1 /* 2 * See file CREDITS for list of people who contributed to this 3 * project. 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21 #include <common.h> 22 #include <malloc.h> 23 #include <net.h> 24 #include <netdev.h> 25 #include <pci.h> 26 27 #undef DEBUG_SROM 28 #undef DEBUG_SROM2 29 30 #undef UPDATE_SROM 31 32 /* PCI Registers. 33 */ 34 #define PCI_CFDA_PSM 0x43 35 36 #define CFRV_RN 0x000000f0 /* Revision Number */ 37 38 #define WAKEUP 0x00 /* Power Saving Wakeup */ 39 #define SLEEP 0x80 /* Power Saving Sleep Mode */ 40 41 #define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */ 42 43 /* Ethernet chip registers. 44 */ 45 #define DE4X5_BMR 0x000 /* Bus Mode Register */ 46 #define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */ 47 #define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */ 48 #define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */ 49 #define DE4X5_STS 0x028 /* Status Register */ 50 #define DE4X5_OMR 0x030 /* Operation Mode Register */ 51 #define DE4X5_SICR 0x068 /* SIA Connectivity Register */ 52 #define DE4X5_APROM 0x048 /* Ethernet Address PROM */ 53 54 /* Register bits. 55 */ 56 #define BMR_SWR 0x00000001 /* Software Reset */ 57 #define STS_TS 0x00700000 /* Transmit Process State */ 58 #define STS_RS 0x000e0000 /* Receive Process State */ 59 #define OMR_ST 0x00002000 /* Start/Stop Transmission Command */ 60 #define OMR_SR 0x00000002 /* Start/Stop Receive */ 61 #define OMR_PS 0x00040000 /* Port Select */ 62 #define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */ 63 #define OMR_PM 0x00000080 /* Pass All Multicast */ 64 65 /* Descriptor bits. 66 */ 67 #define R_OWN 0x80000000 /* Own Bit */ 68 #define RD_RER 0x02000000 /* Receive End Of Ring */ 69 #define RD_LS 0x00000100 /* Last Descriptor */ 70 #define RD_ES 0x00008000 /* Error Summary */ 71 #define TD_TER 0x02000000 /* Transmit End Of Ring */ 72 #define T_OWN 0x80000000 /* Own Bit */ 73 #define TD_LS 0x40000000 /* Last Segment */ 74 #define TD_FS 0x20000000 /* First Segment */ 75 #define TD_ES 0x00008000 /* Error Summary */ 76 #define TD_SET 0x08000000 /* Setup Packet */ 77 78 /* The EEPROM commands include the alway-set leading bit. */ 79 #define SROM_WRITE_CMD 5 80 #define SROM_READ_CMD 6 81 #define SROM_ERASE_CMD 7 82 83 #define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */ 84 #define SROM_RD 0x00004000 /* Read from Boot ROM */ 85 #define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ 86 #define EE_WRITE_0 0x4801 87 #define EE_WRITE_1 0x4805 88 #define EE_DATA_READ 0x08 /* EEPROM chip data out. */ 89 #define SROM_SR 0x00000800 /* Select Serial ROM when set */ 90 91 #define DT_IN 0x00000004 /* Serial Data In */ 92 #define DT_CLK 0x00000002 /* Serial ROM Clock */ 93 #define DT_CS 0x00000001 /* Serial ROM Chip Select */ 94 95 #define POLL_DEMAND 1 96 97 #ifdef CONFIG_TULIP_FIX_DAVICOM 98 #define RESET_DM9102(dev) {\ 99 unsigned long i;\ 100 i=INL(dev, 0x0);\ 101 udelay(1000);\ 102 OUTL(dev, i | BMR_SWR, DE4X5_BMR);\ 103 udelay(1000);\ 104 } 105 #else 106 #define RESET_DE4X5(dev) {\ 107 int i;\ 108 i=INL(dev, DE4X5_BMR);\ 109 udelay(1000);\ 110 OUTL(dev, i | BMR_SWR, DE4X5_BMR);\ 111 udelay(1000);\ 112 OUTL(dev, i, DE4X5_BMR);\ 113 udelay(1000);\ 114 for (i=0;i<5;i++) {INL(dev, DE4X5_BMR); udelay(10000);}\ 115 udelay(1000);\ 116 } 117 #endif 118 119 #define START_DE4X5(dev) {\ 120 s32 omr; \ 121 omr = INL(dev, DE4X5_OMR);\ 122 omr |= OMR_ST | OMR_SR;\ 123 OUTL(dev, omr, DE4X5_OMR); /* Enable the TX and/or RX */\ 124 } 125 126 #define STOP_DE4X5(dev) {\ 127 s32 omr; \ 128 omr = INL(dev, DE4X5_OMR);\ 129 omr &= ~(OMR_ST|OMR_SR);\ 130 OUTL(dev, omr, DE4X5_OMR); /* Disable the TX and/or RX */ \ 131 } 132 133 #define NUM_RX_DESC PKTBUFSRX 134 #ifndef CONFIG_TULIP_FIX_DAVICOM 135 #define NUM_TX_DESC 1 /* Number of TX descriptors */ 136 #else 137 #define NUM_TX_DESC 4 138 #endif 139 #define RX_BUFF_SZ PKTSIZE_ALIGN 140 141 #define TOUT_LOOP 1000000 142 143 #define SETUP_FRAME_LEN 192 144 #define ETH_ALEN 6 145 146 struct de4x5_desc { 147 volatile s32 status; 148 u32 des1; 149 u32 buf; 150 u32 next; 151 }; 152 153 static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(32))); /* RX descriptor ring */ 154 static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(32))); /* TX descriptor ring */ 155 static int rx_new; /* RX descriptor ring pointer */ 156 static int tx_new; /* TX descriptor ring pointer */ 157 158 static char rxRingSize; 159 static char txRingSize; 160 161 #if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM) 162 static void sendto_srom(struct eth_device* dev, u_int command, u_long addr); 163 static int getfrom_srom(struct eth_device* dev, u_long addr); 164 static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr,int cmd,int cmd_len); 165 static int do_read_eeprom(struct eth_device *dev,u_long ioaddr,int location,int addr_len); 166 #endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */ 167 #ifdef UPDATE_SROM 168 static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value); 169 static void update_srom(struct eth_device *dev, bd_t *bis); 170 #endif 171 #ifndef CONFIG_TULIP_FIX_DAVICOM 172 static int read_srom(struct eth_device *dev, u_long ioaddr, int index); 173 static void read_hw_addr(struct eth_device* dev, bd_t * bis); 174 #endif /* CONFIG_TULIP_FIX_DAVICOM */ 175 static void send_setup_frame(struct eth_device* dev, bd_t * bis); 176 177 static int dc21x4x_init(struct eth_device* dev, bd_t* bis); 178 static int dc21x4x_send(struct eth_device *dev, void *packet, int length); 179 static int dc21x4x_recv(struct eth_device* dev); 180 static void dc21x4x_halt(struct eth_device* dev); 181 #ifdef CONFIG_TULIP_SELECT_MEDIA 182 extern void dc21x4x_select_media(struct eth_device* dev); 183 #endif 184 185 #if defined(CONFIG_E500) 186 #define phys_to_bus(a) (a) 187 #else 188 #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) 189 #endif 190 191 static int INL(struct eth_device* dev, u_long addr) 192 { 193 return le32_to_cpu(*(volatile u_long *)(addr + dev->iobase)); 194 } 195 196 static void OUTL(struct eth_device* dev, int command, u_long addr) 197 { 198 *(volatile u_long *)(addr + dev->iobase) = cpu_to_le32(command); 199 } 200 201 static struct pci_device_id supported[] = { 202 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST }, 203 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142 }, 204 #ifdef CONFIG_TULIP_FIX_DAVICOM 205 { PCI_VENDOR_ID_DAVICOM, PCI_DEVICE_ID_DAVICOM_DM9102A }, 206 #endif 207 { } 208 }; 209 210 int dc21x4x_initialize(bd_t *bis) 211 { 212 int idx=0; 213 int card_number = 0; 214 unsigned int cfrv; 215 unsigned char timer; 216 pci_dev_t devbusfn; 217 unsigned int iobase; 218 unsigned short status; 219 struct eth_device* dev; 220 221 while(1) { 222 devbusfn = pci_find_devices(supported, idx++); 223 if (devbusfn == -1) { 224 break; 225 } 226 227 /* Get the chip configuration revision register. */ 228 pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv); 229 230 #ifndef CONFIG_TULIP_FIX_DAVICOM 231 if ((cfrv & CFRV_RN) < DC2114x_BRK ) { 232 printf("Error: The chip is not DC21143.\n"); 233 continue; 234 } 235 #endif 236 237 pci_read_config_word(devbusfn, PCI_COMMAND, &status); 238 status |= 239 #ifdef CONFIG_TULIP_USE_IO 240 PCI_COMMAND_IO | 241 #else 242 PCI_COMMAND_MEMORY | 243 #endif 244 PCI_COMMAND_MASTER; 245 pci_write_config_word(devbusfn, PCI_COMMAND, status); 246 247 pci_read_config_word(devbusfn, PCI_COMMAND, &status); 248 #ifdef CONFIG_TULIP_USE_IO 249 if (!(status & PCI_COMMAND_IO)) { 250 printf("Error: Can not enable I/O access.\n"); 251 continue; 252 } 253 #else 254 if (!(status & PCI_COMMAND_MEMORY)) { 255 printf("Error: Can not enable MEMORY access.\n"); 256 continue; 257 } 258 #endif 259 260 if (!(status & PCI_COMMAND_MASTER)) { 261 printf("Error: Can not enable Bus Mastering.\n"); 262 continue; 263 } 264 265 /* Check the latency timer for values >= 0x60. */ 266 pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer); 267 268 if (timer < 0x60) { 269 pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x60); 270 } 271 272 #ifdef CONFIG_TULIP_USE_IO 273 /* read BAR for memory space access */ 274 pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase); 275 iobase &= PCI_BASE_ADDRESS_IO_MASK; 276 #else 277 /* read BAR for memory space access */ 278 pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase); 279 iobase &= PCI_BASE_ADDRESS_MEM_MASK; 280 #endif 281 debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase); 282 283 dev = (struct eth_device*) malloc(sizeof *dev); 284 285 if (!dev) { 286 printf("Can not allocalte memory of dc21x4x\n"); 287 break; 288 } 289 memset(dev, 0, sizeof(*dev)); 290 291 #ifdef CONFIG_TULIP_FIX_DAVICOM 292 sprintf(dev->name, "Davicom#%d", card_number); 293 #else 294 sprintf(dev->name, "dc21x4x#%d", card_number); 295 #endif 296 297 #ifdef CONFIG_TULIP_USE_IO 298 dev->iobase = pci_io_to_phys(devbusfn, iobase); 299 #else 300 dev->iobase = pci_mem_to_phys(devbusfn, iobase); 301 #endif 302 dev->priv = (void*) devbusfn; 303 dev->init = dc21x4x_init; 304 dev->halt = dc21x4x_halt; 305 dev->send = dc21x4x_send; 306 dev->recv = dc21x4x_recv; 307 308 /* Ensure we're not sleeping. */ 309 pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); 310 311 udelay(10 * 1000); 312 313 #ifndef CONFIG_TULIP_FIX_DAVICOM 314 read_hw_addr(dev, bis); 315 #endif 316 eth_register(dev); 317 318 card_number++; 319 } 320 321 return card_number; 322 } 323 324 static int dc21x4x_init(struct eth_device* dev, bd_t* bis) 325 { 326 int i; 327 int devbusfn = (int) dev->priv; 328 329 /* Ensure we're not sleeping. */ 330 pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); 331 332 #ifdef CONFIG_TULIP_FIX_DAVICOM 333 RESET_DM9102(dev); 334 #else 335 RESET_DE4X5(dev); 336 #endif 337 338 if ((INL(dev, DE4X5_STS) & (STS_TS | STS_RS)) != 0) { 339 printf("Error: Cannot reset ethernet controller.\n"); 340 return -1; 341 } 342 343 #ifdef CONFIG_TULIP_SELECT_MEDIA 344 dc21x4x_select_media(dev); 345 #else 346 OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); 347 #endif 348 349 for (i = 0; i < NUM_RX_DESC; i++) { 350 rx_ring[i].status = cpu_to_le32(R_OWN); 351 rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); 352 rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32) NetRxPackets[i])); 353 #ifdef CONFIG_TULIP_FIX_DAVICOM 354 rx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &rx_ring[(i+1) % NUM_RX_DESC])); 355 #else 356 rx_ring[i].next = 0; 357 #endif 358 } 359 360 for (i=0; i < NUM_TX_DESC; i++) { 361 tx_ring[i].status = 0; 362 tx_ring[i].des1 = 0; 363 tx_ring[i].buf = 0; 364 365 #ifdef CONFIG_TULIP_FIX_DAVICOM 366 tx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &tx_ring[(i+1) % NUM_TX_DESC])); 367 #else 368 tx_ring[i].next = 0; 369 #endif 370 } 371 372 rxRingSize = NUM_RX_DESC; 373 txRingSize = NUM_TX_DESC; 374 375 /* Write the end of list marker to the descriptor lists. */ 376 rx_ring[rxRingSize - 1].des1 |= cpu_to_le32(RD_RER); 377 tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER); 378 379 /* Tell the adapter where the TX/RX rings are located. */ 380 OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA); 381 OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA); 382 383 START_DE4X5(dev); 384 385 tx_new = 0; 386 rx_new = 0; 387 388 send_setup_frame(dev, bis); 389 390 return 0; 391 } 392 393 static int dc21x4x_send(struct eth_device *dev, void *packet, int length) 394 { 395 int status = -1; 396 int i; 397 398 if (length <= 0) { 399 printf("%s: bad packet size: %d\n", dev->name, length); 400 goto Done; 401 } 402 403 for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { 404 if (i >= TOUT_LOOP) { 405 printf("%s: tx error buffer not ready\n", dev->name); 406 goto Done; 407 } 408 } 409 410 tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) packet)); 411 tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length); 412 tx_ring[tx_new].status = cpu_to_le32(T_OWN); 413 414 OUTL(dev, POLL_DEMAND, DE4X5_TPD); 415 416 for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { 417 if (i >= TOUT_LOOP) { 418 printf(".%s: tx buffer not ready\n", dev->name); 419 goto Done; 420 } 421 } 422 423 if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) { 424 #if 0 /* test-only */ 425 printf("TX error status = 0x%08X\n", 426 le32_to_cpu(tx_ring[tx_new].status)); 427 #endif 428 tx_ring[tx_new].status = 0x0; 429 goto Done; 430 } 431 432 status = length; 433 434 Done: 435 tx_new = (tx_new+1) % NUM_TX_DESC; 436 return status; 437 } 438 439 static int dc21x4x_recv(struct eth_device* dev) 440 { 441 s32 status; 442 int length = 0; 443 444 for ( ; ; ) { 445 status = (s32)le32_to_cpu(rx_ring[rx_new].status); 446 447 if (status & R_OWN) { 448 break; 449 } 450 451 if (status & RD_LS) { 452 /* Valid frame status. 453 */ 454 if (status & RD_ES) { 455 456 /* There was an error. 457 */ 458 printf("RX error status = 0x%08X\n", status); 459 } else { 460 /* A valid frame received. 461 */ 462 length = (le32_to_cpu(rx_ring[rx_new].status) >> 16); 463 464 /* Pass the packet up to the protocol 465 * layers. 466 */ 467 NetReceive(NetRxPackets[rx_new], length - 4); 468 } 469 470 /* Change buffer ownership for this frame, back 471 * to the adapter. 472 */ 473 rx_ring[rx_new].status = cpu_to_le32(R_OWN); 474 } 475 476 /* Update entry information. 477 */ 478 rx_new = (rx_new + 1) % rxRingSize; 479 } 480 481 return length; 482 } 483 484 static void dc21x4x_halt(struct eth_device* dev) 485 { 486 int devbusfn = (int) dev->priv; 487 488 STOP_DE4X5(dev); 489 OUTL(dev, 0, DE4X5_SICR); 490 491 pci_write_config_byte(devbusfn, PCI_CFDA_PSM, SLEEP); 492 } 493 494 static void send_setup_frame(struct eth_device* dev, bd_t *bis) 495 { 496 int i; 497 char setup_frame[SETUP_FRAME_LEN]; 498 char *pa = &setup_frame[0]; 499 500 memset(pa, 0xff, SETUP_FRAME_LEN); 501 502 for (i = 0; i < ETH_ALEN; i++) { 503 *(pa + (i & 1)) = dev->enetaddr[i]; 504 if (i & 0x01) { 505 pa += 4; 506 } 507 } 508 509 for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { 510 if (i >= TOUT_LOOP) { 511 printf("%s: tx error buffer not ready\n", dev->name); 512 goto Done; 513 } 514 } 515 516 tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) &setup_frame[0])); 517 tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_SET| SETUP_FRAME_LEN); 518 tx_ring[tx_new].status = cpu_to_le32(T_OWN); 519 520 OUTL(dev, POLL_DEMAND, DE4X5_TPD); 521 522 for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { 523 if (i >= TOUT_LOOP) { 524 printf("%s: tx buffer not ready\n", dev->name); 525 goto Done; 526 } 527 } 528 529 if (le32_to_cpu(tx_ring[tx_new].status) != 0x7FFFFFFF) { 530 printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[tx_new].status)); 531 } 532 tx_new = (tx_new+1) % NUM_TX_DESC; 533 534 Done: 535 return; 536 } 537 538 #if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM) 539 /* SROM Read and write routines. 540 */ 541 static void 542 sendto_srom(struct eth_device* dev, u_int command, u_long addr) 543 { 544 OUTL(dev, command, addr); 545 udelay(1); 546 } 547 548 static int 549 getfrom_srom(struct eth_device* dev, u_long addr) 550 { 551 s32 tmp; 552 553 tmp = INL(dev, addr); 554 udelay(1); 555 556 return tmp; 557 } 558 559 /* Note: this routine returns extra data bits for size detection. */ 560 static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location, int addr_len) 561 { 562 int i; 563 unsigned retval = 0; 564 int read_cmd = location | (SROM_READ_CMD << addr_len); 565 566 sendto_srom(dev, SROM_RD | SROM_SR, ioaddr); 567 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr); 568 569 #ifdef DEBUG_SROM 570 printf(" EEPROM read at %d ", location); 571 #endif 572 573 /* Shift the read command bits out. */ 574 for (i = 4 + addr_len; i >= 0; i--) { 575 short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; 576 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval, ioaddr); 577 udelay(10); 578 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK, ioaddr); 579 udelay(10); 580 #ifdef DEBUG_SROM2 581 printf("%X", getfrom_srom(dev, ioaddr) & 15); 582 #endif 583 retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0); 584 } 585 586 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr); 587 588 #ifdef DEBUG_SROM2 589 printf(" :%X:", getfrom_srom(dev, ioaddr) & 15); 590 #endif 591 592 for (i = 16; i > 0; i--) { 593 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr); 594 udelay(10); 595 #ifdef DEBUG_SROM2 596 printf("%X", getfrom_srom(dev, ioaddr) & 15); 597 #endif 598 retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0); 599 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr); 600 udelay(10); 601 } 602 603 /* Terminate the EEPROM access. */ 604 sendto_srom(dev, SROM_RD | SROM_SR, ioaddr); 605 606 #ifdef DEBUG_SROM2 607 printf(" EEPROM value at %d is %5.5x.\n", location, retval); 608 #endif 609 610 return retval; 611 } 612 #endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */ 613 614 /* This executes a generic EEPROM command, typically a write or write 615 * enable. It returns the data output from the EEPROM, and thus may 616 * also be used for reads. 617 */ 618 #if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM) 619 static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int cmd_len) 620 { 621 unsigned retval = 0; 622 623 #ifdef DEBUG_SROM 624 printf(" EEPROM op 0x%x: ", cmd); 625 #endif 626 627 sendto_srom(dev,SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr); 628 629 /* Shift the command bits out. */ 630 do { 631 short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0; 632 sendto_srom(dev,dataval, ioaddr); 633 udelay(10); 634 635 #ifdef DEBUG_SROM2 636 printf("%X", getfrom_srom(dev,ioaddr) & 15); 637 #endif 638 639 sendto_srom(dev,dataval | DT_CLK, ioaddr); 640 udelay(10); 641 retval = (retval << 1) | ((getfrom_srom(dev,ioaddr) & EE_DATA_READ) ? 1 : 0); 642 } while (--cmd_len >= 0); 643 sendto_srom(dev,SROM_RD | SROM_SR | DT_CS, ioaddr); 644 645 /* Terminate the EEPROM access. */ 646 sendto_srom(dev,SROM_RD | SROM_SR, ioaddr); 647 648 #ifdef DEBUG_SROM 649 printf(" EEPROM result is 0x%5.5x.\n", retval); 650 #endif 651 652 return retval; 653 } 654 #endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */ 655 656 #ifndef CONFIG_TULIP_FIX_DAVICOM 657 static int read_srom(struct eth_device *dev, u_long ioaddr, int index) 658 { 659 int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6; 660 661 return do_eeprom_cmd(dev, ioaddr, 662 (((SROM_READ_CMD << ee_addr_size) | index) << 16) 663 | 0xffff, 3 + ee_addr_size + 16); 664 } 665 #endif /* CONFIG_TULIP_FIX_DAVICOM */ 666 667 #ifdef UPDATE_SROM 668 static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value) 669 { 670 int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6; 671 int i; 672 unsigned short newval; 673 674 udelay(10*1000); /* test-only */ 675 676 #ifdef DEBUG_SROM 677 printf("ee_addr_size=%d.\n", ee_addr_size); 678 printf("Writing new entry 0x%4.4x to offset %d.\n", new_value, index); 679 #endif 680 681 /* Enable programming modes. */ 682 do_eeprom_cmd(dev, ioaddr, (0x4f << (ee_addr_size-4)), 3+ee_addr_size); 683 684 /* Do the actual write. */ 685 do_eeprom_cmd(dev, ioaddr, 686 (((SROM_WRITE_CMD<<ee_addr_size)|index) << 16) | new_value, 687 3 + ee_addr_size + 16); 688 689 /* Poll for write finished. */ 690 sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr); 691 for (i = 0; i < 10000; i++) /* Typical 2000 ticks */ 692 if (getfrom_srom(dev, ioaddr) & EE_DATA_READ) 693 break; 694 695 #ifdef DEBUG_SROM 696 printf(" Write finished after %d ticks.\n", i); 697 #endif 698 699 /* Disable programming. */ 700 do_eeprom_cmd(dev, ioaddr, (0x40 << (ee_addr_size-4)), 3 + ee_addr_size); 701 702 /* And read the result. */ 703 newval = do_eeprom_cmd(dev, ioaddr, 704 (((SROM_READ_CMD<<ee_addr_size)|index) << 16) 705 | 0xffff, 3 + ee_addr_size + 16); 706 #ifdef DEBUG_SROM 707 printf(" New value at offset %d is %4.4x.\n", index, newval); 708 #endif 709 return 1; 710 } 711 #endif 712 713 #ifndef CONFIG_TULIP_FIX_DAVICOM 714 static void read_hw_addr(struct eth_device *dev, bd_t *bis) 715 { 716 u_short tmp, *p = (u_short *)(&dev->enetaddr[0]); 717 int i, j = 0; 718 719 for (i = 0; i < (ETH_ALEN >> 1); i++) { 720 tmp = read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1) + i)); 721 *p = le16_to_cpu(tmp); 722 j += *p++; 723 } 724 725 if ((j == 0) || (j == 0x2fffd)) { 726 memset (dev->enetaddr, 0, ETH_ALEN); 727 debug ("Warning: can't read HW address from SROM.\n"); 728 goto Done; 729 } 730 731 return; 732 733 Done: 734 #ifdef UPDATE_SROM 735 update_srom(dev, bis); 736 #endif 737 return; 738 } 739 #endif /* CONFIG_TULIP_FIX_DAVICOM */ 740 741 #ifdef UPDATE_SROM 742 static void update_srom(struct eth_device *dev, bd_t *bis) 743 { 744 int i; 745 static unsigned short eeprom[0x40] = { 746 0x140b, 0x6610, 0x0000, 0x0000, /* 00 */ 747 0x0000, 0x0000, 0x0000, 0x0000, /* 04 */ 748 0x00a3, 0x0103, 0x0000, 0x0000, /* 08 */ 749 0x0000, 0x1f00, 0x0000, 0x0000, /* 0c */ 750 0x0108, 0x038d, 0x0000, 0x0000, /* 10 */ 751 0xe078, 0x0001, 0x0040, 0x0018, /* 14 */ 752 0x0000, 0x0000, 0x0000, 0x0000, /* 18 */ 753 0x0000, 0x0000, 0x0000, 0x0000, /* 1c */ 754 0x0000, 0x0000, 0x0000, 0x0000, /* 20 */ 755 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */ 756 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */ 757 0x0000, 0x0000, 0x0000, 0x0000, /* 2c */ 758 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ 759 0x0000, 0x0000, 0x0000, 0x0000, /* 34 */ 760 0x0000, 0x0000, 0x0000, 0x0000, /* 38 */ 761 0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */ 762 }; 763 uchar enetaddr[6]; 764 765 /* Ethernet Addr... */ 766 if (!eth_getenv_enetaddr("ethaddr", enetaddr)) 767 return; 768 eeprom[0x0a] = (enetaddr[1] << 8) | enetaddr[0]; 769 eeprom[0x0b] = (enetaddr[3] << 8) | enetaddr[2]; 770 eeprom[0x0c] = (enetaddr[5] << 8) | enetaddr[4]; 771 772 for (i=0; i<0x40; i++) { 773 write_srom(dev, DE4X5_APROM, i, eeprom[i]); 774 } 775 } 776 #endif /* UPDATE_SROM */ 777