1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * Dave Liu <daveliu@freescale.com> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 #include <common.h> 21 #include <malloc.h> 22 #include <asm/io.h> 23 #include <asm/errno.h> 24 25 #include "fm.h" 26 #include "../../qe/qe.h" /* For struct qe_firmware */ 27 28 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND 29 #include <nand.h> 30 #elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH) 31 #include <spi_flash.h> 32 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_MMC) 33 #include <mmc.h> 34 #endif 35 36 struct fm_muram muram[CONFIG_SYS_NUM_FMAN]; 37 38 u32 fm_muram_base(int fm_idx) 39 { 40 return muram[fm_idx].base; 41 } 42 43 u32 fm_muram_alloc(int fm_idx, u32 size, u32 align) 44 { 45 u32 ret; 46 u32 align_mask, off; 47 u32 save; 48 49 align_mask = align - 1; 50 save = muram[fm_idx].alloc; 51 52 off = save & align_mask; 53 if (off != 0) 54 muram[fm_idx].alloc += (align - off); 55 off = size & align_mask; 56 if (off != 0) 57 size += (align - off); 58 if ((muram[fm_idx].alloc + size) >= muram[fm_idx].top) { 59 muram[fm_idx].alloc = save; 60 printf("%s: run out of ram.\n", __func__); 61 } 62 63 ret = muram[fm_idx].alloc; 64 muram[fm_idx].alloc += size; 65 memset((void *)ret, 0, size); 66 67 return ret; 68 } 69 70 static void fm_init_muram(int fm_idx, void *reg) 71 { 72 u32 base = (u32)reg; 73 74 muram[fm_idx].base = base; 75 muram[fm_idx].size = CONFIG_SYS_FM_MURAM_SIZE; 76 muram[fm_idx].alloc = base + FM_MURAM_RES_SIZE; 77 muram[fm_idx].top = base + CONFIG_SYS_FM_MURAM_SIZE; 78 } 79 80 /* 81 * fm_upload_ucode - Fman microcode upload worker function 82 * 83 * This function does the actual uploading of an Fman microcode 84 * to an Fman. 85 */ 86 static void fm_upload_ucode(int fm_idx, struct fm_imem *imem, 87 u32 *ucode, unsigned int size) 88 { 89 unsigned int i; 90 unsigned int timeout = 1000000; 91 92 /* enable address auto increase */ 93 out_be32(&imem->iadd, IRAM_IADD_AIE); 94 /* write microcode to IRAM */ 95 for (i = 0; i < size / 4; i++) 96 out_be32(&imem->idata, ucode[i]); 97 98 /* verify if the writing is over */ 99 out_be32(&imem->iadd, 0); 100 while ((in_be32(&imem->idata) != ucode[0]) && --timeout) 101 ; 102 if (!timeout) 103 printf("Fman%u: microcode upload timeout\n", fm_idx + 1); 104 105 /* enable microcode from IRAM */ 106 out_be32(&imem->iready, IRAM_READY); 107 } 108 109 /* 110 * Upload an Fman firmware 111 * 112 * This function is similar to qe_upload_firmware(), exception that it uploads 113 * a microcode to the Fman instead of the QE. 114 * 115 * Because the process for uploading a microcode to the Fman is similar for 116 * that of the QE, the QE firmware binary format is used for Fman microcode. 117 * It should be possible to unify these two functions, but for now we keep them 118 * separate. 119 */ 120 static int fman_upload_firmware(int fm_idx, 121 struct fm_imem *fm_imem, 122 const struct qe_firmware *firmware) 123 { 124 unsigned int i; 125 u32 crc; 126 size_t calc_size = sizeof(struct qe_firmware); 127 size_t length; 128 const struct qe_header *hdr; 129 130 if (!firmware) { 131 printf("Fman%u: Invalid address for firmware\n", fm_idx + 1); 132 return -EINVAL; 133 } 134 135 hdr = &firmware->header; 136 length = be32_to_cpu(hdr->length); 137 138 /* Check the magic */ 139 if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || 140 (hdr->magic[2] != 'F')) { 141 printf("Fman%u: Data at %p is not a firmware\n", fm_idx + 1, 142 firmware); 143 return -EPERM; 144 } 145 146 /* Check the version */ 147 if (hdr->version != 1) { 148 printf("Fman%u: Unsupported firmware version %u\n", fm_idx + 1, 149 hdr->version); 150 return -EPERM; 151 } 152 153 /* Validate some of the fields */ 154 if ((firmware->count != 1)) { 155 printf("Fman%u: Invalid data in firmware header\n", fm_idx + 1); 156 return -EINVAL; 157 } 158 159 /* Validate the length and check if there's a CRC */ 160 calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); 161 162 for (i = 0; i < firmware->count; i++) 163 /* 164 * For situations where the second RISC uses the same microcode 165 * as the first, the 'code_offset' and 'count' fields will be 166 * zero, so it's okay to add those. 167 */ 168 calc_size += sizeof(u32) * 169 be32_to_cpu(firmware->microcode[i].count); 170 171 /* Validate the length */ 172 if (length != calc_size + sizeof(u32)) { 173 printf("Fman%u: Invalid length in firmware header\n", 174 fm_idx + 1); 175 return -EPERM; 176 } 177 178 /* 179 * Validate the CRC. We would normally call crc32_no_comp(), but that 180 * function isn't available unless you turn on JFFS support. 181 */ 182 crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); 183 if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) { 184 printf("Fman%u: Firmware CRC is invalid\n", fm_idx + 1); 185 return -EIO; 186 } 187 188 /* Loop through each microcode. */ 189 for (i = 0; i < firmware->count; i++) { 190 const struct qe_microcode *ucode = &firmware->microcode[i]; 191 192 /* Upload a microcode if it's present */ 193 if (ucode->code_offset) { 194 u32 ucode_size; 195 u32 *code; 196 printf("Fman%u: Uploading microcode version %u.%u.%u\n", 197 fm_idx + 1, ucode->major, ucode->minor, 198 ucode->revision); 199 code = (void *)firmware + ucode->code_offset; 200 ucode_size = sizeof(u32) * ucode->count; 201 fm_upload_ucode(fm_idx, fm_imem, code, ucode_size); 202 } 203 } 204 205 return 0; 206 } 207 208 static u32 fm_assign_risc(int port_id) 209 { 210 u32 risc_sel, val; 211 risc_sel = (port_id & 0x1) ? FMFPPRC_RISC2 : FMFPPRC_RISC1; 212 val = (port_id << FMFPPRC_PORTID_SHIFT) & FMFPPRC_PORTID_MASK; 213 val |= ((risc_sel << FMFPPRC_ORA_SHIFT) | risc_sel); 214 215 return val; 216 } 217 218 static void fm_init_fpm(struct fm_fpm *fpm) 219 { 220 int i, port_id; 221 u32 val; 222 223 setbits_be32(&fpm->fmfpee, FMFPEE_EHM | FMFPEE_UEC | 224 FMFPEE_CER | FMFPEE_DER); 225 226 /* IM mode, each even port ID to RISC#1, each odd port ID to RISC#2 */ 227 228 /* offline/parser port */ 229 for (i = 0; i < MAX_NUM_OH_PORT; i++) { 230 port_id = OH_PORT_ID_BASE + i; 231 val = fm_assign_risc(port_id); 232 out_be32(&fpm->fpmprc, val); 233 } 234 /* Rx 1G port */ 235 for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) { 236 port_id = RX_PORT_1G_BASE + i; 237 val = fm_assign_risc(port_id); 238 out_be32(&fpm->fpmprc, val); 239 } 240 /* Tx 1G port */ 241 for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) { 242 port_id = TX_PORT_1G_BASE + i; 243 val = fm_assign_risc(port_id); 244 out_be32(&fpm->fpmprc, val); 245 } 246 /* Rx 10G port */ 247 port_id = RX_PORT_10G_BASE; 248 val = fm_assign_risc(port_id); 249 out_be32(&fpm->fpmprc, val); 250 /* Tx 10G port */ 251 port_id = TX_PORT_10G_BASE; 252 val = fm_assign_risc(port_id); 253 out_be32(&fpm->fpmprc, val); 254 255 /* disable the dispatch limit in IM case */ 256 out_be32(&fpm->fpmflc, FMFP_FLC_DISP_LIM_NONE); 257 /* clear events */ 258 out_be32(&fpm->fmfpee, FMFPEE_CLEAR_EVENT); 259 260 /* clear risc events */ 261 for (i = 0; i < 4; i++) 262 out_be32(&fpm->fpmcev[i], 0xffffffff); 263 264 /* clear error */ 265 out_be32(&fpm->fpmrcr, FMFP_RCR_MDEC | FMFP_RCR_IDEC); 266 } 267 268 static int fm_init_bmi(int fm_idx, struct fm_bmi_common *bmi) 269 { 270 int blk, i, port_id; 271 u32 val, offset, base; 272 273 /* alloc free buffer pool in MURAM */ 274 base = fm_muram_alloc(fm_idx, FM_FREE_POOL_SIZE, FM_FREE_POOL_ALIGN); 275 if (!base) { 276 printf("%s: no muram for free buffer pool\n", __func__); 277 return -ENOMEM; 278 } 279 offset = base - fm_muram_base(fm_idx); 280 281 /* Need 128KB total free buffer pool size */ 282 val = offset / 256; 283 blk = FM_FREE_POOL_SIZE / 256; 284 /* in IM, we must not begin from offset 0 in MURAM */ 285 val |= ((blk - 1) << FMBM_CFG1_FBPS_SHIFT); 286 out_be32(&bmi->fmbm_cfg1, val); 287 288 /* disable all BMI interrupt */ 289 out_be32(&bmi->fmbm_ier, FMBM_IER_DISABLE_ALL); 290 291 /* clear all events */ 292 out_be32(&bmi->fmbm_ievr, FMBM_IEVR_CLEAR_ALL); 293 294 /* 295 * set port parameters - FMBM_PP_x 296 * max tasks 10G Rx/Tx=12, 1G Rx/Tx 4, others is 1 297 * max dma 10G Rx/Tx=3, others is 1 298 * set port FIFO size - FMBM_PFS_x 299 * 4KB for all Rx and Tx ports 300 */ 301 /* offline/parser port */ 302 for (i = 0; i < MAX_NUM_OH_PORT; i++) { 303 port_id = OH_PORT_ID_BASE + i - 1; 304 /* max tasks=1, max dma=1, no extra */ 305 out_be32(&bmi->fmbm_pp[port_id], 0); 306 /* port FIFO size - 256 bytes, no extra */ 307 out_be32(&bmi->fmbm_pfs[port_id], 0); 308 } 309 /* Rx 1G port */ 310 for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) { 311 port_id = RX_PORT_1G_BASE + i - 1; 312 /* max tasks=4, max dma=1, no extra */ 313 out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4)); 314 /* FIFO size - 4KB, no extra */ 315 out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); 316 } 317 /* Tx 1G port FIFO size - 4KB, no extra */ 318 for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) { 319 port_id = TX_PORT_1G_BASE + i - 1; 320 /* max tasks=4, max dma=1, no extra */ 321 out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4)); 322 /* FIFO size - 4KB, no extra */ 323 out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); 324 } 325 /* Rx 10G port */ 326 port_id = RX_PORT_10G_BASE - 1; 327 /* max tasks=12, max dma=3, no extra */ 328 out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3)); 329 /* FIFO size - 4KB, no extra */ 330 out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); 331 332 /* Tx 10G port */ 333 port_id = TX_PORT_10G_BASE - 1; 334 /* max tasks=12, max dma=3, no extra */ 335 out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3)); 336 /* FIFO size - 4KB, no extra */ 337 out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); 338 339 /* initialize internal buffers data base (linked list) */ 340 out_be32(&bmi->fmbm_init, FMBM_INIT_START); 341 342 return 0; 343 } 344 345 static void fm_init_qmi(struct fm_qmi_common *qmi) 346 { 347 /* disable enqueue and dequeue of QMI */ 348 clrbits_be32(&qmi->fmqm_gc, FMQM_GC_ENQ_EN | FMQM_GC_DEQ_EN); 349 350 /* disable all error interrupts */ 351 out_be32(&qmi->fmqm_eien, FMQM_EIEN_DISABLE_ALL); 352 /* clear all error events */ 353 out_be32(&qmi->fmqm_eie, FMQM_EIE_CLEAR_ALL); 354 355 /* disable all interrupts */ 356 out_be32(&qmi->fmqm_ien, FMQM_IEN_DISABLE_ALL); 357 /* clear all interrupts */ 358 out_be32(&qmi->fmqm_ie, FMQM_IE_CLEAR_ALL); 359 } 360 361 /* Init common part of FM, index is fm num# like fm as above */ 362 int fm_init_common(int index, struct ccsr_fman *reg) 363 { 364 int rc; 365 char env_addr[32]; 366 #if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR) 367 void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; 368 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND) 369 size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH; 370 void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH); 371 372 rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_ADDR, 373 &fw_length, (u_char *)addr); 374 if (rc == -EUCLEAN) { 375 printf("NAND read of FMAN firmware at offset 0x%x failed %d\n", 376 CONFIG_SYS_QE_FMAN_FW_ADDR, rc); 377 } 378 #elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH) 379 struct spi_flash *ucode_flash; 380 void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH); 381 int ret = 0; 382 383 ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, 384 CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); 385 if (!ucode_flash) 386 printf("SF: probe for ucode failed\n"); 387 else { 388 ret = spi_flash_read(ucode_flash, CONFIG_SYS_QE_FMAN_FW_ADDR, 389 CONFIG_SYS_QE_FMAN_FW_LENGTH, addr); 390 if (ret) 391 printf("SF: read for ucode failed\n"); 392 spi_flash_free(ucode_flash); 393 } 394 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_MMC) 395 int dev = CONFIG_SYS_MMC_ENV_DEV; 396 void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH); 397 u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512; 398 u32 blk = CONFIG_SYS_QE_FMAN_FW_ADDR / 512; 399 struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); 400 401 if (!mmc) 402 printf("\nMMC cannot find device for ucode\n"); 403 else { 404 printf("\nMMC read: dev # %u, block # %u, count %u ...\n", 405 dev, blk, cnt); 406 mmc_init(mmc); 407 (void)mmc->block_dev.block_read(dev, blk, cnt, addr); 408 /* flush cache after read */ 409 flush_cache((ulong)addr, cnt * 512); 410 } 411 #endif 412 413 /* Upload the Fman microcode if it's present */ 414 rc = fman_upload_firmware(index, ®->fm_imem, addr); 415 if (rc) 416 return rc; 417 sprintf(env_addr, "0x%lx", (long unsigned int)addr); 418 setenv("fman_ucode", env_addr); 419 420 fm_init_muram(index, ®->muram); 421 fm_init_qmi(®->fm_qmi_common); 422 fm_init_fpm(®->fm_fpm); 423 424 /* clear DMA status */ 425 setbits_be32(®->fm_dma.fmdmsr, FMDMSR_CLEAR_ALL); 426 427 /* set DMA mode */ 428 setbits_be32(®->fm_dma.fmdmmr, FMDMMR_SBER); 429 430 return fm_init_bmi(index, ®->fm_bmi_common); 431 } 432