1 /* 2 * linux/drivers/mtd/onenand/onenand_base.c 3 * 4 * Copyright (C) 2005-2007 Samsung Electronics 5 * Kyungmin Park <kyungmin.park@samsung.com> 6 * 7 * Credits: 8 * Adrian Hunter <ext-adrian.hunter@nokia.com>: 9 * auto-placement support, read-while load support, various fixes 10 * Copyright (C) Nokia Corporation, 2007 11 * 12 * Rohit Hagargundgi <h.rohit at samsung.com>, 13 * Amul Kumar Saha <amul.saha@samsung.com>: 14 * Flex-OneNAND support 15 * Copyright (C) Samsung Electronics, 2009 16 * 17 * This program is free software; you can redistribute it and/or modify 18 * it under the terms of the GNU General Public License version 2 as 19 * published by the Free Software Foundation. 20 */ 21 22 #include <common.h> 23 #include <watchdog.h> 24 #include <linux/compat.h> 25 #include <linux/mtd/mtd.h> 26 #include "linux/mtd/flashchip.h" 27 #include <linux/mtd/onenand.h> 28 29 #include <asm/io.h> 30 #include <linux/errno.h> 31 #include <malloc.h> 32 33 /* It should access 16-bit instead of 8-bit */ 34 static void *memcpy_16(void *dst, const void *src, unsigned int len) 35 { 36 void *ret = dst; 37 short *d = dst; 38 const short *s = src; 39 40 len >>= 1; 41 while (len-- > 0) 42 *d++ = *s++; 43 return ret; 44 } 45 46 /** 47 * onenand_oob_128 - oob info for Flex-Onenand with 4KB page 48 * For now, we expose only 64 out of 80 ecc bytes 49 */ 50 static struct nand_ecclayout onenand_oob_128 = { 51 .eccbytes = 64, 52 .eccpos = { 53 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 54 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 55 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 56 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 57 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 58 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 59 102, 103, 104, 105 60 }, 61 .oobfree = { 62 {2, 4}, {18, 4}, {34, 4}, {50, 4}, 63 {66, 4}, {82, 4}, {98, 4}, {114, 4} 64 } 65 }; 66 67 /** 68 * onenand_oob_64 - oob info for large (2KB) page 69 */ 70 static struct nand_ecclayout onenand_oob_64 = { 71 .eccbytes = 20, 72 .eccpos = { 73 8, 9, 10, 11, 12, 74 24, 25, 26, 27, 28, 75 40, 41, 42, 43, 44, 76 56, 57, 58, 59, 60, 77 }, 78 .oobfree = { 79 {2, 3}, {14, 2}, {18, 3}, {30, 2}, 80 {34, 3}, {46, 2}, {50, 3}, {62, 2} 81 } 82 }; 83 84 /** 85 * onenand_oob_32 - oob info for middle (1KB) page 86 */ 87 static struct nand_ecclayout onenand_oob_32 = { 88 .eccbytes = 10, 89 .eccpos = { 90 8, 9, 10, 11, 12, 91 24, 25, 26, 27, 28, 92 }, 93 .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} } 94 }; 95 96 /* 97 * Warning! This array is used with the memcpy_16() function, thus 98 * it must be aligned to 2 bytes. GCC can make this array unaligned 99 * as the array is made of unsigned char, which memcpy16() doesn't 100 * like and will cause unaligned access. 101 */ 102 static const unsigned char __aligned(2) ffchars[] = { 103 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 104 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */ 105 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 106 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */ 107 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 108 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ 109 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 110 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ 111 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 112 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */ 113 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 114 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */ 115 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 116 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */ 117 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 118 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */ 119 }; 120 121 /** 122 * onenand_readw - [OneNAND Interface] Read OneNAND register 123 * @param addr address to read 124 * 125 * Read OneNAND register 126 */ 127 static unsigned short onenand_readw(void __iomem * addr) 128 { 129 return readw(addr); 130 } 131 132 /** 133 * onenand_writew - [OneNAND Interface] Write OneNAND register with value 134 * @param value value to write 135 * @param addr address to write 136 * 137 * Write OneNAND register with value 138 */ 139 static void onenand_writew(unsigned short value, void __iomem * addr) 140 { 141 writew(value, addr); 142 } 143 144 /** 145 * onenand_block_address - [DEFAULT] Get block address 146 * @param device the device id 147 * @param block the block 148 * @return translated block address if DDP, otherwise same 149 * 150 * Setup Start Address 1 Register (F100h) 151 */ 152 static int onenand_block_address(struct onenand_chip *this, int block) 153 { 154 /* Device Flash Core select, NAND Flash Block Address */ 155 if (block & this->density_mask) 156 return ONENAND_DDP_CHIP1 | (block ^ this->density_mask); 157 158 return block; 159 } 160 161 /** 162 * onenand_bufferram_address - [DEFAULT] Get bufferram address 163 * @param device the device id 164 * @param block the block 165 * @return set DBS value if DDP, otherwise 0 166 * 167 * Setup Start Address 2 Register (F101h) for DDP 168 */ 169 static int onenand_bufferram_address(struct onenand_chip *this, int block) 170 { 171 /* Device BufferRAM Select */ 172 if (block & this->density_mask) 173 return ONENAND_DDP_CHIP1; 174 175 return ONENAND_DDP_CHIP0; 176 } 177 178 /** 179 * onenand_page_address - [DEFAULT] Get page address 180 * @param page the page address 181 * @param sector the sector address 182 * @return combined page and sector address 183 * 184 * Setup Start Address 8 Register (F107h) 185 */ 186 static int onenand_page_address(int page, int sector) 187 { 188 /* Flash Page Address, Flash Sector Address */ 189 int fpa, fsa; 190 191 fpa = page & ONENAND_FPA_MASK; 192 fsa = sector & ONENAND_FSA_MASK; 193 194 return ((fpa << ONENAND_FPA_SHIFT) | fsa); 195 } 196 197 /** 198 * onenand_buffer_address - [DEFAULT] Get buffer address 199 * @param dataram1 DataRAM index 200 * @param sectors the sector address 201 * @param count the number of sectors 202 * @return the start buffer value 203 * 204 * Setup Start Buffer Register (F200h) 205 */ 206 static int onenand_buffer_address(int dataram1, int sectors, int count) 207 { 208 int bsa, bsc; 209 210 /* BufferRAM Sector Address */ 211 bsa = sectors & ONENAND_BSA_MASK; 212 213 if (dataram1) 214 bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */ 215 else 216 bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */ 217 218 /* BufferRAM Sector Count */ 219 bsc = count & ONENAND_BSC_MASK; 220 221 return ((bsa << ONENAND_BSA_SHIFT) | bsc); 222 } 223 224 /** 225 * flexonenand_block - Return block number for flash address 226 * @param this - OneNAND device structure 227 * @param addr - Address for which block number is needed 228 */ 229 static unsigned int flexonenand_block(struct onenand_chip *this, loff_t addr) 230 { 231 unsigned int boundary, blk, die = 0; 232 233 if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) { 234 die = 1; 235 addr -= this->diesize[0]; 236 } 237 238 boundary = this->boundary[die]; 239 240 blk = addr >> (this->erase_shift - 1); 241 if (blk > boundary) 242 blk = (blk + boundary + 1) >> 1; 243 244 blk += die ? this->density_mask : 0; 245 return blk; 246 } 247 248 unsigned int onenand_block(struct onenand_chip *this, loff_t addr) 249 { 250 if (!FLEXONENAND(this)) 251 return addr >> this->erase_shift; 252 return flexonenand_block(this, addr); 253 } 254 255 /** 256 * flexonenand_addr - Return address of the block 257 * @this: OneNAND device structure 258 * @block: Block number on Flex-OneNAND 259 * 260 * Return address of the block 261 */ 262 static loff_t flexonenand_addr(struct onenand_chip *this, int block) 263 { 264 loff_t ofs = 0; 265 int die = 0, boundary; 266 267 if (ONENAND_IS_DDP(this) && block >= this->density_mask) { 268 block -= this->density_mask; 269 die = 1; 270 ofs = this->diesize[0]; 271 } 272 273 boundary = this->boundary[die]; 274 ofs += (loff_t) block << (this->erase_shift - 1); 275 if (block > (boundary + 1)) 276 ofs += (loff_t) (block - boundary - 1) 277 << (this->erase_shift - 1); 278 return ofs; 279 } 280 281 loff_t onenand_addr(struct onenand_chip *this, int block) 282 { 283 if (!FLEXONENAND(this)) 284 return (loff_t) block << this->erase_shift; 285 return flexonenand_addr(this, block); 286 } 287 288 /** 289 * flexonenand_region - [Flex-OneNAND] Return erase region of addr 290 * @param mtd MTD device structure 291 * @param addr address whose erase region needs to be identified 292 */ 293 int flexonenand_region(struct mtd_info *mtd, loff_t addr) 294 { 295 int i; 296 297 for (i = 0; i < mtd->numeraseregions; i++) 298 if (addr < mtd->eraseregions[i].offset) 299 break; 300 return i - 1; 301 } 302 303 /** 304 * onenand_get_density - [DEFAULT] Get OneNAND density 305 * @param dev_id OneNAND device ID 306 * 307 * Get OneNAND density from device ID 308 */ 309 static inline int onenand_get_density(int dev_id) 310 { 311 int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; 312 return (density & ONENAND_DEVICE_DENSITY_MASK); 313 } 314 315 /** 316 * onenand_command - [DEFAULT] Send command to OneNAND device 317 * @param mtd MTD device structure 318 * @param cmd the command to be sent 319 * @param addr offset to read from or write to 320 * @param len number of bytes to read or write 321 * 322 * Send command to OneNAND device. This function is used for middle/large page 323 * devices (1KB/2KB Bytes per page) 324 */ 325 static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, 326 size_t len) 327 { 328 struct onenand_chip *this = mtd->priv; 329 int value; 330 int block, page; 331 332 /* Now we use page size operation */ 333 int sectors = 0, count = 0; 334 335 /* Address translation */ 336 switch (cmd) { 337 case ONENAND_CMD_UNLOCK: 338 case ONENAND_CMD_LOCK: 339 case ONENAND_CMD_LOCK_TIGHT: 340 case ONENAND_CMD_UNLOCK_ALL: 341 block = -1; 342 page = -1; 343 break; 344 345 case FLEXONENAND_CMD_PI_ACCESS: 346 /* addr contains die index */ 347 block = addr * this->density_mask; 348 page = -1; 349 break; 350 351 case ONENAND_CMD_ERASE: 352 case ONENAND_CMD_BUFFERRAM: 353 block = onenand_block(this, addr); 354 page = -1; 355 break; 356 357 case FLEXONENAND_CMD_READ_PI: 358 cmd = ONENAND_CMD_READ; 359 block = addr * this->density_mask; 360 page = 0; 361 break; 362 363 default: 364 block = onenand_block(this, addr); 365 page = (int) (addr 366 - onenand_addr(this, block)) >> this->page_shift; 367 page &= this->page_mask; 368 break; 369 } 370 371 /* NOTE: The setting order of the registers is very important! */ 372 if (cmd == ONENAND_CMD_BUFFERRAM) { 373 /* Select DataRAM for DDP */ 374 value = onenand_bufferram_address(this, block); 375 this->write_word(value, 376 this->base + ONENAND_REG_START_ADDRESS2); 377 378 if (ONENAND_IS_4KB_PAGE(this)) 379 ONENAND_SET_BUFFERRAM0(this); 380 else 381 /* Switch to the next data buffer */ 382 ONENAND_SET_NEXT_BUFFERRAM(this); 383 384 return 0; 385 } 386 387 if (block != -1) { 388 /* Write 'DFS, FBA' of Flash */ 389 value = onenand_block_address(this, block); 390 this->write_word(value, 391 this->base + ONENAND_REG_START_ADDRESS1); 392 393 /* Select DataRAM for DDP */ 394 value = onenand_bufferram_address(this, block); 395 this->write_word(value, 396 this->base + ONENAND_REG_START_ADDRESS2); 397 } 398 399 if (page != -1) { 400 int dataram; 401 402 switch (cmd) { 403 case FLEXONENAND_CMD_RECOVER_LSB: 404 case ONENAND_CMD_READ: 405 case ONENAND_CMD_READOOB: 406 if (ONENAND_IS_4KB_PAGE(this)) 407 dataram = ONENAND_SET_BUFFERRAM0(this); 408 else 409 dataram = ONENAND_SET_NEXT_BUFFERRAM(this); 410 411 break; 412 413 default: 414 dataram = ONENAND_CURRENT_BUFFERRAM(this); 415 break; 416 } 417 418 /* Write 'FPA, FSA' of Flash */ 419 value = onenand_page_address(page, sectors); 420 this->write_word(value, 421 this->base + ONENAND_REG_START_ADDRESS8); 422 423 /* Write 'BSA, BSC' of DataRAM */ 424 value = onenand_buffer_address(dataram, sectors, count); 425 this->write_word(value, this->base + ONENAND_REG_START_BUFFER); 426 } 427 428 /* Interrupt clear */ 429 this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); 430 /* Write command */ 431 this->write_word(cmd, this->base + ONENAND_REG_COMMAND); 432 433 return 0; 434 } 435 436 /** 437 * onenand_read_ecc - return ecc status 438 * @param this onenand chip structure 439 */ 440 static int onenand_read_ecc(struct onenand_chip *this) 441 { 442 int ecc, i; 443 444 if (!FLEXONENAND(this)) 445 return this->read_word(this->base + ONENAND_REG_ECC_STATUS); 446 447 for (i = 0; i < 4; i++) { 448 ecc = this->read_word(this->base 449 + ((ONENAND_REG_ECC_STATUS + i) << 1)); 450 if (likely(!ecc)) 451 continue; 452 if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR) 453 return ONENAND_ECC_2BIT_ALL; 454 } 455 456 return 0; 457 } 458 459 /** 460 * onenand_wait - [DEFAULT] wait until the command is done 461 * @param mtd MTD device structure 462 * @param state state to select the max. timeout value 463 * 464 * Wait for command done. This applies to all OneNAND command 465 * Read can take up to 30us, erase up to 2ms and program up to 350us 466 * according to general OneNAND specs 467 */ 468 static int onenand_wait(struct mtd_info *mtd, int state) 469 { 470 struct onenand_chip *this = mtd->priv; 471 unsigned int interrupt = 0; 472 unsigned int ctrl; 473 474 /* Wait at most 20ms ... */ 475 u32 timeo = (CONFIG_SYS_HZ * 20) / 1000; 476 u32 time_start = get_timer(0); 477 do { 478 WATCHDOG_RESET(); 479 if (get_timer(time_start) > timeo) 480 return -EIO; 481 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); 482 } while ((interrupt & ONENAND_INT_MASTER) == 0); 483 484 ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); 485 486 if (interrupt & ONENAND_INT_READ) { 487 int ecc = onenand_read_ecc(this); 488 if (ecc & ONENAND_ECC_2BIT_ALL) { 489 printk("onenand_wait: ECC error = 0x%04x\n", ecc); 490 return -EBADMSG; 491 } 492 } 493 494 if (ctrl & ONENAND_CTRL_ERROR) { 495 printk("onenand_wait: controller error = 0x%04x\n", ctrl); 496 if (ctrl & ONENAND_CTRL_LOCK) 497 printk("onenand_wait: it's locked error = 0x%04x\n", 498 ctrl); 499 500 return -EIO; 501 } 502 503 504 return 0; 505 } 506 507 /** 508 * onenand_bufferram_offset - [DEFAULT] BufferRAM offset 509 * @param mtd MTD data structure 510 * @param area BufferRAM area 511 * @return offset given area 512 * 513 * Return BufferRAM offset given area 514 */ 515 static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) 516 { 517 struct onenand_chip *this = mtd->priv; 518 519 if (ONENAND_CURRENT_BUFFERRAM(this)) { 520 if (area == ONENAND_DATARAM) 521 return mtd->writesize; 522 if (area == ONENAND_SPARERAM) 523 return mtd->oobsize; 524 } 525 526 return 0; 527 } 528 529 /** 530 * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area 531 * @param mtd MTD data structure 532 * @param area BufferRAM area 533 * @param buffer the databuffer to put/get data 534 * @param offset offset to read from or write to 535 * @param count number of bytes to read/write 536 * 537 * Read the BufferRAM area 538 */ 539 static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area, 540 unsigned char *buffer, int offset, 541 size_t count) 542 { 543 struct onenand_chip *this = mtd->priv; 544 void __iomem *bufferram; 545 546 bufferram = this->base + area; 547 bufferram += onenand_bufferram_offset(mtd, area); 548 549 memcpy_16(buffer, bufferram + offset, count); 550 551 return 0; 552 } 553 554 /** 555 * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode 556 * @param mtd MTD data structure 557 * @param area BufferRAM area 558 * @param buffer the databuffer to put/get data 559 * @param offset offset to read from or write to 560 * @param count number of bytes to read/write 561 * 562 * Read the BufferRAM area with Sync. Burst Mode 563 */ 564 static int onenand_sync_read_bufferram(struct mtd_info *mtd, loff_t addr, int area, 565 unsigned char *buffer, int offset, 566 size_t count) 567 { 568 struct onenand_chip *this = mtd->priv; 569 void __iomem *bufferram; 570 571 bufferram = this->base + area; 572 bufferram += onenand_bufferram_offset(mtd, area); 573 574 this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); 575 576 memcpy_16(buffer, bufferram + offset, count); 577 578 this->mmcontrol(mtd, 0); 579 580 return 0; 581 } 582 583 /** 584 * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area 585 * @param mtd MTD data structure 586 * @param area BufferRAM area 587 * @param buffer the databuffer to put/get data 588 * @param offset offset to read from or write to 589 * @param count number of bytes to read/write 590 * 591 * Write the BufferRAM area 592 */ 593 static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area, 594 const unsigned char *buffer, int offset, 595 size_t count) 596 { 597 struct onenand_chip *this = mtd->priv; 598 void __iomem *bufferram; 599 600 bufferram = this->base + area; 601 bufferram += onenand_bufferram_offset(mtd, area); 602 603 memcpy_16(bufferram + offset, buffer, count); 604 605 return 0; 606 } 607 608 /** 609 * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode 610 * @param mtd MTD data structure 611 * @param addr address to check 612 * @return blockpage address 613 * 614 * Get blockpage address at 2x program mode 615 */ 616 static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) 617 { 618 struct onenand_chip *this = mtd->priv; 619 int blockpage, block, page; 620 621 /* Calculate the even block number */ 622 block = (int) (addr >> this->erase_shift) & ~1; 623 /* Is it the odd plane? */ 624 if (addr & this->writesize) 625 block++; 626 page = (int) (addr >> (this->page_shift + 1)) & this->page_mask; 627 blockpage = (block << 7) | page; 628 629 return blockpage; 630 } 631 632 /** 633 * onenand_check_bufferram - [GENERIC] Check BufferRAM information 634 * @param mtd MTD data structure 635 * @param addr address to check 636 * @return 1 if there are valid data, otherwise 0 637 * 638 * Check bufferram if there is data we required 639 */ 640 static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) 641 { 642 struct onenand_chip *this = mtd->priv; 643 int blockpage, found = 0; 644 unsigned int i; 645 646 if (ONENAND_IS_2PLANE(this)) 647 blockpage = onenand_get_2x_blockpage(mtd, addr); 648 else 649 blockpage = (int) (addr >> this->page_shift); 650 651 /* Is there valid data? */ 652 i = ONENAND_CURRENT_BUFFERRAM(this); 653 if (this->bufferram[i].blockpage == blockpage) 654 found = 1; 655 else { 656 /* Check another BufferRAM */ 657 i = ONENAND_NEXT_BUFFERRAM(this); 658 if (this->bufferram[i].blockpage == blockpage) { 659 ONENAND_SET_NEXT_BUFFERRAM(this); 660 found = 1; 661 } 662 } 663 664 if (found && ONENAND_IS_DDP(this)) { 665 /* Select DataRAM for DDP */ 666 int block = onenand_block(this, addr); 667 int value = onenand_bufferram_address(this, block); 668 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); 669 } 670 671 return found; 672 } 673 674 /** 675 * onenand_update_bufferram - [GENERIC] Update BufferRAM information 676 * @param mtd MTD data structure 677 * @param addr address to update 678 * @param valid valid flag 679 * 680 * Update BufferRAM information 681 */ 682 static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, 683 int valid) 684 { 685 struct onenand_chip *this = mtd->priv; 686 int blockpage; 687 unsigned int i; 688 689 if (ONENAND_IS_2PLANE(this)) 690 blockpage = onenand_get_2x_blockpage(mtd, addr); 691 else 692 blockpage = (int)(addr >> this->page_shift); 693 694 /* Invalidate another BufferRAM */ 695 i = ONENAND_NEXT_BUFFERRAM(this); 696 if (this->bufferram[i].blockpage == blockpage) 697 this->bufferram[i].blockpage = -1; 698 699 /* Update BufferRAM */ 700 i = ONENAND_CURRENT_BUFFERRAM(this); 701 if (valid) 702 this->bufferram[i].blockpage = blockpage; 703 else 704 this->bufferram[i].blockpage = -1; 705 706 return 0; 707 } 708 709 /** 710 * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information 711 * @param mtd MTD data structure 712 * @param addr start address to invalidate 713 * @param len length to invalidate 714 * 715 * Invalidate BufferRAM information 716 */ 717 static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr, 718 unsigned int len) 719 { 720 struct onenand_chip *this = mtd->priv; 721 int i; 722 loff_t end_addr = addr + len; 723 724 /* Invalidate BufferRAM */ 725 for (i = 0; i < MAX_BUFFERRAM; i++) { 726 loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift; 727 728 if (buf_addr >= addr && buf_addr < end_addr) 729 this->bufferram[i].blockpage = -1; 730 } 731 } 732 733 /** 734 * onenand_get_device - [GENERIC] Get chip for selected access 735 * @param mtd MTD device structure 736 * @param new_state the state which is requested 737 * 738 * Get the device and lock it for exclusive access 739 */ 740 static void onenand_get_device(struct mtd_info *mtd, int new_state) 741 { 742 /* Do nothing */ 743 } 744 745 /** 746 * onenand_release_device - [GENERIC] release chip 747 * @param mtd MTD device structure 748 * 749 * Deselect, release chip lock and wake up anyone waiting on the device 750 */ 751 static void onenand_release_device(struct mtd_info *mtd) 752 { 753 /* Do nothing */ 754 } 755 756 /** 757 * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer 758 * @param mtd MTD device structure 759 * @param buf destination address 760 * @param column oob offset to read from 761 * @param thislen oob length to read 762 */ 763 static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, 764 int column, int thislen) 765 { 766 struct onenand_chip *this = mtd->priv; 767 struct nand_oobfree *free; 768 int readcol = column; 769 int readend = column + thislen; 770 int lastgap = 0; 771 unsigned int i; 772 uint8_t *oob_buf = this->oob_buf; 773 774 free = this->ecclayout->oobfree; 775 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; 776 i++, free++) { 777 if (readcol >= lastgap) 778 readcol += free->offset - lastgap; 779 if (readend >= lastgap) 780 readend += free->offset - lastgap; 781 lastgap = free->offset + free->length; 782 } 783 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); 784 free = this->ecclayout->oobfree; 785 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; 786 i++, free++) { 787 int free_end = free->offset + free->length; 788 if (free->offset < readend && free_end > readcol) { 789 int st = max_t(int,free->offset,readcol); 790 int ed = min_t(int,free_end,readend); 791 int n = ed - st; 792 memcpy(buf, oob_buf + st, n); 793 buf += n; 794 } else if (column == 0) 795 break; 796 } 797 return 0; 798 } 799 800 /** 801 * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data 802 * @param mtd MTD device structure 803 * @param addr address to recover 804 * @param status return value from onenand_wait 805 * 806 * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has 807 * lower page address and MSB page has higher page address in paired pages. 808 * If power off occurs during MSB page program, the paired LSB page data can 809 * become corrupt. LSB page recovery read is a way to read LSB page though page 810 * data are corrupted. When uncorrectable error occurs as a result of LSB page 811 * read after power up, issue LSB page recovery read. 812 */ 813 static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status) 814 { 815 struct onenand_chip *this = mtd->priv; 816 int i; 817 818 /* Recovery is only for Flex-OneNAND */ 819 if (!FLEXONENAND(this)) 820 return status; 821 822 /* check if we failed due to uncorrectable error */ 823 if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR) 824 return status; 825 826 /* check if address lies in MLC region */ 827 i = flexonenand_region(mtd, addr); 828 if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift)) 829 return status; 830 831 printk("onenand_recover_lsb:" 832 "Attempting to recover from uncorrectable read\n"); 833 834 /* Issue the LSB page recovery command */ 835 this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize); 836 return this->wait(mtd, FL_READING); 837 } 838 839 /** 840 * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band 841 * @param mtd MTD device structure 842 * @param from offset to read from 843 * @param ops oob operation description structure 844 * 845 * OneNAND read main and/or out-of-band data 846 */ 847 static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, 848 struct mtd_oob_ops *ops) 849 { 850 struct onenand_chip *this = mtd->priv; 851 struct mtd_ecc_stats stats; 852 size_t len = ops->len; 853 size_t ooblen = ops->ooblen; 854 u_char *buf = ops->datbuf; 855 u_char *oobbuf = ops->oobbuf; 856 int read = 0, column, thislen; 857 int oobread = 0, oobcolumn, thisooblen, oobsize; 858 int ret = 0, boundary = 0; 859 int writesize = this->writesize; 860 861 pr_debug("onenand_read_ops_nolock: from = 0x%08x, len = %i\n", 862 (unsigned int) from, (int) len); 863 864 if (ops->mode == MTD_OPS_AUTO_OOB) 865 oobsize = this->ecclayout->oobavail; 866 else 867 oobsize = mtd->oobsize; 868 869 oobcolumn = from & (mtd->oobsize - 1); 870 871 /* Do not allow reads past end of device */ 872 if ((from + len) > mtd->size) { 873 printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n"); 874 ops->retlen = 0; 875 ops->oobretlen = 0; 876 return -EINVAL; 877 } 878 879 stats = mtd->ecc_stats; 880 881 /* Read-while-load method */ 882 /* Note: We can't use this feature in MLC */ 883 884 /* Do first load to bufferRAM */ 885 if (read < len) { 886 if (!onenand_check_bufferram(mtd, from)) { 887 this->main_buf = buf; 888 this->command(mtd, ONENAND_CMD_READ, from, writesize); 889 ret = this->wait(mtd, FL_READING); 890 if (unlikely(ret)) 891 ret = onenand_recover_lsb(mtd, from, ret); 892 onenand_update_bufferram(mtd, from, !ret); 893 if (ret == -EBADMSG) 894 ret = 0; 895 } 896 } 897 898 thislen = min_t(int, writesize, len - read); 899 column = from & (writesize - 1); 900 if (column + thislen > writesize) 901 thislen = writesize - column; 902 903 while (!ret) { 904 /* If there is more to load then start next load */ 905 from += thislen; 906 if (!ONENAND_IS_4KB_PAGE(this) && read + thislen < len) { 907 this->main_buf = buf + thislen; 908 this->command(mtd, ONENAND_CMD_READ, from, writesize); 909 /* 910 * Chip boundary handling in DDP 911 * Now we issued chip 1 read and pointed chip 1 912 * bufferam so we have to point chip 0 bufferam. 913 */ 914 if (ONENAND_IS_DDP(this) && 915 unlikely(from == (this->chipsize >> 1))) { 916 this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2); 917 boundary = 1; 918 } else 919 boundary = 0; 920 ONENAND_SET_PREV_BUFFERRAM(this); 921 } 922 923 /* While load is going, read from last bufferRAM */ 924 this->read_bufferram(mtd, from - thislen, ONENAND_DATARAM, buf, column, thislen); 925 926 /* Read oob area if needed */ 927 if (oobbuf) { 928 thisooblen = oobsize - oobcolumn; 929 thisooblen = min_t(int, thisooblen, ooblen - oobread); 930 931 if (ops->mode == MTD_OPS_AUTO_OOB) 932 onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen); 933 else 934 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen); 935 oobread += thisooblen; 936 oobbuf += thisooblen; 937 oobcolumn = 0; 938 } 939 940 if (ONENAND_IS_4KB_PAGE(this) && (read + thislen < len)) { 941 this->command(mtd, ONENAND_CMD_READ, from, writesize); 942 ret = this->wait(mtd, FL_READING); 943 if (unlikely(ret)) 944 ret = onenand_recover_lsb(mtd, from, ret); 945 onenand_update_bufferram(mtd, from, !ret); 946 if (mtd_is_eccerr(ret)) 947 ret = 0; 948 } 949 950 /* See if we are done */ 951 read += thislen; 952 if (read == len) 953 break; 954 /* Set up for next read from bufferRAM */ 955 if (unlikely(boundary)) 956 this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); 957 if (!ONENAND_IS_4KB_PAGE(this)) 958 ONENAND_SET_NEXT_BUFFERRAM(this); 959 buf += thislen; 960 thislen = min_t(int, writesize, len - read); 961 column = 0; 962 963 if (!ONENAND_IS_4KB_PAGE(this)) { 964 /* Now wait for load */ 965 ret = this->wait(mtd, FL_READING); 966 onenand_update_bufferram(mtd, from, !ret); 967 if (mtd_is_eccerr(ret)) 968 ret = 0; 969 } 970 } 971 972 /* 973 * Return success, if no ECC failures, else -EBADMSG 974 * fs driver will take care of that, because 975 * retlen == desired len and result == -EBADMSG 976 */ 977 ops->retlen = read; 978 ops->oobretlen = oobread; 979 980 if (ret) 981 return ret; 982 983 if (mtd->ecc_stats.failed - stats.failed) 984 return -EBADMSG; 985 986 /* return max bitflips per ecc step; ONENANDs correct 1 bit only */ 987 return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0; 988 } 989 990 /** 991 * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band 992 * @param mtd MTD device structure 993 * @param from offset to read from 994 * @param ops oob operation description structure 995 * 996 * OneNAND read out-of-band data from the spare area 997 */ 998 static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, 999 struct mtd_oob_ops *ops) 1000 { 1001 struct onenand_chip *this = mtd->priv; 1002 struct mtd_ecc_stats stats; 1003 int read = 0, thislen, column, oobsize; 1004 size_t len = ops->ooblen; 1005 unsigned int mode = ops->mode; 1006 u_char *buf = ops->oobbuf; 1007 int ret = 0, readcmd; 1008 1009 from += ops->ooboffs; 1010 1011 pr_debug("onenand_read_oob_nolock: from = 0x%08x, len = %i\n", 1012 (unsigned int) from, (int) len); 1013 1014 /* Initialize return length value */ 1015 ops->oobretlen = 0; 1016 1017 if (mode == MTD_OPS_AUTO_OOB) 1018 oobsize = this->ecclayout->oobavail; 1019 else 1020 oobsize = mtd->oobsize; 1021 1022 column = from & (mtd->oobsize - 1); 1023 1024 if (unlikely(column >= oobsize)) { 1025 printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n"); 1026 return -EINVAL; 1027 } 1028 1029 /* Do not allow reads past end of device */ 1030 if (unlikely(from >= mtd->size || 1031 column + len > ((mtd->size >> this->page_shift) - 1032 (from >> this->page_shift)) * oobsize)) { 1033 printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n"); 1034 return -EINVAL; 1035 } 1036 1037 stats = mtd->ecc_stats; 1038 1039 readcmd = ONENAND_IS_4KB_PAGE(this) ? 1040 ONENAND_CMD_READ : ONENAND_CMD_READOOB; 1041 1042 while (read < len) { 1043 thislen = oobsize - column; 1044 thislen = min_t(int, thislen, len); 1045 1046 this->spare_buf = buf; 1047 this->command(mtd, readcmd, from, mtd->oobsize); 1048 1049 onenand_update_bufferram(mtd, from, 0); 1050 1051 ret = this->wait(mtd, FL_READING); 1052 if (unlikely(ret)) 1053 ret = onenand_recover_lsb(mtd, from, ret); 1054 1055 if (ret && ret != -EBADMSG) { 1056 printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret); 1057 break; 1058 } 1059 1060 if (mode == MTD_OPS_AUTO_OOB) 1061 onenand_transfer_auto_oob(mtd, buf, column, thislen); 1062 else 1063 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen); 1064 1065 read += thislen; 1066 1067 if (read == len) 1068 break; 1069 1070 buf += thislen; 1071 1072 /* Read more? */ 1073 if (read < len) { 1074 /* Page size */ 1075 from += mtd->writesize; 1076 column = 0; 1077 } 1078 } 1079 1080 ops->oobretlen = read; 1081 1082 if (ret) 1083 return ret; 1084 1085 if (mtd->ecc_stats.failed - stats.failed) 1086 return -EBADMSG; 1087 1088 return 0; 1089 } 1090 1091 /** 1092 * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc 1093 * @param mtd MTD device structure 1094 * @param from offset to read from 1095 * @param len number of bytes to read 1096 * @param retlen pointer to variable to store the number of read bytes 1097 * @param buf the databuffer to put data 1098 * 1099 * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL 1100 */ 1101 int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, 1102 size_t * retlen, u_char * buf) 1103 { 1104 struct mtd_oob_ops ops = { 1105 .len = len, 1106 .ooblen = 0, 1107 .datbuf = buf, 1108 .oobbuf = NULL, 1109 }; 1110 int ret; 1111 1112 onenand_get_device(mtd, FL_READING); 1113 ret = onenand_read_ops_nolock(mtd, from, &ops); 1114 onenand_release_device(mtd); 1115 1116 *retlen = ops.retlen; 1117 return ret; 1118 } 1119 1120 /** 1121 * onenand_read_oob - [MTD Interface] OneNAND read out-of-band 1122 * @param mtd MTD device structure 1123 * @param from offset to read from 1124 * @param ops oob operations description structure 1125 * 1126 * OneNAND main and/or out-of-band 1127 */ 1128 int onenand_read_oob(struct mtd_info *mtd, loff_t from, 1129 struct mtd_oob_ops *ops) 1130 { 1131 int ret; 1132 1133 switch (ops->mode) { 1134 case MTD_OPS_PLACE_OOB: 1135 case MTD_OPS_AUTO_OOB: 1136 break; 1137 case MTD_OPS_RAW: 1138 /* Not implemented yet */ 1139 default: 1140 return -EINVAL; 1141 } 1142 1143 onenand_get_device(mtd, FL_READING); 1144 if (ops->datbuf) 1145 ret = onenand_read_ops_nolock(mtd, from, ops); 1146 else 1147 ret = onenand_read_oob_nolock(mtd, from, ops); 1148 onenand_release_device(mtd); 1149 1150 return ret; 1151 } 1152 1153 /** 1154 * onenand_bbt_wait - [DEFAULT] wait until the command is done 1155 * @param mtd MTD device structure 1156 * @param state state to select the max. timeout value 1157 * 1158 * Wait for command done. 1159 */ 1160 static int onenand_bbt_wait(struct mtd_info *mtd, int state) 1161 { 1162 struct onenand_chip *this = mtd->priv; 1163 unsigned int interrupt; 1164 unsigned int ctrl; 1165 1166 /* Wait at most 20ms ... */ 1167 u32 timeo = (CONFIG_SYS_HZ * 20) / 1000; 1168 u32 time_start = get_timer(0); 1169 do { 1170 WATCHDOG_RESET(); 1171 if (get_timer(time_start) > timeo) 1172 return ONENAND_BBT_READ_FATAL_ERROR; 1173 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); 1174 } while ((interrupt & ONENAND_INT_MASTER) == 0); 1175 1176 /* To get correct interrupt status in timeout case */ 1177 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); 1178 ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); 1179 1180 if (interrupt & ONENAND_INT_READ) { 1181 int ecc = onenand_read_ecc(this); 1182 if (ecc & ONENAND_ECC_2BIT_ALL) { 1183 printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x" 1184 ", controller = 0x%04x\n", ecc, ctrl); 1185 return ONENAND_BBT_READ_ERROR; 1186 } 1187 } else { 1188 printk(KERN_ERR "onenand_bbt_wait: read timeout!" 1189 "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt); 1190 return ONENAND_BBT_READ_FATAL_ERROR; 1191 } 1192 1193 /* Initial bad block case: 0x2400 or 0x0400 */ 1194 if (ctrl & ONENAND_CTRL_ERROR) { 1195 printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl); 1196 return ONENAND_BBT_READ_ERROR; 1197 } 1198 1199 return 0; 1200 } 1201 1202 /** 1203 * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan 1204 * @param mtd MTD device structure 1205 * @param from offset to read from 1206 * @param ops oob operation description structure 1207 * 1208 * OneNAND read out-of-band data from the spare area for bbt scan 1209 */ 1210 int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, 1211 struct mtd_oob_ops *ops) 1212 { 1213 struct onenand_chip *this = mtd->priv; 1214 int read = 0, thislen, column; 1215 int ret = 0, readcmd; 1216 size_t len = ops->ooblen; 1217 u_char *buf = ops->oobbuf; 1218 1219 pr_debug("onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", 1220 (unsigned int) from, len); 1221 1222 readcmd = ONENAND_IS_4KB_PAGE(this) ? 1223 ONENAND_CMD_READ : ONENAND_CMD_READOOB; 1224 1225 /* Initialize return value */ 1226 ops->oobretlen = 0; 1227 1228 /* Do not allow reads past end of device */ 1229 if (unlikely((from + len) > mtd->size)) { 1230 printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n"); 1231 return ONENAND_BBT_READ_FATAL_ERROR; 1232 } 1233 1234 /* Grab the lock and see if the device is available */ 1235 onenand_get_device(mtd, FL_READING); 1236 1237 column = from & (mtd->oobsize - 1); 1238 1239 while (read < len) { 1240 1241 thislen = mtd->oobsize - column; 1242 thislen = min_t(int, thislen, len); 1243 1244 this->spare_buf = buf; 1245 this->command(mtd, readcmd, from, mtd->oobsize); 1246 1247 onenand_update_bufferram(mtd, from, 0); 1248 1249 ret = this->bbt_wait(mtd, FL_READING); 1250 if (unlikely(ret)) 1251 ret = onenand_recover_lsb(mtd, from, ret); 1252 1253 if (ret) 1254 break; 1255 1256 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen); 1257 read += thislen; 1258 if (read == len) 1259 break; 1260 1261 buf += thislen; 1262 1263 /* Read more? */ 1264 if (read < len) { 1265 /* Update Page size */ 1266 from += this->writesize; 1267 column = 0; 1268 } 1269 } 1270 1271 /* Deselect and wake up anyone waiting on the device */ 1272 onenand_release_device(mtd); 1273 1274 ops->oobretlen = read; 1275 return ret; 1276 } 1277 1278 1279 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE 1280 /** 1281 * onenand_verify_oob - [GENERIC] verify the oob contents after a write 1282 * @param mtd MTD device structure 1283 * @param buf the databuffer to verify 1284 * @param to offset to read from 1285 */ 1286 static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to) 1287 { 1288 struct onenand_chip *this = mtd->priv; 1289 u_char *oob_buf = this->oob_buf; 1290 int status, i, readcmd; 1291 1292 readcmd = ONENAND_IS_4KB_PAGE(this) ? 1293 ONENAND_CMD_READ : ONENAND_CMD_READOOB; 1294 1295 this->command(mtd, readcmd, to, mtd->oobsize); 1296 onenand_update_bufferram(mtd, to, 0); 1297 status = this->wait(mtd, FL_READING); 1298 if (status) 1299 return status; 1300 1301 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); 1302 for (i = 0; i < mtd->oobsize; i++) 1303 if (buf[i] != 0xFF && buf[i] != oob_buf[i]) 1304 return -EBADMSG; 1305 1306 return 0; 1307 } 1308 1309 /** 1310 * onenand_verify - [GENERIC] verify the chip contents after a write 1311 * @param mtd MTD device structure 1312 * @param buf the databuffer to verify 1313 * @param addr offset to read from 1314 * @param len number of bytes to read and compare 1315 */ 1316 static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len) 1317 { 1318 struct onenand_chip *this = mtd->priv; 1319 void __iomem *dataram; 1320 int ret = 0; 1321 int thislen, column; 1322 1323 while (len != 0) { 1324 thislen = min_t(int, this->writesize, len); 1325 column = addr & (this->writesize - 1); 1326 if (column + thislen > this->writesize) 1327 thislen = this->writesize - column; 1328 1329 this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); 1330 1331 onenand_update_bufferram(mtd, addr, 0); 1332 1333 ret = this->wait(mtd, FL_READING); 1334 if (ret) 1335 return ret; 1336 1337 onenand_update_bufferram(mtd, addr, 1); 1338 1339 dataram = this->base + ONENAND_DATARAM; 1340 dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM); 1341 1342 if (memcmp(buf, dataram + column, thislen)) 1343 return -EBADMSG; 1344 1345 len -= thislen; 1346 buf += thislen; 1347 addr += thislen; 1348 } 1349 1350 return 0; 1351 } 1352 #else 1353 #define onenand_verify(...) (0) 1354 #define onenand_verify_oob(...) (0) 1355 #endif 1356 1357 #define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0) 1358 1359 /** 1360 * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer 1361 * @param mtd MTD device structure 1362 * @param oob_buf oob buffer 1363 * @param buf source address 1364 * @param column oob offset to write to 1365 * @param thislen oob length to write 1366 */ 1367 static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, 1368 const u_char *buf, int column, int thislen) 1369 { 1370 struct onenand_chip *this = mtd->priv; 1371 struct nand_oobfree *free; 1372 int writecol = column; 1373 int writeend = column + thislen; 1374 int lastgap = 0; 1375 unsigned int i; 1376 1377 free = this->ecclayout->oobfree; 1378 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; 1379 i++, free++) { 1380 if (writecol >= lastgap) 1381 writecol += free->offset - lastgap; 1382 if (writeend >= lastgap) 1383 writeend += free->offset - lastgap; 1384 lastgap = free->offset + free->length; 1385 } 1386 free = this->ecclayout->oobfree; 1387 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; 1388 i++, free++) { 1389 int free_end = free->offset + free->length; 1390 if (free->offset < writeend && free_end > writecol) { 1391 int st = max_t(int,free->offset,writecol); 1392 int ed = min_t(int,free_end,writeend); 1393 int n = ed - st; 1394 memcpy(oob_buf + st, buf, n); 1395 buf += n; 1396 } else if (column == 0) 1397 break; 1398 } 1399 return 0; 1400 } 1401 1402 /** 1403 * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band 1404 * @param mtd MTD device structure 1405 * @param to offset to write to 1406 * @param ops oob operation description structure 1407 * 1408 * Write main and/or oob with ECC 1409 */ 1410 static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, 1411 struct mtd_oob_ops *ops) 1412 { 1413 struct onenand_chip *this = mtd->priv; 1414 int written = 0, column, thislen, subpage; 1415 int oobwritten = 0, oobcolumn, thisooblen, oobsize; 1416 size_t len = ops->len; 1417 size_t ooblen = ops->ooblen; 1418 const u_char *buf = ops->datbuf; 1419 const u_char *oob = ops->oobbuf; 1420 u_char *oobbuf; 1421 int ret = 0; 1422 1423 pr_debug("onenand_write_ops_nolock: to = 0x%08x, len = %i\n", 1424 (unsigned int) to, (int) len); 1425 1426 /* Initialize retlen, in case of early exit */ 1427 ops->retlen = 0; 1428 ops->oobretlen = 0; 1429 1430 /* Reject writes, which are not page aligned */ 1431 if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { 1432 printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n"); 1433 return -EINVAL; 1434 } 1435 1436 if (ops->mode == MTD_OPS_AUTO_OOB) 1437 oobsize = this->ecclayout->oobavail; 1438 else 1439 oobsize = mtd->oobsize; 1440 1441 oobcolumn = to & (mtd->oobsize - 1); 1442 1443 column = to & (mtd->writesize - 1); 1444 1445 /* Loop until all data write */ 1446 while (written < len) { 1447 u_char *wbuf = (u_char *) buf; 1448 1449 thislen = min_t(int, mtd->writesize - column, len - written); 1450 thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten); 1451 1452 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen); 1453 1454 /* Partial page write */ 1455 subpage = thislen < mtd->writesize; 1456 if (subpage) { 1457 memset(this->page_buf, 0xff, mtd->writesize); 1458 memcpy(this->page_buf + column, buf, thislen); 1459 wbuf = this->page_buf; 1460 } 1461 1462 this->write_bufferram(mtd, to, ONENAND_DATARAM, wbuf, 0, mtd->writesize); 1463 1464 if (oob) { 1465 oobbuf = this->oob_buf; 1466 1467 /* We send data to spare ram with oobsize 1468 * * to prevent byte access */ 1469 memset(oobbuf, 0xff, mtd->oobsize); 1470 if (ops->mode == MTD_OPS_AUTO_OOB) 1471 onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen); 1472 else 1473 memcpy(oobbuf + oobcolumn, oob, thisooblen); 1474 1475 oobwritten += thisooblen; 1476 oob += thisooblen; 1477 oobcolumn = 0; 1478 } else 1479 oobbuf = (u_char *) ffchars; 1480 1481 this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); 1482 1483 this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); 1484 1485 ret = this->wait(mtd, FL_WRITING); 1486 1487 /* In partial page write we don't update bufferram */ 1488 onenand_update_bufferram(mtd, to, !ret && !subpage); 1489 if (ONENAND_IS_2PLANE(this)) { 1490 ONENAND_SET_BUFFERRAM1(this); 1491 onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage); 1492 } 1493 1494 if (ret) { 1495 printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); 1496 break; 1497 } 1498 1499 /* Only check verify write turn on */ 1500 ret = onenand_verify(mtd, buf, to, thislen); 1501 if (ret) { 1502 printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret); 1503 break; 1504 } 1505 1506 written += thislen; 1507 1508 if (written == len) 1509 break; 1510 1511 column = 0; 1512 to += thislen; 1513 buf += thislen; 1514 } 1515 1516 ops->retlen = written; 1517 1518 return ret; 1519 } 1520 1521 /** 1522 * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band 1523 * @param mtd MTD device structure 1524 * @param to offset to write to 1525 * @param len number of bytes to write 1526 * @param retlen pointer to variable to store the number of written bytes 1527 * @param buf the data to write 1528 * @param mode operation mode 1529 * 1530 * OneNAND write out-of-band 1531 */ 1532 static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, 1533 struct mtd_oob_ops *ops) 1534 { 1535 struct onenand_chip *this = mtd->priv; 1536 int column, ret = 0, oobsize; 1537 int written = 0, oobcmd; 1538 u_char *oobbuf; 1539 size_t len = ops->ooblen; 1540 const u_char *buf = ops->oobbuf; 1541 unsigned int mode = ops->mode; 1542 1543 to += ops->ooboffs; 1544 1545 pr_debug("onenand_write_oob_nolock: to = 0x%08x, len = %i\n", 1546 (unsigned int) to, (int) len); 1547 1548 /* Initialize retlen, in case of early exit */ 1549 ops->oobretlen = 0; 1550 1551 if (mode == MTD_OPS_AUTO_OOB) 1552 oobsize = this->ecclayout->oobavail; 1553 else 1554 oobsize = mtd->oobsize; 1555 1556 column = to & (mtd->oobsize - 1); 1557 1558 if (unlikely(column >= oobsize)) { 1559 printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n"); 1560 return -EINVAL; 1561 } 1562 1563 /* For compatibility with NAND: Do not allow write past end of page */ 1564 if (unlikely(column + len > oobsize)) { 1565 printk(KERN_ERR "onenand_write_oob_nolock: " 1566 "Attempt to write past end of page\n"); 1567 return -EINVAL; 1568 } 1569 1570 /* Do not allow reads past end of device */ 1571 if (unlikely(to >= mtd->size || 1572 column + len > ((mtd->size >> this->page_shift) - 1573 (to >> this->page_shift)) * oobsize)) { 1574 printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n"); 1575 return -EINVAL; 1576 } 1577 1578 oobbuf = this->oob_buf; 1579 1580 oobcmd = ONENAND_IS_4KB_PAGE(this) ? 1581 ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; 1582 1583 /* Loop until all data write */ 1584 while (written < len) { 1585 int thislen = min_t(int, oobsize, len - written); 1586 1587 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); 1588 1589 /* We send data to spare ram with oobsize 1590 * to prevent byte access */ 1591 memset(oobbuf, 0xff, mtd->oobsize); 1592 if (mode == MTD_OPS_AUTO_OOB) 1593 onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen); 1594 else 1595 memcpy(oobbuf + column, buf, thislen); 1596 this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); 1597 1598 if (ONENAND_IS_4KB_PAGE(this)) { 1599 /* Set main area of DataRAM to 0xff*/ 1600 memset(this->page_buf, 0xff, mtd->writesize); 1601 this->write_bufferram(mtd, 0, ONENAND_DATARAM, 1602 this->page_buf, 0, mtd->writesize); 1603 } 1604 1605 this->command(mtd, oobcmd, to, mtd->oobsize); 1606 1607 onenand_update_bufferram(mtd, to, 0); 1608 if (ONENAND_IS_2PLANE(this)) { 1609 ONENAND_SET_BUFFERRAM1(this); 1610 onenand_update_bufferram(mtd, to + this->writesize, 0); 1611 } 1612 1613 ret = this->wait(mtd, FL_WRITING); 1614 if (ret) { 1615 printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret); 1616 break; 1617 } 1618 1619 ret = onenand_verify_oob(mtd, oobbuf, to); 1620 if (ret) { 1621 printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret); 1622 break; 1623 } 1624 1625 written += thislen; 1626 if (written == len) 1627 break; 1628 1629 to += mtd->writesize; 1630 buf += thislen; 1631 column = 0; 1632 } 1633 1634 ops->oobretlen = written; 1635 1636 return ret; 1637 } 1638 1639 /** 1640 * onenand_write - [MTD Interface] compability function for onenand_write_ecc 1641 * @param mtd MTD device structure 1642 * @param to offset to write to 1643 * @param len number of bytes to write 1644 * @param retlen pointer to variable to store the number of written bytes 1645 * @param buf the data to write 1646 * 1647 * Write with ECC 1648 */ 1649 int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, 1650 size_t * retlen, const u_char * buf) 1651 { 1652 struct mtd_oob_ops ops = { 1653 .len = len, 1654 .ooblen = 0, 1655 .datbuf = (u_char *) buf, 1656 .oobbuf = NULL, 1657 }; 1658 int ret; 1659 1660 onenand_get_device(mtd, FL_WRITING); 1661 ret = onenand_write_ops_nolock(mtd, to, &ops); 1662 onenand_release_device(mtd); 1663 1664 *retlen = ops.retlen; 1665 return ret; 1666 } 1667 1668 /** 1669 * onenand_write_oob - [MTD Interface] OneNAND write out-of-band 1670 * @param mtd MTD device structure 1671 * @param to offset to write to 1672 * @param ops oob operation description structure 1673 * 1674 * OneNAND write main and/or out-of-band 1675 */ 1676 int onenand_write_oob(struct mtd_info *mtd, loff_t to, 1677 struct mtd_oob_ops *ops) 1678 { 1679 int ret; 1680 1681 switch (ops->mode) { 1682 case MTD_OPS_PLACE_OOB: 1683 case MTD_OPS_AUTO_OOB: 1684 break; 1685 case MTD_OPS_RAW: 1686 /* Not implemented yet */ 1687 default: 1688 return -EINVAL; 1689 } 1690 1691 onenand_get_device(mtd, FL_WRITING); 1692 if (ops->datbuf) 1693 ret = onenand_write_ops_nolock(mtd, to, ops); 1694 else 1695 ret = onenand_write_oob_nolock(mtd, to, ops); 1696 onenand_release_device(mtd); 1697 1698 return ret; 1699 1700 } 1701 1702 /** 1703 * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad 1704 * @param mtd MTD device structure 1705 * @param ofs offset from device start 1706 * @param allowbbt 1, if its allowed to access the bbt area 1707 * 1708 * Check, if the block is bad, Either by reading the bad block table or 1709 * calling of the scan function. 1710 */ 1711 static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt) 1712 { 1713 struct onenand_chip *this = mtd->priv; 1714 struct bbm_info *bbm = this->bbm; 1715 1716 /* Return info from the table */ 1717 return bbm->isbad_bbt(mtd, ofs, allowbbt); 1718 } 1719 1720 1721 /** 1722 * onenand_erase - [MTD Interface] erase block(s) 1723 * @param mtd MTD device structure 1724 * @param instr erase instruction 1725 * 1726 * Erase one ore more blocks 1727 */ 1728 int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) 1729 { 1730 struct onenand_chip *this = mtd->priv; 1731 unsigned int block_size; 1732 loff_t addr = instr->addr; 1733 unsigned int len = instr->len; 1734 int ret = 0, i; 1735 struct mtd_erase_region_info *region = NULL; 1736 unsigned int region_end = 0; 1737 1738 pr_debug("onenand_erase: start = 0x%08x, len = %i\n", 1739 (unsigned int) addr, len); 1740 1741 if (FLEXONENAND(this)) { 1742 /* Find the eraseregion of this address */ 1743 i = flexonenand_region(mtd, addr); 1744 region = &mtd->eraseregions[i]; 1745 1746 block_size = region->erasesize; 1747 region_end = region->offset 1748 + region->erasesize * region->numblocks; 1749 1750 /* Start address within region must align on block boundary. 1751 * Erase region's start offset is always block start address. 1752 */ 1753 if (unlikely((addr - region->offset) & (block_size - 1))) { 1754 pr_debug("onenand_erase:" " Unaligned address\n"); 1755 return -EINVAL; 1756 } 1757 } else { 1758 block_size = 1 << this->erase_shift; 1759 1760 /* Start address must align on block boundary */ 1761 if (unlikely(addr & (block_size - 1))) { 1762 pr_debug("onenand_erase:" "Unaligned address\n"); 1763 return -EINVAL; 1764 } 1765 } 1766 1767 /* Length must align on block boundary */ 1768 if (unlikely(len & (block_size - 1))) { 1769 pr_debug("onenand_erase: Length not block aligned\n"); 1770 return -EINVAL; 1771 } 1772 1773 /* Grab the lock and see if the device is available */ 1774 onenand_get_device(mtd, FL_ERASING); 1775 1776 /* Loop throught the pages */ 1777 instr->state = MTD_ERASING; 1778 1779 while (len) { 1780 1781 /* Check if we have a bad block, we do not erase bad blocks */ 1782 if (instr->priv == 0 && onenand_block_isbad_nolock(mtd, addr, 0)) { 1783 printk(KERN_WARNING "onenand_erase: attempt to erase" 1784 " a bad block at addr 0x%08x\n", 1785 (unsigned int) addr); 1786 instr->state = MTD_ERASE_FAILED; 1787 goto erase_exit; 1788 } 1789 1790 this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); 1791 1792 onenand_invalidate_bufferram(mtd, addr, block_size); 1793 1794 ret = this->wait(mtd, FL_ERASING); 1795 /* Check, if it is write protected */ 1796 if (ret) { 1797 if (ret == -EPERM) 1798 pr_debug("onenand_erase: " 1799 "Device is write protected!!!\n"); 1800 else 1801 pr_debug("onenand_erase: " 1802 "Failed erase, block %d\n", 1803 onenand_block(this, addr)); 1804 instr->state = MTD_ERASE_FAILED; 1805 instr->fail_addr = addr; 1806 1807 goto erase_exit; 1808 } 1809 1810 len -= block_size; 1811 addr += block_size; 1812 1813 if (addr == region_end) { 1814 if (!len) 1815 break; 1816 region++; 1817 1818 block_size = region->erasesize; 1819 region_end = region->offset 1820 + region->erasesize * region->numblocks; 1821 1822 if (len & (block_size - 1)) { 1823 /* This has been checked at MTD 1824 * partitioning level. */ 1825 printk("onenand_erase: Unaligned address\n"); 1826 goto erase_exit; 1827 } 1828 } 1829 } 1830 1831 instr->state = MTD_ERASE_DONE; 1832 1833 erase_exit: 1834 1835 ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; 1836 /* Do call back function */ 1837 if (!ret) 1838 mtd_erase_callback(instr); 1839 1840 /* Deselect and wake up anyone waiting on the device */ 1841 onenand_release_device(mtd); 1842 1843 return ret; 1844 } 1845 1846 /** 1847 * onenand_sync - [MTD Interface] sync 1848 * @param mtd MTD device structure 1849 * 1850 * Sync is actually a wait for chip ready function 1851 */ 1852 void onenand_sync(struct mtd_info *mtd) 1853 { 1854 pr_debug("onenand_sync: called\n"); 1855 1856 /* Grab the lock and see if the device is available */ 1857 onenand_get_device(mtd, FL_SYNCING); 1858 1859 /* Release it and go back */ 1860 onenand_release_device(mtd); 1861 } 1862 1863 /** 1864 * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad 1865 * @param mtd MTD device structure 1866 * @param ofs offset relative to mtd start 1867 * 1868 * Check whether the block is bad 1869 */ 1870 int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) 1871 { 1872 int ret; 1873 1874 /* Check for invalid offset */ 1875 if (ofs > mtd->size) 1876 return -EINVAL; 1877 1878 onenand_get_device(mtd, FL_READING); 1879 ret = onenand_block_isbad_nolock(mtd,ofs, 0); 1880 onenand_release_device(mtd); 1881 return ret; 1882 } 1883 1884 /** 1885 * onenand_default_block_markbad - [DEFAULT] mark a block bad 1886 * @param mtd MTD device structure 1887 * @param ofs offset from device start 1888 * 1889 * This is the default implementation, which can be overridden by 1890 * a hardware specific driver. 1891 */ 1892 static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) 1893 { 1894 struct onenand_chip *this = mtd->priv; 1895 struct bbm_info *bbm = this->bbm; 1896 u_char buf[2] = {0, 0}; 1897 struct mtd_oob_ops ops = { 1898 .mode = MTD_OPS_PLACE_OOB, 1899 .ooblen = 2, 1900 .oobbuf = buf, 1901 .ooboffs = 0, 1902 }; 1903 int block; 1904 1905 /* Get block number */ 1906 block = onenand_block(this, ofs); 1907 if (bbm->bbt) 1908 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); 1909 1910 /* We write two bytes, so we dont have to mess with 16 bit access */ 1911 ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); 1912 return onenand_write_oob_nolock(mtd, ofs, &ops); 1913 } 1914 1915 /** 1916 * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad 1917 * @param mtd MTD device structure 1918 * @param ofs offset relative to mtd start 1919 * 1920 * Mark the block as bad 1921 */ 1922 int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs) 1923 { 1924 struct onenand_chip *this = mtd->priv; 1925 int ret; 1926 1927 ret = onenand_block_isbad(mtd, ofs); 1928 if (ret) { 1929 /* If it was bad already, return success and do nothing */ 1930 if (ret > 0) 1931 return 0; 1932 return ret; 1933 } 1934 1935 onenand_get_device(mtd, FL_WRITING); 1936 ret = this->block_markbad(mtd, ofs); 1937 onenand_release_device(mtd); 1938 1939 return ret; 1940 } 1941 1942 /** 1943 * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s) 1944 * @param mtd MTD device structure 1945 * @param ofs offset relative to mtd start 1946 * @param len number of bytes to lock or unlock 1947 * @param cmd lock or unlock command 1948 * 1949 * Lock or unlock one or more blocks 1950 */ 1951 static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd) 1952 { 1953 struct onenand_chip *this = mtd->priv; 1954 int start, end, block, value, status; 1955 1956 start = onenand_block(this, ofs); 1957 end = onenand_block(this, ofs + len); 1958 1959 /* Continuous lock scheme */ 1960 if (this->options & ONENAND_HAS_CONT_LOCK) { 1961 /* Set start block address */ 1962 this->write_word(start, 1963 this->base + ONENAND_REG_START_BLOCK_ADDRESS); 1964 /* Set end block address */ 1965 this->write_word(end - 1, 1966 this->base + ONENAND_REG_END_BLOCK_ADDRESS); 1967 /* Write unlock command */ 1968 this->command(mtd, cmd, 0, 0); 1969 1970 /* There's no return value */ 1971 this->wait(mtd, FL_UNLOCKING); 1972 1973 /* Sanity check */ 1974 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) 1975 & ONENAND_CTRL_ONGO) 1976 continue; 1977 1978 /* Check lock status */ 1979 status = this->read_word(this->base + ONENAND_REG_WP_STATUS); 1980 if (!(status & ONENAND_WP_US)) 1981 printk(KERN_ERR "wp status = 0x%x\n", status); 1982 1983 return 0; 1984 } 1985 1986 /* Block lock scheme */ 1987 for (block = start; block < end; block++) { 1988 /* Set block address */ 1989 value = onenand_block_address(this, block); 1990 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); 1991 /* Select DataRAM for DDP */ 1992 value = onenand_bufferram_address(this, block); 1993 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); 1994 1995 /* Set start block address */ 1996 this->write_word(block, 1997 this->base + ONENAND_REG_START_BLOCK_ADDRESS); 1998 /* Write unlock command */ 1999 this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); 2000 2001 /* There's no return value */ 2002 this->wait(mtd, FL_UNLOCKING); 2003 2004 /* Sanity check */ 2005 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) 2006 & ONENAND_CTRL_ONGO) 2007 continue; 2008 2009 /* Check lock status */ 2010 status = this->read_word(this->base + ONENAND_REG_WP_STATUS); 2011 if (!(status & ONENAND_WP_US)) 2012 printk(KERN_ERR "block = %d, wp status = 0x%x\n", 2013 block, status); 2014 } 2015 2016 return 0; 2017 } 2018 2019 #ifdef ONENAND_LINUX 2020 /** 2021 * onenand_lock - [MTD Interface] Lock block(s) 2022 * @param mtd MTD device structure 2023 * @param ofs offset relative to mtd start 2024 * @param len number of bytes to unlock 2025 * 2026 * Lock one or more blocks 2027 */ 2028 static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len) 2029 { 2030 int ret; 2031 2032 onenand_get_device(mtd, FL_LOCKING); 2033 ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK); 2034 onenand_release_device(mtd); 2035 return ret; 2036 } 2037 2038 /** 2039 * onenand_unlock - [MTD Interface] Unlock block(s) 2040 * @param mtd MTD device structure 2041 * @param ofs offset relative to mtd start 2042 * @param len number of bytes to unlock 2043 * 2044 * Unlock one or more blocks 2045 */ 2046 static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) 2047 { 2048 int ret; 2049 2050 onenand_get_device(mtd, FL_LOCKING); 2051 ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK); 2052 onenand_release_device(mtd); 2053 return ret; 2054 } 2055 #endif 2056 2057 /** 2058 * onenand_check_lock_status - [OneNAND Interface] Check lock status 2059 * @param this onenand chip data structure 2060 * 2061 * Check lock status 2062 */ 2063 static int onenand_check_lock_status(struct onenand_chip *this) 2064 { 2065 unsigned int value, block, status; 2066 unsigned int end; 2067 2068 end = this->chipsize >> this->erase_shift; 2069 for (block = 0; block < end; block++) { 2070 /* Set block address */ 2071 value = onenand_block_address(this, block); 2072 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); 2073 /* Select DataRAM for DDP */ 2074 value = onenand_bufferram_address(this, block); 2075 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); 2076 /* Set start block address */ 2077 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS); 2078 2079 /* Check lock status */ 2080 status = this->read_word(this->base + ONENAND_REG_WP_STATUS); 2081 if (!(status & ONENAND_WP_US)) { 2082 printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status); 2083 return 0; 2084 } 2085 } 2086 2087 return 1; 2088 } 2089 2090 /** 2091 * onenand_unlock_all - [OneNAND Interface] unlock all blocks 2092 * @param mtd MTD device structure 2093 * 2094 * Unlock all blocks 2095 */ 2096 static void onenand_unlock_all(struct mtd_info *mtd) 2097 { 2098 struct onenand_chip *this = mtd->priv; 2099 loff_t ofs = 0; 2100 size_t len = mtd->size; 2101 2102 if (this->options & ONENAND_HAS_UNLOCK_ALL) { 2103 /* Set start block address */ 2104 this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS); 2105 /* Write unlock command */ 2106 this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0); 2107 2108 /* There's no return value */ 2109 this->wait(mtd, FL_LOCKING); 2110 2111 /* Sanity check */ 2112 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) 2113 & ONENAND_CTRL_ONGO) 2114 continue; 2115 2116 /* Check lock status */ 2117 if (onenand_check_lock_status(this)) 2118 return; 2119 2120 /* Workaround for all block unlock in DDP */ 2121 if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) { 2122 /* All blocks on another chip */ 2123 ofs = this->chipsize >> 1; 2124 len = this->chipsize >> 1; 2125 } 2126 } 2127 2128 onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK); 2129 } 2130 2131 2132 /** 2133 * onenand_check_features - Check and set OneNAND features 2134 * @param mtd MTD data structure 2135 * 2136 * Check and set OneNAND features 2137 * - lock scheme 2138 * - two plane 2139 */ 2140 static void onenand_check_features(struct mtd_info *mtd) 2141 { 2142 struct onenand_chip *this = mtd->priv; 2143 unsigned int density, process; 2144 2145 /* Lock scheme depends on density and process */ 2146 density = onenand_get_density(this->device_id); 2147 process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT; 2148 2149 /* Lock scheme */ 2150 switch (density) { 2151 case ONENAND_DEVICE_DENSITY_4Gb: 2152 if (ONENAND_IS_DDP(this)) 2153 this->options |= ONENAND_HAS_2PLANE; 2154 else 2155 this->options |= ONENAND_HAS_4KB_PAGE; 2156 2157 case ONENAND_DEVICE_DENSITY_2Gb: 2158 /* 2Gb DDP don't have 2 plane */ 2159 if (!ONENAND_IS_DDP(this)) 2160 this->options |= ONENAND_HAS_2PLANE; 2161 this->options |= ONENAND_HAS_UNLOCK_ALL; 2162 2163 case ONENAND_DEVICE_DENSITY_1Gb: 2164 /* A-Die has all block unlock */ 2165 if (process) 2166 this->options |= ONENAND_HAS_UNLOCK_ALL; 2167 break; 2168 2169 default: 2170 /* Some OneNAND has continuous lock scheme */ 2171 if (!process) 2172 this->options |= ONENAND_HAS_CONT_LOCK; 2173 break; 2174 } 2175 2176 if (ONENAND_IS_MLC(this)) 2177 this->options |= ONENAND_HAS_4KB_PAGE; 2178 2179 if (ONENAND_IS_4KB_PAGE(this)) 2180 this->options &= ~ONENAND_HAS_2PLANE; 2181 2182 if (FLEXONENAND(this)) { 2183 this->options &= ~ONENAND_HAS_CONT_LOCK; 2184 this->options |= ONENAND_HAS_UNLOCK_ALL; 2185 } 2186 2187 if (this->options & ONENAND_HAS_CONT_LOCK) 2188 printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); 2189 if (this->options & ONENAND_HAS_UNLOCK_ALL) 2190 printk(KERN_DEBUG "Chip support all block unlock\n"); 2191 if (this->options & ONENAND_HAS_2PLANE) 2192 printk(KERN_DEBUG "Chip has 2 plane\n"); 2193 if (this->options & ONENAND_HAS_4KB_PAGE) 2194 printk(KERN_DEBUG "Chip has 4KiB pagesize\n"); 2195 2196 } 2197 2198 /** 2199 * onenand_print_device_info - Print device ID 2200 * @param device device ID 2201 * 2202 * Print device ID 2203 */ 2204 char *onenand_print_device_info(int device, int version) 2205 { 2206 int vcc, demuxed, ddp, density, flexonenand; 2207 char *dev_info = malloc(80); 2208 char *p = dev_info; 2209 2210 vcc = device & ONENAND_DEVICE_VCC_MASK; 2211 demuxed = device & ONENAND_DEVICE_IS_DEMUX; 2212 ddp = device & ONENAND_DEVICE_IS_DDP; 2213 density = onenand_get_density(device); 2214 flexonenand = device & DEVICE_IS_FLEXONENAND; 2215 p += sprintf(dev_info, "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)", 2216 demuxed ? "" : "Muxed ", 2217 flexonenand ? "Flex-" : "", 2218 ddp ? "(DDP)" : "", 2219 (16 << density), vcc ? "2.65/3.3" : "1.8", device); 2220 2221 sprintf(p, "\nOneNAND version = 0x%04x", version); 2222 printk("%s\n", dev_info); 2223 2224 return dev_info; 2225 } 2226 2227 static const struct onenand_manufacturers onenand_manuf_ids[] = { 2228 {ONENAND_MFR_NUMONYX, "Numonyx"}, 2229 {ONENAND_MFR_SAMSUNG, "Samsung"}, 2230 }; 2231 2232 /** 2233 * onenand_check_maf - Check manufacturer ID 2234 * @param manuf manufacturer ID 2235 * 2236 * Check manufacturer ID 2237 */ 2238 static int onenand_check_maf(int manuf) 2239 { 2240 int size = ARRAY_SIZE(onenand_manuf_ids); 2241 int i; 2242 #ifdef ONENAND_DEBUG 2243 char *name; 2244 #endif 2245 2246 for (i = 0; i < size; i++) 2247 if (manuf == onenand_manuf_ids[i].id) 2248 break; 2249 2250 #ifdef ONENAND_DEBUG 2251 if (i < size) 2252 name = onenand_manuf_ids[i].name; 2253 else 2254 name = "Unknown"; 2255 2256 printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf); 2257 #endif 2258 2259 return i == size; 2260 } 2261 2262 /** 2263 * flexonenand_get_boundary - Reads the SLC boundary 2264 * @param onenand_info - onenand info structure 2265 * 2266 * Fill up boundary[] field in onenand_chip 2267 **/ 2268 static int flexonenand_get_boundary(struct mtd_info *mtd) 2269 { 2270 struct onenand_chip *this = mtd->priv; 2271 unsigned int die, bdry; 2272 int syscfg, locked; 2273 2274 /* Disable ECC */ 2275 syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); 2276 this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1); 2277 2278 for (die = 0; die < this->dies; die++) { 2279 this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); 2280 this->wait(mtd, FL_SYNCING); 2281 2282 this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); 2283 this->wait(mtd, FL_READING); 2284 2285 bdry = this->read_word(this->base + ONENAND_DATARAM); 2286 if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) 2287 locked = 0; 2288 else 2289 locked = 1; 2290 this->boundary[die] = bdry & FLEXONENAND_PI_MASK; 2291 2292 this->command(mtd, ONENAND_CMD_RESET, 0, 0); 2293 this->wait(mtd, FL_RESETING); 2294 2295 printk(KERN_INFO "Die %d boundary: %d%s\n", die, 2296 this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); 2297 } 2298 2299 /* Enable ECC */ 2300 this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); 2301 return 0; 2302 } 2303 2304 /** 2305 * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info 2306 * boundary[], diesize[], mtd->size, mtd->erasesize, 2307 * mtd->eraseregions 2308 * @param mtd - MTD device structure 2309 */ 2310 static void flexonenand_get_size(struct mtd_info *mtd) 2311 { 2312 struct onenand_chip *this = mtd->priv; 2313 int die, i, eraseshift, density; 2314 int blksperdie, maxbdry; 2315 loff_t ofs; 2316 2317 density = onenand_get_density(this->device_id); 2318 blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift); 2319 blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; 2320 maxbdry = blksperdie - 1; 2321 eraseshift = this->erase_shift - 1; 2322 2323 mtd->numeraseregions = this->dies << 1; 2324 2325 /* This fills up the device boundary */ 2326 flexonenand_get_boundary(mtd); 2327 die = 0; 2328 ofs = 0; 2329 i = -1; 2330 for (; die < this->dies; die++) { 2331 if (!die || this->boundary[die-1] != maxbdry) { 2332 i++; 2333 mtd->eraseregions[i].offset = ofs; 2334 mtd->eraseregions[i].erasesize = 1 << eraseshift; 2335 mtd->eraseregions[i].numblocks = 2336 this->boundary[die] + 1; 2337 ofs += mtd->eraseregions[i].numblocks << eraseshift; 2338 eraseshift++; 2339 } else { 2340 mtd->numeraseregions -= 1; 2341 mtd->eraseregions[i].numblocks += 2342 this->boundary[die] + 1; 2343 ofs += (this->boundary[die] + 1) << (eraseshift - 1); 2344 } 2345 if (this->boundary[die] != maxbdry) { 2346 i++; 2347 mtd->eraseregions[i].offset = ofs; 2348 mtd->eraseregions[i].erasesize = 1 << eraseshift; 2349 mtd->eraseregions[i].numblocks = maxbdry ^ 2350 this->boundary[die]; 2351 ofs += mtd->eraseregions[i].numblocks << eraseshift; 2352 eraseshift--; 2353 } else 2354 mtd->numeraseregions -= 1; 2355 } 2356 2357 /* Expose MLC erase size except when all blocks are SLC */ 2358 mtd->erasesize = 1 << this->erase_shift; 2359 if (mtd->numeraseregions == 1) 2360 mtd->erasesize >>= 1; 2361 2362 printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions); 2363 for (i = 0; i < mtd->numeraseregions; i++) 2364 printk(KERN_INFO "[offset: 0x%08llx, erasesize: 0x%05x," 2365 " numblocks: %04u]\n", mtd->eraseregions[i].offset, 2366 mtd->eraseregions[i].erasesize, 2367 mtd->eraseregions[i].numblocks); 2368 2369 for (die = 0, mtd->size = 0; die < this->dies; die++) { 2370 this->diesize[die] = (loff_t) (blksperdie << this->erase_shift); 2371 this->diesize[die] -= (loff_t) (this->boundary[die] + 1) 2372 << (this->erase_shift - 1); 2373 mtd->size += this->diesize[die]; 2374 } 2375 } 2376 2377 /** 2378 * flexonenand_check_blocks_erased - Check if blocks are erased 2379 * @param mtd_info - mtd info structure 2380 * @param start - first erase block to check 2381 * @param end - last erase block to check 2382 * 2383 * Converting an unerased block from MLC to SLC 2384 * causes byte values to change. Since both data and its ECC 2385 * have changed, reads on the block give uncorrectable error. 2386 * This might lead to the block being detected as bad. 2387 * 2388 * Avoid this by ensuring that the block to be converted is 2389 * erased. 2390 */ 2391 static int flexonenand_check_blocks_erased(struct mtd_info *mtd, 2392 int start, int end) 2393 { 2394 struct onenand_chip *this = mtd->priv; 2395 int i, ret; 2396 int block; 2397 struct mtd_oob_ops ops = { 2398 .mode = MTD_OPS_PLACE_OOB, 2399 .ooboffs = 0, 2400 .ooblen = mtd->oobsize, 2401 .datbuf = NULL, 2402 .oobbuf = this->oob_buf, 2403 }; 2404 loff_t addr; 2405 2406 printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end); 2407 2408 for (block = start; block <= end; block++) { 2409 addr = flexonenand_addr(this, block); 2410 if (onenand_block_isbad_nolock(mtd, addr, 0)) 2411 continue; 2412 2413 /* 2414 * Since main area write results in ECC write to spare, 2415 * it is sufficient to check only ECC bytes for change. 2416 */ 2417 ret = onenand_read_oob_nolock(mtd, addr, &ops); 2418 if (ret) 2419 return ret; 2420 2421 for (i = 0; i < mtd->oobsize; i++) 2422 if (this->oob_buf[i] != 0xff) 2423 break; 2424 2425 if (i != mtd->oobsize) { 2426 printk(KERN_WARNING "Block %d not erased.\n", block); 2427 return 1; 2428 } 2429 } 2430 2431 return 0; 2432 } 2433 2434 /** 2435 * flexonenand_set_boundary - Writes the SLC boundary 2436 * @param mtd - mtd info structure 2437 */ 2438 int flexonenand_set_boundary(struct mtd_info *mtd, int die, 2439 int boundary, int lock) 2440 { 2441 struct onenand_chip *this = mtd->priv; 2442 int ret, density, blksperdie, old, new, thisboundary; 2443 loff_t addr; 2444 2445 if (die >= this->dies) 2446 return -EINVAL; 2447 2448 if (boundary == this->boundary[die]) 2449 return 0; 2450 2451 density = onenand_get_density(this->device_id); 2452 blksperdie = ((16 << density) << 20) >> this->erase_shift; 2453 blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; 2454 2455 if (boundary >= blksperdie) { 2456 printk("flexonenand_set_boundary:" 2457 "Invalid boundary value. " 2458 "Boundary not changed.\n"); 2459 return -EINVAL; 2460 } 2461 2462 /* Check if converting blocks are erased */ 2463 old = this->boundary[die] + (die * this->density_mask); 2464 new = boundary + (die * this->density_mask); 2465 ret = flexonenand_check_blocks_erased(mtd, min(old, new) 2466 + 1, max(old, new)); 2467 if (ret) { 2468 printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n"); 2469 return ret; 2470 } 2471 2472 this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); 2473 this->wait(mtd, FL_SYNCING); 2474 2475 /* Check is boundary is locked */ 2476 this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); 2477 ret = this->wait(mtd, FL_READING); 2478 2479 thisboundary = this->read_word(this->base + ONENAND_DATARAM); 2480 if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { 2481 printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n"); 2482 goto out; 2483 } 2484 2485 printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n", 2486 die, boundary, lock ? "(Locked)" : "(Unlocked)"); 2487 2488 boundary &= FLEXONENAND_PI_MASK; 2489 boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT); 2490 2491 addr = die ? this->diesize[0] : 0; 2492 this->command(mtd, ONENAND_CMD_ERASE, addr, 0); 2493 ret = this->wait(mtd, FL_ERASING); 2494 if (ret) { 2495 printk("flexonenand_set_boundary:" 2496 "Failed PI erase for Die %d\n", die); 2497 goto out; 2498 } 2499 2500 this->write_word(boundary, this->base + ONENAND_DATARAM); 2501 this->command(mtd, ONENAND_CMD_PROG, addr, 0); 2502 ret = this->wait(mtd, FL_WRITING); 2503 if (ret) { 2504 printk("flexonenand_set_boundary:" 2505 "Failed PI write for Die %d\n", die); 2506 goto out; 2507 } 2508 2509 this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0); 2510 ret = this->wait(mtd, FL_WRITING); 2511 out: 2512 this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND); 2513 this->wait(mtd, FL_RESETING); 2514 if (!ret) 2515 /* Recalculate device size on boundary change*/ 2516 flexonenand_get_size(mtd); 2517 2518 return ret; 2519 } 2520 2521 /** 2522 * onenand_chip_probe - [OneNAND Interface] Probe the OneNAND chip 2523 * @param mtd MTD device structure 2524 * 2525 * OneNAND detection method: 2526 * Compare the the values from command with ones from register 2527 */ 2528 static int onenand_chip_probe(struct mtd_info *mtd) 2529 { 2530 struct onenand_chip *this = mtd->priv; 2531 int bram_maf_id, bram_dev_id, maf_id, dev_id; 2532 int syscfg; 2533 2534 /* Save system configuration 1 */ 2535 syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); 2536 2537 /* Clear Sync. Burst Read mode to read BootRAM */ 2538 this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ), 2539 this->base + ONENAND_REG_SYS_CFG1); 2540 2541 /* Send the command for reading device ID from BootRAM */ 2542 this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); 2543 2544 /* Read manufacturer and device IDs from BootRAM */ 2545 bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0); 2546 bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2); 2547 2548 /* Reset OneNAND to read default register values */ 2549 this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM); 2550 2551 /* Wait reset */ 2552 if (this->wait(mtd, FL_RESETING)) 2553 return -ENXIO; 2554 2555 /* Restore system configuration 1 */ 2556 this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); 2557 2558 /* Check manufacturer ID */ 2559 if (onenand_check_maf(bram_maf_id)) 2560 return -ENXIO; 2561 2562 /* Read manufacturer and device IDs from Register */ 2563 maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); 2564 dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); 2565 2566 /* Check OneNAND device */ 2567 if (maf_id != bram_maf_id || dev_id != bram_dev_id) 2568 return -ENXIO; 2569 2570 return 0; 2571 } 2572 2573 /** 2574 * onenand_probe - [OneNAND Interface] Probe the OneNAND device 2575 * @param mtd MTD device structure 2576 * 2577 * OneNAND detection method: 2578 * Compare the the values from command with ones from register 2579 */ 2580 int onenand_probe(struct mtd_info *mtd) 2581 { 2582 struct onenand_chip *this = mtd->priv; 2583 int dev_id, ver_id; 2584 int density; 2585 int ret; 2586 2587 ret = this->chip_probe(mtd); 2588 if (ret) 2589 return ret; 2590 2591 /* Read device IDs from Register */ 2592 dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); 2593 ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); 2594 this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); 2595 2596 /* Flash device information */ 2597 mtd->name = onenand_print_device_info(dev_id, ver_id); 2598 this->device_id = dev_id; 2599 this->version_id = ver_id; 2600 2601 /* Check OneNAND features */ 2602 onenand_check_features(mtd); 2603 2604 density = onenand_get_density(dev_id); 2605 if (FLEXONENAND(this)) { 2606 this->dies = ONENAND_IS_DDP(this) ? 2 : 1; 2607 /* Maximum possible erase regions */ 2608 mtd->numeraseregions = this->dies << 1; 2609 mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info) 2610 * (this->dies << 1)); 2611 if (!mtd->eraseregions) 2612 return -ENOMEM; 2613 } 2614 2615 /* 2616 * For Flex-OneNAND, chipsize represents maximum possible device size. 2617 * mtd->size represents the actual device size. 2618 */ 2619 this->chipsize = (16 << density) << 20; 2620 2621 /* OneNAND page size & block size */ 2622 /* The data buffer size is equal to page size */ 2623 mtd->writesize = 2624 this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); 2625 /* We use the full BufferRAM */ 2626 if (ONENAND_IS_4KB_PAGE(this)) 2627 mtd->writesize <<= 1; 2628 2629 mtd->oobsize = mtd->writesize >> 5; 2630 /* Pagers per block is always 64 in OneNAND */ 2631 mtd->erasesize = mtd->writesize << 6; 2632 /* 2633 * Flex-OneNAND SLC area has 64 pages per block. 2634 * Flex-OneNAND MLC area has 128 pages per block. 2635 * Expose MLC erase size to find erase_shift and page_mask. 2636 */ 2637 if (FLEXONENAND(this)) 2638 mtd->erasesize <<= 1; 2639 2640 this->erase_shift = ffs(mtd->erasesize) - 1; 2641 this->page_shift = ffs(mtd->writesize) - 1; 2642 this->ppb_shift = (this->erase_shift - this->page_shift); 2643 this->page_mask = (mtd->erasesize / mtd->writesize) - 1; 2644 /* Set density mask. it is used for DDP */ 2645 if (ONENAND_IS_DDP(this)) 2646 this->density_mask = this->chipsize >> (this->erase_shift + 1); 2647 /* It's real page size */ 2648 this->writesize = mtd->writesize; 2649 2650 /* REVIST: Multichip handling */ 2651 2652 if (FLEXONENAND(this)) 2653 flexonenand_get_size(mtd); 2654 else 2655 mtd->size = this->chipsize; 2656 2657 mtd->flags = MTD_CAP_NANDFLASH; 2658 mtd->_erase = onenand_erase; 2659 mtd->_read_oob = onenand_read_oob; 2660 mtd->_write_oob = onenand_write_oob; 2661 mtd->_sync = onenand_sync; 2662 mtd->_block_isbad = onenand_block_isbad; 2663 mtd->_block_markbad = onenand_block_markbad; 2664 mtd->writebufsize = mtd->writesize; 2665 2666 return 0; 2667 } 2668 2669 /** 2670 * onenand_scan - [OneNAND Interface] Scan for the OneNAND device 2671 * @param mtd MTD device structure 2672 * @param maxchips Number of chips to scan for 2673 * 2674 * This fills out all the not initialized function pointers 2675 * with the defaults. 2676 * The flash ID is read and the mtd/chip structures are 2677 * filled with the appropriate values. 2678 */ 2679 int onenand_scan(struct mtd_info *mtd, int maxchips) 2680 { 2681 int i; 2682 struct onenand_chip *this = mtd->priv; 2683 2684 if (!this->read_word) 2685 this->read_word = onenand_readw; 2686 if (!this->write_word) 2687 this->write_word = onenand_writew; 2688 2689 if (!this->command) 2690 this->command = onenand_command; 2691 if (!this->wait) 2692 this->wait = onenand_wait; 2693 if (!this->bbt_wait) 2694 this->bbt_wait = onenand_bbt_wait; 2695 2696 if (!this->read_bufferram) 2697 this->read_bufferram = onenand_read_bufferram; 2698 if (!this->write_bufferram) 2699 this->write_bufferram = onenand_write_bufferram; 2700 2701 if (!this->chip_probe) 2702 this->chip_probe = onenand_chip_probe; 2703 2704 if (!this->block_markbad) 2705 this->block_markbad = onenand_default_block_markbad; 2706 if (!this->scan_bbt) 2707 this->scan_bbt = onenand_default_bbt; 2708 2709 if (onenand_probe(mtd)) 2710 return -ENXIO; 2711 2712 /* Set Sync. Burst Read after probing */ 2713 if (this->mmcontrol) { 2714 printk(KERN_INFO "OneNAND Sync. Burst Read support\n"); 2715 this->read_bufferram = onenand_sync_read_bufferram; 2716 } 2717 2718 /* Allocate buffers, if necessary */ 2719 if (!this->page_buf) { 2720 this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL); 2721 if (!this->page_buf) { 2722 printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n"); 2723 return -ENOMEM; 2724 } 2725 this->options |= ONENAND_PAGEBUF_ALLOC; 2726 } 2727 if (!this->oob_buf) { 2728 this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL); 2729 if (!this->oob_buf) { 2730 printk(KERN_ERR "onenand_scan: Can't allocate oob_buf\n"); 2731 if (this->options & ONENAND_PAGEBUF_ALLOC) { 2732 this->options &= ~ONENAND_PAGEBUF_ALLOC; 2733 kfree(this->page_buf); 2734 } 2735 return -ENOMEM; 2736 } 2737 this->options |= ONENAND_OOBBUF_ALLOC; 2738 } 2739 2740 this->state = FL_READY; 2741 2742 /* 2743 * Allow subpage writes up to oobsize. 2744 */ 2745 switch (mtd->oobsize) { 2746 case 128: 2747 this->ecclayout = &onenand_oob_128; 2748 mtd->subpage_sft = 0; 2749 break; 2750 2751 case 64: 2752 this->ecclayout = &onenand_oob_64; 2753 mtd->subpage_sft = 2; 2754 break; 2755 2756 case 32: 2757 this->ecclayout = &onenand_oob_32; 2758 mtd->subpage_sft = 1; 2759 break; 2760 2761 default: 2762 printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n", 2763 mtd->oobsize); 2764 mtd->subpage_sft = 0; 2765 /* To prevent kernel oops */ 2766 this->ecclayout = &onenand_oob_32; 2767 break; 2768 } 2769 2770 this->subpagesize = mtd->writesize >> mtd->subpage_sft; 2771 2772 /* 2773 * The number of bytes available for a client to place data into 2774 * the out of band area 2775 */ 2776 this->ecclayout->oobavail = 0; 2777 2778 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && 2779 this->ecclayout->oobfree[i].length; i++) 2780 this->ecclayout->oobavail += 2781 this->ecclayout->oobfree[i].length; 2782 mtd->oobavail = this->ecclayout->oobavail; 2783 2784 mtd->ecclayout = this->ecclayout; 2785 2786 /* Unlock whole block */ 2787 onenand_unlock_all(mtd); 2788 2789 return this->scan_bbt(mtd); 2790 } 2791 2792 /** 2793 * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device 2794 * @param mtd MTD device structure 2795 */ 2796 void onenand_release(struct mtd_info *mtd) 2797 { 2798 } 2799