tuned that much, as waiting for this means nothing else happens 67 * in the system 68 */ 69 #define MEMORY_WAIT_TIME 16 70 71 #define SMC_DEBUG 0 72 73 #if (SMC_DEBUG > 2 ) 74 #define PRINTK3(args...) printf(args) 75 #else 76 #define PRINTK3(args...) 77 #endif 78 79 #if SMC_DEBUG > 1 80 #define PRINTK2(args...) printf(args) 81 #else 82 #define PRINTK2(args...) 83 #endif 84 85 #ifdef SMC_DEBUG 86 #define PRINTK(args...) printf(args) 87 #else 88 #define PRINTK(args...) 89 #endif 90 91 92 /*------------------------------------------------------------------------ 93 * 94 * The internal workings of the driver. If you are changing anything 95 * here with the SMC stuff, you should have the datasheet and know 96 * what you are doing. 97 * 98 *------------------------------------------------------------------------ 99 */ 100 #define DRIVER_NAME "LAN91C96" 101 #define SMC_ALLOC_MAX_TRY 5 102 #define SMC_TX_TIMEOUT 30 103 104 #define ETH_ZLEN 60 105 106 #ifdef CONFIG_LAN91C96_USE_32_BIT 107 #define USE_32_BIT 1 108 #else 109 #undef USE_32_BIT 110 #endif 111 112 /* See if a MAC address is defined in the current environment. If so use it. If not 113 . print a warning and set the environment and other globals with the default. 114 . If an EEPROM is present it really should be consulted. 115 */ 116 static int smc_get_ethaddr(bd_t *bd, struct eth_device *dev); 117 static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac); 118 119 /* ------------------------------------------------------------ 120 * Internal routines 121 * ------------------------------------------------------------ 122 */ 123 124 static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c }; 125 126 /* 127 * This function must be called before smc_open() if you want to override 128 * the default mac address. 129 */ 130 131 static void smc_set_mac_addr(const unsigned char *addr) 132 { 133 int i; 134 135 for (i = 0; i < sizeof (smc_mac_addr); i++) { 136 smc_mac_addr[i] = addr[i]; 137 } 138 } 139 140 /*********************************************** 141 * Show available memory * 142 ***********************************************/ 143 void dump_memory_info(struct eth_device *dev) 144 { 145 __maybe_unused word mem_info; 146 word old_bank; 147 148 old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT) & 0xF; 149 150 SMC_SELECT_BANK(dev, 0); 151 mem_info = SMC_inw(dev, LAN91C96_MIR); 152 PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048); 153 154 SMC_SELECT_BANK(dev, old_bank); 155 } 156 157 /* 158 * A rather simple routine to print out a packet for debugging purposes. 159 */ 160 #if SMC_DEBUG > 2 161 static void print_packet (byte *, int); 162 #endif 163 164 static int poll4int (struct eth_device *dev, byte mask, int timeout) 165 { 166 int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ; 167 int is_timeout = 0; 168 word old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT); 169 170 PRINTK2 ("Polling...\n"); 171 SMC_SELECT_BANK(dev, 2); 172 while ((SMC_inw(dev, LAN91C96_INT_STATS) & mask) == 0) { 173 if (get_timer (0) >= tmo) { 174 is_timeout = 1; 175 break; 176 } 177 } 178 179 /* restore old bank selection */ 180 SMC_SELECT_BANK(dev, old_bank); 181 182 if (is_timeout) 183 return 1; 184 else 185 return 0; 186 } 187 188 /* 189 * Function: smc_reset 190 * Purpose: 191 * This sets the SMC91111 chip to its normal state, hopefully from whatever 192 * mess that any other DOS driver has put it in. 193 * 194 * Maybe I should reset more registers to defaults in here? SOFTRST should 195 * do that for me. 196 * 197 * Method: 198 * 1. send a SOFT RESET 199 * 2. wait for it to finish 200 * 3. enable autorelease mode 201 * 4. reset the memory management unit 202 * 5. clear all interrupts 203 * 204 */ 205 static void smc_reset(struct eth_device *dev) 206 { 207 PRINTK2("%s:smc_reset\n", dev->name); 208 209 /* This resets the registers mostly to defaults, but doesn't 210 affect EEPROM. That seems unnecessary */ 211 SMC_SELECT_BANK(dev, 0); 212 SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR); 213 214 udelay (10); 215 216 /* Disable transmit and receive functionality */ 217 SMC_outw(dev, 0, LAN91C96_RCR); 218 SMC_outw(dev, 0, LAN91C96_TCR); 219 220 /* set the control register */ 221 SMC_SELECT_BANK(dev, 1); 222 SMC_outw(dev, SMC_inw(dev, LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8, 223 LAN91C96_CONTROL); 224 225 /* Disable all interrupts */ 226 SMC_outb(dev, 0, LAN91C96_INT_MASK); 227 } 228 229 /* 230 * Function: smc_enable 231 * Purpose: let the chip talk to the outside work 232 * Method: 233 * 1. Initialize the Memory Configuration Register 234 * 2. Enable the transmitter 235 * 3. Enable the receiver 236 */ 237 static void smc_enable(struct eth_device *dev) 238 { 239 PRINTK2("%s:smc_enable\n", dev->name); 240 SMC_SELECT_BANK(dev, 0); 241 242 /* Initialize the Memory Configuration Register. See page 243 49 of the LAN91C96 data sheet for details. */ 244 SMC_outw(dev, LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR); 245 246 /* Initialize the Transmit Control Register */ 247 SMC_outw(dev, LAN91C96_TCR_TXENA, LAN91C96_TCR); 248 /* Initialize the Receive Control Register 249 * FIXME: 250 * The promiscuous bit set because I could not receive ARP reply 251 * packets from the server when I send a ARP request. It only works 252 * when I set the promiscuous bit 253 */ 254 SMC_outw(dev, LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR); 255 } 256 257 /* 258 * Function: smc_shutdown 259 * Purpose: closes down the SMC91xxx chip. 260 * Method: 261 * 1. zero the interrupt mask 262 * 2. clear the enable receive flag 263 * 3. clear the enable xmit flags 264 * 265 * TODO: 266 * (1) maybe utilize power down mode. 267 * Why not yet? Because while the chip will go into power down mode, 268 * the manual says that it will wake up in response to any I/O requests 269 * in the register space. Empirical results do not show this working. 270 */ 271 static void smc_shutdown(struct eth_device *dev) 272 { 273 PRINTK2("%s:smc_shutdown\n", dev->name); 274 275 /* no more interrupts for me */ 276 SMC_SELECT_BANK(dev, 2); 277 SMC_outb(dev, 0, LAN91C96_INT_MASK); 278 279 /* and tell the card to stay away from that nasty outside world */ 280 SMC_SELECT_BANK(dev, 0); 281 SMC_outb(dev, 0, LAN91C96_RCR); 282 SMC_outb(dev, 0, LAN91C96_TCR); 283 } 284 285 286 /* 287 * Function: smc_hardware_send_packet(struct net_device * ) 288 * Purpose: 289 * This sends the actual packet to the SMC9xxx chip. 290 * 291 * Algorithm: 292 * First, see if a saved_skb is available. 293 * ( this should NOT be called if there is no 'saved_skb' 294 * Now, find the packet number that the chip allocated 295 * Point the data pointers at it in memory 296 * Set the length word in the chip's memory 297 * Dump the packet to chip memory 298 * Check if a last byte is needed ( odd length packet ) 299 * if so, set the control flag right 300 * Tell the card to send it 301 * Enable the transmit interrupt, so I know if it failed 302 * Free the kernel data if I actually sent it. 303 */ 304 static int smc_send_packet(struct eth_device *dev, void *packet, 305 int packet_length) 306 { 307 byte packet_no; 308 byte *buf; 309 int length; 310 int numPages; 311 int try = 0; 312 int time_out; 313 byte status; 314 315 316 PRINTK3("%s:smc_hardware_send_packet\n", dev->name); 317 318 length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN; 319 320 /* allocate memory 321 ** The MMU wants the number of pages to be the number of 256 bytes 322 ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) 323 ** 324 ** The 91C111 ignores the size bits, but the code is left intact 325 ** for backwards and future compatibility. 326 ** 327 ** Pkt size for allocating is data length +6 (for additional status 328 ** words, length and ctl!) 329 ** 330 ** If odd size then last byte is included in this header. 331 */ 332 numPages = ((length & 0xfffe) + 6); 333 numPages >>= 8; /* Divide by 256 */ 334 335 if (numPages > 7) { 336 printf("%s: Far too big packet error. \n", dev->name); 337 return 0; 338 } 339 340 /* now, try to allocate the memory */ 341 342 SMC_SELECT_BANK(dev, 2); 343 SMC_outw(dev, LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU); 344 345 again: 346 try++; 347 time_out = MEMORY_WAIT_TIME; 348 do { 349 status = SMC_inb(dev, LAN91C96_INT_STATS); 350 if (status & LAN91C96_IST_ALLOC_INT) { 351 352 SMC_outb(dev, LAN91C96_IST_ALLOC_INT, 353 LAN91C96_INT_STATS); 354 break; 355 } 356 } while (--time_out); 357 358 if (!time_out) { 359 PRINTK2 ("%s: memory allocation, try %d failed ...\n", 360 dev->name, try); 361 if (try < SMC_ALLOC_MAX_TRY) 362 goto again; 363 else 364 return 0; 365 } 366 367 PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", 368 dev->name, try); 369 370 /* I can send the packet now.. */ 371 buf = (byte *) packet; 372 373 /* If I get here, I _know_ there is a packet slot waiting for me */ 374 packet_no = SMC_inb(dev, LAN91C96_ARR); 375 if (packet_no & LAN91C96_ARR_FAILED) { 376 /* or isn't there? BAD CHIP! */ 377 printf("%s: Memory allocation failed. \n", dev->name); 378 return 0; 379 } 380 381 /* we have a packet address, so tell the card to use it */ 382 SMC_outb(dev, packet_no, LAN91C96_PNR); 383 384 /* point to the beginning of the packet */ 385 SMC_outw(dev, LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); 386 387 PRINTK3("%s: Trying to xmit packet of length %x\n", 388 dev->name, length); 389 390 #if SMC_DEBUG > 2 391 printf ("Transmitting Packet\n"); 392 print_packet (buf, length); 393 #endif 394 395 /* send the packet length ( +6 for status, length and ctl byte ) 396 and the status word ( set to zeros ) */ 397 #ifdef USE_32_BIT 398 SMC_outl(dev, (length + 6) << 16, LAN91C96_DATA_HIGH); 399 #else 400 SMC_outw(dev, 0, LAN91C96_DATA_HIGH); 401 /* send the packet length ( +6 for status words, length, and ctl */ 402 SMC_outw(dev, (length + 6), LAN91C96_DATA_HIGH); 403 #endif /* USE_32_BIT */ 404 405 /* send the actual data 406 * I _think_ it's faster to send the longs first, and then 407 * mop up by sending the last word. It depends heavily 408 * on alignment, at least on the 486. Maybe it would be 409 * a good idea to check which is optimal? But that could take 410 * almost as much time as is saved? 411 */ 412 #ifdef USE_32_BIT 413 SMC_outsl(dev, LAN91C96_DATA_HIGH, buf, length >> 2); 414 if (length & 0x2) 415 SMC_outw(dev, *((word *) (buf + (length & 0xFFFFFFFC))), 416 LAN91C96_DATA_HIGH); 417 #else 418 SMC_outsw(dev, LAN91C96_DATA_HIGH, buf, (length) >> 1); 419 #endif /* USE_32_BIT */ 420 421 /* Send the last byte, if there is one. */ 422 if ((length & 1) == 0) { 423 SMC_outw(dev, 0, LAN91C96_DATA_HIGH); 424 } else { 425 SMC_outw(dev, buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH); 426 } 427 428 /* and let the chipset deal with it */ 429 SMC_outw(dev, LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU); 430 431 /* poll for TX INT */ 432 if (poll4int (dev, LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) { 433 /* sending failed */ 434 PRINTK2("%s: TX timeout, sending failed...\n", dev->name); 435 436 /* release packet */ 437 SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); 438 439 /* wait for MMU getting ready (low) */ 440 while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) 441 udelay (10); 442 443 PRINTK2("MMU ready\n"); 444 445 446 return 0; 447 } else { 448 /* ack. int */ 449 SMC_outw(dev, LAN91C96_IST_TX_INT, LAN91C96_INT_STATS); 450 451 PRINTK2("%s: Sent packet of length %d \n", dev->name, length); 452 453 /* release packet */ 454 SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); 455 456 /* wait for MMU getting ready (low) */ 457 while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) 458 udelay (10); 459 460 PRINTK2 ("MMU ready\n"); 461 } 462 463 return length; 464 } 465 466 467 /* 468 * Open and Initialize the board 469 * 470 * Set up everything, reset the card, etc .. 471 * 472 */ 473 static int smc_open(bd_t *bd, struct eth_device *dev) 474 { 475 int i, err; /* used to set hw ethernet address */ 476 477 PRINTK2("%s:smc_open\n", dev->name); 478 479 /* reset the hardware */ 480 481 smc_reset(dev); 482 smc_enable(dev); 483 484 SMC_SELECT_BANK(dev, 1); 485 /* set smc_mac_addr, and sync it with u-boot globals */ 486 err = smc_get_ethaddr(bd, dev); 487 if (err < 0) 488 return -1; 489 #ifdef USE_32_BIT 490 for (i = 0; i < 6; i += 2) { 491 word address; 492 493 address = smc_mac_addr[i + 1] << 8; 494 address |= smc_mac_addr[i]; 495 SMC_outw(dev, address, LAN91C96_IA0 + i); 496 } 497 #else 498 for (i = 0; i < 6; i++) 499 SMC_outb(dev, smc_mac_addr[i], LAN91C96_IA0 + i); 500 #endif 501 return 0; 502 } 503 504 /*------------------------------------------------------------- 505 * 506 * smc_rcv - receive a packet from the card 507 * 508 * There is ( at least ) a packet waiting to be read from 509 * chip-memory. 510 * 511 * o Read the status 512 * o If an error, record it 513 * o otherwise, read in the packet 514 *------------------------------------------------------------- 515 */ 516 static int smc_rcv(struct eth_device *dev) 517 { 518 int packet_number; 519 word status; 520 word packet_length; 521 int is_error = 0; 522 523 #ifdef USE_32_BIT 524 dword stat_len; 525 #endif 526 527 528 SMC_SELECT_BANK(dev, 2); 529 packet_number = SMC_inw(dev, LAN91C96_FIFO); 530 531 if (packet_number & LAN91C96_FIFO_RXEMPTY) { 532 return 0; 533 } 534 535 PRINTK3("%s:smc_rcv\n", dev->name); 536 /* start reading from the start of the packet */ 537 SMC_outw(dev, LAN91C96_PTR_READ | LAN91C96_PTR_RCV | 538 LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); 539 540 /* First two words are status and packet_length */ 541 #ifdef USE_32_BIT 542 stat_len = SMC_inl(dev, LAN91C96_DATA_HIGH); 543 status = stat_len & 0xffff; 544 packet_length = stat_len >> 16; 545 #else 546 status = SMC_inw(dev, LAN91C96_DATA_HIGH); 547 packet_length = SMC_inw(dev, LAN91C96_DATA_HIGH); 548 #endif 549 550 packet_length &= 0x07ff; /* mask off top bits */ 551 552 PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length); 553 554 if (!(status & FRAME_FILTER)) { 555 /* Adjust for having already read the first two words */ 556 packet_length -= 4; /*4; */ 557 558 559 /* set odd length for bug in LAN91C111, */ 560 /* which never sets RS_ODDFRAME */ 561 /* TODO ? */ 562 563 564 #ifdef USE_32_BIT 565 PRINTK3 (" Reading %d dwords (and %d bytes) \n", 566 packet_length >> 2, packet_length & 3); 567 /* QUESTION: Like in the TX routine, do I want 568 to send the DWORDs or the bytes first, or some 569 mixture. A mixture might improve already slow PIO 570 performance */ 571 SMC_insl(dev, LAN91C96_DATA_HIGH, net_rx_packets[0], 572 packet_length >> 2); 573 /* read the left over bytes */ 574 if (packet_length & 3) { 575 int i; 576 577 byte *tail = (byte *)(net_rx_packets[0] + 578 (packet_length & ~3)); 579 dword leftover = SMC_inl(dev, LAN91C96_DATA_HIGH); 580 581 for (i = 0; i < (packet_length & 3); i++) 582 *tail++ = (byte) (leftover >> (8 * i)) & 0xff; 583 } 584 #else 585 PRINTK3(" Reading %d words and %d byte(s)\n", 586 (packet_length >> 1), packet_length & 1); 587 SMC_insw(dev, LAN91C96_DATA_HIGH, net_rx_packets[0], 588 packet_length >> 1); 589 590 #endif /* USE_32_BIT */ 591 592 #if SMC_DEBUG > 2 593 printf ("Receiving Packet\n"); 594 print_packet((byte *)net_rx_packets[0], packet_length); 595 #endif 596 } else { 597 /* error ... */ 598 /* TODO ? */ 599 is_error = 1; 600 } 601 602 while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) 603 udelay (1); /* Wait until not busy */ 604 605 /* error or good, tell the card to get rid of this packet */ 606 SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU); 607 608 while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) 609 udelay (1); /* Wait until not busy */ 610 611 if (!is_error) { 612 /* Pass the packet up to the protocol layers. */ 613 net_process_received_packet(net_rx_packets[0], packet_length); 614 return packet_length; 615 } else { 616 return 0; 617 } 618 619 } 620 621 /*---------------------------------------------------- 622 * smc_close 623 * 624 * this makes the board clean up everything that it can 625 * and not talk to the outside world. Caused by 626 * an 'ifconfig ethX down' 627 * 628 -----------------------------------------------------*/ 629 static int smc_close(struct eth_device *dev) 630 { 631 PRINTK2("%s:smc_close\n", dev->name); 632 633 /* clear everything */ 634 smc_shutdown(dev); 635 636 return 0; 637 } 638 639 #if SMC_DEBUG > 2 640 static void print_packet(byte *buf, int length) 641 { 642 #if 0 643 int i; 644 int remainder; 645 int lines; 646 647 printf ("Packet of length %d \n", length); 648 649 lines = length / 16; 650 remainder = length % 16; 651 652 for (i = 0; i < lines; i++) { 653 int cur; 654 655 for (cur = 0; cur < 8; cur++) { 656 byte a, b; 657 658 a = *(buf++); 659 b = *(buf++); 660 printf ("%02x%02x ", a, b); 661 } 662 printf ("\n"); 663 } 664 for (i = 0; i < remainder / 2; i++) { 665 byte a, b; 666 667 a = *(buf++); 668 b = *(buf++); 669 printf ("%02x%02x ", a, b); 670 } 671 printf ("\n"); 672 #endif /* 0 */ 673 } 674 #endif /* SMC_DEBUG > 2 */ 675 676 static int lan91c96_init(struct eth_device *dev, bd_t *bd) 677 { 678 return smc_open(bd, dev); 679 } 680 681 static void lan91c96_halt(struct eth_device *dev) 682 { 683 smc_close(dev); 684 } 685 686 static int lan91c96_recv(struct eth_device *dev) 687 { 688 return smc_rcv(dev); 689 } 690 691 static int lan91c96_send(struct eth_device *dev, void *packet, 692 int length) 693 { 694 return smc_send_packet(dev, packet, length); 695 } 696 697 /* smc_get_ethaddr 698 * 699 * This checks both the environment and the ROM for an ethernet address. If 700 * found, the environment takes precedence. 701 */ 702 703 static int smc_get_ethaddr(bd_t *bd, struct eth_device *dev) 704 { 705 uchar v_mac[6]; 706 707 if (!eth_env_get_enetaddr("ethaddr", v_mac)) { 708 /* get ROM mac value if any */ 709 if (!get_rom_mac(dev, v_mac)) { 710 printf("\n*** ERROR: ethaddr is NOT set !!\n"); 711 return -1; 712 } 713 eth_env_set_enetaddr("ethaddr", v_mac); 714 } 715 716 smc_set_mac_addr(v_mac); /* use old function to update smc default */ 717 PRINTK("Using MAC Address %pM\n", v_mac); 718 return 0; 719 } 720 721 /* 722 * get_rom_mac() 723 * Note, this has omly been tested for the OMAP730 P2. 724 */ 725 726 static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac) 727 { 728 int i; 729 SMC_SELECT_BANK(dev, 1); 730 for (i=0; i<6; i++) 731 { 732 v_rom_mac[i] = SMC_inb(dev, LAN91C96_IA0 + i); 733 } 734 return (1); 735 } 736 737 /* Structure to detect the device IDs */ 738 struct id_type { 739 u8 id; 740 char *name; 741 }; 742 static struct id_type supported_chips[] = { 743 {0, ""}, /* Dummy entry to prevent id check failure */ 744 {9, "LAN91C110"}, 745 {8, "LAN91C100FD"}, 746 {7, "LAN91C100"}, 747 {5, "LAN91C95"}, 748 {4, "LAN91C94/96"}, 749 {3, "LAN91C90/92"}, 750 }; 751 /* lan91c96_detect_chip 752 * See: 753 * http://www.embeddedsys.com/subpages/resources/images/documents/LAN91C96_datasheet.pdf 754 * page 71 - that is the closest we get to detect this device 755 */ 756 static int lan91c96_detect_chip(struct eth_device *dev) 757 { 758 u8 chip_id; 759 int r; 760 SMC_SELECT_BANK(dev, 3); 761 chip_id = (SMC_inw(dev, 0xA) & LAN91C96_REV_CHIPID) >> 4; 762 SMC_SELECT_BANK(dev, 0); 763 for (r = 0; r < ARRAY_SIZE(supported_chips); r++) 764 if (chip_id == supported_chips[r].id) 765 return r; 766 return 0; 767 } 768 769 int lan91c96_initialize(u8 dev_num, int base_addr) 770 { 771 struct eth_device *dev; 772 int r = 0; 773 774 dev = malloc(sizeof(*dev)); 775 if (!dev) { 776 return 0; 777 } 778 memset(dev, 0, sizeof(*dev)); 779 780 dev->iobase = base_addr; 781 782 /* Try to detect chip. Will fail if not present. */ 783 r = lan91c96_detect_chip(dev); 784 if (!r) { 785 free(dev); 786 return 0; 787 } 788 get_rom_mac(dev, dev->enetaddr); 789 790 dev->init = lan91c96_init; 791 dev->halt = lan91c96_halt; 792 dev->send = lan91c96_send; 793 dev->recv = lan91c96_recv; 794 sprintf(dev->name, "%s-%hu", supported_chips[r].name, dev_num); 795 796 eth_register(dev); 797 return 0; 798 } 799