1 /* 2 * (C) Copyright 2007 3 * Michael Schwingen, <michael@schwingen.org> 4 * 5 * based in great part on jedec_probe.c from linux kernel: 6 * (C) 2000 Red Hat. GPL'd. 7 * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 * 27 */ 28 29 /* The DEBUG define must be before common to enable debugging */ 30 /*#define DEBUG*/ 31 32 #include <common.h> 33 #include <asm/processor.h> 34 #include <asm/io.h> 35 #include <asm/byteorder.h> 36 #include <environment.h> 37 38 #define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY 39 40 /* Manufacturers */ 41 #define MANUFACTURER_AMD 0x0001 42 #define MANUFACTURER_SST 0x00BF 43 44 /* AMD */ 45 #define AM29DL800BB 0x22CB 46 #define AM29DL800BT 0x224A 47 48 #define AM29F800BB 0x2258 49 #define AM29F800BT 0x22D6 50 #define AM29LV400BB 0x22BA 51 #define AM29LV400BT 0x22B9 52 #define AM29LV800BB 0x225B 53 #define AM29LV800BT 0x22DA 54 #define AM29LV160DT 0x22C4 55 #define AM29LV160DB 0x2249 56 #define AM29F017D 0x003D 57 #define AM29F016D 0x00AD 58 #define AM29F080 0x00D5 59 #define AM29F040 0x00A4 60 #define AM29LV040B 0x004F 61 #define AM29F032B 0x0041 62 #define AM29F002T 0x00B0 63 64 /* SST */ 65 #define SST39LF800 0x2781 66 #define SST39LF160 0x2782 67 #define SST39VF1601 0x234b 68 #define SST39LF512 0x00D4 69 #define SST39LF010 0x00D5 70 #define SST39LF020 0x00D6 71 #define SST39LF040 0x00D7 72 #define SST39SF010A 0x00B5 73 #define SST39SF020A 0x00B6 74 75 76 /* 77 * Unlock address sets for AMD command sets. 78 * Intel command sets use the MTD_UADDR_UNNECESSARY. 79 * Each identifier, except MTD_UADDR_UNNECESSARY, and 80 * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[]. 81 * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure 82 * initialization need not require initializing all of the 83 * unlock addresses for all bit widths. 84 */ 85 enum uaddr { 86 MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */ 87 MTD_UADDR_0x0555_0x02AA, 88 MTD_UADDR_0x0555_0x0AAA, 89 MTD_UADDR_0x5555_0x2AAA, 90 MTD_UADDR_0x0AAA_0x0555, 91 MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ 92 MTD_UADDR_UNNECESSARY, /* Does not require any address */ 93 }; 94 95 96 struct unlock_addr { 97 u32 addr1; 98 u32 addr2; 99 }; 100 101 102 /* 103 * I don't like the fact that the first entry in unlock_addrs[] 104 * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, 105 * should not be used. The problem is that structures with 106 * initializers have extra fields initialized to 0. It is _very_ 107 * desireable to have the unlock address entries for unsupported 108 * data widths automatically initialized - that means that 109 * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here 110 * must go unused. 111 */ 112 static const struct unlock_addr unlock_addrs[] = { 113 [MTD_UADDR_NOT_SUPPORTED] = { 114 .addr1 = 0xffff, 115 .addr2 = 0xffff 116 }, 117 118 [MTD_UADDR_0x0555_0x02AA] = { 119 .addr1 = 0x0555, 120 .addr2 = 0x02aa 121 }, 122 123 [MTD_UADDR_0x0555_0x0AAA] = { 124 .addr1 = 0x0555, 125 .addr2 = 0x0aaa 126 }, 127 128 [MTD_UADDR_0x5555_0x2AAA] = { 129 .addr1 = 0x5555, 130 .addr2 = 0x2aaa 131 }, 132 133 [MTD_UADDR_0x0AAA_0x0555] = { 134 .addr1 = 0x0AAA, 135 .addr2 = 0x0555 136 }, 137 138 [MTD_UADDR_DONT_CARE] = { 139 .addr1 = 0x0000, /* Doesn't matter which address */ 140 .addr2 = 0x0000 /* is used - must be last entry */ 141 }, 142 143 [MTD_UADDR_UNNECESSARY] = { 144 .addr1 = 0x0000, 145 .addr2 = 0x0000 146 } 147 }; 148 149 150 struct amd_flash_info { 151 const __u16 mfr_id; 152 const __u16 dev_id; 153 const char *name; 154 const int DevSize; 155 const int NumEraseRegions; 156 const int CmdSet; 157 const __u8 uaddr[4]; /* unlock addrs for 8, 16, 32, 64 */ 158 const ulong regions[6]; 159 }; 160 161 #define ERASEINFO(size,blocks) (size<<8)|(blocks-1) 162 163 #define SIZE_64KiB 16 164 #define SIZE_128KiB 17 165 #define SIZE_256KiB 18 166 #define SIZE_512KiB 19 167 #define SIZE_1MiB 20 168 #define SIZE_2MiB 21 169 #define SIZE_4MiB 22 170 #define SIZE_8MiB 23 171 172 static const struct amd_flash_info jedec_table[] = { 173 #ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8 174 { 175 .mfr_id = MANUFACTURER_SST, 176 .dev_id = SST39LF020, 177 .name = "SST 39LF020", 178 .uaddr = { 179 [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */ 180 }, 181 .DevSize = SIZE_256KiB, 182 .CmdSet = P_ID_AMD_STD, 183 .NumEraseRegions= 1, 184 .regions = { 185 ERASEINFO(0x01000,64), 186 } 187 }, 188 #endif 189 #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8 190 { 191 .mfr_id = MANUFACTURER_AMD, 192 .dev_id = AM29LV040B, 193 .name = "AMD AM29LV040B", 194 .uaddr = { 195 [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ 196 }, 197 .DevSize = SIZE_512KiB, 198 .CmdSet = P_ID_AMD_STD, 199 .NumEraseRegions= 1, 200 .regions = { 201 ERASEINFO(0x10000,8), 202 } 203 }, 204 { 205 .mfr_id = MANUFACTURER_SST, 206 .dev_id = SST39LF040, 207 .name = "SST 39LF040", 208 .uaddr = { 209 [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */ 210 }, 211 .DevSize = SIZE_512KiB, 212 .CmdSet = P_ID_AMD_STD, 213 .NumEraseRegions= 1, 214 .regions = { 215 ERASEINFO(0x01000,128), 216 } 217 }, 218 #endif 219 #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16 220 { 221 .mfr_id = MANUFACTURER_AMD, 222 .dev_id = AM29LV400BB, 223 .name = "AMD AM29LV400BB", 224 .uaddr = { 225 [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ 226 }, 227 .DevSize = SIZE_512KiB, 228 .CmdSet = CFI_CMDSET_AMD_LEGACY, 229 .NumEraseRegions= 4, 230 .regions = { 231 ERASEINFO(0x04000,1), 232 ERASEINFO(0x02000,2), 233 ERASEINFO(0x08000,1), 234 ERASEINFO(0x10000,7), 235 } 236 }, 237 { 238 .mfr_id = MANUFACTURER_AMD, 239 .dev_id = AM29LV800BB, 240 .name = "AMD AM29LV800BB", 241 .uaddr = { 242 [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ 243 }, 244 .DevSize = SIZE_1MiB, 245 .CmdSet = CFI_CMDSET_AMD_LEGACY, 246 .NumEraseRegions= 4, 247 .regions = { 248 ERASEINFO(0x04000, 1), 249 ERASEINFO(0x02000, 2), 250 ERASEINFO(0x08000, 1), 251 ERASEINFO(0x10000, 15), 252 } 253 }, 254 #endif 255 }; 256 257 static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) 258 { 259 int i,j; 260 int sect_cnt; 261 int size_ratio; 262 int total_size; 263 enum uaddr uaddr_idx; 264 265 size_ratio = info->portwidth / info->chipwidth; 266 267 debug("Found JEDEC Flash: %s\n", jedec_entry->name); 268 info->vendor = jedec_entry->CmdSet; 269 /* Todo: do we need device-specific timeouts? */ 270 info->erase_blk_tout = 30000; 271 info->buffer_write_tout = 1000; 272 info->write_tout = 100; 273 info->name = jedec_entry->name; 274 275 /* copy unlock addresses from device table to CFI info struct. This 276 is just here because the addresses are in the table anyway - if 277 the flash is not detected due to wrong unlock addresses, 278 flash_detect_legacy would have to try all of them before we even 279 get here. */ 280 switch(info->chipwidth) { 281 case FLASH_CFI_8BIT: 282 uaddr_idx = jedec_entry->uaddr[0]; 283 break; 284 case FLASH_CFI_16BIT: 285 uaddr_idx = jedec_entry->uaddr[1]; 286 break; 287 case FLASH_CFI_32BIT: 288 uaddr_idx = jedec_entry->uaddr[2]; 289 break; 290 default: 291 uaddr_idx = MTD_UADDR_NOT_SUPPORTED; 292 break; 293 } 294 295 debug("unlock address index %d\n", uaddr_idx); 296 info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1; 297 info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2; 298 debug("unlock addresses are 0x%x/0x%x\n", info->addr_unlock1, info->addr_unlock2); 299 300 sect_cnt = 0; 301 total_size = 0; 302 for (i = 0; i < jedec_entry->NumEraseRegions; i++) { 303 ulong erase_region_size = jedec_entry->regions[i] >> 8; 304 ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1; 305 306 total_size += erase_region_size * erase_region_count; 307 debug ("erase_region_count = %d erase_region_size = %d\n", 308 erase_region_count, erase_region_size); 309 for (j = 0; j < erase_region_count; j++) { 310 if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { 311 printf("ERROR: too many flash sectors\n"); 312 break; 313 } 314 info->start[sect_cnt] = base; 315 base += (erase_region_size * size_ratio); 316 sect_cnt++; 317 } 318 } 319 info->sector_count = sect_cnt; 320 info->size = total_size * size_ratio; 321 } 322 323 /*----------------------------------------------------------------------- 324 * match jedec ids against table. If a match is found, fill flash_info entry 325 */ 326 int jedec_flash_match(flash_info_t *info, ulong base) 327 { 328 int ret = 0; 329 int i; 330 ulong mask = 0xFFFF; 331 if (info->chipwidth == 1) 332 mask = 0xFF; 333 334 for (i = 0; i < ARRAY_SIZE(jedec_table); i++) { 335 if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) && 336 (jedec_table[i].dev_id & mask) == (info->device_id & mask)) { 337 fill_info(info, &jedec_table[i], base); 338 ret = 1; 339 break; 340 } 341 } 342 return ret; 343 } 344