xref: /openbmc/u-boot/drivers/net/fsl_mcdmafec.c (revision a818704b)
1 /*
2  * (C) Copyright 2000-2004
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * (C) Copyright 2007 Freescale Semiconductor, Inc.
6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <malloc.h>
13 #include <command.h>
14 #include <config.h>
15 #include <net.h>
16 #include <miiphy.h>
17 
18 #undef	ET_DEBUG
19 #undef	MII_DEBUG
20 
21 /* Ethernet Transmit and Receive Buffers */
22 #define DBUF_LENGTH		1520
23 #define PKT_MAXBUF_SIZE		1518
24 #define PKT_MINBUF_SIZE		64
25 #define PKT_MAXBLR_SIZE		1536
26 #define LAST_PKTBUFSRX		PKTBUFSRX - 1
27 #define BD_ENET_RX_W_E		(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
28 #define BD_ENET_TX_RDY_LST	(BD_ENET_TX_READY | BD_ENET_TX_LAST)
29 #define FIFO_ERRSTAT		(FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
30 
31 /* RxBD bits definitions */
32 #define BD_ENET_RX_ERR	(BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
33 			 BD_ENET_RX_OV | BD_ENET_RX_TR)
34 
35 #include <asm/immap.h>
36 #include <asm/fsl_mcdmafec.h>
37 
38 #include "MCD_dma.h"
39 
40 DECLARE_GLOBAL_DATA_PTR;
41 
42 struct fec_info_dma fec_info[] = {
43 #ifdef CONFIG_SYS_FEC0_IOBASE
44 	{
45 	 0,			/* index */
46 	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
47 	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
48 	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
49 	 -1,			/* phy_addr */
50 	 0,			/* duplex and speed */
51 	 0,			/* phy name */
52 	 0,			/* phyname init */
53 	 0,			/* RX BD */
54 	 0,			/* TX BD */
55 	 0,			/* rx Index */
56 	 0,			/* tx Index */
57 	 0,			/* tx buffer */
58 	 0,			/* initialized flag */
59 	 (struct fec_info_dma *)-1,	/* next */
60 	 FEC0_RX_TASK,		/* rxTask */
61 	 FEC0_TX_TASK,		/* txTask */
62 	 FEC0_RX_PRIORITY,	/* rxPri */
63 	 FEC0_TX_PRIORITY,	/* txPri */
64 	 FEC0_RX_INIT,		/* rxInit */
65 	 FEC0_TX_INIT,		/* txInit */
66 	 0,			/* usedTbdIndex */
67 	 0,			/* cleanTbdNum */
68 	 },
69 #endif
70 #ifdef CONFIG_SYS_FEC1_IOBASE
71 	{
72 	 1,			/* index */
73 	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
74 	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
75 	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
76 	 -1,			/* phy_addr */
77 	 0,			/* duplex and speed */
78 	 0,			/* phy name */
79 	 0,			/* phy name init */
80 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
81 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
82 #else
83 	 0,			/* RX BD */
84 #endif
85 	 0,			/* TX BD */
86 	 0,			/* rx Index */
87 	 0,			/* tx Index */
88 	 0,			/* tx buffer */
89 	 0,			/* initialized flag */
90 	 (struct fec_info_dma *)-1,	/* next */
91 	 FEC1_RX_TASK,		/* rxTask */
92 	 FEC1_TX_TASK,		/* txTask */
93 	 FEC1_RX_PRIORITY,	/* rxPri */
94 	 FEC1_TX_PRIORITY,	/* txPri */
95 	 FEC1_RX_INIT,		/* rxInit */
96 	 FEC1_TX_INIT,		/* txInit */
97 	 0,			/* usedTbdIndex */
98 	 0,			/* cleanTbdNum */
99 	 }
100 #endif
101 };
102 
103 static int fec_send(struct eth_device *dev, void *packet, int length);
104 static int fec_recv(struct eth_device *dev);
105 static int fec_init(struct eth_device *dev, bd_t * bd);
106 static void fec_halt(struct eth_device *dev);
107 
108 #ifdef ET_DEBUG
109 static void dbg_fec_regs(struct eth_device *dev)
110 {
111 	struct fec_info_dma *info = dev->priv;
112 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
113 
114 	printf("=====\n");
115 	printf("ievent       %x - %x\n", (int)&fecp->eir, fecp->eir);
116 	printf("imask        %x - %x\n", (int)&fecp->eimr, fecp->eimr);
117 	printf("ecntrl       %x - %x\n", (int)&fecp->ecr, fecp->ecr);
118 	printf("mii_mframe   %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
119 	printf("mii_speed    %x - %x\n", (int)&fecp->mscr, fecp->mscr);
120 	printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
121 	printf("r_cntrl      %x - %x\n", (int)&fecp->rcr, fecp->rcr);
122 	printf("r hash       %x - %x\n", (int)&fecp->rhr, fecp->rhr);
123 	printf("x_cntrl      %x - %x\n", (int)&fecp->tcr, fecp->tcr);
124 	printf("padr_l       %x - %x\n", (int)&fecp->palr, fecp->palr);
125 	printf("padr_u       %x - %x\n", (int)&fecp->paur, fecp->paur);
126 	printf("op_pause     %x - %x\n", (int)&fecp->opd, fecp->opd);
127 	printf("iadr_u       %x - %x\n", (int)&fecp->iaur, fecp->iaur);
128 	printf("iadr_l       %x - %x\n", (int)&fecp->ialr, fecp->ialr);
129 	printf("gadr_u       %x - %x\n", (int)&fecp->gaur, fecp->gaur);
130 	printf("gadr_l       %x - %x\n", (int)&fecp->galr, fecp->galr);
131 	printf("x_wmrk       %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
132 	printf("r_fdata      %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
133 	printf("r_fstat      %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
134 	printf("r_fctrl      %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
135 	printf("r_flrfp      %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
136 	printf("r_flwfp      %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
137 	printf("r_frfar      %x - %x\n", (int)&fecp->rfar, fecp->rfar);
138 	printf("r_frfrp      %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
139 	printf("r_frfwp      %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
140 	printf("t_fdata      %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
141 	printf("t_fstat      %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
142 	printf("t_fctrl      %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
143 	printf("t_flrfp      %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
144 	printf("t_flwfp      %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
145 	printf("t_ftfar      %x - %x\n", (int)&fecp->tfar, fecp->tfar);
146 	printf("t_ftfrp      %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
147 	printf("t_ftfwp      %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
148 	printf("frst         %x - %x\n", (int)&fecp->frst, fecp->frst);
149 	printf("ctcwr        %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
150 }
151 #endif
152 
153 static void set_fec_duplex_speed(volatile fecdma_t * fecp, bd_t * bd,
154 				 int dup_spd)
155 {
156 	if ((dup_spd >> 16) == FULL) {
157 		/* Set maximum frame length */
158 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
159 		    FEC_RCR_PROM | 0x100;
160 		fecp->tcr = FEC_TCR_FDEN;
161 	} else {
162 		/* Half duplex mode */
163 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
164 		    FEC_RCR_MII_MODE | FEC_RCR_DRT;
165 		fecp->tcr &= ~FEC_TCR_FDEN;
166 	}
167 
168 	if ((dup_spd & 0xFFFF) == _100BASET) {
169 #ifdef MII_DEBUG
170 		printf("100Mbps\n");
171 #endif
172 		bd->bi_ethspeed = 100;
173 	} else {
174 #ifdef MII_DEBUG
175 		printf("10Mbps\n");
176 #endif
177 		bd->bi_ethspeed = 10;
178 	}
179 }
180 
181 static int fec_send(struct eth_device *dev, void *packet, int length)
182 {
183 	struct fec_info_dma *info = dev->priv;
184 	cbd_t *pTbd, *pUsedTbd;
185 	u16 phyStatus;
186 
187 	miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
188 
189 	/* process all the consumed TBDs */
190 	while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
191 		pUsedTbd = &info->txbd[info->usedTbdIdx];
192 		if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
193 #ifdef ET_DEBUG
194 			printf("Cannot clean TBD %d, in use\n",
195 			       info->cleanTbdNum);
196 #endif
197 			return 0;
198 		}
199 
200 		/* clean this buffer descriptor */
201 		if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
202 			pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
203 		else
204 			pUsedTbd->cbd_sc = 0;
205 
206 		/* update some indeces for a correct handling of the TBD ring */
207 		info->cleanTbdNum++;
208 		info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
209 	}
210 
211 	/* Check for valid length of data. */
212 	if ((length > 1500) || (length <= 0)) {
213 		return -1;
214 	}
215 
216 	/* Check the number of vacant TxBDs. */
217 	if (info->cleanTbdNum < 1) {
218 		printf("No available TxBDs ...\n");
219 		return -1;
220 	}
221 
222 	/* Get the first TxBD to send the mac header */
223 	pTbd = &info->txbd[info->txIdx];
224 	pTbd->cbd_datlen = length;
225 	pTbd->cbd_bufaddr = (u32) packet;
226 	pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
227 	info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
228 
229 	/* Enable DMA transmit task */
230 	MCD_continDma(info->txTask);
231 
232 	info->cleanTbdNum -= 1;
233 
234 	/* wait until frame is sent . */
235 	while (pTbd->cbd_sc & BD_ENET_TX_READY) {
236 		udelay(10);
237 	}
238 
239 	return (int)(info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
240 }
241 
242 static int fec_recv(struct eth_device *dev)
243 {
244 	struct fec_info_dma *info = dev->priv;
245 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
246 
247 	cbd_t *prbd = &info->rxbd[info->rxIdx];
248 	u32 ievent;
249 	int frame_length, len = 0;
250 
251 	/* Check if any critical events have happened */
252 	ievent = fecp->eir;
253 	if (ievent != 0) {
254 		fecp->eir = ievent;
255 
256 		if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
257 			printf("fec_recv: error\n");
258 			fec_halt(dev);
259 			fec_init(dev, NULL);
260 			return 0;
261 		}
262 
263 		if (ievent & FEC_EIR_HBERR) {
264 			/* Heartbeat error */
265 			fecp->tcr |= FEC_TCR_GTS;
266 		}
267 
268 		if (ievent & FEC_EIR_GRA) {
269 			/* Graceful stop complete */
270 			if (fecp->tcr & FEC_TCR_GTS) {
271 				printf("fec_recv: tcr_gts\n");
272 				fec_halt(dev);
273 				fecp->tcr &= ~FEC_TCR_GTS;
274 				fec_init(dev, NULL);
275 			}
276 		}
277 	}
278 
279 	if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) {
280 		if ((prbd->cbd_sc & BD_ENET_RX_LAST) &&
281 		    !(prbd->cbd_sc & BD_ENET_RX_ERR) &&
282 		    ((prbd->cbd_datlen - 4) > 14)) {
283 
284 			/* Get buffer address and size */
285 			frame_length = prbd->cbd_datlen - 4;
286 
287 			/* Fill the buffer and pass it to upper layers */
288 			net_process_received_packet((uchar *)prbd->cbd_bufaddr,
289 						    frame_length);
290 			len = frame_length;
291 		}
292 
293 		/* Reset buffer descriptor as empty */
294 		if ((info->rxIdx) == (PKTBUFSRX - 1))
295 			prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
296 		else
297 			prbd->cbd_sc = BD_ENET_RX_EMPTY;
298 
299 		prbd->cbd_datlen = PKTSIZE_ALIGN;
300 
301 		/* Now, we have an empty RxBD, restart the DMA receive task */
302 		MCD_continDma(info->rxTask);
303 
304 		/* Increment BD count */
305 		info->rxIdx = (info->rxIdx + 1) % PKTBUFSRX;
306 	}
307 
308 	return len;
309 }
310 
311 static void fec_set_hwaddr(volatile fecdma_t * fecp, u8 * mac)
312 {
313 	u8 currByte;		/* byte for which to compute the CRC */
314 	int byte;		/* loop - counter */
315 	int bit;		/* loop - counter */
316 	u32 crc = 0xffffffff;	/* initial value */
317 
318 	for (byte = 0; byte < 6; byte++) {
319 		currByte = mac[byte];
320 		for (bit = 0; bit < 8; bit++) {
321 			if ((currByte & 0x01) ^ (crc & 0x01)) {
322 				crc >>= 1;
323 				crc = crc ^ 0xedb88320;
324 			} else {
325 				crc >>= 1;
326 			}
327 			currByte >>= 1;
328 		}
329 	}
330 
331 	crc = crc >> 26;
332 
333 	/* Set individual hash table register */
334 	if (crc >= 32) {
335 		fecp->ialr = (1 << (crc - 32));
336 		fecp->iaur = 0;
337 	} else {
338 		fecp->ialr = 0;
339 		fecp->iaur = (1 << crc);
340 	}
341 
342 	/* Set physical address */
343 	fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
344 	fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
345 
346 	/* Clear multicast address hash table */
347 	fecp->gaur = 0;
348 	fecp->galr = 0;
349 }
350 
351 static int fec_init(struct eth_device *dev, bd_t * bd)
352 {
353 	struct fec_info_dma *info = dev->priv;
354 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
355 	int i;
356 	uchar enetaddr[6];
357 
358 #ifdef ET_DEBUG
359 	printf("fec_init: iobase 0x%08x ...\n", info->iobase);
360 #endif
361 
362 	fecpin_setclear(dev, 1);
363 
364 	fec_halt(dev);
365 
366 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
367 	defined (CONFIG_SYS_DISCOVER_PHY)
368 
369 	mii_init();
370 
371 	set_fec_duplex_speed(fecp, bd, info->dup_spd);
372 #else
373 #ifndef CONFIG_SYS_DISCOVER_PHY
374 	set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
375 #endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
376 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
377 
378 	/* We use strictly polling mode only */
379 	fecp->eimr = 0;
380 
381 	/* Clear any pending interrupt */
382 	fecp->eir = 0xffffffff;
383 
384 	/* Set station address   */
385 	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE)
386 		eth_getenv_enetaddr("ethaddr", enetaddr);
387 	else
388 		eth_getenv_enetaddr("eth1addr", enetaddr);
389 	fec_set_hwaddr(fecp, enetaddr);
390 
391 	/* Set Opcode/Pause Duration Register */
392 	fecp->opd = 0x00010020;
393 
394 	/* Setup Buffers and Buffer Desriptors */
395 	info->rxIdx = 0;
396 	info->txIdx = 0;
397 
398 	/* Setup Receiver Buffer Descriptors (13.14.24.18)
399 	 * Settings:     Empty, Wrap */
400 	for (i = 0; i < PKTBUFSRX; i++) {
401 		info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
402 		info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
403 		info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
404 	}
405 	info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
406 
407 	/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
408 	 * Settings:    Last, Tx CRC */
409 	for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
410 		info->txbd[i].cbd_sc = 0;
411 		info->txbd[i].cbd_datlen = 0;
412 		info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
413 	}
414 	info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
415 
416 	info->usedTbdIdx = 0;
417 	info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
418 
419 	/* Set Rx FIFO alarm and granularity value */
420 	fecp->rfcr = 0x0c000000;
421 	fecp->rfar = 0x0000030c;
422 
423 	/* Set Tx FIFO granularity value */
424 	fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
425 	fecp->tfar = 0x00000080;
426 
427 	fecp->tfwr = 0x2;
428 	fecp->ctcwr = 0x03000000;
429 
430 	/* Enable DMA receive task */
431 	MCD_startDma(info->rxTask,	/* Dma channel */
432 		     (s8 *) info->rxbd,	/*Source Address */
433 		     0,		/* Source increment */
434 		     (s8 *) (&fecp->rfdr),	/* dest */
435 		     4,		/* dest increment */
436 		     0,		/* DMA size */
437 		     4,		/* xfer size */
438 		     info->rxInit,	/* initiator */
439 		     info->rxPri,	/* priority */
440 		     (MCD_FECRX_DMA | MCD_TT_FLAGS_DEF),	/* Flags */
441 		     (MCD_NO_CSUM | MCD_NO_BYTE_SWAP)	/* Function description */
442 	    );
443 
444 	/* Enable DMA tx task with no ready buffer descriptors */
445 	MCD_startDma(info->txTask,	/* Dma channel */
446 		     (s8 *) info->txbd,	/*Source Address */
447 		     0,		/* Source increment */
448 		     (s8 *) (&fecp->tfdr),	/* dest */
449 		     4,		/* dest incr */
450 		     0,		/* DMA size */
451 		     4,		/* xfer size */
452 		     info->txInit,	/* initiator */
453 		     info->txPri,	/* priority */
454 		     (MCD_FECTX_DMA | MCD_TT_FLAGS_DEF),	/* Flags */
455 		     (MCD_NO_CSUM | MCD_NO_BYTE_SWAP)	/* Function description */
456 	    );
457 
458 	/* Now enable the transmit and receive processing */
459 	fecp->ecr |= FEC_ECR_ETHER_EN;
460 
461 	return 1;
462 }
463 
464 static void fec_halt(struct eth_device *dev)
465 {
466 	struct fec_info_dma *info = dev->priv;
467 	volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
468 	int counter = 0xffff;
469 
470 	/* issue graceful stop command to the FEC transmitter if necessary */
471 	fecp->tcr |= FEC_TCR_GTS;
472 
473 	/* wait for graceful stop to register */
474 	while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) ;
475 
476 	/* Disable DMA tasks */
477 	MCD_killDma(info->txTask);
478 	MCD_killDma(info->rxTask);
479 
480 	/* Disable the Ethernet Controller */
481 	fecp->ecr &= ~FEC_ECR_ETHER_EN;
482 
483 	/* Clear FIFO status registers */
484 	fecp->rfsr &= FIFO_ERRSTAT;
485 	fecp->tfsr &= FIFO_ERRSTAT;
486 
487 	fecp->frst = 0x01000000;
488 
489 	/* Issue a reset command to the FEC chip */
490 	fecp->ecr |= FEC_ECR_RESET;
491 
492 	/* wait at least 20 clock cycles */
493 	udelay(10000);
494 
495 #ifdef ET_DEBUG
496 	printf("Ethernet task stopped\n");
497 #endif
498 }
499 
500 int mcdmafec_initialize(bd_t * bis)
501 {
502 	struct eth_device *dev;
503 	int i;
504 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
505 	u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
506 #endif
507 
508 	for (i = 0; i < ARRAY_SIZE(fec_info); i++) {
509 
510 		dev =
511 		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
512 						  sizeof *dev);
513 		if (dev == NULL)
514 			hang();
515 
516 		memset(dev, 0, sizeof(*dev));
517 
518 		sprintf(dev->name, "FEC%d", fec_info[i].index);
519 
520 		dev->priv = &fec_info[i];
521 		dev->init = fec_init;
522 		dev->halt = fec_halt;
523 		dev->send = fec_send;
524 		dev->recv = fec_recv;
525 
526 		/* setup Receive and Transmit buffer descriptor */
527 #ifdef CONFIG_SYS_DMA_USE_INTSRAM
528 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
529 		tmp = (u32)fec_info[i].rxbd;
530 		fec_info[i].txbd =
531 		    (cbd_t *)((u32)fec_info[i].txbd + tmp +
532 		    (PKTBUFSRX * sizeof(cbd_t)));
533 		tmp = (u32)fec_info[i].txbd;
534 		fec_info[i].txbuf =
535 		    (char *)((u32)fec_info[i].txbuf + tmp +
536 		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
537 		tmp = (u32)fec_info[i].txbuf;
538 #else
539 		fec_info[i].rxbd =
540 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
541 				       (PKTBUFSRX * sizeof(cbd_t)));
542 		fec_info[i].txbd =
543 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
544 				       (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
545 		fec_info[i].txbuf =
546 		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
547 #endif
548 
549 #ifdef ET_DEBUG
550 		printf("rxbd %x txbd %x\n",
551 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
552 #endif
553 
554 		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
555 
556 		eth_register(dev);
557 
558 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
559 		int retval;
560 		struct mii_dev *mdiodev = mdio_alloc();
561 		if (!mdiodev)
562 			return -ENOMEM;
563 		strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
564 		mdiodev->read = mcffec_miiphy_read;
565 		mdiodev->write = mcffec_miiphy_write;
566 
567 		retval = mdio_register(mdiodev);
568 		if (retval < 0)
569 			return retval;
570 #endif
571 
572 		if (i > 0)
573 			fec_info[i - 1].next = &fec_info[i];
574 	}
575 	fec_info[i - 1].next = &fec_info[0];
576 
577 	/* default speed */
578 	bis->bi_ethspeed = 10;
579 
580 	return 0;
581 }
582