xref: /openbmc/u-boot/drivers/net/fsl_mcdmafec.c (revision ae485b54)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2000-2004
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  *
6  * (C) Copyright 2007 Freescale Semiconductor, Inc.
7  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
8  */
9 
10 #include <common.h>
11 #include <environment.h>
12 #include <malloc.h>
13 #include <command.h>
14 #include <config.h>
15 #include <net.h>
16 #include <miiphy.h>
17 
18 #undef	ET_DEBUG
19 #undef	MII_DEBUG
20 
21 /* Ethernet Transmit and Receive Buffers */
22 #define DBUF_LENGTH		1520
23 #define PKT_MAXBUF_SIZE		1518
24 #define PKT_MINBUF_SIZE		64
25 #define PKT_MAXBLR_SIZE		1536
26 #define LAST_PKTBUFSRX		PKTBUFSRX - 1
27 #define BD_ENET_RX_W_E		(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
28 #define BD_ENET_TX_RDY_LST	(BD_ENET_TX_READY | BD_ENET_TX_LAST)
29 #define FIFO_ERRSTAT		(FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
30 
31 /* RxBD bits definitions */
32 #define BD_ENET_RX_ERR	(BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
33 			 BD_ENET_RX_OV | BD_ENET_RX_TR)
34 
35 #include <asm/immap.h>
36 #include <asm/fsl_mcdmafec.h>
37 
38 #include "MCD_dma.h"
39 
40 struct fec_info_dma fec_info[] = {
41 #ifdef CONFIG_SYS_FEC0_IOBASE
42 	{
43 	 0,			/* index */
44 	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
45 	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
46 	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
47 	 -1,			/* phy_addr */
48 	 0,			/* duplex and speed */
49 	 0,			/* phy name */
50 	 0,			/* phyname init */
51 	 0,			/* RX BD */
52 	 0,			/* TX BD */
53 	 0,			/* rx Index */
54 	 0,			/* tx Index */
55 	 0,			/* tx buffer */
56 	 0,			/* initialized flag */
57 	 (struct fec_info_dma *)-1,	/* next */
58 	 FEC0_RX_TASK,		/* rxTask */
59 	 FEC0_TX_TASK,		/* txTask */
60 	 FEC0_RX_PRIORITY,	/* rxPri */
61 	 FEC0_TX_PRIORITY,	/* txPri */
62 	 FEC0_RX_INIT,		/* rxInit */
63 	 FEC0_TX_INIT,		/* txInit */
64 	 0,			/* usedTbdIndex */
65 	 0,			/* cleanTbdNum */
66 	 },
67 #endif
68 #ifdef CONFIG_SYS_FEC1_IOBASE
69 	{
70 	 1,			/* index */
71 	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
72 	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
73 	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
74 	 -1,			/* phy_addr */
75 	 0,			/* duplex and speed */
76 	 0,			/* phy name */
77 	 0,			/* phy name init */
78 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
79 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
80 #else
81 	 0,			/* RX BD */
82 #endif
83 	 0,			/* TX BD */
84 	 0,			/* rx Index */
85 	 0,			/* tx Index */
86 	 0,			/* tx buffer */
87 	 0,			/* initialized flag */
88 	 (struct fec_info_dma *)-1,	/* next */
89 	 FEC1_RX_TASK,		/* rxTask */
90 	 FEC1_TX_TASK,		/* txTask */
91 	 FEC1_RX_PRIORITY,	/* rxPri */
92 	 FEC1_TX_PRIORITY,	/* txPri */
93 	 FEC1_RX_INIT,		/* rxInit */
94 	 FEC1_TX_INIT,		/* txInit */
95 	 0,			/* usedTbdIndex */
96 	 0,			/* cleanTbdNum */
97 	 }
98 #endif
99 };
100 
101 static int fec_send(struct eth_device *dev, void *packet, int length);
102 static int fec_recv(struct eth_device *dev);
103 static int fec_init(struct eth_device *dev, bd_t * bd);
104 static void fec_halt(struct eth_device *dev);
105 
106 #ifdef ET_DEBUG
107 static void dbg_fec_regs(struct eth_device *dev)
108 {
109 	struct fec_info_dma *info = dev->priv;
110 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
111 
112 	printf("=====\n");
113 	printf("ievent       %x - %x\n", (int)&fecp->eir, fecp->eir);
114 	printf("imask        %x - %x\n", (int)&fecp->eimr, fecp->eimr);
115 	printf("ecntrl       %x - %x\n", (int)&fecp->ecr, fecp->ecr);
116 	printf("mii_mframe   %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
117 	printf("mii_speed    %x - %x\n", (int)&fecp->mscr, fecp->mscr);
118 	printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
119 	printf("r_cntrl      %x - %x\n", (int)&fecp->rcr, fecp->rcr);
120 	printf("r hash       %x - %x\n", (int)&fecp->rhr, fecp->rhr);
121 	printf("x_cntrl      %x - %x\n", (int)&fecp->tcr, fecp->tcr);
122 	printf("padr_l       %x - %x\n", (int)&fecp->palr, fecp->palr);
123 	printf("padr_u       %x - %x\n", (int)&fecp->paur, fecp->paur);
124 	printf("op_pause     %x - %x\n", (int)&fecp->opd, fecp->opd);
125 	printf("iadr_u       %x - %x\n", (int)&fecp->iaur, fecp->iaur);
126 	printf("iadr_l       %x - %x\n", (int)&fecp->ialr, fecp->ialr);
127 	printf("gadr_u       %x - %x\n", (int)&fecp->gaur, fecp->gaur);
128 	printf("gadr_l       %x - %x\n", (int)&fecp->galr, fecp->galr);
129 	printf("x_wmrk       %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
130 	printf("r_fdata      %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
131 	printf("r_fstat      %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
132 	printf("r_fctrl      %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
133 	printf("r_flrfp      %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
134 	printf("r_flwfp      %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
135 	printf("r_frfar      %x - %x\n", (int)&fecp->rfar, fecp->rfar);
136 	printf("r_frfrp      %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
137 	printf("r_frfwp      %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
138 	printf("t_fdata      %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
139 	printf("t_fstat      %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
140 	printf("t_fctrl      %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
141 	printf("t_flrfp      %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
142 	printf("t_flwfp      %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
143 	printf("t_ftfar      %x - %x\n", (int)&fecp->tfar, fecp->tfar);
144 	printf("t_ftfrp      %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
145 	printf("t_ftfwp      %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
146 	printf("frst         %x - %x\n", (int)&fecp->frst, fecp->frst);
147 	printf("ctcwr        %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
148 }
149 #endif
150 
151 static void set_fec_duplex_speed(volatile fecdma_t * fecp, bd_t * bd,
152 				 int dup_spd)
153 {
154 	if ((dup_spd >> 16) == FULL) {
155 		/* Set maximum frame length */
156 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
157 		    FEC_RCR_PROM | 0x100;
158 		fecp->tcr = FEC_TCR_FDEN;
159 	} else {
160 		/* Half duplex mode */
161 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
162 		    FEC_RCR_MII_MODE | FEC_RCR_DRT;
163 		fecp->tcr &= ~FEC_TCR_FDEN;
164 	}
165 
166 	if ((dup_spd & 0xFFFF) == _100BASET) {
167 #ifdef MII_DEBUG
168 		printf("100Mbps\n");
169 #endif
170 		bd->bi_ethspeed = 100;
171 	} else {
172 #ifdef MII_DEBUG
173 		printf("10Mbps\n");
174 #endif
175 		bd->bi_ethspeed = 10;
176 	}
177 }
178 
179 static int fec_send(struct eth_device *dev, void *packet, int length)
180 {
181 	struct fec_info_dma *info = dev->priv;
182 	cbd_t *pTbd, *pUsedTbd;
183 	u16 phyStatus;
184 
185 	miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
186 
187 	/* process all the consumed TBDs */
188 	while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
189 		pUsedTbd = &info->txbd[info->usedTbdIdx];
190 		if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
191 #ifdef ET_DEBUG
192 			printf("Cannot clean TBD %d, in use\n",
193 			       info->cleanTbdNum);
194 #endif
195 			return 0;
196 		}
197 
198 		/* clean this buffer descriptor */
199 		if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
200 			pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
201 		else
202 			pUsedTbd->cbd_sc = 0;
203 
204 		/* update some indeces for a correct handling of the TBD ring */
205 		info->cleanTbdNum++;
206 		info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
207 	}
208 
209 	/* Check for valid length of data. */
210 	if ((length > 1500) || (length <= 0)) {
211 		return -1;
212 	}
213 
214 	/* Check the number of vacant TxBDs. */
215 	if (info->cleanTbdNum < 1) {
216 		printf("No available TxBDs ...\n");
217 		return -1;
218 	}
219 
220 	/* Get the first TxBD to send the mac header */
221 	pTbd = &info->txbd[info->txIdx];
222 	pTbd->cbd_datlen = length;
223 	pTbd->cbd_bufaddr = (u32) packet;
224 	pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
225 	info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
226 
227 	/* Enable DMA transmit task */
228 	MCD_continDma(info->txTask);
229 
230 	info->cleanTbdNum -= 1;
231 
232 	/* wait until frame is sent . */
233 	while (pTbd->cbd_sc & BD_ENET_TX_READY) {
234 		udelay(10);
235 	}
236 
237 	return (int)(info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
238 }
239 
240 static int fec_recv(struct eth_device *dev)
241 {
242 	struct fec_info_dma *info = dev->priv;
243 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
244 
245 	cbd_t *prbd = &info->rxbd[info->rxIdx];
246 	u32 ievent;
247 	int frame_length, len = 0;
248 
249 	/* Check if any critical events have happened */
250 	ievent = fecp->eir;
251 	if (ievent != 0) {
252 		fecp->eir = ievent;
253 
254 		if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
255 			printf("fec_recv: error\n");
256 			fec_halt(dev);
257 			fec_init(dev, NULL);
258 			return 0;
259 		}
260 
261 		if (ievent & FEC_EIR_HBERR) {
262 			/* Heartbeat error */
263 			fecp->tcr |= FEC_TCR_GTS;
264 		}
265 
266 		if (ievent & FEC_EIR_GRA) {
267 			/* Graceful stop complete */
268 			if (fecp->tcr & FEC_TCR_GTS) {
269 				printf("fec_recv: tcr_gts\n");
270 				fec_halt(dev);
271 				fecp->tcr &= ~FEC_TCR_GTS;
272 				fec_init(dev, NULL);
273 			}
274 		}
275 	}
276 
277 	if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) {
278 		if ((prbd->cbd_sc & BD_ENET_RX_LAST) &&
279 		    !(prbd->cbd_sc & BD_ENET_RX_ERR) &&
280 		    ((prbd->cbd_datlen - 4) > 14)) {
281 
282 			/* Get buffer address and size */
283 			frame_length = prbd->cbd_datlen - 4;
284 
285 			/* Fill the buffer and pass it to upper layers */
286 			net_process_received_packet((uchar *)prbd->cbd_bufaddr,
287 						    frame_length);
288 			len = frame_length;
289 		}
290 
291 		/* Reset buffer descriptor as empty */
292 		if ((info->rxIdx) == (PKTBUFSRX - 1))
293 			prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
294 		else
295 			prbd->cbd_sc = BD_ENET_RX_EMPTY;
296 
297 		prbd->cbd_datlen = PKTSIZE_ALIGN;
298 
299 		/* Now, we have an empty RxBD, restart the DMA receive task */
300 		MCD_continDma(info->rxTask);
301 
302 		/* Increment BD count */
303 		info->rxIdx = (info->rxIdx + 1) % PKTBUFSRX;
304 	}
305 
306 	return len;
307 }
308 
309 static void fec_set_hwaddr(volatile fecdma_t * fecp, u8 * mac)
310 {
311 	u8 currByte;		/* byte for which to compute the CRC */
312 	int byte;		/* loop - counter */
313 	int bit;		/* loop - counter */
314 	u32 crc = 0xffffffff;	/* initial value */
315 
316 	for (byte = 0; byte < 6; byte++) {
317 		currByte = mac[byte];
318 		for (bit = 0; bit < 8; bit++) {
319 			if ((currByte & 0x01) ^ (crc & 0x01)) {
320 				crc >>= 1;
321 				crc = crc ^ 0xedb88320;
322 			} else {
323 				crc >>= 1;
324 			}
325 			currByte >>= 1;
326 		}
327 	}
328 
329 	crc = crc >> 26;
330 
331 	/* Set individual hash table register */
332 	if (crc >= 32) {
333 		fecp->ialr = (1 << (crc - 32));
334 		fecp->iaur = 0;
335 	} else {
336 		fecp->ialr = 0;
337 		fecp->iaur = (1 << crc);
338 	}
339 
340 	/* Set physical address */
341 	fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
342 	fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
343 
344 	/* Clear multicast address hash table */
345 	fecp->gaur = 0;
346 	fecp->galr = 0;
347 }
348 
349 static int fec_init(struct eth_device *dev, bd_t * bd)
350 {
351 	struct fec_info_dma *info = dev->priv;
352 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
353 	int i;
354 	uchar enetaddr[6];
355 
356 #ifdef ET_DEBUG
357 	printf("fec_init: iobase 0x%08x ...\n", info->iobase);
358 #endif
359 
360 	fecpin_setclear(dev, 1);
361 
362 	fec_halt(dev);
363 
364 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
365 	defined (CONFIG_SYS_DISCOVER_PHY)
366 
367 	mii_init();
368 
369 	set_fec_duplex_speed(fecp, bd, info->dup_spd);
370 #else
371 #ifndef CONFIG_SYS_DISCOVER_PHY
372 	set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
373 #endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
374 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
375 
376 	/* We use strictly polling mode only */
377 	fecp->eimr = 0;
378 
379 	/* Clear any pending interrupt */
380 	fecp->eir = 0xffffffff;
381 
382 	/* Set station address   */
383 	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE)
384 		eth_env_get_enetaddr("ethaddr", enetaddr);
385 	else
386 		eth_env_get_enetaddr("eth1addr", enetaddr);
387 	fec_set_hwaddr(fecp, enetaddr);
388 
389 	/* Set Opcode/Pause Duration Register */
390 	fecp->opd = 0x00010020;
391 
392 	/* Setup Buffers and Buffer Descriptors */
393 	info->rxIdx = 0;
394 	info->txIdx = 0;
395 
396 	/* Setup Receiver Buffer Descriptors (13.14.24.18)
397 	 * Settings:     Empty, Wrap */
398 	for (i = 0; i < PKTBUFSRX; i++) {
399 		info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
400 		info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
401 		info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
402 	}
403 	info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
404 
405 	/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
406 	 * Settings:    Last, Tx CRC */
407 	for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
408 		info->txbd[i].cbd_sc = 0;
409 		info->txbd[i].cbd_datlen = 0;
410 		info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
411 	}
412 	info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
413 
414 	info->usedTbdIdx = 0;
415 	info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
416 
417 	/* Set Rx FIFO alarm and granularity value */
418 	fecp->rfcr = 0x0c000000;
419 	fecp->rfar = 0x0000030c;
420 
421 	/* Set Tx FIFO granularity value */
422 	fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
423 	fecp->tfar = 0x00000080;
424 
425 	fecp->tfwr = 0x2;
426 	fecp->ctcwr = 0x03000000;
427 
428 	/* Enable DMA receive task */
429 	MCD_startDma(info->rxTask,	/* Dma channel */
430 		     (s8 *) info->rxbd,	/*Source Address */
431 		     0,		/* Source increment */
432 		     (s8 *) (&fecp->rfdr),	/* dest */
433 		     4,		/* dest increment */
434 		     0,		/* DMA size */
435 		     4,		/* xfer size */
436 		     info->rxInit,	/* initiator */
437 		     info->rxPri,	/* priority */
438 		     (MCD_FECRX_DMA | MCD_TT_FLAGS_DEF),	/* Flags */
439 		     (MCD_NO_CSUM | MCD_NO_BYTE_SWAP)	/* Function description */
440 	    );
441 
442 	/* Enable DMA tx task with no ready buffer descriptors */
443 	MCD_startDma(info->txTask,	/* Dma channel */
444 		     (s8 *) info->txbd,	/*Source Address */
445 		     0,		/* Source increment */
446 		     (s8 *) (&fecp->tfdr),	/* dest */
447 		     4,		/* dest incr */
448 		     0,		/* DMA size */
449 		     4,		/* xfer size */
450 		     info->txInit,	/* initiator */
451 		     info->txPri,	/* priority */
452 		     (MCD_FECTX_DMA | MCD_TT_FLAGS_DEF),	/* Flags */
453 		     (MCD_NO_CSUM | MCD_NO_BYTE_SWAP)	/* Function description */
454 	    );
455 
456 	/* Now enable the transmit and receive processing */
457 	fecp->ecr |= FEC_ECR_ETHER_EN;
458 
459 	return 1;
460 }
461 
462 static void fec_halt(struct eth_device *dev)
463 {
464 	struct fec_info_dma *info = dev->priv;
465 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
466 	int counter = 0xffff;
467 
468 	/* issue graceful stop command to the FEC transmitter if necessary */
469 	fecp->tcr |= FEC_TCR_GTS;
470 
471 	/* wait for graceful stop to register */
472 	while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) ;
473 
474 	/* Disable DMA tasks */
475 	MCD_killDma(info->txTask);
476 	MCD_killDma(info->rxTask);
477 
478 	/* Disable the Ethernet Controller */
479 	fecp->ecr &= ~FEC_ECR_ETHER_EN;
480 
481 	/* Clear FIFO status registers */
482 	fecp->rfsr &= FIFO_ERRSTAT;
483 	fecp->tfsr &= FIFO_ERRSTAT;
484 
485 	fecp->frst = 0x01000000;
486 
487 	/* Issue a reset command to the FEC chip */
488 	fecp->ecr |= FEC_ECR_RESET;
489 
490 	/* wait at least 20 clock cycles */
491 	udelay(10000);
492 
493 #ifdef ET_DEBUG
494 	printf("Ethernet task stopped\n");
495 #endif
496 }
497 
498 int mcdmafec_initialize(bd_t * bis)
499 {
500 	struct eth_device *dev;
501 	int i;
502 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
503 	u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
504 #endif
505 
506 	for (i = 0; i < ARRAY_SIZE(fec_info); i++) {
507 
508 		dev =
509 		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
510 						  sizeof *dev);
511 		if (dev == NULL)
512 			hang();
513 
514 		memset(dev, 0, sizeof(*dev));
515 
516 		sprintf(dev->name, "FEC%d", fec_info[i].index);
517 
518 		dev->priv = &fec_info[i];
519 		dev->init = fec_init;
520 		dev->halt = fec_halt;
521 		dev->send = fec_send;
522 		dev->recv = fec_recv;
523 
524 		/* setup Receive and Transmit buffer descriptor */
525 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
526 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
527 		tmp = (u32)fec_info[i].rxbd;
528 		fec_info[i].txbd =
529 		    (cbd_t *)((u32)fec_info[i].txbd + tmp +
530 		    (PKTBUFSRX * sizeof(cbd_t)));
531 		tmp = (u32)fec_info[i].txbd;
532 		fec_info[i].txbuf =
533 		    (char *)((u32)fec_info[i].txbuf + tmp +
534 		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
535 		tmp = (u32)fec_info[i].txbuf;
536 #else
537 		fec_info[i].rxbd =
538 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
539 				       (PKTBUFSRX * sizeof(cbd_t)));
540 		fec_info[i].txbd =
541 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
542 				       (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
543 		fec_info[i].txbuf =
544 		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
545 #endif
546 
547 #ifdef ET_DEBUG
548 		printf("rxbd %x txbd %x\n",
549 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
550 #endif
551 
552 		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
553 
554 		eth_register(dev);
555 
556 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
557 		int retval;
558 		struct mii_dev *mdiodev = mdio_alloc();
559 		if (!mdiodev)
560 			return -ENOMEM;
561 		strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
562 		mdiodev->read = mcffec_miiphy_read;
563 		mdiodev->write = mcffec_miiphy_write;
564 
565 		retval = mdio_register(mdiodev);
566 		if (retval < 0)
567 			return retval;
568 #endif
569 
570 		if (i > 0)
571 			fec_info[i - 1].next = &fec_info[i];
572 	}
573 	fec_info[i - 1].next = &fec_info[0];
574 
575 	/* default speed */
576 	bis->bi_ethspeed = 10;
577 
578 	return 0;
579 }
580