1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine 4 * 5 * (C) Copyright 2006-2008 6 * Stefan Roese, DENX Software Engineering, sr@denx.de. 7 * 8 * Copyright (c) 2008 Freescale Semiconductor, Inc. 9 * Author: Scott Wood <scottwood@freescale.com> 10 */ 11 12 #include <common.h> 13 #include <asm/io.h> 14 #include <asm/fsl_lbc.h> 15 #include <nand.h> 16 17 #define WINDOW_SIZE 8192 18 19 static void nand_wait(void) 20 { 21 fsl_lbc_t *regs = LBC_BASE_ADDR; 22 23 for (;;) { 24 uint32_t status = in_be32(®s->ltesr); 25 26 if (status == 1) 27 return; 28 29 if (status & 1) { 30 puts("read failed (ltesr)\n"); 31 for (;;); 32 } 33 } 34 } 35 36 #ifdef CONFIG_TPL_BUILD 37 int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) 38 #else 39 static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) 40 #endif 41 { 42 fsl_lbc_t *regs = LBC_BASE_ADDR; 43 uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; 44 const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS; 45 const int block_shift = large ? 17 : 14; 46 const int block_size = 1 << block_shift; 47 const int page_size = large ? 2048 : 512; 48 const int bad_marker = large ? page_size + 0 : page_size + 5; 49 int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; 50 int pos = 0; 51 char *dst = vdst; 52 53 if (offs & (block_size - 1)) { 54 puts("bad offset\n"); 55 for (;;); 56 } 57 58 if (large) { 59 fmr |= FMR_ECCM; 60 out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | 61 (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); 62 out_be32(®s->fir, 63 (FIR_OP_CW0 << FIR_OP0_SHIFT) | 64 (FIR_OP_CA << FIR_OP1_SHIFT) | 65 (FIR_OP_PA << FIR_OP2_SHIFT) | 66 (FIR_OP_CW1 << FIR_OP3_SHIFT) | 67 (FIR_OP_RBW << FIR_OP4_SHIFT)); 68 } else { 69 out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); 70 out_be32(®s->fir, 71 (FIR_OP_CW0 << FIR_OP0_SHIFT) | 72 (FIR_OP_CA << FIR_OP1_SHIFT) | 73 (FIR_OP_PA << FIR_OP2_SHIFT) | 74 (FIR_OP_RBW << FIR_OP3_SHIFT)); 75 } 76 77 out_be32(®s->fbcr, 0); 78 clrsetbits_be32(®s->bank[0].br, BR_DECC, BR_DECC_CHK_GEN); 79 80 while (pos < uboot_size) { 81 int i = 0; 82 out_be32(®s->fbar, offs >> block_shift); 83 84 do { 85 int j; 86 unsigned int page_offs = (offs & (block_size - 1)) << 1; 87 88 out_be32(®s->ltesr, ~0); 89 out_be32(®s->lteatr, 0); 90 out_be32(®s->fpar, page_offs); 91 out_be32(®s->fmr, fmr); 92 out_be32(®s->lsor, 0); 93 nand_wait(); 94 95 page_offs %= WINDOW_SIZE; 96 97 /* 98 * If either of the first two pages are marked bad, 99 * continue to the next block. 100 */ 101 if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) { 102 puts("skipping\n"); 103 offs = (offs + block_size) & ~(block_size - 1); 104 pos &= ~(block_size - 1); 105 break; 106 } 107 108 for (j = 0; j < page_size; j++) 109 dst[pos + j] = buf[page_offs + j]; 110 111 pos += page_size; 112 offs += page_size; 113 } while ((offs & (block_size - 1)) && (pos < uboot_size)); 114 } 115 116 return 0; 117 } 118 119 /* 120 * Defines a static function nand_load_image() here, because non-static makes 121 * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) 122 */ 123 #ifndef CONFIG_TPL_BUILD 124 #define nand_spl_load_image(offs, uboot_size, vdst) \ 125 nand_load_image(offs, uboot_size, vdst) 126 #endif 127 128 /* 129 * The main entry for NAND booting. It's necessary that SDRAM is already 130 * configured and available since this code loads the main U-Boot image 131 * from NAND into SDRAM and starts it from there. 132 */ 133 void nand_boot(void) 134 { 135 __attribute__((noreturn)) void (*uboot)(void); 136 /* 137 * Load U-Boot image from NAND into RAM 138 */ 139 nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, 140 CONFIG_SYS_NAND_U_BOOT_SIZE, 141 (void *)CONFIG_SYS_NAND_U_BOOT_DST); 142 143 #ifdef CONFIG_NAND_ENV_DST 144 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, 145 (void *)CONFIG_NAND_ENV_DST); 146 147 #ifdef CONFIG_ENV_OFFSET_REDUND 148 nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, 149 (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); 150 #endif 151 #endif 152 153 #ifdef CONFIG_SPL_FLUSH_IMAGE 154 /* 155 * Clean d-cache and invalidate i-cache, to 156 * make sure that no stale data is executed. 157 */ 158 flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); 159 #endif 160 161 puts("transfering control\n"); 162 /* 163 * Jump to U-Boot image 164 */ 165 uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; 166 (*uboot)(); 167 } 168