xref: /openbmc/u-boot/drivers/net/designware.c (revision 16263087)
1 /*
2  * (C) Copyright 2010
3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 /*
25  * Designware ethernet IP driver for u-boot
26  */
27 
28 #include <common.h>
29 #include <miiphy.h>
30 #include <malloc.h>
31 #include <linux/err.h>
32 #include <asm/io.h>
33 #include "designware.h"
34 
35 static void tx_descs_init(struct eth_device *dev)
36 {
37 	struct dw_eth_dev *priv = dev->priv;
38 	struct eth_dma_regs *dma_p = priv->dma_regs_p;
39 	struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
40 	char *txbuffs = &priv->txbuffs[0];
41 	struct dmamacdescr *desc_p;
42 	u32 idx;
43 
44 	for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
45 		desc_p = &desc_table_p[idx];
46 		desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
47 		desc_p->dmamac_next = &desc_table_p[idx + 1];
48 
49 #if defined(CONFIG_DW_ALTDESCRIPTOR)
50 		desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
51 				DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
52 				DESC_TXSTS_TXCHECKINSCTRL | \
53 				DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
54 
55 		desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
56 		desc_p->dmamac_cntl = 0;
57 		desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
58 #else
59 		desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
60 		desc_p->txrx_status = 0;
61 #endif
62 	}
63 
64 	/* Correcting the last pointer of the chain */
65 	desc_p->dmamac_next = &desc_table_p[0];
66 
67 	writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
68 }
69 
70 static void rx_descs_init(struct eth_device *dev)
71 {
72 	struct dw_eth_dev *priv = dev->priv;
73 	struct eth_dma_regs *dma_p = priv->dma_regs_p;
74 	struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
75 	char *rxbuffs = &priv->rxbuffs[0];
76 	struct dmamacdescr *desc_p;
77 	u32 idx;
78 
79 	for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
80 		desc_p = &desc_table_p[idx];
81 		desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
82 		desc_p->dmamac_next = &desc_table_p[idx + 1];
83 
84 		desc_p->dmamac_cntl =
85 			(MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
86 				      DESC_RXCTRL_RXCHAIN;
87 
88 		desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
89 	}
90 
91 	/* Correcting the last pointer of the chain */
92 	desc_p->dmamac_next = &desc_table_p[0];
93 
94 	writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
95 }
96 
97 static void descs_init(struct eth_device *dev)
98 {
99 	tx_descs_init(dev);
100 	rx_descs_init(dev);
101 }
102 
103 static int mac_reset(struct eth_device *dev)
104 {
105 	struct dw_eth_dev *priv = dev->priv;
106 	struct eth_mac_regs *mac_p = priv->mac_regs_p;
107 	struct eth_dma_regs *dma_p = priv->dma_regs_p;
108 
109 	int timeout = CONFIG_MACRESET_TIMEOUT;
110 
111 	writel(DMAMAC_SRST, &dma_p->busmode);
112 	writel(MII_PORTSELECT, &mac_p->conf);
113 
114 	do {
115 		if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
116 			return 0;
117 		udelay(1000);
118 	} while (timeout--);
119 
120 	return -1;
121 }
122 
123 static int dw_write_hwaddr(struct eth_device *dev)
124 {
125 	struct dw_eth_dev *priv = dev->priv;
126 	struct eth_mac_regs *mac_p = priv->mac_regs_p;
127 	u32 macid_lo, macid_hi;
128 	u8 *mac_id = &dev->enetaddr[0];
129 
130 	macid_lo = mac_id[0] + (mac_id[1] << 8) + \
131 		   (mac_id[2] << 16) + (mac_id[3] << 24);
132 	macid_hi = mac_id[4] + (mac_id[5] << 8);
133 
134 	writel(macid_hi, &mac_p->macaddr0hi);
135 	writel(macid_lo, &mac_p->macaddr0lo);
136 
137 	return 0;
138 }
139 
140 static int dw_eth_init(struct eth_device *dev, bd_t *bis)
141 {
142 	struct dw_eth_dev *priv = dev->priv;
143 	struct eth_mac_regs *mac_p = priv->mac_regs_p;
144 	struct eth_dma_regs *dma_p = priv->dma_regs_p;
145 	u32 conf;
146 
147 	/* Reset ethernet hardware */
148 	if (mac_reset(dev) < 0)
149 		return -1;
150 
151 	writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
152 			&dma_p->busmode);
153 
154 	writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
155 	writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
156 
157 	conf = FRAMEBURSTENABLE | DISABLERXOWN;
158 
159 	if (priv->speed != SPEED_1000M)
160 		conf |= MII_PORTSELECT;
161 
162 	if (priv->duplex == FULL_DUPLEX)
163 		conf |= FULLDPLXMODE;
164 
165 	writel(conf, &mac_p->conf);
166 
167 	descs_init(dev);
168 
169 	/*
170 	 * Start/Enable xfer at dma as well as mac level
171 	 */
172 	writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
173 	writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
174 
175 	writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
176 	writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
177 
178 	return 0;
179 }
180 
181 static int dw_eth_send(struct eth_device *dev, volatile void *packet,
182 		int length)
183 {
184 	struct dw_eth_dev *priv = dev->priv;
185 	struct eth_dma_regs *dma_p = priv->dma_regs_p;
186 	u32 desc_num = priv->tx_currdescnum;
187 	struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
188 
189 	/* Check if the descriptor is owned by CPU */
190 	if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
191 		printf("CPU not owner of tx frame\n");
192 		return -1;
193 	}
194 
195 	memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
196 
197 #if defined(CONFIG_DW_ALTDESCRIPTOR)
198 	desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
199 	desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
200 			       DESC_TXCTRL_SIZE1MASK;
201 
202 	desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
203 	desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
204 #else
205 	desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
206 			       DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
207 			       DESC_TXCTRL_TXFIRST;
208 
209 	desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
210 #endif
211 
212 	/* Test the wrap-around condition. */
213 	if (++desc_num >= CONFIG_TX_DESCR_NUM)
214 		desc_num = 0;
215 
216 	priv->tx_currdescnum = desc_num;
217 
218 	/* Start the transmission */
219 	writel(POLL_DATA, &dma_p->txpolldemand);
220 
221 	return 0;
222 }
223 
224 static int dw_eth_recv(struct eth_device *dev)
225 {
226 	struct dw_eth_dev *priv = dev->priv;
227 	u32 desc_num = priv->rx_currdescnum;
228 	struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
229 
230 	u32 status = desc_p->txrx_status;
231 	int length = 0;
232 
233 	/* Check  if the owner is the CPU */
234 	if (!(status & DESC_RXSTS_OWNBYDMA)) {
235 
236 		length = (status & DESC_RXSTS_FRMLENMSK) >> \
237 			 DESC_RXSTS_FRMLENSHFT;
238 
239 		NetReceive(desc_p->dmamac_addr, length);
240 
241 		/*
242 		 * Make the current descriptor valid again and go to
243 		 * the next one
244 		 */
245 		desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
246 
247 		/* Test the wrap-around condition. */
248 		if (++desc_num >= CONFIG_RX_DESCR_NUM)
249 			desc_num = 0;
250 	}
251 
252 	priv->rx_currdescnum = desc_num;
253 
254 	return length;
255 }
256 
257 static void dw_eth_halt(struct eth_device *dev)
258 {
259 	struct dw_eth_dev *priv = dev->priv;
260 
261 	mac_reset(dev);
262 	priv->tx_currdescnum = priv->rx_currdescnum = 0;
263 }
264 
265 static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
266 {
267 	struct dw_eth_dev *priv = dev->priv;
268 	struct eth_mac_regs *mac_p = priv->mac_regs_p;
269 	u32 miiaddr;
270 	int timeout = CONFIG_MDIO_TIMEOUT;
271 
272 	miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
273 		  ((reg << MIIREGSHIFT) & MII_REGMSK);
274 
275 	writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
276 
277 	do {
278 		if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
279 			*val = readl(&mac_p->miidata);
280 			return 0;
281 		}
282 		udelay(1000);
283 	} while (timeout--);
284 
285 	return -1;
286 }
287 
288 static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
289 {
290 	struct dw_eth_dev *priv = dev->priv;
291 	struct eth_mac_regs *mac_p = priv->mac_regs_p;
292 	u32 miiaddr;
293 	int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
294 	u16 value;
295 
296 	writel(val, &mac_p->miidata);
297 	miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
298 		  ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
299 
300 	writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
301 
302 	do {
303 		if (!(readl(&mac_p->miiaddr) & MII_BUSY))
304 			ret = 0;
305 		udelay(1000);
306 	} while (timeout--);
307 
308 	/* Needed as a fix for ST-Phy */
309 	eth_mdio_read(dev, addr, reg, &value);
310 
311 	return ret;
312 }
313 
314 #if defined(CONFIG_DW_SEARCH_PHY)
315 static int find_phy(struct eth_device *dev)
316 {
317 	int phy_addr = 0;
318 	u16 ctrl, oldctrl;
319 
320 	do {
321 		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
322 		oldctrl = ctrl & BMCR_ANENABLE;
323 
324 		ctrl ^= BMCR_ANENABLE;
325 		eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
326 		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
327 		ctrl &= BMCR_ANENABLE;
328 
329 		if (ctrl == oldctrl) {
330 			phy_addr++;
331 		} else {
332 			ctrl ^= BMCR_ANENABLE;
333 			eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
334 
335 			return phy_addr;
336 		}
337 	} while (phy_addr < 32);
338 
339 	return -1;
340 }
341 #endif
342 
343 static int dw_reset_phy(struct eth_device *dev)
344 {
345 	struct dw_eth_dev *priv = dev->priv;
346 	u16 ctrl;
347 	int timeout = CONFIG_PHYRESET_TIMEOUT;
348 	u32 phy_addr = priv->address;
349 
350 	eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
351 	do {
352 		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
353 		if (!(ctrl & BMCR_RESET))
354 			break;
355 		udelay(1000);
356 	} while (timeout--);
357 
358 	if (timeout < 0)
359 		return -1;
360 
361 #ifdef CONFIG_PHY_RESET_DELAY
362 	udelay(CONFIG_PHY_RESET_DELAY);
363 #endif
364 	return 0;
365 }
366 
367 static int configure_phy(struct eth_device *dev)
368 {
369 	struct dw_eth_dev *priv = dev->priv;
370 	int phy_addr;
371 	u16 bmcr;
372 #if defined(CONFIG_DW_AUTONEG)
373 	u16 bmsr;
374 	u32 timeout;
375 	u16 anlpar, btsr;
376 #else
377 	u16 ctrl;
378 #endif
379 
380 #if defined(CONFIG_DW_SEARCH_PHY)
381 	phy_addr = find_phy(dev);
382 	if (phy_addr > 0)
383 		priv->address = phy_addr;
384 	else
385 		return -1;
386 #else
387 	phy_addr = priv->address;
388 #endif
389 	if (dw_reset_phy(dev) < 0)
390 		return -1;
391 
392 #if defined(CONFIG_DW_AUTONEG)
393 	bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
394 	       BMCR_FULLDPLX | BMCR_SPEED1000;
395 #else
396 	bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
397 
398 #if defined(CONFIG_DW_SPEED10M)
399 	bmcr &= ~BMCR_SPEED100;
400 #endif
401 #if defined(CONFIG_DW_DUPLEXHALF)
402 	bmcr &= ~BMCR_FULLDPLX;
403 #endif
404 #endif
405 	if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
406 		return -1;
407 
408 	/* Read the phy status register and populate priv structure */
409 #if defined(CONFIG_DW_AUTONEG)
410 	timeout = CONFIG_AUTONEG_TIMEOUT;
411 	do {
412 		eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
413 		if (bmsr & BMSR_ANEGCOMPLETE)
414 			break;
415 		udelay(1000);
416 	} while (timeout--);
417 
418 	eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
419 	eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
420 
421 	if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
422 		priv->speed = SPEED_1000M;
423 		if (btsr & PHY_1000BTSR_1000FD)
424 			priv->duplex = FULL_DUPLEX;
425 		else
426 			priv->duplex = HALF_DUPLEX;
427 	} else {
428 		if (anlpar & LPA_100)
429 			priv->speed = SPEED_100M;
430 		else
431 			priv->speed = SPEED_10M;
432 
433 		if (anlpar & (LPA_10FULL | LPA_100FULL))
434 			priv->duplex = FULL_DUPLEX;
435 		else
436 			priv->duplex = HALF_DUPLEX;
437 	}
438 #else
439 	if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
440 		return -1;
441 
442 	if (ctrl & BMCR_FULLDPLX)
443 		priv->duplex = FULL_DUPLEX;
444 	else
445 		priv->duplex = HALF_DUPLEX;
446 
447 	if (ctrl & BMCR_SPEED1000)
448 		priv->speed = SPEED_1000M;
449 	else if (ctrl & BMCR_SPEED100)
450 		priv->speed = SPEED_100M;
451 	else
452 		priv->speed = SPEED_10M;
453 #endif
454 	return 0;
455 }
456 
457 #if defined(CONFIG_MII)
458 static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val)
459 {
460 	struct eth_device *dev;
461 
462 	dev = eth_get_dev_by_name(devname);
463 	if (dev)
464 		eth_mdio_read(dev, addr, reg, val);
465 
466 	return 0;
467 }
468 
469 static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val)
470 {
471 	struct eth_device *dev;
472 
473 	dev = eth_get_dev_by_name(devname);
474 	if (dev)
475 		eth_mdio_write(dev, addr, reg, val);
476 
477 	return 0;
478 }
479 #endif
480 
481 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
482 {
483 	struct eth_device *dev;
484 	struct dw_eth_dev *priv;
485 
486 	dev = (struct eth_device *) malloc(sizeof(struct eth_device));
487 	if (!dev)
488 		return -ENOMEM;
489 
490 	/*
491 	 * Since the priv structure contains the descriptors which need a strict
492 	 * buswidth alignment, memalign is used to allocate memory
493 	 */
494 	priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
495 	if (!priv) {
496 		free(dev);
497 		return -ENOMEM;
498 	}
499 
500 	memset(dev, 0, sizeof(struct eth_device));
501 	memset(priv, 0, sizeof(struct dw_eth_dev));
502 
503 	sprintf(dev->name, "mii%d", id);
504 	dev->iobase = (int)base_addr;
505 	dev->priv = priv;
506 
507 	eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
508 
509 	priv->dev = dev;
510 	priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
511 	priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
512 			DW_DMA_BASE_OFFSET);
513 	priv->address = phy_addr;
514 
515 	if (mac_reset(dev) < 0)
516 		return -1;
517 
518 	if (configure_phy(dev) < 0) {
519 		printf("Phy could not be configured\n");
520 		return -1;
521 	}
522 
523 	dev->init = dw_eth_init;
524 	dev->send = dw_eth_send;
525 	dev->recv = dw_eth_recv;
526 	dev->halt = dw_eth_halt;
527 	dev->write_hwaddr = dw_write_hwaddr;
528 
529 	eth_register(dev);
530 
531 #if defined(CONFIG_MII)
532 	miiphy_register(dev->name, dw_mii_read, dw_mii_write);
533 #endif
534 	return 1;
535 }
536