xref: /openbmc/u-boot/drivers/mtd/stm32_flash.c (revision 523849a0)
1 /*
2  * (C) Copyright 2015
3  * Kamil Lulko, <kamil.lulko@gmail.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/stm32.h>
11 #include "stm32_flash.h"
12 
13 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
14 
15 #define STM32_FLASH		((struct stm32_flash_regs *)FLASH_CNTL_BASE)
16 
17 void stm32_flash_latency_cfg(int latency)
18 {
19 	/* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */
20 	writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN
21 		| FLASH_ACR_DCEN, &STM32_FLASH->acr);
22 }
23 
24 static void stm32_flash_lock(u8 lock)
25 {
26 	if (lock) {
27 		setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK);
28 	} else {
29 		writel(STM32_FLASH_KEY1, &STM32_FLASH->key);
30 		writel(STM32_FLASH_KEY2, &STM32_FLASH->key);
31 	}
32 }
33 
34 unsigned long flash_init(void)
35 {
36 	unsigned long total_size = 0;
37 	u8 i, j;
38 
39 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
40 		flash_info[i].flash_id = FLASH_STM32;
41 		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
42 		flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 20);
43 		flash_info[i].size = sect_sz_kb[0];
44 		for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) {
45 			flash_info[i].start[j] = flash_info[i].start[j - 1]
46 				+ (sect_sz_kb[j - 1]);
47 			flash_info[i].size += sect_sz_kb[j];
48 		}
49 		total_size += flash_info[i].size;
50 	}
51 
52 	return total_size;
53 }
54 
55 void flash_print_info(flash_info_t *info)
56 {
57 	int i;
58 
59 	if (info->flash_id == FLASH_UNKNOWN) {
60 		printf("missing or unknown FLASH type\n");
61 		return;
62 	} else if (info->flash_id == FLASH_STM32) {
63 		printf("stm32 Embedded Flash\n");
64 	}
65 
66 	printf("  Size: %ld MB in %d Sectors\n",
67 	       info->size >> 20, info->sector_count);
68 
69 	printf("  Sector Start Addresses:");
70 	for (i = 0; i < info->sector_count; ++i) {
71 		if ((i % 5) == 0)
72 			printf("\n   ");
73 		printf(" %08lX%s",
74 		       info->start[i],
75 			info->protect[i] ? " (RO)" : "     ");
76 	}
77 	printf("\n");
78 	return;
79 }
80 
81 int flash_erase(flash_info_t *info, int first, int last)
82 {
83 	u8 bank = 0xFF;
84 	int i;
85 
86 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
87 		if (info == &flash_info[i]) {
88 			bank = i;
89 			break;
90 		}
91 	}
92 	if (bank == 0xFF)
93 		return -1;
94 
95 	stm32_flash_lock(0);
96 
97 	for (i = first; i <= last; i++) {
98 		while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
99 			;
100 
101 		/* clear old sector number before writing a new one */
102 		clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SNB_MASK);
103 
104 		if (bank == 0) {
105 			setbits_le32(&STM32_FLASH->cr,
106 				     (i << STM32_FLASH_CR_SNB_OFFSET));
107 		} else if (bank == 1) {
108 			setbits_le32(&STM32_FLASH->cr,
109 				     ((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET));
110 		} else {
111 			stm32_flash_lock(1);
112 			return -1;
113 		}
114 		setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER);
115 		setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT);
116 
117 		while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
118 			;
119 
120 		clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER);
121 	}
122 
123 	stm32_flash_lock(1);
124 	return 0;
125 }
126 
127 int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
128 {
129 	ulong i;
130 
131 	while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
132 		;
133 
134 	stm32_flash_lock(0);
135 
136 	setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG);
137 	/* To make things simple use byte writes only */
138 	for (i = 0; i < cnt; i++) {
139 		*(uchar *)(addr + i) = src[i];
140 		while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
141 			;
142 	}
143 	clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG);
144 	stm32_flash_lock(1);
145 
146 	return 0;
147 }
148