1 /* 2 * SPI flash internal definitions 3 * 4 * Copyright (C) 2008 Atmel Corporation 5 * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _SF_INTERNAL_H_ 11 #define _SF_INTERNAL_H_ 12 13 #include <linux/types.h> 14 #include <linux/compiler.h> 15 16 /* Dual SPI flash memories - see SPI_COMM_DUAL_... */ 17 enum spi_dual_flash { 18 SF_SINGLE_FLASH = 0, 19 SF_DUAL_STACKED_FLASH = 1 << 0, 20 SF_DUAL_PARALLEL_FLASH = 1 << 1, 21 }; 22 23 /* Enum list - Full read commands */ 24 enum spi_read_cmds { 25 ARRAY_SLOW = 1 << 0, 26 ARRAY_FAST = 1 << 1, 27 DUAL_OUTPUT_FAST = 1 << 2, 28 DUAL_IO_FAST = 1 << 3, 29 QUAD_OUTPUT_FAST = 1 << 4, 30 QUAD_IO_FAST = 1 << 5, 31 }; 32 33 /* Normal - Extended - Full command set */ 34 #define RD_NORM (ARRAY_SLOW | ARRAY_FAST) 35 #define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST) 36 #define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST) 37 38 /* sf param flags */ 39 enum { 40 SECT_4K = 1 << 0, 41 SECT_32K = 1 << 1, 42 E_FSR = 1 << 2, 43 SST_BP = 1 << 3, 44 SST_WP = 1 << 4, 45 WR_QPP = 1 << 5, 46 }; 47 48 #define SST_WR (SST_BP | SST_WP) 49 50 #define SPI_FLASH_3B_ADDR_LEN 3 51 #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) 52 #define SPI_FLASH_16MB_BOUN 0x1000000 53 54 /* CFI Manufacture ID's */ 55 #define SPI_FLASH_CFI_MFR_SPANSION 0x01 56 #define SPI_FLASH_CFI_MFR_STMICRO 0x20 57 #define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 58 #define SPI_FLASH_CFI_MFR_WINBOND 0xef 59 60 /* Erase commands */ 61 #define CMD_ERASE_4K 0x20 62 #define CMD_ERASE_32K 0x52 63 #define CMD_ERASE_CHIP 0xc7 64 #define CMD_ERASE_64K 0xd8 65 66 /* Write commands */ 67 #define CMD_WRITE_STATUS 0x01 68 #define CMD_PAGE_PROGRAM 0x02 69 #define CMD_WRITE_DISABLE 0x04 70 #define CMD_READ_STATUS 0x05 71 #define CMD_QUAD_PAGE_PROGRAM 0x32 72 #define CMD_READ_STATUS1 0x35 73 #define CMD_WRITE_ENABLE 0x06 74 #define CMD_READ_CONFIG 0x35 75 #define CMD_FLAG_STATUS 0x70 76 77 /* Read commands */ 78 #define CMD_READ_ARRAY_SLOW 0x03 79 #define CMD_READ_ARRAY_FAST 0x0b 80 #define CMD_READ_DUAL_OUTPUT_FAST 0x3b 81 #define CMD_READ_DUAL_IO_FAST 0xbb 82 #define CMD_READ_QUAD_OUTPUT_FAST 0x6b 83 #define CMD_READ_QUAD_IO_FAST 0xeb 84 #define CMD_READ_ID 0x9f 85 86 /* Bank addr access commands */ 87 #ifdef CONFIG_SPI_FLASH_BAR 88 # define CMD_BANKADDR_BRWR 0x17 89 # define CMD_BANKADDR_BRRD 0x16 90 # define CMD_EXTNADDR_WREAR 0xC5 91 # define CMD_EXTNADDR_RDEAR 0xC8 92 #endif 93 94 /* Common status */ 95 #define STATUS_WIP (1 << 0) 96 #define STATUS_QEB_WINSPAN (1 << 1) 97 #define STATUS_QEB_MXIC (1 << 6) 98 #define STATUS_PEC (1 << 7) 99 100 #ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 101 #define STATUS_SRWD (1 << 7) /* SR write protect */ 102 #endif 103 104 /* Flash timeout values */ 105 #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) 106 #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) 107 #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) 108 109 /* SST specific */ 110 #ifdef CONFIG_SPI_FLASH_SST 111 # define CMD_SST_BP 0x02 /* Byte Program */ 112 # define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ 113 114 int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, 115 const void *buf); 116 int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, 117 const void *buf); 118 #endif 119 120 /** 121 * struct spi_flash_params - SPI/QSPI flash device params structure 122 * 123 * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) 124 * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) 125 * @ext_jedec: Device ext_jedec ID 126 * @sector_size: Sector size of this device 127 * @nr_sectors: No.of sectors on this device 128 * @e_rd_cmd: Enum list for read commands 129 * @flags: Important param, for flash specific behaviour 130 */ 131 struct spi_flash_params { 132 const char *name; 133 u32 jedec; 134 u16 ext_jedec; 135 u32 sector_size; 136 u32 nr_sectors; 137 u8 e_rd_cmd; 138 u16 flags; 139 }; 140 141 extern const struct spi_flash_params spi_flash_params_table[]; 142 143 /* Send a single-byte command to the device and read the response */ 144 int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); 145 146 /* 147 * Send a multi-byte command to the device and read the response. Used 148 * for flash array reads, etc. 149 */ 150 int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, 151 size_t cmd_len, void *data, size_t data_len); 152 153 /* 154 * Send a multi-byte command to the device followed by (optional) 155 * data. Used for programming the flash array, etc. 156 */ 157 int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, 158 const void *data, size_t data_len); 159 160 161 /* Flash erase(sectors) operation, support all possible erase commands */ 162 int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); 163 164 /* Read the status register */ 165 int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs); 166 167 /* Program the status register */ 168 int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws); 169 170 /* Read the config register */ 171 int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc); 172 173 /* Program the config register */ 174 int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc); 175 176 /* Enable writing on the SPI flash */ 177 static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) 178 { 179 return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); 180 } 181 182 /* Disable writing on the SPI flash */ 183 static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) 184 { 185 return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0); 186 } 187 188 /* 189 * Send the read status command to the device and wait for the wip 190 * (write-in-progress) bit to clear itself. 191 */ 192 int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); 193 194 /* 195 * Used for spi_flash write operation 196 * - SPI claim 197 * - spi_flash_cmd_write_enable 198 * - spi_flash_cmd_write 199 * - spi_flash_cmd_wait_ready 200 * - SPI release 201 */ 202 int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, 203 size_t cmd_len, const void *buf, size_t buf_len); 204 205 /* 206 * Flash write operation, support all possible write commands. 207 * Write the requested data out breaking it up into multiple write 208 * commands as needed per the write size. 209 */ 210 int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, 211 size_t len, const void *buf); 212 213 /* 214 * Same as spi_flash_cmd_read() except it also claims/releases the SPI 215 * bus. Used as common part of the ->read() operation. 216 */ 217 int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, 218 size_t cmd_len, void *data, size_t data_len); 219 220 /* Flash read operation, support all possible read commands */ 221 int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, 222 size_t len, void *data); 223 224 #endif /* _SF_INTERNAL_H_ */ 225