1 /* 2 * Cirrus Logic EP93xx ethernet MAC / MII driver. 3 * 4 * Copyright (C) 2010, 2009 5 * Matthias Kaehlcke <matthias@kaehlcke.net> 6 * 7 * Copyright (C) 2004, 2005 8 * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> 9 * 10 * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver, 11 * which is 12 * 13 * (C) Copyright 2002 2003 14 * Adam Bezanson, Network Audio Technologies, Inc. 15 * <bezanson@netaudiotech.com> 16 * 17 * SPDX-License-Identifier: GPL-2.0+ 18 */ 19 20 #include <command.h> 21 #include <common.h> 22 #include <asm/arch/ep93xx.h> 23 #include <asm/io.h> 24 #include <malloc.h> 25 #include <miiphy.h> 26 #include <linux/types.h> 27 #include "ep93xx_eth.h" 28 29 #define GET_PRIV(eth_dev) ((struct ep93xx_priv *)(eth_dev)->priv) 30 #define GET_REGS(eth_dev) (GET_PRIV(eth_dev)->regs) 31 32 /* ep93xx_miiphy ops forward declarations */ 33 static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr, 34 unsigned char const reg, unsigned short * const value); 35 static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr, 36 unsigned char const reg, unsigned short const value); 37 38 #if defined(EP93XX_MAC_DEBUG) 39 /** 40 * Dump ep93xx_mac values to the terminal. 41 */ 42 static void dump_dev(struct eth_device *dev) 43 { 44 struct ep93xx_priv *priv = GET_PRIV(dev); 45 int i; 46 47 printf("\ndump_dev()\n"); 48 printf(" rx_dq.base %p\n", priv->rx_dq.base); 49 printf(" rx_dq.current %p\n", priv->rx_dq.current); 50 printf(" rx_dq.end %p\n", priv->rx_dq.end); 51 printf(" rx_sq.base %p\n", priv->rx_sq.base); 52 printf(" rx_sq.current %p\n", priv->rx_sq.current); 53 printf(" rx_sq.end %p\n", priv->rx_sq.end); 54 55 for (i = 0; i < NUMRXDESC; i++) 56 printf(" rx_buffer[%2.d] %p\n", i, net_rx_packets[i]); 57 58 printf(" tx_dq.base %p\n", priv->tx_dq.base); 59 printf(" tx_dq.current %p\n", priv->tx_dq.current); 60 printf(" tx_dq.end %p\n", priv->tx_dq.end); 61 printf(" tx_sq.base %p\n", priv->tx_sq.base); 62 printf(" tx_sq.current %p\n", priv->tx_sq.current); 63 printf(" tx_sq.end %p\n", priv->tx_sq.end); 64 } 65 66 /** 67 * Dump all RX status queue entries to the terminal. 68 */ 69 static void dump_rx_status_queue(struct eth_device *dev) 70 { 71 struct ep93xx_priv *priv = GET_PRIV(dev); 72 int i; 73 74 printf("\ndump_rx_status_queue()\n"); 75 printf(" descriptor address word1 word2\n"); 76 for (i = 0; i < NUMRXDESC; i++) { 77 printf(" [ %p ] %08X %08X\n", 78 priv->rx_sq.base + i, 79 (priv->rx_sq.base + i)->word1, 80 (priv->rx_sq.base + i)->word2); 81 } 82 } 83 84 /** 85 * Dump all RX descriptor queue entries to the terminal. 86 */ 87 static void dump_rx_descriptor_queue(struct eth_device *dev) 88 { 89 struct ep93xx_priv *priv = GET_PRIV(dev); 90 int i; 91 92 printf("\ndump_rx_descriptor_queue()\n"); 93 printf(" descriptor address word1 word2\n"); 94 for (i = 0; i < NUMRXDESC; i++) { 95 printf(" [ %p ] %08X %08X\n", 96 priv->rx_dq.base + i, 97 (priv->rx_dq.base + i)->word1, 98 (priv->rx_dq.base + i)->word2); 99 } 100 } 101 102 /** 103 * Dump all TX descriptor queue entries to the terminal. 104 */ 105 static void dump_tx_descriptor_queue(struct eth_device *dev) 106 { 107 struct ep93xx_priv *priv = GET_PRIV(dev); 108 int i; 109 110 printf("\ndump_tx_descriptor_queue()\n"); 111 printf(" descriptor address word1 word2\n"); 112 for (i = 0; i < NUMTXDESC; i++) { 113 printf(" [ %p ] %08X %08X\n", 114 priv->tx_dq.base + i, 115 (priv->tx_dq.base + i)->word1, 116 (priv->tx_dq.base + i)->word2); 117 } 118 } 119 120 /** 121 * Dump all TX status queue entries to the terminal. 122 */ 123 static void dump_tx_status_queue(struct eth_device *dev) 124 { 125 struct ep93xx_priv *priv = GET_PRIV(dev); 126 int i; 127 128 printf("\ndump_tx_status_queue()\n"); 129 printf(" descriptor address word1\n"); 130 for (i = 0; i < NUMTXDESC; i++) { 131 printf(" [ %p ] %08X\n", 132 priv->rx_sq.base + i, 133 (priv->rx_sq.base + i)->word1); 134 } 135 } 136 #else 137 #define dump_dev(x) 138 #define dump_rx_descriptor_queue(x) 139 #define dump_rx_status_queue(x) 140 #define dump_tx_descriptor_queue(x) 141 #define dump_tx_status_queue(x) 142 #endif /* defined(EP93XX_MAC_DEBUG) */ 143 144 /** 145 * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until 146 * it's cleared. 147 */ 148 static void ep93xx_mac_reset(struct eth_device *dev) 149 { 150 struct mac_regs *mac = GET_REGS(dev); 151 uint32_t value; 152 153 debug("+ep93xx_mac_reset"); 154 155 value = readl(&mac->selfctl); 156 value |= SELFCTL_RESET; 157 writel(value, &mac->selfctl); 158 159 while (readl(&mac->selfctl) & SELFCTL_RESET) 160 ; /* noop */ 161 162 debug("-ep93xx_mac_reset"); 163 } 164 165 /* Eth device open */ 166 static int ep93xx_eth_open(struct eth_device *dev, bd_t *bd) 167 { 168 struct ep93xx_priv *priv = GET_PRIV(dev); 169 struct mac_regs *mac = GET_REGS(dev); 170 uchar *mac_addr = dev->enetaddr; 171 int i; 172 173 debug("+ep93xx_eth_open"); 174 175 /* Reset the MAC */ 176 ep93xx_mac_reset(dev); 177 178 /* Reset the descriptor queues' current and end address values */ 179 priv->tx_dq.current = priv->tx_dq.base; 180 priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC); 181 182 priv->tx_sq.current = priv->tx_sq.base; 183 priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC); 184 185 priv->rx_dq.current = priv->rx_dq.base; 186 priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC); 187 188 priv->rx_sq.current = priv->rx_sq.base; 189 priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC); 190 191 /* 192 * Set the transmit descriptor and status queues' base address, 193 * current address, and length registers. Set the maximum frame 194 * length and threshold. Enable the transmit descriptor processor. 195 */ 196 writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd); 197 writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd); 198 writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen); 199 200 writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd); 201 writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd); 202 writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen); 203 204 writel(0x00040000, &mac->txdthrshld); 205 writel(0x00040000, &mac->txststhrshld); 206 207 writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen); 208 writel(BMCTL_TXEN, &mac->bmctl); 209 210 /* 211 * Set the receive descriptor and status queues' base address, 212 * current address, and length registers. Enable the receive 213 * descriptor processor. 214 */ 215 writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd); 216 writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd); 217 writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen); 218 219 writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd); 220 writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd); 221 writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen); 222 223 writel(0x00040000, &mac->rxdthrshld); 224 225 writel(BMCTL_RXEN, &mac->bmctl); 226 227 writel(0x00040000, &mac->rxststhrshld); 228 229 /* Wait until the receive descriptor processor is active */ 230 while (!(readl(&mac->bmsts) & BMSTS_RXACT)) 231 ; /* noop */ 232 233 /* 234 * Initialize the RX descriptor queue. Clear the TX descriptor queue. 235 * Clear the RX and TX status queues. Enqueue the RX descriptor and 236 * status entries to the MAC. 237 */ 238 for (i = 0; i < NUMRXDESC; i++) { 239 /* set buffer address */ 240 (priv->rx_dq.base + i)->word1 = (uint32_t)net_rx_packets[i]; 241 242 /* set buffer length, clear buffer index and NSOF */ 243 (priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN; 244 } 245 246 memset(priv->tx_dq.base, 0, 247 (sizeof(struct tx_descriptor) * NUMTXDESC)); 248 memset(priv->rx_sq.base, 0, 249 (sizeof(struct rx_status) * NUMRXDESC)); 250 memset(priv->tx_sq.base, 0, 251 (sizeof(struct tx_status) * NUMTXDESC)); 252 253 writel(NUMRXDESC, &mac->rxdqenq); 254 writel(NUMRXDESC, &mac->rxstsqenq); 255 256 /* Set the primary MAC address */ 257 writel(AFP_IAPRIMARY, &mac->afp); 258 writel(mac_addr[0] | (mac_addr[1] << 8) | 259 (mac_addr[2] << 16) | (mac_addr[3] << 24), 260 &mac->indad); 261 writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper); 262 263 /* Turn on RX and TX */ 264 writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON | 265 RXCTL_RCRCA | RXCTL_MA, &mac->rxctl); 266 writel(TXCTL_STXON, &mac->txctl); 267 268 /* Dump data structures if we're debugging */ 269 dump_dev(dev); 270 dump_rx_descriptor_queue(dev); 271 dump_rx_status_queue(dev); 272 dump_tx_descriptor_queue(dev); 273 dump_tx_status_queue(dev); 274 275 debug("-ep93xx_eth_open"); 276 277 return 1; 278 } 279 280 /** 281 * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL 282 * registers. 283 */ 284 static void ep93xx_eth_close(struct eth_device *dev) 285 { 286 struct mac_regs *mac = GET_REGS(dev); 287 288 debug("+ep93xx_eth_close"); 289 290 writel(0x00000000, &mac->rxctl); 291 writel(0x00000000, &mac->txctl); 292 293 debug("-ep93xx_eth_close"); 294 } 295 296 /** 297 * Copy a frame of data from the MAC into the protocol layer for further 298 * processing. 299 */ 300 static int ep93xx_eth_rcv_packet(struct eth_device *dev) 301 { 302 struct mac_regs *mac = GET_REGS(dev); 303 struct ep93xx_priv *priv = GET_PRIV(dev); 304 int len = -1; 305 306 debug("+ep93xx_eth_rcv_packet"); 307 308 if (RX_STATUS_RFP(priv->rx_sq.current)) { 309 if (RX_STATUS_RWE(priv->rx_sq.current)) { 310 /* 311 * We have a good frame. Extract the frame's length 312 * from the current rx_status_queue entry, and copy 313 * the frame's data into net_rx_packets[] of the 314 * protocol stack. We track the total number of 315 * bytes in the frame (nbytes_frame) which will be 316 * used when we pass the data off to the protocol 317 * layer via net_process_received_packet(). 318 */ 319 len = RX_STATUS_FRAME_LEN(priv->rx_sq.current); 320 321 net_process_received_packet( 322 (uchar *)priv->rx_dq.current->word1, len); 323 324 debug("reporting %d bytes...\n", len); 325 } else { 326 /* Do we have an erroneous packet? */ 327 error("packet rx error, status %08X %08X", 328 priv->rx_sq.current->word1, 329 priv->rx_sq.current->word2); 330 dump_rx_descriptor_queue(dev); 331 dump_rx_status_queue(dev); 332 } 333 334 /* 335 * Clear the associated status queue entry, and 336 * increment our current pointers to the next RX 337 * descriptor and status queue entries (making sure 338 * we wrap properly). 339 */ 340 memset((void *)priv->rx_sq.current, 0, 341 sizeof(struct rx_status)); 342 343 priv->rx_sq.current++; 344 if (priv->rx_sq.current >= priv->rx_sq.end) 345 priv->rx_sq.current = priv->rx_sq.base; 346 347 priv->rx_dq.current++; 348 if (priv->rx_dq.current >= priv->rx_dq.end) 349 priv->rx_dq.current = priv->rx_dq.base; 350 351 /* 352 * Finally, return the RX descriptor and status entries 353 * back to the MAC engine, and loop again, checking for 354 * more descriptors to process. 355 */ 356 writel(1, &mac->rxdqenq); 357 writel(1, &mac->rxstsqenq); 358 } else { 359 len = 0; 360 } 361 362 debug("-ep93xx_eth_rcv_packet %d", len); 363 return len; 364 } 365 366 /** 367 * Send a block of data via ethernet. 368 */ 369 static int ep93xx_eth_send_packet(struct eth_device *dev, 370 void * const packet, int const length) 371 { 372 struct mac_regs *mac = GET_REGS(dev); 373 struct ep93xx_priv *priv = GET_PRIV(dev); 374 int ret = -1; 375 376 debug("+ep93xx_eth_send_packet"); 377 378 /* Parameter check */ 379 BUG_ON(packet == NULL); 380 381 /* 382 * Initialize the TX descriptor queue with the new packet's info. 383 * Clear the associated status queue entry. Enqueue the packet 384 * to the MAC for transmission. 385 */ 386 387 /* set buffer address */ 388 priv->tx_dq.current->word1 = (uint32_t)packet; 389 390 /* set buffer length and EOF bit */ 391 priv->tx_dq.current->word2 = length | TX_DESC_EOF; 392 393 /* clear tx status */ 394 priv->tx_sq.current->word1 = 0; 395 396 /* enqueue the TX descriptor */ 397 writel(1, &mac->txdqenq); 398 399 /* wait for the frame to become processed */ 400 while (!TX_STATUS_TXFP(priv->tx_sq.current)) 401 ; /* noop */ 402 403 if (!TX_STATUS_TXWE(priv->tx_sq.current)) { 404 error("packet tx error, status %08X", 405 priv->tx_sq.current->word1); 406 dump_tx_descriptor_queue(dev); 407 dump_tx_status_queue(dev); 408 409 /* TODO: Add better error handling? */ 410 goto eth_send_out; 411 } 412 413 ret = 0; 414 /* Fall through */ 415 416 eth_send_out: 417 debug("-ep93xx_eth_send_packet %d", ret); 418 return ret; 419 } 420 421 #if defined(CONFIG_MII) 422 int ep93xx_miiphy_initialize(bd_t * const bd) 423 { 424 miiphy_register("ep93xx_eth0", ep93xx_miiphy_read, ep93xx_miiphy_write); 425 return 0; 426 } 427 #endif 428 429 /** 430 * Initialize the EP93xx MAC. The MAC hardware is reset. Buffers are 431 * allocated, if necessary, for the TX and RX descriptor and status queues, 432 * as well as for received packets. The EP93XX MAC hardware is initialized. 433 * Transmit and receive operations are enabled. 434 */ 435 int ep93xx_eth_initialize(u8 dev_num, int base_addr) 436 { 437 int ret = -1; 438 struct eth_device *dev; 439 struct ep93xx_priv *priv; 440 441 debug("+ep93xx_eth_initialize"); 442 443 priv = malloc(sizeof(*priv)); 444 if (!priv) { 445 error("malloc() failed"); 446 goto eth_init_failed_0; 447 } 448 memset(priv, 0, sizeof(*priv)); 449 450 priv->regs = (struct mac_regs *)base_addr; 451 452 priv->tx_dq.base = calloc(NUMTXDESC, 453 sizeof(struct tx_descriptor)); 454 if (priv->tx_dq.base == NULL) { 455 error("calloc() failed"); 456 goto eth_init_failed_1; 457 } 458 459 priv->tx_sq.base = calloc(NUMTXDESC, 460 sizeof(struct tx_status)); 461 if (priv->tx_sq.base == NULL) { 462 error("calloc() failed"); 463 goto eth_init_failed_2; 464 } 465 466 priv->rx_dq.base = calloc(NUMRXDESC, 467 sizeof(struct rx_descriptor)); 468 if (priv->rx_dq.base == NULL) { 469 error("calloc() failed"); 470 goto eth_init_failed_3; 471 } 472 473 priv->rx_sq.base = calloc(NUMRXDESC, 474 sizeof(struct rx_status)); 475 if (priv->rx_sq.base == NULL) { 476 error("calloc() failed"); 477 goto eth_init_failed_4; 478 } 479 480 dev = malloc(sizeof *dev); 481 if (dev == NULL) { 482 error("malloc() failed"); 483 goto eth_init_failed_5; 484 } 485 memset(dev, 0, sizeof *dev); 486 487 dev->iobase = base_addr; 488 dev->priv = priv; 489 dev->init = ep93xx_eth_open; 490 dev->halt = ep93xx_eth_close; 491 dev->send = ep93xx_eth_send_packet; 492 dev->recv = ep93xx_eth_rcv_packet; 493 494 sprintf(dev->name, "ep93xx_eth-%hu", dev_num); 495 496 eth_register(dev); 497 498 /* Done! */ 499 ret = 1; 500 goto eth_init_done; 501 502 eth_init_failed_5: 503 free(priv->rx_sq.base); 504 /* Fall through */ 505 506 eth_init_failed_4: 507 free(priv->rx_dq.base); 508 /* Fall through */ 509 510 eth_init_failed_3: 511 free(priv->tx_sq.base); 512 /* Fall through */ 513 514 eth_init_failed_2: 515 free(priv->tx_dq.base); 516 /* Fall through */ 517 518 eth_init_failed_1: 519 free(priv); 520 /* Fall through */ 521 522 eth_init_failed_0: 523 /* Fall through */ 524 525 eth_init_done: 526 debug("-ep93xx_eth_initialize %d", ret); 527 return ret; 528 } 529 530 #if defined(CONFIG_MII) 531 532 /** 533 * Maximum MII address we support 534 */ 535 #define MII_ADDRESS_MAX 31 536 537 /** 538 * Maximum MII register address we support 539 */ 540 #define MII_REGISTER_MAX 31 541 542 /** 543 * Read a 16-bit value from an MII register. 544 */ 545 static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr, 546 unsigned char const reg, unsigned short * const value) 547 { 548 struct mac_regs *mac = (struct mac_regs *)MAC_BASE; 549 int ret = -1; 550 uint32_t self_ctl; 551 552 debug("+ep93xx_miiphy_read"); 553 554 /* Parameter checks */ 555 BUG_ON(dev == NULL); 556 BUG_ON(addr > MII_ADDRESS_MAX); 557 BUG_ON(reg > MII_REGISTER_MAX); 558 BUG_ON(value == NULL); 559 560 /* 561 * Save the current SelfCTL register value. Set MAC to suppress 562 * preamble bits. Wait for any previous MII command to complete 563 * before issuing the new command. 564 */ 565 self_ctl = readl(&mac->selfctl); 566 #if defined(CONFIG_MII_SUPPRESS_PREAMBLE) 567 writel(self_ctl & ~(1 << 8), &mac->selfctl); 568 #endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */ 569 570 while (readl(&mac->miists) & MIISTS_BUSY) 571 ; /* noop */ 572 573 /* 574 * Issue the MII 'read' command. Wait for the command to complete. 575 * Read the MII data value. 576 */ 577 writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg, 578 &mac->miicmd); 579 while (readl(&mac->miists) & MIISTS_BUSY) 580 ; /* noop */ 581 582 *value = (unsigned short)readl(&mac->miidata); 583 584 /* Restore the saved SelfCTL value and return. */ 585 writel(self_ctl, &mac->selfctl); 586 587 ret = 0; 588 /* Fall through */ 589 590 debug("-ep93xx_miiphy_read"); 591 return ret; 592 } 593 594 /** 595 * Write a 16-bit value to an MII register. 596 */ 597 static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr, 598 unsigned char const reg, unsigned short const value) 599 { 600 struct mac_regs *mac = (struct mac_regs *)MAC_BASE; 601 int ret = -1; 602 uint32_t self_ctl; 603 604 debug("+ep93xx_miiphy_write"); 605 606 /* Parameter checks */ 607 BUG_ON(dev == NULL); 608 BUG_ON(addr > MII_ADDRESS_MAX); 609 BUG_ON(reg > MII_REGISTER_MAX); 610 611 /* 612 * Save the current SelfCTL register value. Set MAC to suppress 613 * preamble bits. Wait for any previous MII command to complete 614 * before issuing the new command. 615 */ 616 self_ctl = readl(&mac->selfctl); 617 #if defined(CONFIG_MII_SUPPRESS_PREAMBLE) 618 writel(self_ctl & ~(1 << 8), &mac->selfctl); 619 #endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */ 620 621 while (readl(&mac->miists) & MIISTS_BUSY) 622 ; /* noop */ 623 624 /* Issue the MII 'write' command. Wait for the command to complete. */ 625 writel((uint32_t)value, &mac->miidata); 626 writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg, 627 &mac->miicmd); 628 while (readl(&mac->miists) & MIISTS_BUSY) 629 ; /* noop */ 630 631 /* Restore the saved SelfCTL value and return. */ 632 writel(self_ctl, &mac->selfctl); 633 634 ret = 0; 635 /* Fall through */ 636 637 debug("-ep93xx_miiphy_write"); 638 return ret; 639 } 640 #endif /* defined(CONFIG_MII) */ 641