xref: /openbmc/u-boot/drivers/net/fm/init.c (revision ebce73f0)
1 /*
2  * Copyright 2011-2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 #include <errno.h>
7 #include <common.h>
8 #include <asm/io.h>
9 #include <fdt_support.h>
10 #include <fsl_mdio.h>
11 #ifdef CONFIG_FSL_LAYERSCAPE
12 #include <asm/arch/fsl_serdes.h>
13 #else
14 #include <asm/fsl_serdes.h>
15 #endif
16 
17 #include "fm.h"
18 
19 struct fm_eth_info fm_info[] = {
20 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 1)
21 	FM_DTSEC_INFO_INITIALIZER(1, 1),
22 #endif
23 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 2)
24 	FM_DTSEC_INFO_INITIALIZER(1, 2),
25 #endif
26 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 3)
27 	FM_DTSEC_INFO_INITIALIZER(1, 3),
28 #endif
29 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 4)
30 	FM_DTSEC_INFO_INITIALIZER(1, 4),
31 #endif
32 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
33 	FM_DTSEC_INFO_INITIALIZER(1, 5),
34 #endif
35 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
36 	FM_DTSEC_INFO_INITIALIZER(1, 6),
37 #endif
38 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
39 	FM_DTSEC_INFO_INITIALIZER(1, 9),
40 #endif
41 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
42 	FM_DTSEC_INFO_INITIALIZER(1, 10),
43 #endif
44 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
45 	FM_DTSEC_INFO_INITIALIZER(2, 1),
46 #endif
47 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 2)
48 	FM_DTSEC_INFO_INITIALIZER(2, 2),
49 #endif
50 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 3)
51 	FM_DTSEC_INFO_INITIALIZER(2, 3),
52 #endif
53 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
54 	FM_DTSEC_INFO_INITIALIZER(2, 4),
55 #endif
56 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
57 	FM_DTSEC_INFO_INITIALIZER(2, 5),
58 #endif
59 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
60 	FM_DTSEC_INFO_INITIALIZER(2, 6),
61 #endif
62 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
63 	FM_DTSEC_INFO_INITIALIZER(2, 9),
64 #endif
65 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
66 	FM_DTSEC_INFO_INITIALIZER(2, 10),
67 #endif
68 #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
69 	FM_TGEC_INFO_INITIALIZER(1, 1),
70 #endif
71 #if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
72 	FM_TGEC_INFO_INITIALIZER(1, 2),
73 #endif
74 #if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
75 	FM_TGEC_INFO_INITIALIZER2(1, 3),
76 #endif
77 #if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
78 	FM_TGEC_INFO_INITIALIZER2(1, 4),
79 #endif
80 #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
81 	FM_TGEC_INFO_INITIALIZER(2, 1),
82 #endif
83 #if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
84 	FM_TGEC_INFO_INITIALIZER(2, 2),
85 #endif
86 };
87 
88 int fm_standard_init(bd_t *bis)
89 {
90 	int i;
91 	struct ccsr_fman *reg;
92 
93 	reg = (void *)CONFIG_SYS_FSL_FM1_ADDR;
94 	if (fm_init_common(0, reg))
95 		return 0;
96 
97 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
98 		if ((fm_info[i].enabled) && (fm_info[i].index == 1))
99 			fm_eth_initialize(reg, &fm_info[i]);
100 	}
101 
102 #if (CONFIG_SYS_NUM_FMAN == 2)
103 	reg = (void *)CONFIG_SYS_FSL_FM2_ADDR;
104 	if (fm_init_common(1, reg))
105 		return 0;
106 
107 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
108 		if ((fm_info[i].enabled) && (fm_info[i].index == 2))
109 			fm_eth_initialize(reg, &fm_info[i]);
110 	}
111 #endif
112 
113 	return 1;
114 }
115 
116 /* simple linear search to map from port to array index */
117 static int fm_port_to_index(enum fm_port port)
118 {
119 	int i;
120 
121 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
122 		if (fm_info[i].port == port)
123 			return i;
124 	}
125 
126 	return -1;
127 }
128 
129 /*
130  * Determine if an interface is actually active based on HW config
131  * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NONE if
132  * the interface is not active based on HW cfg of the SoC
133  */
134 void fman_enet_init(void)
135 {
136 	int i;
137 
138 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
139 		phy_interface_t enet_if;
140 
141 		enet_if = fman_port_enet_if(fm_info[i].port);
142 		if (enet_if != PHY_INTERFACE_MODE_NONE) {
143 			fm_info[i].enabled = 1;
144 			fm_info[i].enet_if = enet_if;
145 		} else {
146 			fm_info[i].enabled = 0;
147 		}
148 	}
149 
150 	return ;
151 }
152 
153 void fm_disable_port(enum fm_port port)
154 {
155 	int i = fm_port_to_index(port);
156 
157 	if (i == -1)
158 		return;
159 
160 	fm_info[i].enabled = 0;
161 #ifndef CONFIG_SYS_FMAN_V3
162 	fman_disable_port(port);
163 #endif
164 }
165 
166 void fm_enable_port(enum fm_port port)
167 {
168 	int i = fm_port_to_index(port);
169 
170 	if (i == -1)
171 		return;
172 
173 	fm_info[i].enabled = 1;
174 	fman_enable_port(port);
175 }
176 
177 void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
178 {
179 	int i = fm_port_to_index(port);
180 
181 	if (i == -1)
182 		return;
183 
184 	fm_info[i].bus = bus;
185 }
186 
187 void fm_info_set_phy_address(enum fm_port port, int address)
188 {
189 	int i = fm_port_to_index(port);
190 
191 	if (i == -1)
192 		return;
193 
194 	fm_info[i].phy_addr = address;
195 }
196 
197 /*
198  * Returns the PHY address for a given Fman port
199  *
200  * The port must be set via a prior call to fm_info_set_phy_address().
201  * A negative error code is returned if the port is invalid.
202  */
203 int fm_info_get_phy_address(enum fm_port port)
204 {
205 	int i = fm_port_to_index(port);
206 
207 	if (i == -1)
208 		return -1;
209 
210 	return fm_info[i].phy_addr;
211 }
212 
213 /*
214  * Returns the type of the data interface between the given MAC and its PHY.
215  * This is typically determined by the RCW.
216  */
217 phy_interface_t fm_info_get_enet_if(enum fm_port port)
218 {
219 	int i = fm_port_to_index(port);
220 
221 	if (i == -1)
222 		return PHY_INTERFACE_MODE_NONE;
223 
224 	if (fm_info[i].enabled)
225 		return fm_info[i].enet_if;
226 
227 	return PHY_INTERFACE_MODE_NONE;
228 }
229 
230 static void
231 __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
232 				enum fm_port port, int offset)
233 {
234 	return ;
235 }
236 
237 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
238 				enum fm_port port, int offset)
239 	 __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
240 
241 int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
242 {
243 	int off;
244 	uint32_t ph;
245 	phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
246 #ifndef CONFIG_SYS_FMAN_V3
247 	u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
248 				CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
249 #endif
250 
251 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
252 	if (off == -FDT_ERR_NOTFOUND)
253 		return -EINVAL;
254 
255 	if (info->enabled) {
256 		fdt_fixup_phy_connection(blob, off, info->enet_if);
257 		board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
258 		return 0;
259 	}
260 
261 #ifdef CONFIG_SYS_FMAN_V3
262 #ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
263 	/*
264 	 * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
265 	 * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
266 	 * is disabled, ensure that the dual-role MAC is not disabled,
267 	 * ditto for other dual-role MACs.
268 	 */
269 	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
270 	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
271 	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
272 	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
273 	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
274 	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
275 	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
276 	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
277 #if (CONFIG_SYS_NUM_FMAN == 2)
278 										||
279 	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
280 	    ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))	||
281 	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
282 	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
283 #endif
284 #else
285 	/* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
286 	if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
287 	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
288 	    ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
289 	    ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
290 	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
291 	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
292 	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
293 	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
294 #endif
295 	)
296 		return 0;
297 #endif
298 	/* board code might have caused offset to change */
299 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
300 
301 #ifndef CONFIG_SYS_FMAN_V3
302 	/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
303 	if (paddr != dtsec1_addr)
304 #endif
305 		fdt_status_disabled(blob, off); /* disable the MAC node */
306 
307 	/* disable the fsl,dpa-ethernet node that points to the MAC */
308 	ph = fdt_get_phandle(blob, off);
309 	do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
310 		"status", "disabled", strlen("disabled") + 1, 1);
311 
312 	return 0;
313 }
314 
315 void fdt_fixup_fman_ethernet(void *blob)
316 {
317 	int i;
318 
319 #ifdef CONFIG_SYS_FMAN_V3
320 	for (i = 0; i < ARRAY_SIZE(fm_info); i++)
321 		ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
322 #else
323 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
324 		/* Try the new compatible first.
325 		 * If the node is missing, try the old.
326 		 */
327 		if (fm_info[i].type == FM_ETH_1G_E) {
328 			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
329 				ft_fixup_port(blob, &fm_info[i],
330 					      "fsl,fman-1g-mac");
331 		} else {
332 			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
333 				ft_fixup_port(blob, &fm_info[i],
334 					      "fsl,fman-10g-mac");
335 		}
336 	}
337 #endif
338 }
339 
340 /*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
341  *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
342  *then set the correct PHY address
343  */
344 void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
345 		unsigned int port_num, int phy_base_addr)
346 {
347 	unsigned int regnum = 0;
348 	int qsgmii;
349 	int i;
350 	int phy_real_addr;
351 
352 	qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
353 
354 	if (!qsgmii)
355 		return;
356 
357 	for (i = base_port; i < base_port + port_num; i++) {
358 		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
359 			phy_real_addr = phy_base_addr + i - base_port;
360 			fm_info_set_phy_address(i, phy_real_addr);
361 		}
362 	}
363 }
364 
365 /*to check whether qsgmii riser card is used*/
366 int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
367 		unsigned int port_num, unsigned regnum)
368 {
369 	int i;
370 	int val;
371 
372 	if (!bus)
373 		return 0;
374 
375 	for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
376 		val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
377 		if (val != MIIM_TIMEOUT)
378 			return 1;
379 	}
380 
381 	return 0;
382 }
383