xref: /openbmc/u-boot/drivers/mtd/pic32_flash.c (revision 8ee59472)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2015
4  * Cristian Birsan <cristian.birsan@microchip.com>
5  * Purna Chandra Mandal <purna.mandal@microchip.com>
6  */
7 
8 #include <common.h>
9 #include <dm.h>
10 #include <fdt_support.h>
11 #include <flash.h>
12 #include <mach/pic32.h>
13 #include <wait_bit.h>
14 
15 DECLARE_GLOBAL_DATA_PTR;
16 
17 /* NVM Controller registers */
18 struct pic32_reg_nvm {
19 	struct pic32_reg_atomic ctrl;
20 	struct pic32_reg_atomic key;
21 	struct pic32_reg_atomic addr;
22 	struct pic32_reg_atomic data;
23 };
24 
25 /* NVM operations */
26 #define NVMOP_NOP		0
27 #define NVMOP_WORD_WRITE	1
28 #define NVMOP_PAGE_ERASE	4
29 
30 /* NVM control bits */
31 #define NVM_WR			BIT(15)
32 #define NVM_WREN		BIT(14)
33 #define NVM_WRERR		BIT(13)
34 #define NVM_LVDERR		BIT(12)
35 
36 /* NVM programming unlock register */
37 #define LOCK_KEY		0x0
38 #define UNLOCK_KEY1		0xaa996655
39 #define UNLOCK_KEY2		0x556699aa
40 
41 /*
42  * PIC32 flash banks consist of number of pages, each page
43  * into number of rows and rows into number of words.
44  * Here we will maintain page information instead of sector.
45  */
46 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
47 static struct pic32_reg_nvm *nvm_regs_p;
48 
49 static inline void flash_initiate_operation(u32 nvmop)
50 {
51 	/* set operation */
52 	writel(nvmop, &nvm_regs_p->ctrl.raw);
53 
54 	/* enable flash write */
55 	writel(NVM_WREN, &nvm_regs_p->ctrl.set);
56 
57 	/* unlock sequence */
58 	writel(LOCK_KEY, &nvm_regs_p->key.raw);
59 	writel(UNLOCK_KEY1, &nvm_regs_p->key.raw);
60 	writel(UNLOCK_KEY2, &nvm_regs_p->key.raw);
61 
62 	/* initiate operation */
63 	writel(NVM_WR, &nvm_regs_p->ctrl.set);
64 }
65 
66 static int flash_wait_till_busy(const char *func, ulong timeout)
67 {
68 	int ret = wait_for_bit_le32(&nvm_regs_p->ctrl.raw,
69 				    NVM_WR, false, timeout, false);
70 
71 	return ret ? ERR_TIMEOUT : ERR_OK;
72 }
73 
74 static inline int flash_complete_operation(void)
75 {
76 	u32 tmp;
77 
78 	tmp = readl(&nvm_regs_p->ctrl.raw);
79 	if (tmp & NVM_WRERR) {
80 		printf("Error in Block Erase - Lock Bit may be set!\n");
81 		flash_initiate_operation(NVMOP_NOP);
82 		return ERR_PROTECTED;
83 	}
84 
85 	if (tmp & NVM_LVDERR) {
86 		printf("Error in Block Erase - low-vol detected!\n");
87 		flash_initiate_operation(NVMOP_NOP);
88 		return ERR_NOT_ERASED;
89 	}
90 
91 	/* disable flash write or erase operation */
92 	writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
93 
94 	return ERR_OK;
95 }
96 
97 /*
98  * Erase flash sectors, returns:
99  * ERR_OK - OK
100  * ERR_INVAL - invalid sector arguments
101  * ERR_TIMEOUT - write timeout
102  * ERR_NOT_ERASED - Flash not erased
103  * ERR_UNKNOWN_FLASH_VENDOR - incorrect flash
104  */
105 int flash_erase(flash_info_t *info, int s_first, int s_last)
106 {
107 	ulong sect_start, sect_end, flags;
108 	int prot, sect;
109 	int rc;
110 
111 	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MCHP) {
112 		printf("Can't erase unknown flash type %08lx - aborted\n",
113 		       info->flash_id);
114 		return ERR_UNKNOWN_FLASH_VENDOR;
115 	}
116 
117 	if ((s_first < 0) || (s_first > s_last)) {
118 		printf("- no sectors to erase\n");
119 		return ERR_INVAL;
120 	}
121 
122 	prot = 0;
123 	for (sect = s_first; sect <= s_last; ++sect) {
124 		if (info->protect[sect])
125 			prot++;
126 	}
127 
128 	if (prot)
129 		printf("- Warning: %d protected sectors will not be erased!\n",
130 		       prot);
131 	else
132 		printf("\n");
133 
134 	/* erase on unprotected sectors */
135 	for (sect = s_first; sect <= s_last; sect++) {
136 		if (info->protect[sect])
137 			continue;
138 
139 		/* disable interrupts */
140 		flags = disable_interrupts();
141 
142 		/* write destination page address (physical) */
143 		sect_start = CPHYSADDR(info->start[sect]);
144 		writel(sect_start, &nvm_regs_p->addr.raw);
145 
146 		/* page erase */
147 		flash_initiate_operation(NVMOP_PAGE_ERASE);
148 
149 		/* wait */
150 		rc = flash_wait_till_busy(__func__,
151 					  CONFIG_SYS_FLASH_ERASE_TOUT);
152 
153 		/* re-enable interrupts if necessary */
154 		if (flags)
155 			enable_interrupts();
156 
157 		if (rc != ERR_OK)
158 			return rc;
159 
160 		rc = flash_complete_operation();
161 		if (rc != ERR_OK)
162 			return rc;
163 
164 		/*
165 		 * flash content is updated but cache might contain stale
166 		 * data, so invalidate dcache.
167 		 */
168 		sect_end = info->start[sect] + info->size / info->sector_count;
169 		invalidate_dcache_range(info->start[sect], sect_end);
170 	}
171 
172 	printf(" done\n");
173 	return ERR_OK;
174 }
175 
176 int page_erase(flash_info_t *info, int sect)
177 {
178 	return 0;
179 }
180 
181 /* Write a word to flash */
182 static int write_word(flash_info_t *info, ulong dest, ulong word)
183 {
184 	ulong flags;
185 	int rc;
186 
187 	/* read flash to check if it is sufficiently erased */
188 	if ((readl((void __iomem *)dest) & word) != word) {
189 		printf("Error, Flash not erased!\n");
190 		return ERR_NOT_ERASED;
191 	}
192 
193 	/* disable interrupts */
194 	flags = disable_interrupts();
195 
196 	/* update destination page address (physical) */
197 	writel(CPHYSADDR(dest), &nvm_regs_p->addr.raw);
198 	writel(word, &nvm_regs_p->data.raw);
199 
200 	/* word write */
201 	flash_initiate_operation(NVMOP_WORD_WRITE);
202 
203 	/* wait for operation to complete */
204 	rc = flash_wait_till_busy(__func__, CONFIG_SYS_FLASH_WRITE_TOUT);
205 
206 	/* re-enable interrupts if necessary */
207 	if (flags)
208 		enable_interrupts();
209 
210 	if (rc != ERR_OK)
211 		return rc;
212 
213 	return flash_complete_operation();
214 }
215 
216 /*
217  * Copy memory to flash, returns:
218  * ERR_OK - OK
219  * ERR_TIMEOUT - write timeout
220  * ERR_NOT_ERASED - Flash not erased
221  */
222 int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
223 {
224 	ulong dst, tmp_le, len = cnt;
225 	int i, l, rc;
226 	uchar *cp;
227 
228 	/* get lower word aligned address */
229 	dst = (addr & ~3);
230 
231 	/* handle unaligned start bytes */
232 	l = addr - dst;
233 	if (l != 0) {
234 		tmp_le = 0;
235 		for (i = 0, cp = (uchar *)dst; i < l; ++i, ++cp)
236 			tmp_le |= *cp << (i * 8);
237 
238 		for (; (i < 4) && (cnt > 0); ++i, ++src, --cnt, ++cp)
239 			tmp_le |= *src << (i * 8);
240 
241 		for (; (cnt == 0) && (i < 4); ++i, ++cp)
242 			tmp_le |= *cp << (i * 8);
243 
244 		rc = write_word(info, dst, tmp_le);
245 		if (rc)
246 			goto out;
247 
248 		dst += 4;
249 	}
250 
251 	/* handle word aligned part */
252 	while (cnt >= 4) {
253 		tmp_le = src[0] | src[1] << 8 | src[2] << 16 | src[3] << 24;
254 		rc = write_word(info, dst, tmp_le);
255 		if (rc)
256 			goto out;
257 		src += 4;
258 		dst += 4;
259 		cnt -= 4;
260 	}
261 
262 	if (cnt == 0) {
263 		rc = ERR_OK;
264 		goto out;
265 	}
266 
267 	/* handle unaligned tail bytes */
268 	tmp_le = 0;
269 	for (i = 0, cp = (uchar *)dst; (i < 4) && (cnt > 0); ++i, ++cp) {
270 		tmp_le |= *src++ << (i * 8);
271 		--cnt;
272 	}
273 
274 	for (; i < 4; ++i, ++cp)
275 		tmp_le |= *cp << (i * 8);
276 
277 	rc = write_word(info, dst, tmp_le);
278 out:
279 	/*
280 	 * flash content updated by nvm controller but CPU cache might
281 	 * have stale data, so invalidate dcache.
282 	 */
283 	invalidate_dcache_range(addr, addr + len);
284 
285 	printf(" done\n");
286 	return rc;
287 }
288 
289 void flash_print_info(flash_info_t *info)
290 {
291 	int i;
292 
293 	if (info->flash_id == FLASH_UNKNOWN) {
294 		printf("missing or unknown FLASH type\n");
295 		return;
296 	}
297 
298 	switch (info->flash_id & FLASH_VENDMASK) {
299 	case FLASH_MAN_MCHP:
300 		printf("Microchip Technology ");
301 		break;
302 	default:
303 		printf("Unknown Vendor ");
304 		break;
305 	}
306 
307 	switch (info->flash_id & FLASH_TYPEMASK) {
308 	case FLASH_MCHP100T:
309 		printf("Internal (8 Mbit, 64 x 16k)\n");
310 		break;
311 	default:
312 		printf("Unknown Chip Type\n");
313 		break;
314 	}
315 
316 	printf("  Size: %ld MB in %d Sectors\n",
317 	       info->size >> 20, info->sector_count);
318 
319 	printf("  Sector Start Addresses:");
320 	for (i = 0; i < info->sector_count; ++i) {
321 		if ((i % 5) == 0)
322 			printf("\n   ");
323 
324 		printf(" %08lX%s", info->start[i],
325 		       info->protect[i] ? " (RO)" : "     ");
326 	}
327 	printf("\n");
328 }
329 
330 unsigned long flash_init(void)
331 {
332 	unsigned long size = 0;
333 	struct udevice *dev;
334 	int bank;
335 
336 	/* probe every MTD device */
337 	for (uclass_first_device(UCLASS_MTD, &dev); dev;
338 	     uclass_next_device(&dev)) {
339 		/* nop */
340 	}
341 
342 	/* calc total flash size */
343 	for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank)
344 		size += flash_info[bank].size;
345 
346 	return size;
347 }
348 
349 static void pic32_flash_bank_init(flash_info_t *info,
350 				  ulong base, ulong size)
351 {
352 	ulong sect_size;
353 	int sect;
354 
355 	/* device & manufacturer code */
356 	info->flash_id = FLASH_MAN_MCHP | FLASH_MCHP100T;
357 	info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
358 	info->size = size;
359 
360 	/* update sector (i.e page) info */
361 	sect_size = info->size / info->sector_count;
362 	for (sect = 0; sect < info->sector_count; sect++) {
363 		info->start[sect] = base;
364 		/* protect each sector by default */
365 		info->protect[sect] = 1;
366 		base += sect_size;
367 	}
368 }
369 
370 static int pic32_flash_probe(struct udevice *dev)
371 {
372 	void *blob = (void *)gd->fdt_blob;
373 	int node = dev_of_offset(dev);
374 	const char *list, *end;
375 	const fdt32_t *cell;
376 	unsigned long addr, size;
377 	int parent, addrc, sizec;
378 	flash_info_t *info;
379 	int len, idx;
380 
381 	/*
382 	 * decode regs. there are multiple reg tuples, and they need to
383 	 * match with reg-names.
384 	 */
385 	parent = fdt_parent_offset(blob, node);
386 	fdt_support_default_count_cells(blob, parent, &addrc, &sizec);
387 	list = fdt_getprop(blob, node, "reg-names", &len);
388 	if (!list)
389 		return -ENOENT;
390 
391 	end = list + len;
392 	cell = fdt_getprop(blob, node, "reg", &len);
393 	if (!cell)
394 		return -ENOENT;
395 
396 	for (idx = 0, info = &flash_info[0]; list < end;) {
397 		addr = fdt_translate_address((void *)blob, node, cell + idx);
398 		size = fdt_addr_to_cpu(cell[idx + addrc]);
399 		len = strlen(list);
400 		if (!strncmp(list, "nvm", len)) {
401 			/* NVM controller */
402 			nvm_regs_p = ioremap(addr, size);
403 		} else if (!strncmp(list, "bank", 4)) {
404 			/* Flash bank: use kseg0 cached address */
405 			pic32_flash_bank_init(info, CKSEG0ADDR(addr), size);
406 			info++;
407 		}
408 		idx += addrc + sizec;
409 		list += len + 1;
410 	}
411 
412 	/* disable flash write/erase operations */
413 	writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
414 
415 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
416 	/* monitor protection ON by default */
417 	flash_protect(FLAG_PROTECT_SET,
418 		      CONFIG_SYS_MONITOR_BASE,
419 		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
420 		      &flash_info[0]);
421 #endif
422 
423 #ifdef CONFIG_ENV_IS_IN_FLASH
424 	/* ENV protection ON by default */
425 	flash_protect(FLAG_PROTECT_SET,
426 		      CONFIG_ENV_ADDR,
427 		      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
428 		      &flash_info[0]);
429 #endif
430 	return 0;
431 }
432 
433 static const struct udevice_id pic32_flash_ids[] = {
434 	{ .compatible = "microchip,pic32mzda-flash" },
435 	{}
436 };
437 
438 U_BOOT_DRIVER(pic32_flash) = {
439 	.name	= "pic32_flash",
440 	.id	= UCLASS_MTD,
441 	.of_match = pic32_flash_ids,
442 	.probe	= pic32_flash_probe,
443 };
444