1 /* 2 * (C) Copyright 2002-2004 3 * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com 4 * 5 * Copyright (C) 2003 Arabella Software Ltd. 6 * Yuli Barcohen <yuli@arabellasw.com> 7 * 8 * Copyright (C) 2004 9 * Ed Okerson 10 * 11 * Copyright (C) 2006 12 * Tolunay Orkun <listmember@orkun.us> 13 * 14 * See file CREDITS for list of people who contributed to this 15 * project. 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License as 19 * published by the Free Software Foundation; either version 2 of 20 * the License, or (at your option) any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 * You should have received a copy of the GNU General Public License 28 * along with this program; if not, write to the Free Software 29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 30 * MA 02111-1307 USA 31 * 32 */ 33 34 /* The DEBUG define must be before common to enable debugging */ 35 /* #define DEBUG */ 36 37 #include <common.h> 38 #include <asm/processor.h> 39 #include <asm/io.h> 40 #include <asm/byteorder.h> 41 #include <environment.h> 42 #include <mtd/cfi_flash.h> 43 #include <watchdog.h> 44 45 /* 46 * This file implements a Common Flash Interface (CFI) driver for 47 * U-Boot. 48 * 49 * The width of the port and the width of the chips are determined at 50 * initialization. These widths are used to calculate the address for 51 * access CFI data structures. 52 * 53 * References 54 * JEDEC Standard JESD68 - Common Flash Interface (CFI) 55 * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes 56 * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets 57 * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet 58 * AMD CFI Specification, Release 2.0 December 1, 2001 59 * AMD/Spansion Application Note: Migration from Single-byte to Three-byte 60 * Device IDs, Publication Number 25538 Revision A, November 8, 2001 61 * 62 * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between 63 * reading and writing ... (yes there is such a Hardware). 64 */ 65 66 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT }; 67 #ifdef CONFIG_FLASH_CFI_MTD 68 static uint flash_verbose = 1; 69 #else 70 #define flash_verbose 1 71 #endif 72 73 flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */ 74 75 /* 76 * Check if chip width is defined. If not, start detecting with 8bit. 77 */ 78 #ifndef CONFIG_SYS_FLASH_CFI_WIDTH 79 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT 80 #endif 81 82 /* 83 * 0xffff is an undefined value for the configuration register. When 84 * this value is returned, the configuration register shall not be 85 * written at all (default mode). 86 */ 87 static u16 cfi_flash_config_reg(int i) 88 { 89 #ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS 90 return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i]; 91 #else 92 return 0xffff; 93 #endif 94 } 95 96 #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) 97 int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT; 98 #endif 99 100 static phys_addr_t __cfi_flash_bank_addr(int i) 101 { 102 return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i]; 103 } 104 phys_addr_t cfi_flash_bank_addr(int i) 105 __attribute__((weak, alias("__cfi_flash_bank_addr"))); 106 107 static unsigned long __cfi_flash_bank_size(int i) 108 { 109 #ifdef CONFIG_SYS_FLASH_BANKS_SIZES 110 return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; 111 #else 112 return 0; 113 #endif 114 } 115 unsigned long cfi_flash_bank_size(int i) 116 __attribute__((weak, alias("__cfi_flash_bank_size"))); 117 118 static void __flash_write8(u8 value, void *addr) 119 { 120 __raw_writeb(value, addr); 121 } 122 123 static void __flash_write16(u16 value, void *addr) 124 { 125 __raw_writew(value, addr); 126 } 127 128 static void __flash_write32(u32 value, void *addr) 129 { 130 __raw_writel(value, addr); 131 } 132 133 static void __flash_write64(u64 value, void *addr) 134 { 135 /* No architectures currently implement __raw_writeq() */ 136 *(volatile u64 *)addr = value; 137 } 138 139 static u8 __flash_read8(void *addr) 140 { 141 return __raw_readb(addr); 142 } 143 144 static u16 __flash_read16(void *addr) 145 { 146 return __raw_readw(addr); 147 } 148 149 static u32 __flash_read32(void *addr) 150 { 151 return __raw_readl(addr); 152 } 153 154 static u64 __flash_read64(void *addr) 155 { 156 /* No architectures currently implement __raw_readq() */ 157 return *(volatile u64 *)addr; 158 } 159 160 #ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 161 void flash_write8(u8 value, void *addr)__attribute__((weak, alias("__flash_write8"))); 162 void flash_write16(u16 value, void *addr)__attribute__((weak, alias("__flash_write16"))); 163 void flash_write32(u32 value, void *addr)__attribute__((weak, alias("__flash_write32"))); 164 void flash_write64(u64 value, void *addr)__attribute__((weak, alias("__flash_write64"))); 165 u8 flash_read8(void *addr)__attribute__((weak, alias("__flash_read8"))); 166 u16 flash_read16(void *addr)__attribute__((weak, alias("__flash_read16"))); 167 u32 flash_read32(void *addr)__attribute__((weak, alias("__flash_read32"))); 168 u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); 169 #else 170 #define flash_write8 __flash_write8 171 #define flash_write16 __flash_write16 172 #define flash_write32 __flash_write32 173 #define flash_write64 __flash_write64 174 #define flash_read8 __flash_read8 175 #define flash_read16 __flash_read16 176 #define flash_read32 __flash_read32 177 #define flash_read64 __flash_read64 178 #endif 179 180 /*----------------------------------------------------------------------- 181 */ 182 #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) 183 flash_info_t *flash_get_info(ulong base) 184 { 185 int i; 186 flash_info_t *info = NULL; 187 188 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { 189 info = & flash_info[i]; 190 if (info->size && info->start[0] <= base && 191 base <= info->start[0] + info->size - 1) 192 break; 193 } 194 195 return info; 196 } 197 #endif 198 199 unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect) 200 { 201 if (sect != (info->sector_count - 1)) 202 return info->start[sect + 1] - info->start[sect]; 203 else 204 return info->start[0] + info->size - info->start[sect]; 205 } 206 207 /*----------------------------------------------------------------------- 208 * create an address based on the offset and the port width 209 */ 210 static inline void * 211 flash_map (flash_info_t * info, flash_sect_t sect, uint offset) 212 { 213 unsigned int byte_offset = offset * info->portwidth; 214 215 return (void *)(info->start[sect] + byte_offset); 216 } 217 218 static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, 219 unsigned int offset, void *addr) 220 { 221 } 222 223 /*----------------------------------------------------------------------- 224 * make a proper sized command based on the port and chip widths 225 */ 226 static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) 227 { 228 int i; 229 int cword_offset; 230 int cp_offset; 231 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 232 u32 cmd_le = cpu_to_le32(cmd); 233 #endif 234 uchar val; 235 uchar *cp = (uchar *) cmdbuf; 236 237 for (i = info->portwidth; i > 0; i--){ 238 cword_offset = (info->portwidth-i)%info->chipwidth; 239 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 240 cp_offset = info->portwidth - i; 241 val = *((uchar*)&cmd_le + cword_offset); 242 #else 243 cp_offset = i - 1; 244 val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1); 245 #endif 246 cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val; 247 } 248 } 249 250 #ifdef DEBUG 251 /*----------------------------------------------------------------------- 252 * Debug support 253 */ 254 static void print_longlong (char *str, unsigned long long data) 255 { 256 int i; 257 char *cp; 258 259 cp = (char *) &data; 260 for (i = 0; i < 8; i++) 261 sprintf (&str[i * 2], "%2.2x", *cp++); 262 } 263 264 static void flash_printqry (struct cfi_qry *qry) 265 { 266 u8 *p = (u8 *)qry; 267 int x, y; 268 269 for (x = 0; x < sizeof(struct cfi_qry); x += 16) { 270 debug("%02x : ", x); 271 for (y = 0; y < 16; y++) 272 debug("%2.2x ", p[x + y]); 273 debug(" "); 274 for (y = 0; y < 16; y++) { 275 unsigned char c = p[x + y]; 276 if (c >= 0x20 && c <= 0x7e) 277 debug("%c", c); 278 else 279 debug("."); 280 } 281 debug("\n"); 282 } 283 } 284 #endif 285 286 287 /*----------------------------------------------------------------------- 288 * read a character at a port width address 289 */ 290 static inline uchar flash_read_uchar (flash_info_t * info, uint offset) 291 { 292 uchar *cp; 293 uchar retval; 294 295 cp = flash_map (info, 0, offset); 296 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 297 retval = flash_read8(cp); 298 #else 299 retval = flash_read8(cp + info->portwidth - 1); 300 #endif 301 flash_unmap (info, 0, offset, cp); 302 return retval; 303 } 304 305 /*----------------------------------------------------------------------- 306 * read a word at a port width address, assume 16bit bus 307 */ 308 static inline ushort flash_read_word (flash_info_t * info, uint offset) 309 { 310 ushort *addr, retval; 311 312 addr = flash_map (info, 0, offset); 313 retval = flash_read16 (addr); 314 flash_unmap (info, 0, offset, addr); 315 return retval; 316 } 317 318 319 /*----------------------------------------------------------------------- 320 * read a long word by picking the least significant byte of each maximum 321 * port size word. Swap for ppc format. 322 */ 323 static ulong flash_read_long (flash_info_t * info, flash_sect_t sect, 324 uint offset) 325 { 326 uchar *addr; 327 ulong retval; 328 329 #ifdef DEBUG 330 int x; 331 #endif 332 addr = flash_map (info, sect, offset); 333 334 #ifdef DEBUG 335 debug ("long addr is at %p info->portwidth = %d\n", addr, 336 info->portwidth); 337 for (x = 0; x < 4 * info->portwidth; x++) { 338 debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x)); 339 } 340 #endif 341 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 342 retval = ((flash_read8(addr) << 16) | 343 (flash_read8(addr + info->portwidth) << 24) | 344 (flash_read8(addr + 2 * info->portwidth)) | 345 (flash_read8(addr + 3 * info->portwidth) << 8)); 346 #else 347 retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) | 348 (flash_read8(addr + info->portwidth - 1) << 16) | 349 (flash_read8(addr + 4 * info->portwidth - 1) << 8) | 350 (flash_read8(addr + 3 * info->portwidth - 1))); 351 #endif 352 flash_unmap(info, sect, offset, addr); 353 354 return retval; 355 } 356 357 /* 358 * Write a proper sized command to the correct address 359 */ 360 void flash_write_cmd (flash_info_t * info, flash_sect_t sect, 361 uint offset, u32 cmd) 362 { 363 364 void *addr; 365 cfiword_t cword; 366 367 addr = flash_map (info, sect, offset); 368 flash_make_cmd (info, cmd, &cword); 369 switch (info->portwidth) { 370 case FLASH_CFI_8BIT: 371 debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd, 372 cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 373 flash_write8(cword.c, addr); 374 break; 375 case FLASH_CFI_16BIT: 376 debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr, 377 cmd, cword.w, 378 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 379 flash_write16(cword.w, addr); 380 break; 381 case FLASH_CFI_32BIT: 382 debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr, 383 cmd, cword.l, 384 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 385 flash_write32(cword.l, addr); 386 break; 387 case FLASH_CFI_64BIT: 388 #ifdef DEBUG 389 { 390 char str[20]; 391 392 print_longlong (str, cword.ll); 393 394 debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n", 395 addr, cmd, str, 396 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 397 } 398 #endif 399 flash_write64(cword.ll, addr); 400 break; 401 } 402 403 /* Ensure all the instructions are fully finished */ 404 sync(); 405 406 flash_unmap(info, sect, offset, addr); 407 } 408 409 static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect) 410 { 411 flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_UNLOCK_START); 412 flash_write_cmd (info, sect, info->addr_unlock2, AMD_CMD_UNLOCK_ACK); 413 } 414 415 /*----------------------------------------------------------------------- 416 */ 417 static int flash_isequal (flash_info_t * info, flash_sect_t sect, 418 uint offset, uchar cmd) 419 { 420 void *addr; 421 cfiword_t cword; 422 int retval; 423 424 addr = flash_map (info, sect, offset); 425 flash_make_cmd (info, cmd, &cword); 426 427 debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr); 428 switch (info->portwidth) { 429 case FLASH_CFI_8BIT: 430 debug ("is= %x %x\n", flash_read8(addr), cword.c); 431 retval = (flash_read8(addr) == cword.c); 432 break; 433 case FLASH_CFI_16BIT: 434 debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w); 435 retval = (flash_read16(addr) == cword.w); 436 break; 437 case FLASH_CFI_32BIT: 438 debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l); 439 retval = (flash_read32(addr) == cword.l); 440 break; 441 case FLASH_CFI_64BIT: 442 #ifdef DEBUG 443 { 444 char str1[20]; 445 char str2[20]; 446 447 print_longlong (str1, flash_read64(addr)); 448 print_longlong (str2, cword.ll); 449 debug ("is= %s %s\n", str1, str2); 450 } 451 #endif 452 retval = (flash_read64(addr) == cword.ll); 453 break; 454 default: 455 retval = 0; 456 break; 457 } 458 flash_unmap(info, sect, offset, addr); 459 460 return retval; 461 } 462 463 /*----------------------------------------------------------------------- 464 */ 465 static int flash_isset (flash_info_t * info, flash_sect_t sect, 466 uint offset, uchar cmd) 467 { 468 void *addr; 469 cfiword_t cword; 470 int retval; 471 472 addr = flash_map (info, sect, offset); 473 flash_make_cmd (info, cmd, &cword); 474 switch (info->portwidth) { 475 case FLASH_CFI_8BIT: 476 retval = ((flash_read8(addr) & cword.c) == cword.c); 477 break; 478 case FLASH_CFI_16BIT: 479 retval = ((flash_read16(addr) & cword.w) == cword.w); 480 break; 481 case FLASH_CFI_32BIT: 482 retval = ((flash_read32(addr) & cword.l) == cword.l); 483 break; 484 case FLASH_CFI_64BIT: 485 retval = ((flash_read64(addr) & cword.ll) == cword.ll); 486 break; 487 default: 488 retval = 0; 489 break; 490 } 491 flash_unmap(info, sect, offset, addr); 492 493 return retval; 494 } 495 496 /*----------------------------------------------------------------------- 497 */ 498 static int flash_toggle (flash_info_t * info, flash_sect_t sect, 499 uint offset, uchar cmd) 500 { 501 void *addr; 502 cfiword_t cword; 503 int retval; 504 505 addr = flash_map (info, sect, offset); 506 flash_make_cmd (info, cmd, &cword); 507 switch (info->portwidth) { 508 case FLASH_CFI_8BIT: 509 retval = flash_read8(addr) != flash_read8(addr); 510 break; 511 case FLASH_CFI_16BIT: 512 retval = flash_read16(addr) != flash_read16(addr); 513 break; 514 case FLASH_CFI_32BIT: 515 retval = flash_read32(addr) != flash_read32(addr); 516 break; 517 case FLASH_CFI_64BIT: 518 retval = ( (flash_read32( addr ) != flash_read32( addr )) || 519 (flash_read32(addr+4) != flash_read32(addr+4)) ); 520 break; 521 default: 522 retval = 0; 523 break; 524 } 525 flash_unmap(info, sect, offset, addr); 526 527 return retval; 528 } 529 530 /* 531 * flash_is_busy - check to see if the flash is busy 532 * 533 * This routine checks the status of the chip and returns true if the 534 * chip is busy. 535 */ 536 static int flash_is_busy (flash_info_t * info, flash_sect_t sect) 537 { 538 int retval; 539 540 switch (info->vendor) { 541 case CFI_CMDSET_INTEL_PROG_REGIONS: 542 case CFI_CMDSET_INTEL_STANDARD: 543 case CFI_CMDSET_INTEL_EXTENDED: 544 retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE); 545 break; 546 case CFI_CMDSET_AMD_STANDARD: 547 case CFI_CMDSET_AMD_EXTENDED: 548 #ifdef CONFIG_FLASH_CFI_LEGACY 549 case CFI_CMDSET_AMD_LEGACY: 550 #endif 551 retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE); 552 break; 553 default: 554 retval = 0; 555 } 556 debug ("flash_is_busy: %d\n", retval); 557 return retval; 558 } 559 560 /*----------------------------------------------------------------------- 561 * wait for XSR.7 to be set. Time out with an error if it does not. 562 * This routine does not set the flash to read-array mode. 563 */ 564 static int flash_status_check (flash_info_t * info, flash_sect_t sector, 565 ulong tout, char *prompt) 566 { 567 ulong start; 568 569 #if CONFIG_SYS_HZ != 1000 570 if ((ulong)CONFIG_SYS_HZ > 100000) 571 tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */ 572 else 573 tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000); 574 #endif 575 576 /* Wait for command completion */ 577 #ifdef CONFIG_SYS_LOW_RES_TIMER 578 reset_timer(); 579 #endif 580 start = get_timer (0); 581 WATCHDOG_RESET(); 582 while (flash_is_busy (info, sector)) { 583 if (get_timer (start) > tout) { 584 printf ("Flash %s timeout at address %lx data %lx\n", 585 prompt, info->start[sector], 586 flash_read_long (info, sector, 0)); 587 flash_write_cmd (info, sector, 0, info->cmd_reset); 588 udelay(1); 589 return ERR_TIMOUT; 590 } 591 udelay (1); /* also triggers watchdog */ 592 } 593 return ERR_OK; 594 } 595 596 /*----------------------------------------------------------------------- 597 * Wait for XSR.7 to be set, if it times out print an error, otherwise 598 * do a full status check. 599 * 600 * This routine sets the flash to read-array mode. 601 */ 602 static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, 603 ulong tout, char *prompt) 604 { 605 int retcode; 606 607 retcode = flash_status_check (info, sector, tout, prompt); 608 switch (info->vendor) { 609 case CFI_CMDSET_INTEL_PROG_REGIONS: 610 case CFI_CMDSET_INTEL_EXTENDED: 611 case CFI_CMDSET_INTEL_STANDARD: 612 if ((retcode != ERR_OK) 613 && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { 614 retcode = ERR_INVAL; 615 printf ("Flash %s error at address %lx\n", prompt, 616 info->start[sector]); 617 if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS | 618 FLASH_STATUS_PSLBS)) { 619 puts ("Command Sequence Error.\n"); 620 } else if (flash_isset (info, sector, 0, 621 FLASH_STATUS_ECLBS)) { 622 puts ("Block Erase Error.\n"); 623 retcode = ERR_NOT_ERASED; 624 } else if (flash_isset (info, sector, 0, 625 FLASH_STATUS_PSLBS)) { 626 puts ("Locking Error\n"); 627 } 628 if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) { 629 puts ("Block locked.\n"); 630 retcode = ERR_PROTECTED; 631 } 632 if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS)) 633 puts ("Vpp Low Error.\n"); 634 } 635 flash_write_cmd (info, sector, 0, info->cmd_reset); 636 udelay(1); 637 break; 638 default: 639 break; 640 } 641 return retcode; 642 } 643 644 static int use_flash_status_poll(flash_info_t *info) 645 { 646 #ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL 647 if (info->vendor == CFI_CMDSET_AMD_EXTENDED || 648 info->vendor == CFI_CMDSET_AMD_STANDARD) 649 return 1; 650 #endif 651 return 0; 652 } 653 654 static int flash_status_poll(flash_info_t *info, void *src, void *dst, 655 ulong tout, char *prompt) 656 { 657 #ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL 658 ulong start; 659 int ready; 660 661 #if CONFIG_SYS_HZ != 1000 662 if ((ulong)CONFIG_SYS_HZ > 100000) 663 tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */ 664 else 665 tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000); 666 #endif 667 668 /* Wait for command completion */ 669 #ifdef CONFIG_SYS_LOW_RES_TIMER 670 reset_timer(); 671 #endif 672 start = get_timer(0); 673 WATCHDOG_RESET(); 674 while (1) { 675 switch (info->portwidth) { 676 case FLASH_CFI_8BIT: 677 ready = flash_read8(dst) == flash_read8(src); 678 break; 679 case FLASH_CFI_16BIT: 680 ready = flash_read16(dst) == flash_read16(src); 681 break; 682 case FLASH_CFI_32BIT: 683 ready = flash_read32(dst) == flash_read32(src); 684 break; 685 case FLASH_CFI_64BIT: 686 ready = flash_read64(dst) == flash_read64(src); 687 break; 688 default: 689 ready = 0; 690 break; 691 } 692 if (ready) 693 break; 694 if (get_timer(start) > tout) { 695 printf("Flash %s timeout at address %lx data %lx\n", 696 prompt, (ulong)dst, (ulong)flash_read8(dst)); 697 return ERR_TIMOUT; 698 } 699 udelay(1); /* also triggers watchdog */ 700 } 701 #endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */ 702 return ERR_OK; 703 } 704 705 /*----------------------------------------------------------------------- 706 */ 707 static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) 708 { 709 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 710 unsigned short w; 711 unsigned int l; 712 unsigned long long ll; 713 #endif 714 715 switch (info->portwidth) { 716 case FLASH_CFI_8BIT: 717 cword->c = c; 718 break; 719 case FLASH_CFI_16BIT: 720 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 721 w = c; 722 w <<= 8; 723 cword->w = (cword->w >> 8) | w; 724 #else 725 cword->w = (cword->w << 8) | c; 726 #endif 727 break; 728 case FLASH_CFI_32BIT: 729 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 730 l = c; 731 l <<= 24; 732 cword->l = (cword->l >> 8) | l; 733 #else 734 cword->l = (cword->l << 8) | c; 735 #endif 736 break; 737 case FLASH_CFI_64BIT: 738 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 739 ll = c; 740 ll <<= 56; 741 cword->ll = (cword->ll >> 8) | ll; 742 #else 743 cword->ll = (cword->ll << 8) | c; 744 #endif 745 break; 746 } 747 } 748 749 /* 750 * Loop through the sector table starting from the previously found sector. 751 * Searches forwards or backwards, dependent on the passed address. 752 */ 753 static flash_sect_t find_sector (flash_info_t * info, ulong addr) 754 { 755 static flash_sect_t saved_sector = 0; /* previously found sector */ 756 static flash_info_t *saved_info = 0; /* previously used flash bank */ 757 flash_sect_t sector = saved_sector; 758 759 if ((info != saved_info) || (sector >= info->sector_count)) 760 sector = 0; 761 762 while ((info->start[sector] < addr) 763 && (sector < info->sector_count - 1)) 764 sector++; 765 while ((info->start[sector] > addr) && (sector > 0)) 766 /* 767 * also decrements the sector in case of an overshot 768 * in the first loop 769 */ 770 sector--; 771 772 saved_sector = sector; 773 saved_info = info; 774 return sector; 775 } 776 777 /*----------------------------------------------------------------------- 778 */ 779 static int flash_write_cfiword (flash_info_t * info, ulong dest, 780 cfiword_t cword) 781 { 782 void *dstaddr = (void *)dest; 783 int flag; 784 flash_sect_t sect = 0; 785 char sect_found = 0; 786 787 /* Check if Flash is (sufficiently) erased */ 788 switch (info->portwidth) { 789 case FLASH_CFI_8BIT: 790 flag = ((flash_read8(dstaddr) & cword.c) == cword.c); 791 break; 792 case FLASH_CFI_16BIT: 793 flag = ((flash_read16(dstaddr) & cword.w) == cword.w); 794 break; 795 case FLASH_CFI_32BIT: 796 flag = ((flash_read32(dstaddr) & cword.l) == cword.l); 797 break; 798 case FLASH_CFI_64BIT: 799 flag = ((flash_read64(dstaddr) & cword.ll) == cword.ll); 800 break; 801 default: 802 flag = 0; 803 break; 804 } 805 if (!flag) 806 return ERR_NOT_ERASED; 807 808 /* Disable interrupts which might cause a timeout here */ 809 flag = disable_interrupts (); 810 811 switch (info->vendor) { 812 case CFI_CMDSET_INTEL_PROG_REGIONS: 813 case CFI_CMDSET_INTEL_EXTENDED: 814 case CFI_CMDSET_INTEL_STANDARD: 815 flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS); 816 flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE); 817 break; 818 case CFI_CMDSET_AMD_EXTENDED: 819 case CFI_CMDSET_AMD_STANDARD: 820 sect = find_sector(info, dest); 821 flash_unlock_seq (info, sect); 822 flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE); 823 sect_found = 1; 824 break; 825 #ifdef CONFIG_FLASH_CFI_LEGACY 826 case CFI_CMDSET_AMD_LEGACY: 827 sect = find_sector(info, dest); 828 flash_unlock_seq (info, 0); 829 flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE); 830 sect_found = 1; 831 break; 832 #endif 833 } 834 835 switch (info->portwidth) { 836 case FLASH_CFI_8BIT: 837 flash_write8(cword.c, dstaddr); 838 break; 839 case FLASH_CFI_16BIT: 840 flash_write16(cword.w, dstaddr); 841 break; 842 case FLASH_CFI_32BIT: 843 flash_write32(cword.l, dstaddr); 844 break; 845 case FLASH_CFI_64BIT: 846 flash_write64(cword.ll, dstaddr); 847 break; 848 } 849 850 /* re-enable interrupts if necessary */ 851 if (flag) 852 enable_interrupts (); 853 854 if (!sect_found) 855 sect = find_sector (info, dest); 856 857 if (use_flash_status_poll(info)) 858 return flash_status_poll(info, &cword, dstaddr, 859 info->write_tout, "write"); 860 else 861 return flash_full_status_check(info, sect, 862 info->write_tout, "write"); 863 } 864 865 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 866 867 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, 868 int len) 869 { 870 flash_sect_t sector; 871 int cnt; 872 int retcode; 873 void *src = cp; 874 void *dst = (void *)dest; 875 void *dst2 = dst; 876 int flag = 0; 877 uint offset = 0; 878 unsigned int shift; 879 uchar write_cmd; 880 881 switch (info->portwidth) { 882 case FLASH_CFI_8BIT: 883 shift = 0; 884 break; 885 case FLASH_CFI_16BIT: 886 shift = 1; 887 break; 888 case FLASH_CFI_32BIT: 889 shift = 2; 890 break; 891 case FLASH_CFI_64BIT: 892 shift = 3; 893 break; 894 default: 895 retcode = ERR_INVAL; 896 goto out_unmap; 897 } 898 899 cnt = len >> shift; 900 901 while ((cnt-- > 0) && (flag == 0)) { 902 switch (info->portwidth) { 903 case FLASH_CFI_8BIT: 904 flag = ((flash_read8(dst2) & flash_read8(src)) == 905 flash_read8(src)); 906 src += 1, dst2 += 1; 907 break; 908 case FLASH_CFI_16BIT: 909 flag = ((flash_read16(dst2) & flash_read16(src)) == 910 flash_read16(src)); 911 src += 2, dst2 += 2; 912 break; 913 case FLASH_CFI_32BIT: 914 flag = ((flash_read32(dst2) & flash_read32(src)) == 915 flash_read32(src)); 916 src += 4, dst2 += 4; 917 break; 918 case FLASH_CFI_64BIT: 919 flag = ((flash_read64(dst2) & flash_read64(src)) == 920 flash_read64(src)); 921 src += 8, dst2 += 8; 922 break; 923 } 924 } 925 if (!flag) { 926 retcode = ERR_NOT_ERASED; 927 goto out_unmap; 928 } 929 930 src = cp; 931 sector = find_sector (info, dest); 932 933 switch (info->vendor) { 934 case CFI_CMDSET_INTEL_PROG_REGIONS: 935 case CFI_CMDSET_INTEL_STANDARD: 936 case CFI_CMDSET_INTEL_EXTENDED: 937 write_cmd = (info->vendor == CFI_CMDSET_INTEL_PROG_REGIONS) ? 938 FLASH_CMD_WRITE_BUFFER_PROG : FLASH_CMD_WRITE_TO_BUFFER; 939 flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); 940 flash_write_cmd (info, sector, 0, FLASH_CMD_READ_STATUS); 941 flash_write_cmd (info, sector, 0, write_cmd); 942 retcode = flash_status_check (info, sector, 943 info->buffer_write_tout, 944 "write to buffer"); 945 if (retcode == ERR_OK) { 946 /* reduce the number of loops by the width of 947 * the port */ 948 cnt = len >> shift; 949 flash_write_cmd (info, sector, 0, cnt - 1); 950 while (cnt-- > 0) { 951 switch (info->portwidth) { 952 case FLASH_CFI_8BIT: 953 flash_write8(flash_read8(src), dst); 954 src += 1, dst += 1; 955 break; 956 case FLASH_CFI_16BIT: 957 flash_write16(flash_read16(src), dst); 958 src += 2, dst += 2; 959 break; 960 case FLASH_CFI_32BIT: 961 flash_write32(flash_read32(src), dst); 962 src += 4, dst += 4; 963 break; 964 case FLASH_CFI_64BIT: 965 flash_write64(flash_read64(src), dst); 966 src += 8, dst += 8; 967 break; 968 default: 969 retcode = ERR_INVAL; 970 goto out_unmap; 971 } 972 } 973 flash_write_cmd (info, sector, 0, 974 FLASH_CMD_WRITE_BUFFER_CONFIRM); 975 retcode = flash_full_status_check ( 976 info, sector, info->buffer_write_tout, 977 "buffer write"); 978 } 979 980 break; 981 982 case CFI_CMDSET_AMD_STANDARD: 983 case CFI_CMDSET_AMD_EXTENDED: 984 flash_unlock_seq(info,0); 985 986 #ifdef CONFIG_FLASH_SPANSION_S29WS_N 987 offset = ((unsigned long)dst - info->start[sector]) >> shift; 988 #endif 989 flash_write_cmd(info, sector, offset, AMD_CMD_WRITE_TO_BUFFER); 990 cnt = len >> shift; 991 flash_write_cmd(info, sector, offset, cnt - 1); 992 993 switch (info->portwidth) { 994 case FLASH_CFI_8BIT: 995 while (cnt-- > 0) { 996 flash_write8(flash_read8(src), dst); 997 src += 1, dst += 1; 998 } 999 break; 1000 case FLASH_CFI_16BIT: 1001 while (cnt-- > 0) { 1002 flash_write16(flash_read16(src), dst); 1003 src += 2, dst += 2; 1004 } 1005 break; 1006 case FLASH_CFI_32BIT: 1007 while (cnt-- > 0) { 1008 flash_write32(flash_read32(src), dst); 1009 src += 4, dst += 4; 1010 } 1011 break; 1012 case FLASH_CFI_64BIT: 1013 while (cnt-- > 0) { 1014 flash_write64(flash_read64(src), dst); 1015 src += 8, dst += 8; 1016 } 1017 break; 1018 default: 1019 retcode = ERR_INVAL; 1020 goto out_unmap; 1021 } 1022 1023 flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM); 1024 if (use_flash_status_poll(info)) 1025 retcode = flash_status_poll(info, src - (1 << shift), 1026 dst - (1 << shift), 1027 info->buffer_write_tout, 1028 "buffer write"); 1029 else 1030 retcode = flash_full_status_check(info, sector, 1031 info->buffer_write_tout, 1032 "buffer write"); 1033 break; 1034 1035 default: 1036 debug ("Unknown Command Set\n"); 1037 retcode = ERR_INVAL; 1038 break; 1039 } 1040 1041 out_unmap: 1042 return retcode; 1043 } 1044 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 1045 1046 1047 /*----------------------------------------------------------------------- 1048 */ 1049 int flash_erase (flash_info_t * info, int s_first, int s_last) 1050 { 1051 int rcode = 0; 1052 int prot; 1053 flash_sect_t sect; 1054 int st; 1055 1056 if (info->flash_id != FLASH_MAN_CFI) { 1057 puts ("Can't erase unknown flash type - aborted\n"); 1058 return 1; 1059 } 1060 if ((s_first < 0) || (s_first > s_last)) { 1061 puts ("- no sectors to erase\n"); 1062 return 1; 1063 } 1064 1065 prot = 0; 1066 for (sect = s_first; sect <= s_last; ++sect) { 1067 if (info->protect[sect]) { 1068 prot++; 1069 } 1070 } 1071 if (prot) { 1072 printf ("- Warning: %d protected sectors will not be erased!\n", 1073 prot); 1074 } else if (flash_verbose) { 1075 putc ('\n'); 1076 } 1077 1078 1079 for (sect = s_first; sect <= s_last; sect++) { 1080 if (info->protect[sect] == 0) { /* not protected */ 1081 switch (info->vendor) { 1082 case CFI_CMDSET_INTEL_PROG_REGIONS: 1083 case CFI_CMDSET_INTEL_STANDARD: 1084 case CFI_CMDSET_INTEL_EXTENDED: 1085 flash_write_cmd (info, sect, 0, 1086 FLASH_CMD_CLEAR_STATUS); 1087 flash_write_cmd (info, sect, 0, 1088 FLASH_CMD_BLOCK_ERASE); 1089 flash_write_cmd (info, sect, 0, 1090 FLASH_CMD_ERASE_CONFIRM); 1091 break; 1092 case CFI_CMDSET_AMD_STANDARD: 1093 case CFI_CMDSET_AMD_EXTENDED: 1094 flash_unlock_seq (info, sect); 1095 flash_write_cmd (info, sect, 1096 info->addr_unlock1, 1097 AMD_CMD_ERASE_START); 1098 flash_unlock_seq (info, sect); 1099 flash_write_cmd (info, sect, 0, 1100 AMD_CMD_ERASE_SECTOR); 1101 break; 1102 #ifdef CONFIG_FLASH_CFI_LEGACY 1103 case CFI_CMDSET_AMD_LEGACY: 1104 flash_unlock_seq (info, 0); 1105 flash_write_cmd (info, 0, info->addr_unlock1, 1106 AMD_CMD_ERASE_START); 1107 flash_unlock_seq (info, 0); 1108 flash_write_cmd (info, sect, 0, 1109 AMD_CMD_ERASE_SECTOR); 1110 break; 1111 #endif 1112 default: 1113 debug ("Unkown flash vendor %d\n", 1114 info->vendor); 1115 break; 1116 } 1117 1118 if (use_flash_status_poll(info)) { 1119 cfiword_t cword = (cfiword_t)0xffffffffffffffffULL; 1120 void *dest; 1121 dest = flash_map(info, sect, 0); 1122 st = flash_status_poll(info, &cword, dest, 1123 info->erase_blk_tout, "erase"); 1124 flash_unmap(info, sect, 0, dest); 1125 } else 1126 st = flash_full_status_check(info, sect, 1127 info->erase_blk_tout, 1128 "erase"); 1129 if (st) 1130 rcode = 1; 1131 else if (flash_verbose) 1132 putc ('.'); 1133 } 1134 } 1135 1136 if (flash_verbose) 1137 puts (" done\n"); 1138 1139 return rcode; 1140 } 1141 1142 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO 1143 static int sector_erased(flash_info_t *info, int i) 1144 { 1145 int k; 1146 int size; 1147 u32 *flash; 1148 1149 /* 1150 * Check if whole sector is erased 1151 */ 1152 size = flash_sector_size(info, i); 1153 flash = (u32 *)info->start[i]; 1154 /* divide by 4 for longword access */ 1155 size = size >> 2; 1156 1157 for (k = 0; k < size; k++) { 1158 if (flash_read32(flash++) != 0xffffffff) 1159 return 0; /* not erased */ 1160 } 1161 1162 return 1; /* erased */ 1163 } 1164 #endif /* CONFIG_SYS_FLASH_EMPTY_INFO */ 1165 1166 void flash_print_info (flash_info_t * info) 1167 { 1168 int i; 1169 1170 if (info->flash_id != FLASH_MAN_CFI) { 1171 puts ("missing or unknown FLASH type\n"); 1172 return; 1173 } 1174 1175 printf ("%s flash (%d x %d)", 1176 info->name, 1177 (info->portwidth << 3), (info->chipwidth << 3)); 1178 if (info->size < 1024*1024) 1179 printf (" Size: %ld kB in %d Sectors\n", 1180 info->size >> 10, info->sector_count); 1181 else 1182 printf (" Size: %ld MB in %d Sectors\n", 1183 info->size >> 20, info->sector_count); 1184 printf (" "); 1185 switch (info->vendor) { 1186 case CFI_CMDSET_INTEL_PROG_REGIONS: 1187 printf ("Intel Prog Regions"); 1188 break; 1189 case CFI_CMDSET_INTEL_STANDARD: 1190 printf ("Intel Standard"); 1191 break; 1192 case CFI_CMDSET_INTEL_EXTENDED: 1193 printf ("Intel Extended"); 1194 break; 1195 case CFI_CMDSET_AMD_STANDARD: 1196 printf ("AMD Standard"); 1197 break; 1198 case CFI_CMDSET_AMD_EXTENDED: 1199 printf ("AMD Extended"); 1200 break; 1201 #ifdef CONFIG_FLASH_CFI_LEGACY 1202 case CFI_CMDSET_AMD_LEGACY: 1203 printf ("AMD Legacy"); 1204 break; 1205 #endif 1206 default: 1207 printf ("Unknown (%d)", info->vendor); 1208 break; 1209 } 1210 printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x", 1211 info->manufacturer_id); 1212 printf (info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", 1213 info->device_id); 1214 if ((info->device_id & 0xff) == 0x7E) { 1215 printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", 1216 info->device_id2); 1217 } 1218 printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n", 1219 info->erase_blk_tout, 1220 info->write_tout); 1221 if (info->buffer_size > 1) { 1222 printf (" Buffer write timeout: %ld ms, " 1223 "buffer size: %d bytes\n", 1224 info->buffer_write_tout, 1225 info->buffer_size); 1226 } 1227 1228 puts ("\n Sector Start Addresses:"); 1229 for (i = 0; i < info->sector_count; ++i) { 1230 if (ctrlc()) 1231 break; 1232 if ((i % 5) == 0) 1233 putc('\n'); 1234 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO 1235 /* print empty and read-only info */ 1236 printf (" %08lX %c %s ", 1237 info->start[i], 1238 sector_erased(info, i) ? 'E' : ' ', 1239 info->protect[i] ? "RO" : " "); 1240 #else /* ! CONFIG_SYS_FLASH_EMPTY_INFO */ 1241 printf (" %08lX %s ", 1242 info->start[i], 1243 info->protect[i] ? "RO" : " "); 1244 #endif 1245 } 1246 putc ('\n'); 1247 return; 1248 } 1249 1250 /*----------------------------------------------------------------------- 1251 * This is used in a few places in write_buf() to show programming 1252 * progress. Making it a function is nasty because it needs to do side 1253 * effect updates to digit and dots. Repeated code is nasty too, so 1254 * we define it once here. 1255 */ 1256 #ifdef CONFIG_FLASH_SHOW_PROGRESS 1257 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \ 1258 if (flash_verbose) { \ 1259 dots -= dots_sub; \ 1260 if ((scale > 0) && (dots <= 0)) { \ 1261 if ((digit % 5) == 0) \ 1262 printf ("%d", digit / 5); \ 1263 else \ 1264 putc ('.'); \ 1265 digit--; \ 1266 dots += scale; \ 1267 } \ 1268 } 1269 #else 1270 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) 1271 #endif 1272 1273 /*----------------------------------------------------------------------- 1274 * Copy memory to flash, returns: 1275 * 0 - OK 1276 * 1 - write timeout 1277 * 2 - Flash not erased 1278 */ 1279 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) 1280 { 1281 ulong wp; 1282 uchar *p; 1283 int aln; 1284 cfiword_t cword; 1285 int i, rc; 1286 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1287 int buffered_size; 1288 #endif 1289 #ifdef CONFIG_FLASH_SHOW_PROGRESS 1290 int digit = CONFIG_FLASH_SHOW_PROGRESS; 1291 int scale = 0; 1292 int dots = 0; 1293 1294 /* 1295 * Suppress if there are fewer than CONFIG_FLASH_SHOW_PROGRESS writes. 1296 */ 1297 if (cnt >= CONFIG_FLASH_SHOW_PROGRESS) { 1298 scale = (int)((cnt + CONFIG_FLASH_SHOW_PROGRESS - 1) / 1299 CONFIG_FLASH_SHOW_PROGRESS); 1300 } 1301 #endif 1302 1303 /* get lower aligned address */ 1304 wp = (addr & ~(info->portwidth - 1)); 1305 1306 /* handle unaligned start */ 1307 if ((aln = addr - wp) != 0) { 1308 cword.l = 0; 1309 p = (uchar *)wp; 1310 for (i = 0; i < aln; ++i) 1311 flash_add_byte (info, &cword, flash_read8(p + i)); 1312 1313 for (; (i < info->portwidth) && (cnt > 0); i++) { 1314 flash_add_byte (info, &cword, *src++); 1315 cnt--; 1316 } 1317 for (; (cnt == 0) && (i < info->portwidth); ++i) 1318 flash_add_byte (info, &cword, flash_read8(p + i)); 1319 1320 rc = flash_write_cfiword (info, wp, cword); 1321 if (rc != 0) 1322 return rc; 1323 1324 wp += i; 1325 FLASH_SHOW_PROGRESS(scale, dots, digit, i); 1326 } 1327 1328 /* handle the aligned part */ 1329 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1330 buffered_size = (info->portwidth / info->chipwidth); 1331 buffered_size *= info->buffer_size; 1332 while (cnt >= info->portwidth) { 1333 /* prohibit buffer write when buffer_size is 1 */ 1334 if (info->buffer_size == 1) { 1335 cword.l = 0; 1336 for (i = 0; i < info->portwidth; i++) 1337 flash_add_byte (info, &cword, *src++); 1338 if ((rc = flash_write_cfiword (info, wp, cword)) != 0) 1339 return rc; 1340 wp += info->portwidth; 1341 cnt -= info->portwidth; 1342 continue; 1343 } 1344 1345 /* write buffer until next buffered_size aligned boundary */ 1346 i = buffered_size - (wp % buffered_size); 1347 if (i > cnt) 1348 i = cnt; 1349 if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK) 1350 return rc; 1351 i -= i & (info->portwidth - 1); 1352 wp += i; 1353 src += i; 1354 cnt -= i; 1355 FLASH_SHOW_PROGRESS(scale, dots, digit, i); 1356 } 1357 #else 1358 while (cnt >= info->portwidth) { 1359 cword.l = 0; 1360 for (i = 0; i < info->portwidth; i++) { 1361 flash_add_byte (info, &cword, *src++); 1362 } 1363 if ((rc = flash_write_cfiword (info, wp, cword)) != 0) 1364 return rc; 1365 wp += info->portwidth; 1366 cnt -= info->portwidth; 1367 FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth); 1368 } 1369 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 1370 1371 if (cnt == 0) { 1372 return (0); 1373 } 1374 1375 /* 1376 * handle unaligned tail bytes 1377 */ 1378 cword.l = 0; 1379 p = (uchar *)wp; 1380 for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) { 1381 flash_add_byte (info, &cword, *src++); 1382 --cnt; 1383 } 1384 for (; i < info->portwidth; ++i) 1385 flash_add_byte (info, &cword, flash_read8(p + i)); 1386 1387 return flash_write_cfiword (info, wp, cword); 1388 } 1389 1390 /*----------------------------------------------------------------------- 1391 */ 1392 #ifdef CONFIG_SYS_FLASH_PROTECTION 1393 1394 int flash_real_protect (flash_info_t * info, long sector, int prot) 1395 { 1396 int retcode = 0; 1397 1398 switch (info->vendor) { 1399 case CFI_CMDSET_INTEL_PROG_REGIONS: 1400 case CFI_CMDSET_INTEL_STANDARD: 1401 case CFI_CMDSET_INTEL_EXTENDED: 1402 /* 1403 * see errata called 1404 * "Numonyx Axcell P33/P30 Specification Update" :) 1405 */ 1406 flash_write_cmd (info, sector, 0, FLASH_CMD_READ_ID); 1407 if (!flash_isequal (info, sector, FLASH_OFFSET_PROTECT, 1408 prot)) { 1409 /* 1410 * cmd must come before FLASH_CMD_PROTECT + 20us 1411 * Disable interrupts which might cause a timeout here. 1412 */ 1413 int flag = disable_interrupts (); 1414 unsigned short cmd; 1415 1416 if (prot) 1417 cmd = FLASH_CMD_PROTECT_SET; 1418 else 1419 cmd = FLASH_CMD_PROTECT_CLEAR; 1420 1421 flash_write_cmd (info, sector, 0, 1422 FLASH_CMD_PROTECT); 1423 flash_write_cmd (info, sector, 0, cmd); 1424 /* re-enable interrupts if necessary */ 1425 if (flag) 1426 enable_interrupts (); 1427 } 1428 break; 1429 case CFI_CMDSET_AMD_EXTENDED: 1430 case CFI_CMDSET_AMD_STANDARD: 1431 /* U-Boot only checks the first byte */ 1432 if (info->manufacturer_id == (uchar)ATM_MANUFACT) { 1433 if (prot) { 1434 flash_unlock_seq (info, 0); 1435 flash_write_cmd (info, 0, 1436 info->addr_unlock1, 1437 ATM_CMD_SOFTLOCK_START); 1438 flash_unlock_seq (info, 0); 1439 flash_write_cmd (info, sector, 0, 1440 ATM_CMD_LOCK_SECT); 1441 } else { 1442 flash_write_cmd (info, 0, 1443 info->addr_unlock1, 1444 AMD_CMD_UNLOCK_START); 1445 if (info->device_id == ATM_ID_BV6416) 1446 flash_write_cmd (info, sector, 1447 0, ATM_CMD_UNLOCK_SECT); 1448 } 1449 } 1450 break; 1451 #ifdef CONFIG_FLASH_CFI_LEGACY 1452 case CFI_CMDSET_AMD_LEGACY: 1453 flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); 1454 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT); 1455 if (prot) 1456 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET); 1457 else 1458 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR); 1459 #endif 1460 }; 1461 1462 /* 1463 * Flash needs to be in status register read mode for 1464 * flash_full_status_check() to work correctly 1465 */ 1466 flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS); 1467 if ((retcode = 1468 flash_full_status_check (info, sector, info->erase_blk_tout, 1469 prot ? "protect" : "unprotect")) == 0) { 1470 1471 info->protect[sector] = prot; 1472 1473 /* 1474 * On some of Intel's flash chips (marked via legacy_unlock) 1475 * unprotect unprotects all locking. 1476 */ 1477 if ((prot == 0) && (info->legacy_unlock)) { 1478 flash_sect_t i; 1479 1480 for (i = 0; i < info->sector_count; i++) { 1481 if (info->protect[i]) 1482 flash_real_protect (info, i, 1); 1483 } 1484 } 1485 } 1486 return retcode; 1487 } 1488 1489 /*----------------------------------------------------------------------- 1490 * flash_read_user_serial - read the OneTimeProgramming cells 1491 */ 1492 void flash_read_user_serial (flash_info_t * info, void *buffer, int offset, 1493 int len) 1494 { 1495 uchar *src; 1496 uchar *dst; 1497 1498 dst = buffer; 1499 src = flash_map (info, 0, FLASH_OFFSET_USER_PROTECTION); 1500 flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); 1501 memcpy (dst, src + offset, len); 1502 flash_write_cmd (info, 0, 0, info->cmd_reset); 1503 udelay(1); 1504 flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src); 1505 } 1506 1507 /* 1508 * flash_read_factory_serial - read the device Id from the protection area 1509 */ 1510 void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset, 1511 int len) 1512 { 1513 uchar *src; 1514 1515 src = flash_map (info, 0, FLASH_OFFSET_INTEL_PROTECTION); 1516 flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); 1517 memcpy (buffer, src + offset, len); 1518 flash_write_cmd (info, 0, 0, info->cmd_reset); 1519 udelay(1); 1520 flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src); 1521 } 1522 1523 #endif /* CONFIG_SYS_FLASH_PROTECTION */ 1524 1525 /*----------------------------------------------------------------------- 1526 * Reverse the order of the erase regions in the CFI QRY structure. 1527 * This is needed for chips that are either a) correctly detected as 1528 * top-boot, or b) buggy. 1529 */ 1530 static void cfi_reverse_geometry(struct cfi_qry *qry) 1531 { 1532 unsigned int i, j; 1533 u32 tmp; 1534 1535 for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) { 1536 tmp = qry->erase_region_info[i]; 1537 qry->erase_region_info[i] = qry->erase_region_info[j]; 1538 qry->erase_region_info[j] = tmp; 1539 } 1540 } 1541 1542 /*----------------------------------------------------------------------- 1543 * read jedec ids from device and set corresponding fields in info struct 1544 * 1545 * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct 1546 * 1547 */ 1548 static void cmdset_intel_read_jedec_ids(flash_info_t *info) 1549 { 1550 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1551 udelay(1); 1552 flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); 1553 udelay(1000); /* some flash are slow to respond */ 1554 info->manufacturer_id = flash_read_uchar (info, 1555 FLASH_OFFSET_MANUFACTURER_ID); 1556 info->device_id = (info->chipwidth == FLASH_CFI_16BIT) ? 1557 flash_read_word (info, FLASH_OFFSET_DEVICE_ID) : 1558 flash_read_uchar (info, FLASH_OFFSET_DEVICE_ID); 1559 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1560 } 1561 1562 static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry) 1563 { 1564 info->cmd_reset = FLASH_CMD_RESET; 1565 1566 cmdset_intel_read_jedec_ids(info); 1567 flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); 1568 1569 #ifdef CONFIG_SYS_FLASH_PROTECTION 1570 /* read legacy lock/unlock bit from intel flash */ 1571 if (info->ext_addr) { 1572 info->legacy_unlock = flash_read_uchar (info, 1573 info->ext_addr + 5) & 0x08; 1574 } 1575 #endif 1576 1577 return 0; 1578 } 1579 1580 static void cmdset_amd_read_jedec_ids(flash_info_t *info) 1581 { 1582 ushort bankId = 0; 1583 uchar manuId; 1584 1585 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1586 flash_unlock_seq(info, 0); 1587 flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); 1588 udelay(1000); /* some flash are slow to respond */ 1589 1590 manuId = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); 1591 /* JEDEC JEP106Z specifies ID codes up to bank 7 */ 1592 while (manuId == FLASH_CONTINUATION_CODE && bankId < 0x800) { 1593 bankId += 0x100; 1594 manuId = flash_read_uchar (info, 1595 bankId | FLASH_OFFSET_MANUFACTURER_ID); 1596 } 1597 info->manufacturer_id = manuId; 1598 1599 switch (info->chipwidth){ 1600 case FLASH_CFI_8BIT: 1601 info->device_id = flash_read_uchar (info, 1602 FLASH_OFFSET_DEVICE_ID); 1603 if (info->device_id == 0x7E) { 1604 /* AMD 3-byte (expanded) device ids */ 1605 info->device_id2 = flash_read_uchar (info, 1606 FLASH_OFFSET_DEVICE_ID2); 1607 info->device_id2 <<= 8; 1608 info->device_id2 |= flash_read_uchar (info, 1609 FLASH_OFFSET_DEVICE_ID3); 1610 } 1611 break; 1612 case FLASH_CFI_16BIT: 1613 info->device_id = flash_read_word (info, 1614 FLASH_OFFSET_DEVICE_ID); 1615 if ((info->device_id & 0xff) == 0x7E) { 1616 /* AMD 3-byte (expanded) device ids */ 1617 info->device_id2 = flash_read_uchar (info, 1618 FLASH_OFFSET_DEVICE_ID2); 1619 info->device_id2 <<= 8; 1620 info->device_id2 |= flash_read_uchar (info, 1621 FLASH_OFFSET_DEVICE_ID3); 1622 } 1623 break; 1624 default: 1625 break; 1626 } 1627 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1628 udelay(1); 1629 } 1630 1631 static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) 1632 { 1633 info->cmd_reset = AMD_CMD_RESET; 1634 1635 cmdset_amd_read_jedec_ids(info); 1636 flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); 1637 1638 return 0; 1639 } 1640 1641 #ifdef CONFIG_FLASH_CFI_LEGACY 1642 static void flash_read_jedec_ids (flash_info_t * info) 1643 { 1644 info->manufacturer_id = 0; 1645 info->device_id = 0; 1646 info->device_id2 = 0; 1647 1648 switch (info->vendor) { 1649 case CFI_CMDSET_INTEL_PROG_REGIONS: 1650 case CFI_CMDSET_INTEL_STANDARD: 1651 case CFI_CMDSET_INTEL_EXTENDED: 1652 cmdset_intel_read_jedec_ids(info); 1653 break; 1654 case CFI_CMDSET_AMD_STANDARD: 1655 case CFI_CMDSET_AMD_EXTENDED: 1656 cmdset_amd_read_jedec_ids(info); 1657 break; 1658 default: 1659 break; 1660 } 1661 } 1662 1663 /*----------------------------------------------------------------------- 1664 * Call board code to request info about non-CFI flash. 1665 * board_flash_get_legacy needs to fill in at least: 1666 * info->portwidth, info->chipwidth and info->interface for Jedec probing. 1667 */ 1668 static int flash_detect_legacy(phys_addr_t base, int banknum) 1669 { 1670 flash_info_t *info = &flash_info[banknum]; 1671 1672 if (board_flash_get_legacy(base, banknum, info)) { 1673 /* board code may have filled info completely. If not, we 1674 use JEDEC ID probing. */ 1675 if (!info->vendor) { 1676 int modes[] = { 1677 CFI_CMDSET_AMD_STANDARD, 1678 CFI_CMDSET_INTEL_STANDARD 1679 }; 1680 int i; 1681 1682 for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) { 1683 info->vendor = modes[i]; 1684 info->start[0] = 1685 (ulong)map_physmem(base, 1686 info->portwidth, 1687 MAP_NOCACHE); 1688 if (info->portwidth == FLASH_CFI_8BIT 1689 && info->interface == FLASH_CFI_X8X16) { 1690 info->addr_unlock1 = 0x2AAA; 1691 info->addr_unlock2 = 0x5555; 1692 } else { 1693 info->addr_unlock1 = 0x5555; 1694 info->addr_unlock2 = 0x2AAA; 1695 } 1696 flash_read_jedec_ids(info); 1697 debug("JEDEC PROBE: ID %x %x %x\n", 1698 info->manufacturer_id, 1699 info->device_id, 1700 info->device_id2); 1701 if (jedec_flash_match(info, info->start[0])) 1702 break; 1703 else 1704 unmap_physmem((void *)info->start[0], 1705 MAP_NOCACHE); 1706 } 1707 } 1708 1709 switch(info->vendor) { 1710 case CFI_CMDSET_INTEL_PROG_REGIONS: 1711 case CFI_CMDSET_INTEL_STANDARD: 1712 case CFI_CMDSET_INTEL_EXTENDED: 1713 info->cmd_reset = FLASH_CMD_RESET; 1714 break; 1715 case CFI_CMDSET_AMD_STANDARD: 1716 case CFI_CMDSET_AMD_EXTENDED: 1717 case CFI_CMDSET_AMD_LEGACY: 1718 info->cmd_reset = AMD_CMD_RESET; 1719 break; 1720 } 1721 info->flash_id = FLASH_MAN_CFI; 1722 return 1; 1723 } 1724 return 0; /* use CFI */ 1725 } 1726 #else 1727 static inline int flash_detect_legacy(phys_addr_t base, int banknum) 1728 { 1729 return 0; /* use CFI */ 1730 } 1731 #endif 1732 1733 /*----------------------------------------------------------------------- 1734 * detect if flash is compatible with the Common Flash Interface (CFI) 1735 * http://www.jedec.org/download/search/jesd68.pdf 1736 */ 1737 static void flash_read_cfi (flash_info_t *info, void *buf, 1738 unsigned int start, size_t len) 1739 { 1740 u8 *p = buf; 1741 unsigned int i; 1742 1743 for (i = 0; i < len; i++) 1744 p[i] = flash_read_uchar(info, start + i); 1745 } 1746 1747 void __flash_cmd_reset(flash_info_t *info) 1748 { 1749 /* 1750 * We do not yet know what kind of commandset to use, so we issue 1751 * the reset command in both Intel and AMD variants, in the hope 1752 * that AMD flash roms ignore the Intel command. 1753 */ 1754 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1755 udelay(1); 1756 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1757 } 1758 void flash_cmd_reset(flash_info_t *info) 1759 __attribute__((weak,alias("__flash_cmd_reset"))); 1760 1761 static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) 1762 { 1763 int cfi_offset; 1764 1765 /* Issue FLASH reset command */ 1766 flash_cmd_reset(info); 1767 1768 for (cfi_offset=0; 1769 cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint); 1770 cfi_offset++) { 1771 flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], 1772 FLASH_CMD_CFI); 1773 if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') 1774 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') 1775 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { 1776 flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, 1777 sizeof(struct cfi_qry)); 1778 info->interface = le16_to_cpu(qry->interface_desc); 1779 1780 info->cfi_offset = flash_offset_cfi[cfi_offset]; 1781 debug ("device interface is %d\n", 1782 info->interface); 1783 debug ("found port %d chip %d ", 1784 info->portwidth, info->chipwidth); 1785 debug ("port %d bits chip %d bits\n", 1786 info->portwidth << CFI_FLASH_SHIFT_WIDTH, 1787 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 1788 1789 /* calculate command offsets as in the Linux driver */ 1790 info->addr_unlock1 = 0x555; 1791 info->addr_unlock2 = 0x2aa; 1792 1793 /* 1794 * modify the unlock address if we are 1795 * in compatibility mode 1796 */ 1797 if ( /* x8/x16 in x8 mode */ 1798 ((info->chipwidth == FLASH_CFI_BY8) && 1799 (info->interface == FLASH_CFI_X8X16)) || 1800 /* x16/x32 in x16 mode */ 1801 ((info->chipwidth == FLASH_CFI_BY16) && 1802 (info->interface == FLASH_CFI_X16X32))) 1803 { 1804 info->addr_unlock1 = 0xaaa; 1805 info->addr_unlock2 = 0x555; 1806 } 1807 1808 info->name = "CFI conformant"; 1809 return 1; 1810 } 1811 } 1812 1813 return 0; 1814 } 1815 1816 static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) 1817 { 1818 debug ("flash detect cfi\n"); 1819 1820 for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH; 1821 info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) { 1822 for (info->chipwidth = FLASH_CFI_BY8; 1823 info->chipwidth <= info->portwidth; 1824 info->chipwidth <<= 1) 1825 if (__flash_detect_cfi(info, qry)) 1826 return 1; 1827 } 1828 debug ("not found\n"); 1829 return 0; 1830 } 1831 1832 /* 1833 * Manufacturer-specific quirks. Add workarounds for geometry 1834 * reversal, etc. here. 1835 */ 1836 static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry) 1837 { 1838 /* check if flash geometry needs reversal */ 1839 if (qry->num_erase_regions > 1) { 1840 /* reverse geometry if top boot part */ 1841 if (info->cfi_version < 0x3131) { 1842 /* CFI < 1.1, try to guess from device id */ 1843 if ((info->device_id & 0x80) != 0) 1844 cfi_reverse_geometry(qry); 1845 } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { 1846 /* CFI >= 1.1, deduct from top/bottom flag */ 1847 /* note: ext_addr is valid since cfi_version > 0 */ 1848 cfi_reverse_geometry(qry); 1849 } 1850 } 1851 } 1852 1853 static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry) 1854 { 1855 int reverse_geometry = 0; 1856 1857 /* Check the "top boot" bit in the PRI */ 1858 if (info->ext_addr && !(flash_read_uchar(info, info->ext_addr + 6) & 1)) 1859 reverse_geometry = 1; 1860 1861 /* AT49BV6416(T) list the erase regions in the wrong order. 1862 * However, the device ID is identical with the non-broken 1863 * AT49BV642D they differ in the high byte. 1864 */ 1865 if (info->device_id == 0xd6 || info->device_id == 0xd2) 1866 reverse_geometry = !reverse_geometry; 1867 1868 if (reverse_geometry) 1869 cfi_reverse_geometry(qry); 1870 } 1871 1872 static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) 1873 { 1874 /* check if flash geometry needs reversal */ 1875 if (qry->num_erase_regions > 1) { 1876 /* reverse geometry if top boot part */ 1877 if (info->cfi_version < 0x3131) { 1878 /* CFI < 1.1, guess by device id */ 1879 if (info->device_id == 0x22CA || /* M29W320DT */ 1880 info->device_id == 0x2256 || /* M29W320ET */ 1881 info->device_id == 0x22D7) { /* M29W800DT */ 1882 cfi_reverse_geometry(qry); 1883 } 1884 } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { 1885 /* CFI >= 1.1, deduct from top/bottom flag */ 1886 /* note: ext_addr is valid since cfi_version > 0 */ 1887 cfi_reverse_geometry(qry); 1888 } 1889 } 1890 } 1891 1892 /* 1893 * The following code cannot be run from FLASH! 1894 * 1895 */ 1896 ulong flash_get_size (phys_addr_t base, int banknum) 1897 { 1898 flash_info_t *info = &flash_info[banknum]; 1899 int i, j; 1900 flash_sect_t sect_cnt; 1901 phys_addr_t sector; 1902 unsigned long tmp; 1903 int size_ratio; 1904 uchar num_erase_regions; 1905 int erase_region_size; 1906 int erase_region_count; 1907 struct cfi_qry qry; 1908 unsigned long max_size; 1909 1910 memset(&qry, 0, sizeof(qry)); 1911 1912 info->ext_addr = 0; 1913 info->cfi_version = 0; 1914 #ifdef CONFIG_SYS_FLASH_PROTECTION 1915 info->legacy_unlock = 0; 1916 #endif 1917 1918 info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE); 1919 1920 if (flash_detect_cfi (info, &qry)) { 1921 info->vendor = le16_to_cpu(qry.p_id); 1922 info->ext_addr = le16_to_cpu(qry.p_adr); 1923 num_erase_regions = qry.num_erase_regions; 1924 1925 if (info->ext_addr) { 1926 info->cfi_version = (ushort) flash_read_uchar (info, 1927 info->ext_addr + 3) << 8; 1928 info->cfi_version |= (ushort) flash_read_uchar (info, 1929 info->ext_addr + 4); 1930 } 1931 1932 #ifdef DEBUG 1933 flash_printqry (&qry); 1934 #endif 1935 1936 switch (info->vendor) { 1937 case CFI_CMDSET_INTEL_PROG_REGIONS: 1938 case CFI_CMDSET_INTEL_STANDARD: 1939 case CFI_CMDSET_INTEL_EXTENDED: 1940 cmdset_intel_init(info, &qry); 1941 break; 1942 case CFI_CMDSET_AMD_STANDARD: 1943 case CFI_CMDSET_AMD_EXTENDED: 1944 cmdset_amd_init(info, &qry); 1945 break; 1946 default: 1947 printf("CFI: Unknown command set 0x%x\n", 1948 info->vendor); 1949 /* 1950 * Unfortunately, this means we don't know how 1951 * to get the chip back to Read mode. Might 1952 * as well try an Intel-style reset... 1953 */ 1954 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1955 return 0; 1956 } 1957 1958 /* Do manufacturer-specific fixups */ 1959 switch (info->manufacturer_id) { 1960 case 0x0001: /* AMD */ 1961 case 0x0037: /* AMIC */ 1962 flash_fixup_amd(info, &qry); 1963 break; 1964 case 0x001f: 1965 flash_fixup_atmel(info, &qry); 1966 break; 1967 case 0x0020: 1968 flash_fixup_stm(info, &qry); 1969 break; 1970 } 1971 1972 debug ("manufacturer is %d\n", info->vendor); 1973 debug ("manufacturer id is 0x%x\n", info->manufacturer_id); 1974 debug ("device id is 0x%x\n", info->device_id); 1975 debug ("device id2 is 0x%x\n", info->device_id2); 1976 debug ("cfi version is 0x%04x\n", info->cfi_version); 1977 1978 size_ratio = info->portwidth / info->chipwidth; 1979 /* if the chip is x8/x16 reduce the ratio by half */ 1980 if ((info->interface == FLASH_CFI_X8X16) 1981 && (info->chipwidth == FLASH_CFI_BY8)) { 1982 size_ratio >>= 1; 1983 } 1984 debug ("size_ratio %d port %d bits chip %d bits\n", 1985 size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, 1986 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 1987 info->size = 1 << qry.dev_size; 1988 /* multiply the size by the number of chips */ 1989 info->size *= size_ratio; 1990 max_size = cfi_flash_bank_size(banknum); 1991 if (max_size && (info->size > max_size)) { 1992 debug("[truncated from %ldMiB]", info->size >> 20); 1993 info->size = max_size; 1994 } 1995 debug ("found %d erase regions\n", num_erase_regions); 1996 sect_cnt = 0; 1997 sector = base; 1998 for (i = 0; i < num_erase_regions; i++) { 1999 if (i > NUM_ERASE_REGIONS) { 2000 printf ("%d erase regions found, only %d used\n", 2001 num_erase_regions, NUM_ERASE_REGIONS); 2002 break; 2003 } 2004 2005 tmp = le32_to_cpu(qry.erase_region_info[i]); 2006 debug("erase region %u: 0x%08lx\n", i, tmp); 2007 2008 erase_region_count = (tmp & 0xffff) + 1; 2009 tmp >>= 16; 2010 erase_region_size = 2011 (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128; 2012 debug ("erase_region_count = %d erase_region_size = %d\n", 2013 erase_region_count, erase_region_size); 2014 for (j = 0; j < erase_region_count; j++) { 2015 if (sector - base >= info->size) 2016 break; 2017 if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { 2018 printf("ERROR: too many flash sectors\n"); 2019 break; 2020 } 2021 info->start[sect_cnt] = 2022 (ulong)map_physmem(sector, 2023 info->portwidth, 2024 MAP_NOCACHE); 2025 sector += (erase_region_size * size_ratio); 2026 2027 /* 2028 * Only read protection status from 2029 * supported devices (intel...) 2030 */ 2031 switch (info->vendor) { 2032 case CFI_CMDSET_INTEL_PROG_REGIONS: 2033 case CFI_CMDSET_INTEL_EXTENDED: 2034 case CFI_CMDSET_INTEL_STANDARD: 2035 /* 2036 * Set flash to read-id mode. Otherwise 2037 * reading protected status is not 2038 * guaranteed. 2039 */ 2040 flash_write_cmd(info, sect_cnt, 0, 2041 FLASH_CMD_READ_ID); 2042 info->protect[sect_cnt] = 2043 flash_isset (info, sect_cnt, 2044 FLASH_OFFSET_PROTECT, 2045 FLASH_STATUS_PROTECT); 2046 break; 2047 default: 2048 /* default: not protected */ 2049 info->protect[sect_cnt] = 0; 2050 } 2051 2052 sect_cnt++; 2053 } 2054 } 2055 2056 info->sector_count = sect_cnt; 2057 info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size); 2058 tmp = 1 << qry.block_erase_timeout_typ; 2059 info->erase_blk_tout = tmp * 2060 (1 << qry.block_erase_timeout_max); 2061 tmp = (1 << qry.buf_write_timeout_typ) * 2062 (1 << qry.buf_write_timeout_max); 2063 2064 /* round up when converting to ms */ 2065 info->buffer_write_tout = (tmp + 999) / 1000; 2066 tmp = (1 << qry.word_write_timeout_typ) * 2067 (1 << qry.word_write_timeout_max); 2068 /* round up when converting to ms */ 2069 info->write_tout = (tmp + 999) / 1000; 2070 info->flash_id = FLASH_MAN_CFI; 2071 if ((info->interface == FLASH_CFI_X8X16) && 2072 (info->chipwidth == FLASH_CFI_BY8)) { 2073 /* XXX - Need to test on x8/x16 in parallel. */ 2074 info->portwidth >>= 1; 2075 } 2076 2077 flash_write_cmd (info, 0, 0, info->cmd_reset); 2078 } 2079 2080 return (info->size); 2081 } 2082 2083 #ifdef CONFIG_FLASH_CFI_MTD 2084 void flash_set_verbose(uint v) 2085 { 2086 flash_verbose = v; 2087 } 2088 #endif 2089 2090 static void cfi_flash_set_config_reg(u32 base, u16 val) 2091 { 2092 #ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS 2093 /* 2094 * Only set this config register if really defined 2095 * to a valid value (0xffff is invalid) 2096 */ 2097 if (val == 0xffff) 2098 return; 2099 2100 /* 2101 * Set configuration register. Data is "encrypted" in the 16 lower 2102 * address bits. 2103 */ 2104 flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1))); 2105 flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1))); 2106 2107 /* 2108 * Finally issue reset-command to bring device back to 2109 * read-array mode 2110 */ 2111 flash_write16(FLASH_CMD_RESET, (void *)base); 2112 #endif 2113 } 2114 2115 /*----------------------------------------------------------------------- 2116 */ 2117 2118 void flash_protect_default(void) 2119 { 2120 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) 2121 int i; 2122 struct apl_s { 2123 ulong start; 2124 ulong size; 2125 } apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST; 2126 #endif 2127 2128 /* Monitor protection ON by default */ 2129 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ 2130 (!defined(CONFIG_MONITOR_IS_IN_RAM)) 2131 flash_protect(FLAG_PROTECT_SET, 2132 CONFIG_SYS_MONITOR_BASE, 2133 CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, 2134 flash_get_info(CONFIG_SYS_MONITOR_BASE)); 2135 #endif 2136 2137 /* Environment protection ON by default */ 2138 #ifdef CONFIG_ENV_IS_IN_FLASH 2139 flash_protect(FLAG_PROTECT_SET, 2140 CONFIG_ENV_ADDR, 2141 CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, 2142 flash_get_info(CONFIG_ENV_ADDR)); 2143 #endif 2144 2145 /* Redundant environment protection ON by default */ 2146 #ifdef CONFIG_ENV_ADDR_REDUND 2147 flash_protect(FLAG_PROTECT_SET, 2148 CONFIG_ENV_ADDR_REDUND, 2149 CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, 2150 flash_get_info(CONFIG_ENV_ADDR_REDUND)); 2151 #endif 2152 2153 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) 2154 for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) { 2155 debug("autoprotecting from %08lx to %08lx\n", 2156 apl[i].start, apl[i].start + apl[i].size - 1); 2157 flash_protect(FLAG_PROTECT_SET, 2158 apl[i].start, 2159 apl[i].start + apl[i].size - 1, 2160 flash_get_info(apl[i].start)); 2161 } 2162 #endif 2163 } 2164 2165 unsigned long flash_init (void) 2166 { 2167 unsigned long size = 0; 2168 int i; 2169 2170 #ifdef CONFIG_SYS_FLASH_PROTECTION 2171 /* read environment from EEPROM */ 2172 char s[64]; 2173 getenv_f("unlock", s, sizeof(s)); 2174 #endif 2175 2176 /* Init: no FLASHes known */ 2177 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { 2178 flash_info[i].flash_id = FLASH_UNKNOWN; 2179 2180 /* Optionally write flash configuration register */ 2181 cfi_flash_set_config_reg(cfi_flash_bank_addr(i), 2182 cfi_flash_config_reg(i)); 2183 2184 if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) 2185 flash_get_size(cfi_flash_bank_addr(i), i); 2186 size += flash_info[i].size; 2187 if (flash_info[i].flash_id == FLASH_UNKNOWN) { 2188 #ifndef CONFIG_SYS_FLASH_QUIET_TEST 2189 printf ("## Unknown flash on Bank %d " 2190 "- Size = 0x%08lx = %ld MB\n", 2191 i+1, flash_info[i].size, 2192 flash_info[i].size >> 20); 2193 #endif /* CONFIG_SYS_FLASH_QUIET_TEST */ 2194 } 2195 #ifdef CONFIG_SYS_FLASH_PROTECTION 2196 else if ((s != NULL) && (strcmp(s, "yes") == 0)) { 2197 /* 2198 * Only the U-Boot image and it's environment 2199 * is protected, all other sectors are 2200 * unprotected (unlocked) if flash hardware 2201 * protection is used (CONFIG_SYS_FLASH_PROTECTION) 2202 * and the environment variable "unlock" is 2203 * set to "yes". 2204 */ 2205 if (flash_info[i].legacy_unlock) { 2206 int k; 2207 2208 /* 2209 * Disable legacy_unlock temporarily, 2210 * since flash_real_protect would 2211 * relock all other sectors again 2212 * otherwise. 2213 */ 2214 flash_info[i].legacy_unlock = 0; 2215 2216 /* 2217 * Legacy unlocking (e.g. Intel J3) -> 2218 * unlock only one sector. This will 2219 * unlock all sectors. 2220 */ 2221 flash_real_protect (&flash_info[i], 0, 0); 2222 2223 flash_info[i].legacy_unlock = 1; 2224 2225 /* 2226 * Manually mark other sectors as 2227 * unlocked (unprotected) 2228 */ 2229 for (k = 1; k < flash_info[i].sector_count; k++) 2230 flash_info[i].protect[k] = 0; 2231 } else { 2232 /* 2233 * No legancy unlocking -> unlock all sectors 2234 */ 2235 flash_protect (FLAG_PROTECT_CLEAR, 2236 flash_info[i].start[0], 2237 flash_info[i].start[0] 2238 + flash_info[i].size - 1, 2239 &flash_info[i]); 2240 } 2241 } 2242 #endif /* CONFIG_SYS_FLASH_PROTECTION */ 2243 } 2244 2245 flash_protect_default(); 2246 #ifdef CONFIG_FLASH_CFI_MTD 2247 cfi_mtd_init(); 2248 #endif 2249 2250 return (size); 2251 } 2252