1 /* 2 * (C) Copyright 2002-2004 3 * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com 4 * 5 * Copyright (C) 2003 Arabella Software Ltd. 6 * Yuli Barcohen <yuli@arabellasw.com> 7 * 8 * Copyright (C) 2004 9 * Ed Okerson 10 * 11 * Copyright (C) 2006 12 * Tolunay Orkun <listmember@orkun.us> 13 * 14 * See file CREDITS for list of people who contributed to this 15 * project. 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License as 19 * published by the Free Software Foundation; either version 2 of 20 * the License, or (at your option) any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 * You should have received a copy of the GNU General Public License 28 * along with this program; if not, write to the Free Software 29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 30 * MA 02111-1307 USA 31 * 32 */ 33 34 /* The DEBUG define must be before common to enable debugging */ 35 /* #define DEBUG */ 36 37 #include <common.h> 38 #include <asm/processor.h> 39 #include <asm/io.h> 40 #include <asm/byteorder.h> 41 #include <environment.h> 42 #include <mtd/cfi_flash.h> 43 #include <watchdog.h> 44 45 /* 46 * This file implements a Common Flash Interface (CFI) driver for 47 * U-Boot. 48 * 49 * The width of the port and the width of the chips are determined at 50 * initialization. These widths are used to calculate the address for 51 * access CFI data structures. 52 * 53 * References 54 * JEDEC Standard JESD68 - Common Flash Interface (CFI) 55 * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes 56 * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets 57 * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet 58 * AMD CFI Specification, Release 2.0 December 1, 2001 59 * AMD/Spansion Application Note: Migration from Single-byte to Three-byte 60 * Device IDs, Publication Number 25538 Revision A, November 8, 2001 61 * 62 * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between 63 * reading and writing ... (yes there is such a Hardware). 64 */ 65 66 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT }; 67 #ifdef CONFIG_FLASH_CFI_MTD 68 static uint flash_verbose = 1; 69 #else 70 #define flash_verbose 1 71 #endif 72 73 flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */ 74 75 /* 76 * Check if chip width is defined. If not, start detecting with 8bit. 77 */ 78 #ifndef CONFIG_SYS_FLASH_CFI_WIDTH 79 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT 80 #endif 81 82 /* 83 * 0xffff is an undefined value for the configuration register. When 84 * this value is returned, the configuration register shall not be 85 * written at all (default mode). 86 */ 87 static u16 cfi_flash_config_reg(int i) 88 { 89 #ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS 90 return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i]; 91 #else 92 return 0xffff; 93 #endif 94 } 95 96 #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) 97 int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT; 98 #endif 99 100 static phys_addr_t __cfi_flash_bank_addr(int i) 101 { 102 return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i]; 103 } 104 phys_addr_t cfi_flash_bank_addr(int i) 105 __attribute__((weak, alias("__cfi_flash_bank_addr"))); 106 107 static unsigned long __cfi_flash_bank_size(int i) 108 { 109 #ifdef CONFIG_SYS_FLASH_BANKS_SIZES 110 return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; 111 #else 112 return 0; 113 #endif 114 } 115 unsigned long cfi_flash_bank_size(int i) 116 __attribute__((weak, alias("__cfi_flash_bank_size"))); 117 118 static void __flash_write8(u8 value, void *addr) 119 { 120 __raw_writeb(value, addr); 121 } 122 123 static void __flash_write16(u16 value, void *addr) 124 { 125 __raw_writew(value, addr); 126 } 127 128 static void __flash_write32(u32 value, void *addr) 129 { 130 __raw_writel(value, addr); 131 } 132 133 static void __flash_write64(u64 value, void *addr) 134 { 135 /* No architectures currently implement __raw_writeq() */ 136 *(volatile u64 *)addr = value; 137 } 138 139 static u8 __flash_read8(void *addr) 140 { 141 return __raw_readb(addr); 142 } 143 144 static u16 __flash_read16(void *addr) 145 { 146 return __raw_readw(addr); 147 } 148 149 static u32 __flash_read32(void *addr) 150 { 151 return __raw_readl(addr); 152 } 153 154 static u64 __flash_read64(void *addr) 155 { 156 /* No architectures currently implement __raw_readq() */ 157 return *(volatile u64 *)addr; 158 } 159 160 #ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 161 void flash_write8(u8 value, void *addr)__attribute__((weak, alias("__flash_write8"))); 162 void flash_write16(u16 value, void *addr)__attribute__((weak, alias("__flash_write16"))); 163 void flash_write32(u32 value, void *addr)__attribute__((weak, alias("__flash_write32"))); 164 void flash_write64(u64 value, void *addr)__attribute__((weak, alias("__flash_write64"))); 165 u8 flash_read8(void *addr)__attribute__((weak, alias("__flash_read8"))); 166 u16 flash_read16(void *addr)__attribute__((weak, alias("__flash_read16"))); 167 u32 flash_read32(void *addr)__attribute__((weak, alias("__flash_read32"))); 168 u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); 169 #else 170 #define flash_write8 __flash_write8 171 #define flash_write16 __flash_write16 172 #define flash_write32 __flash_write32 173 #define flash_write64 __flash_write64 174 #define flash_read8 __flash_read8 175 #define flash_read16 __flash_read16 176 #define flash_read32 __flash_read32 177 #define flash_read64 __flash_read64 178 #endif 179 180 /*----------------------------------------------------------------------- 181 */ 182 #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) 183 flash_info_t *flash_get_info(ulong base) 184 { 185 int i; 186 flash_info_t *info = NULL; 187 188 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { 189 info = & flash_info[i]; 190 if (info->size && info->start[0] <= base && 191 base <= info->start[0] + info->size - 1) 192 break; 193 } 194 195 return info; 196 } 197 #endif 198 199 unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect) 200 { 201 if (sect != (info->sector_count - 1)) 202 return info->start[sect + 1] - info->start[sect]; 203 else 204 return info->start[0] + info->size - info->start[sect]; 205 } 206 207 /*----------------------------------------------------------------------- 208 * create an address based on the offset and the port width 209 */ 210 static inline void * 211 flash_map (flash_info_t * info, flash_sect_t sect, uint offset) 212 { 213 unsigned int byte_offset = offset * info->portwidth; 214 215 return (void *)(info->start[sect] + byte_offset); 216 } 217 218 static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, 219 unsigned int offset, void *addr) 220 { 221 } 222 223 /*----------------------------------------------------------------------- 224 * make a proper sized command based on the port and chip widths 225 */ 226 static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) 227 { 228 int i; 229 int cword_offset; 230 int cp_offset; 231 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 232 u32 cmd_le = cpu_to_le32(cmd); 233 #endif 234 uchar val; 235 uchar *cp = (uchar *) cmdbuf; 236 237 for (i = info->portwidth; i > 0; i--){ 238 cword_offset = (info->portwidth-i)%info->chipwidth; 239 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 240 cp_offset = info->portwidth - i; 241 val = *((uchar*)&cmd_le + cword_offset); 242 #else 243 cp_offset = i - 1; 244 val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1); 245 #endif 246 cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val; 247 } 248 } 249 250 #ifdef DEBUG 251 /*----------------------------------------------------------------------- 252 * Debug support 253 */ 254 static void print_longlong (char *str, unsigned long long data) 255 { 256 int i; 257 char *cp; 258 259 cp = (char *) &data; 260 for (i = 0; i < 8; i++) 261 sprintf (&str[i * 2], "%2.2x", *cp++); 262 } 263 264 static void flash_printqry (struct cfi_qry *qry) 265 { 266 u8 *p = (u8 *)qry; 267 int x, y; 268 269 for (x = 0; x < sizeof(struct cfi_qry); x += 16) { 270 debug("%02x : ", x); 271 for (y = 0; y < 16; y++) 272 debug("%2.2x ", p[x + y]); 273 debug(" "); 274 for (y = 0; y < 16; y++) { 275 unsigned char c = p[x + y]; 276 if (c >= 0x20 && c <= 0x7e) 277 debug("%c", c); 278 else 279 debug("."); 280 } 281 debug("\n"); 282 } 283 } 284 #endif 285 286 287 /*----------------------------------------------------------------------- 288 * read a character at a port width address 289 */ 290 static inline uchar flash_read_uchar (flash_info_t * info, uint offset) 291 { 292 uchar *cp; 293 uchar retval; 294 295 cp = flash_map (info, 0, offset); 296 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 297 retval = flash_read8(cp); 298 #else 299 retval = flash_read8(cp + info->portwidth - 1); 300 #endif 301 flash_unmap (info, 0, offset, cp); 302 return retval; 303 } 304 305 /*----------------------------------------------------------------------- 306 * read a word at a port width address, assume 16bit bus 307 */ 308 static inline ushort flash_read_word (flash_info_t * info, uint offset) 309 { 310 ushort *addr, retval; 311 312 addr = flash_map (info, 0, offset); 313 retval = flash_read16 (addr); 314 flash_unmap (info, 0, offset, addr); 315 return retval; 316 } 317 318 319 /*----------------------------------------------------------------------- 320 * read a long word by picking the least significant byte of each maximum 321 * port size word. Swap for ppc format. 322 */ 323 static ulong flash_read_long (flash_info_t * info, flash_sect_t sect, 324 uint offset) 325 { 326 uchar *addr; 327 ulong retval; 328 329 #ifdef DEBUG 330 int x; 331 #endif 332 addr = flash_map (info, sect, offset); 333 334 #ifdef DEBUG 335 debug ("long addr is at %p info->portwidth = %d\n", addr, 336 info->portwidth); 337 for (x = 0; x < 4 * info->portwidth; x++) { 338 debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x)); 339 } 340 #endif 341 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 342 retval = ((flash_read8(addr) << 16) | 343 (flash_read8(addr + info->portwidth) << 24) | 344 (flash_read8(addr + 2 * info->portwidth)) | 345 (flash_read8(addr + 3 * info->portwidth) << 8)); 346 #else 347 retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) | 348 (flash_read8(addr + info->portwidth - 1) << 16) | 349 (flash_read8(addr + 4 * info->portwidth - 1) << 8) | 350 (flash_read8(addr + 3 * info->portwidth - 1))); 351 #endif 352 flash_unmap(info, sect, offset, addr); 353 354 return retval; 355 } 356 357 /* 358 * Write a proper sized command to the correct address 359 */ 360 void flash_write_cmd (flash_info_t * info, flash_sect_t sect, 361 uint offset, u32 cmd) 362 { 363 364 void *addr; 365 cfiword_t cword; 366 367 addr = flash_map (info, sect, offset); 368 flash_make_cmd (info, cmd, &cword); 369 switch (info->portwidth) { 370 case FLASH_CFI_8BIT: 371 debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd, 372 cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 373 flash_write8(cword.c, addr); 374 break; 375 case FLASH_CFI_16BIT: 376 debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr, 377 cmd, cword.w, 378 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 379 flash_write16(cword.w, addr); 380 break; 381 case FLASH_CFI_32BIT: 382 debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr, 383 cmd, cword.l, 384 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 385 flash_write32(cword.l, addr); 386 break; 387 case FLASH_CFI_64BIT: 388 #ifdef DEBUG 389 { 390 char str[20]; 391 392 print_longlong (str, cword.ll); 393 394 debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n", 395 addr, cmd, str, 396 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 397 } 398 #endif 399 flash_write64(cword.ll, addr); 400 break; 401 } 402 403 /* Ensure all the instructions are fully finished */ 404 sync(); 405 406 flash_unmap(info, sect, offset, addr); 407 } 408 409 static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect) 410 { 411 flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_UNLOCK_START); 412 flash_write_cmd (info, sect, info->addr_unlock2, AMD_CMD_UNLOCK_ACK); 413 } 414 415 /*----------------------------------------------------------------------- 416 */ 417 static int flash_isequal (flash_info_t * info, flash_sect_t sect, 418 uint offset, uchar cmd) 419 { 420 void *addr; 421 cfiword_t cword; 422 int retval; 423 424 addr = flash_map (info, sect, offset); 425 flash_make_cmd (info, cmd, &cword); 426 427 debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr); 428 switch (info->portwidth) { 429 case FLASH_CFI_8BIT: 430 debug ("is= %x %x\n", flash_read8(addr), cword.c); 431 retval = (flash_read8(addr) == cword.c); 432 break; 433 case FLASH_CFI_16BIT: 434 debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w); 435 retval = (flash_read16(addr) == cword.w); 436 break; 437 case FLASH_CFI_32BIT: 438 debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l); 439 retval = (flash_read32(addr) == cword.l); 440 break; 441 case FLASH_CFI_64BIT: 442 #ifdef DEBUG 443 { 444 char str1[20]; 445 char str2[20]; 446 447 print_longlong (str1, flash_read64(addr)); 448 print_longlong (str2, cword.ll); 449 debug ("is= %s %s\n", str1, str2); 450 } 451 #endif 452 retval = (flash_read64(addr) == cword.ll); 453 break; 454 default: 455 retval = 0; 456 break; 457 } 458 flash_unmap(info, sect, offset, addr); 459 460 return retval; 461 } 462 463 /*----------------------------------------------------------------------- 464 */ 465 static int flash_isset (flash_info_t * info, flash_sect_t sect, 466 uint offset, uchar cmd) 467 { 468 void *addr; 469 cfiword_t cword; 470 int retval; 471 472 addr = flash_map (info, sect, offset); 473 flash_make_cmd (info, cmd, &cword); 474 switch (info->portwidth) { 475 case FLASH_CFI_8BIT: 476 retval = ((flash_read8(addr) & cword.c) == cword.c); 477 break; 478 case FLASH_CFI_16BIT: 479 retval = ((flash_read16(addr) & cword.w) == cword.w); 480 break; 481 case FLASH_CFI_32BIT: 482 retval = ((flash_read32(addr) & cword.l) == cword.l); 483 break; 484 case FLASH_CFI_64BIT: 485 retval = ((flash_read64(addr) & cword.ll) == cword.ll); 486 break; 487 default: 488 retval = 0; 489 break; 490 } 491 flash_unmap(info, sect, offset, addr); 492 493 return retval; 494 } 495 496 /*----------------------------------------------------------------------- 497 */ 498 static int flash_toggle (flash_info_t * info, flash_sect_t sect, 499 uint offset, uchar cmd) 500 { 501 void *addr; 502 cfiword_t cword; 503 int retval; 504 505 addr = flash_map (info, sect, offset); 506 flash_make_cmd (info, cmd, &cword); 507 switch (info->portwidth) { 508 case FLASH_CFI_8BIT: 509 retval = flash_read8(addr) != flash_read8(addr); 510 break; 511 case FLASH_CFI_16BIT: 512 retval = flash_read16(addr) != flash_read16(addr); 513 break; 514 case FLASH_CFI_32BIT: 515 retval = flash_read32(addr) != flash_read32(addr); 516 break; 517 case FLASH_CFI_64BIT: 518 retval = ( (flash_read32( addr ) != flash_read32( addr )) || 519 (flash_read32(addr+4) != flash_read32(addr+4)) ); 520 break; 521 default: 522 retval = 0; 523 break; 524 } 525 flash_unmap(info, sect, offset, addr); 526 527 return retval; 528 } 529 530 /* 531 * flash_is_busy - check to see if the flash is busy 532 * 533 * This routine checks the status of the chip and returns true if the 534 * chip is busy. 535 */ 536 static int flash_is_busy (flash_info_t * info, flash_sect_t sect) 537 { 538 int retval; 539 540 switch (info->vendor) { 541 case CFI_CMDSET_INTEL_PROG_REGIONS: 542 case CFI_CMDSET_INTEL_STANDARD: 543 case CFI_CMDSET_INTEL_EXTENDED: 544 retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE); 545 break; 546 case CFI_CMDSET_AMD_STANDARD: 547 case CFI_CMDSET_AMD_EXTENDED: 548 #ifdef CONFIG_FLASH_CFI_LEGACY 549 case CFI_CMDSET_AMD_LEGACY: 550 #endif 551 retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE); 552 break; 553 default: 554 retval = 0; 555 } 556 debug ("flash_is_busy: %d\n", retval); 557 return retval; 558 } 559 560 /*----------------------------------------------------------------------- 561 * wait for XSR.7 to be set. Time out with an error if it does not. 562 * This routine does not set the flash to read-array mode. 563 */ 564 static int flash_status_check (flash_info_t * info, flash_sect_t sector, 565 ulong tout, char *prompt) 566 { 567 ulong start; 568 569 #if CONFIG_SYS_HZ != 1000 570 if ((ulong)CONFIG_SYS_HZ > 100000) 571 tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */ 572 else 573 tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000); 574 #endif 575 576 /* Wait for command completion */ 577 #ifdef CONFIG_SYS_LOW_RES_TIMER 578 reset_timer(); 579 #endif 580 start = get_timer (0); 581 WATCHDOG_RESET(); 582 while (flash_is_busy (info, sector)) { 583 if (get_timer (start) > tout) { 584 printf ("Flash %s timeout at address %lx data %lx\n", 585 prompt, info->start[sector], 586 flash_read_long (info, sector, 0)); 587 flash_write_cmd (info, sector, 0, info->cmd_reset); 588 udelay(1); 589 return ERR_TIMOUT; 590 } 591 udelay (1); /* also triggers watchdog */ 592 } 593 return ERR_OK; 594 } 595 596 /*----------------------------------------------------------------------- 597 * Wait for XSR.7 to be set, if it times out print an error, otherwise 598 * do a full status check. 599 * 600 * This routine sets the flash to read-array mode. 601 */ 602 static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, 603 ulong tout, char *prompt) 604 { 605 int retcode; 606 607 retcode = flash_status_check (info, sector, tout, prompt); 608 switch (info->vendor) { 609 case CFI_CMDSET_INTEL_PROG_REGIONS: 610 case CFI_CMDSET_INTEL_EXTENDED: 611 case CFI_CMDSET_INTEL_STANDARD: 612 if ((retcode != ERR_OK) 613 && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { 614 retcode = ERR_INVAL; 615 printf ("Flash %s error at address %lx\n", prompt, 616 info->start[sector]); 617 if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS | 618 FLASH_STATUS_PSLBS)) { 619 puts ("Command Sequence Error.\n"); 620 } else if (flash_isset (info, sector, 0, 621 FLASH_STATUS_ECLBS)) { 622 puts ("Block Erase Error.\n"); 623 retcode = ERR_NOT_ERASED; 624 } else if (flash_isset (info, sector, 0, 625 FLASH_STATUS_PSLBS)) { 626 puts ("Locking Error\n"); 627 } 628 if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) { 629 puts ("Block locked.\n"); 630 retcode = ERR_PROTECTED; 631 } 632 if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS)) 633 puts ("Vpp Low Error.\n"); 634 } 635 flash_write_cmd (info, sector, 0, info->cmd_reset); 636 udelay(1); 637 break; 638 default: 639 break; 640 } 641 return retcode; 642 } 643 644 static int use_flash_status_poll(flash_info_t *info) 645 { 646 #ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL 647 if (info->vendor == CFI_CMDSET_AMD_EXTENDED || 648 info->vendor == CFI_CMDSET_AMD_STANDARD) 649 return 1; 650 #endif 651 return 0; 652 } 653 654 static int flash_status_poll(flash_info_t *info, void *src, void *dst, 655 ulong tout, char *prompt) 656 { 657 #ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL 658 ulong start; 659 int ready; 660 661 #if CONFIG_SYS_HZ != 1000 662 if ((ulong)CONFIG_SYS_HZ > 100000) 663 tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */ 664 else 665 tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000); 666 #endif 667 668 /* Wait for command completion */ 669 #ifdef CONFIG_SYS_LOW_RES_TIMER 670 reset_timer(); 671 #endif 672 start = get_timer(0); 673 WATCHDOG_RESET(); 674 while (1) { 675 switch (info->portwidth) { 676 case FLASH_CFI_8BIT: 677 ready = flash_read8(dst) == flash_read8(src); 678 break; 679 case FLASH_CFI_16BIT: 680 ready = flash_read16(dst) == flash_read16(src); 681 break; 682 case FLASH_CFI_32BIT: 683 ready = flash_read32(dst) == flash_read32(src); 684 break; 685 case FLASH_CFI_64BIT: 686 ready = flash_read64(dst) == flash_read64(src); 687 break; 688 default: 689 ready = 0; 690 break; 691 } 692 if (ready) 693 break; 694 if (get_timer(start) > tout) { 695 printf("Flash %s timeout at address %lx data %lx\n", 696 prompt, (ulong)dst, (ulong)flash_read8(dst)); 697 return ERR_TIMOUT; 698 } 699 udelay(1); /* also triggers watchdog */ 700 } 701 #endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */ 702 return ERR_OK; 703 } 704 705 /*----------------------------------------------------------------------- 706 */ 707 static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) 708 { 709 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 710 unsigned short w; 711 unsigned int l; 712 unsigned long long ll; 713 #endif 714 715 switch (info->portwidth) { 716 case FLASH_CFI_8BIT: 717 cword->c = c; 718 break; 719 case FLASH_CFI_16BIT: 720 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 721 w = c; 722 w <<= 8; 723 cword->w = (cword->w >> 8) | w; 724 #else 725 cword->w = (cword->w << 8) | c; 726 #endif 727 break; 728 case FLASH_CFI_32BIT: 729 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 730 l = c; 731 l <<= 24; 732 cword->l = (cword->l >> 8) | l; 733 #else 734 cword->l = (cword->l << 8) | c; 735 #endif 736 break; 737 case FLASH_CFI_64BIT: 738 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) 739 ll = c; 740 ll <<= 56; 741 cword->ll = (cword->ll >> 8) | ll; 742 #else 743 cword->ll = (cword->ll << 8) | c; 744 #endif 745 break; 746 } 747 } 748 749 /* 750 * Loop through the sector table starting from the previously found sector. 751 * Searches forwards or backwards, dependent on the passed address. 752 */ 753 static flash_sect_t find_sector (flash_info_t * info, ulong addr) 754 { 755 static flash_sect_t saved_sector; /* previously found sector */ 756 static flash_info_t *saved_info; /* previously used flash bank */ 757 flash_sect_t sector = saved_sector; 758 759 if ((info != saved_info) || (sector >= info->sector_count)) 760 sector = 0; 761 762 while ((info->start[sector] < addr) 763 && (sector < info->sector_count - 1)) 764 sector++; 765 while ((info->start[sector] > addr) && (sector > 0)) 766 /* 767 * also decrements the sector in case of an overshot 768 * in the first loop 769 */ 770 sector--; 771 772 saved_sector = sector; 773 saved_info = info; 774 return sector; 775 } 776 777 /*----------------------------------------------------------------------- 778 */ 779 static int flash_write_cfiword (flash_info_t * info, ulong dest, 780 cfiword_t cword) 781 { 782 void *dstaddr = (void *)dest; 783 int flag; 784 flash_sect_t sect = 0; 785 char sect_found = 0; 786 787 /* Check if Flash is (sufficiently) erased */ 788 switch (info->portwidth) { 789 case FLASH_CFI_8BIT: 790 flag = ((flash_read8(dstaddr) & cword.c) == cword.c); 791 break; 792 case FLASH_CFI_16BIT: 793 flag = ((flash_read16(dstaddr) & cword.w) == cword.w); 794 break; 795 case FLASH_CFI_32BIT: 796 flag = ((flash_read32(dstaddr) & cword.l) == cword.l); 797 break; 798 case FLASH_CFI_64BIT: 799 flag = ((flash_read64(dstaddr) & cword.ll) == cword.ll); 800 break; 801 default: 802 flag = 0; 803 break; 804 } 805 if (!flag) 806 return ERR_NOT_ERASED; 807 808 /* Disable interrupts which might cause a timeout here */ 809 flag = disable_interrupts (); 810 811 switch (info->vendor) { 812 case CFI_CMDSET_INTEL_PROG_REGIONS: 813 case CFI_CMDSET_INTEL_EXTENDED: 814 case CFI_CMDSET_INTEL_STANDARD: 815 flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS); 816 flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE); 817 break; 818 case CFI_CMDSET_AMD_EXTENDED: 819 case CFI_CMDSET_AMD_STANDARD: 820 sect = find_sector(info, dest); 821 flash_unlock_seq (info, sect); 822 flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE); 823 sect_found = 1; 824 break; 825 #ifdef CONFIG_FLASH_CFI_LEGACY 826 case CFI_CMDSET_AMD_LEGACY: 827 sect = find_sector(info, dest); 828 flash_unlock_seq (info, 0); 829 flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE); 830 sect_found = 1; 831 break; 832 #endif 833 } 834 835 switch (info->portwidth) { 836 case FLASH_CFI_8BIT: 837 flash_write8(cword.c, dstaddr); 838 break; 839 case FLASH_CFI_16BIT: 840 flash_write16(cword.w, dstaddr); 841 break; 842 case FLASH_CFI_32BIT: 843 flash_write32(cword.l, dstaddr); 844 break; 845 case FLASH_CFI_64BIT: 846 flash_write64(cword.ll, dstaddr); 847 break; 848 } 849 850 /* re-enable interrupts if necessary */ 851 if (flag) 852 enable_interrupts (); 853 854 if (!sect_found) 855 sect = find_sector (info, dest); 856 857 if (use_flash_status_poll(info)) 858 return flash_status_poll(info, &cword, dstaddr, 859 info->write_tout, "write"); 860 else 861 return flash_full_status_check(info, sect, 862 info->write_tout, "write"); 863 } 864 865 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 866 867 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, 868 int len) 869 { 870 flash_sect_t sector; 871 int cnt; 872 int retcode; 873 void *src = cp; 874 void *dst = (void *)dest; 875 void *dst2 = dst; 876 int flag = 1; 877 uint offset = 0; 878 unsigned int shift; 879 uchar write_cmd; 880 881 switch (info->portwidth) { 882 case FLASH_CFI_8BIT: 883 shift = 0; 884 break; 885 case FLASH_CFI_16BIT: 886 shift = 1; 887 break; 888 case FLASH_CFI_32BIT: 889 shift = 2; 890 break; 891 case FLASH_CFI_64BIT: 892 shift = 3; 893 break; 894 default: 895 retcode = ERR_INVAL; 896 goto out_unmap; 897 } 898 899 cnt = len >> shift; 900 901 while ((cnt-- > 0) && (flag == 1)) { 902 switch (info->portwidth) { 903 case FLASH_CFI_8BIT: 904 flag = ((flash_read8(dst2) & flash_read8(src)) == 905 flash_read8(src)); 906 src += 1, dst2 += 1; 907 break; 908 case FLASH_CFI_16BIT: 909 flag = ((flash_read16(dst2) & flash_read16(src)) == 910 flash_read16(src)); 911 src += 2, dst2 += 2; 912 break; 913 case FLASH_CFI_32BIT: 914 flag = ((flash_read32(dst2) & flash_read32(src)) == 915 flash_read32(src)); 916 src += 4, dst2 += 4; 917 break; 918 case FLASH_CFI_64BIT: 919 flag = ((flash_read64(dst2) & flash_read64(src)) == 920 flash_read64(src)); 921 src += 8, dst2 += 8; 922 break; 923 } 924 } 925 if (!flag) { 926 retcode = ERR_NOT_ERASED; 927 goto out_unmap; 928 } 929 930 src = cp; 931 sector = find_sector (info, dest); 932 933 switch (info->vendor) { 934 case CFI_CMDSET_INTEL_PROG_REGIONS: 935 case CFI_CMDSET_INTEL_STANDARD: 936 case CFI_CMDSET_INTEL_EXTENDED: 937 write_cmd = (info->vendor == CFI_CMDSET_INTEL_PROG_REGIONS) ? 938 FLASH_CMD_WRITE_BUFFER_PROG : FLASH_CMD_WRITE_TO_BUFFER; 939 flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); 940 flash_write_cmd (info, sector, 0, FLASH_CMD_READ_STATUS); 941 flash_write_cmd (info, sector, 0, write_cmd); 942 retcode = flash_status_check (info, sector, 943 info->buffer_write_tout, 944 "write to buffer"); 945 if (retcode == ERR_OK) { 946 /* reduce the number of loops by the width of 947 * the port */ 948 cnt = len >> shift; 949 flash_write_cmd (info, sector, 0, cnt - 1); 950 while (cnt-- > 0) { 951 switch (info->portwidth) { 952 case FLASH_CFI_8BIT: 953 flash_write8(flash_read8(src), dst); 954 src += 1, dst += 1; 955 break; 956 case FLASH_CFI_16BIT: 957 flash_write16(flash_read16(src), dst); 958 src += 2, dst += 2; 959 break; 960 case FLASH_CFI_32BIT: 961 flash_write32(flash_read32(src), dst); 962 src += 4, dst += 4; 963 break; 964 case FLASH_CFI_64BIT: 965 flash_write64(flash_read64(src), dst); 966 src += 8, dst += 8; 967 break; 968 default: 969 retcode = ERR_INVAL; 970 goto out_unmap; 971 } 972 } 973 flash_write_cmd (info, sector, 0, 974 FLASH_CMD_WRITE_BUFFER_CONFIRM); 975 retcode = flash_full_status_check ( 976 info, sector, info->buffer_write_tout, 977 "buffer write"); 978 } 979 980 break; 981 982 case CFI_CMDSET_AMD_STANDARD: 983 case CFI_CMDSET_AMD_EXTENDED: 984 flash_unlock_seq(info,0); 985 986 #ifdef CONFIG_FLASH_SPANSION_S29WS_N 987 offset = ((unsigned long)dst - info->start[sector]) >> shift; 988 #endif 989 flash_write_cmd(info, sector, offset, AMD_CMD_WRITE_TO_BUFFER); 990 cnt = len >> shift; 991 flash_write_cmd(info, sector, offset, cnt - 1); 992 993 switch (info->portwidth) { 994 case FLASH_CFI_8BIT: 995 while (cnt-- > 0) { 996 flash_write8(flash_read8(src), dst); 997 src += 1, dst += 1; 998 } 999 break; 1000 case FLASH_CFI_16BIT: 1001 while (cnt-- > 0) { 1002 flash_write16(flash_read16(src), dst); 1003 src += 2, dst += 2; 1004 } 1005 break; 1006 case FLASH_CFI_32BIT: 1007 while (cnt-- > 0) { 1008 flash_write32(flash_read32(src), dst); 1009 src += 4, dst += 4; 1010 } 1011 break; 1012 case FLASH_CFI_64BIT: 1013 while (cnt-- > 0) { 1014 flash_write64(flash_read64(src), dst); 1015 src += 8, dst += 8; 1016 } 1017 break; 1018 default: 1019 retcode = ERR_INVAL; 1020 goto out_unmap; 1021 } 1022 1023 flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM); 1024 if (use_flash_status_poll(info)) 1025 retcode = flash_status_poll(info, src - (1 << shift), 1026 dst - (1 << shift), 1027 info->buffer_write_tout, 1028 "buffer write"); 1029 else 1030 retcode = flash_full_status_check(info, sector, 1031 info->buffer_write_tout, 1032 "buffer write"); 1033 break; 1034 1035 default: 1036 debug ("Unknown Command Set\n"); 1037 retcode = ERR_INVAL; 1038 break; 1039 } 1040 1041 out_unmap: 1042 return retcode; 1043 } 1044 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 1045 1046 1047 /*----------------------------------------------------------------------- 1048 */ 1049 int flash_erase (flash_info_t * info, int s_first, int s_last) 1050 { 1051 int rcode = 0; 1052 int prot; 1053 flash_sect_t sect; 1054 int st; 1055 1056 if (info->flash_id != FLASH_MAN_CFI) { 1057 puts ("Can't erase unknown flash type - aborted\n"); 1058 return 1; 1059 } 1060 if ((s_first < 0) || (s_first > s_last)) { 1061 puts ("- no sectors to erase\n"); 1062 return 1; 1063 } 1064 1065 prot = 0; 1066 for (sect = s_first; sect <= s_last; ++sect) { 1067 if (info->protect[sect]) { 1068 prot++; 1069 } 1070 } 1071 if (prot) { 1072 printf ("- Warning: %d protected sectors will not be erased!\n", 1073 prot); 1074 } else if (flash_verbose) { 1075 putc ('\n'); 1076 } 1077 1078 1079 for (sect = s_first; sect <= s_last; sect++) { 1080 if (ctrlc()) { 1081 printf("\n"); 1082 return 1; 1083 } 1084 1085 if (info->protect[sect] == 0) { /* not protected */ 1086 #ifdef CONFIG_SYS_FLASH_CHECK_BLANK_BEFORE_ERASE 1087 int k; 1088 int size; 1089 int erased; 1090 u32 *flash; 1091 1092 /* 1093 * Check if whole sector is erased 1094 */ 1095 size = flash_sector_size(info, sect); 1096 erased = 1; 1097 flash = (u32 *)info->start[sect]; 1098 /* divide by 4 for longword access */ 1099 size = size >> 2; 1100 for (k = 0; k < size; k++) { 1101 if (flash_read32(flash++) != 0xffffffff) { 1102 erased = 0; 1103 break; 1104 } 1105 } 1106 if (erased) { 1107 if (flash_verbose) 1108 putc(','); 1109 continue; 1110 } 1111 #endif 1112 switch (info->vendor) { 1113 case CFI_CMDSET_INTEL_PROG_REGIONS: 1114 case CFI_CMDSET_INTEL_STANDARD: 1115 case CFI_CMDSET_INTEL_EXTENDED: 1116 flash_write_cmd (info, sect, 0, 1117 FLASH_CMD_CLEAR_STATUS); 1118 flash_write_cmd (info, sect, 0, 1119 FLASH_CMD_BLOCK_ERASE); 1120 flash_write_cmd (info, sect, 0, 1121 FLASH_CMD_ERASE_CONFIRM); 1122 break; 1123 case CFI_CMDSET_AMD_STANDARD: 1124 case CFI_CMDSET_AMD_EXTENDED: 1125 flash_unlock_seq (info, sect); 1126 flash_write_cmd (info, sect, 1127 info->addr_unlock1, 1128 AMD_CMD_ERASE_START); 1129 flash_unlock_seq (info, sect); 1130 flash_write_cmd (info, sect, 0, 1131 info->cmd_erase_sector); 1132 break; 1133 #ifdef CONFIG_FLASH_CFI_LEGACY 1134 case CFI_CMDSET_AMD_LEGACY: 1135 flash_unlock_seq (info, 0); 1136 flash_write_cmd (info, 0, info->addr_unlock1, 1137 AMD_CMD_ERASE_START); 1138 flash_unlock_seq (info, 0); 1139 flash_write_cmd (info, sect, 0, 1140 AMD_CMD_ERASE_SECTOR); 1141 break; 1142 #endif 1143 default: 1144 debug ("Unkown flash vendor %d\n", 1145 info->vendor); 1146 break; 1147 } 1148 1149 if (use_flash_status_poll(info)) { 1150 cfiword_t cword; 1151 void *dest; 1152 cword.ll = 0xffffffffffffffffULL; 1153 dest = flash_map(info, sect, 0); 1154 st = flash_status_poll(info, &cword, dest, 1155 info->erase_blk_tout, "erase"); 1156 flash_unmap(info, sect, 0, dest); 1157 } else 1158 st = flash_full_status_check(info, sect, 1159 info->erase_blk_tout, 1160 "erase"); 1161 if (st) 1162 rcode = 1; 1163 else if (flash_verbose) 1164 putc ('.'); 1165 } 1166 } 1167 1168 if (flash_verbose) 1169 puts (" done\n"); 1170 1171 return rcode; 1172 } 1173 1174 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO 1175 static int sector_erased(flash_info_t *info, int i) 1176 { 1177 int k; 1178 int size; 1179 u32 *flash; 1180 1181 /* 1182 * Check if whole sector is erased 1183 */ 1184 size = flash_sector_size(info, i); 1185 flash = (u32 *)info->start[i]; 1186 /* divide by 4 for longword access */ 1187 size = size >> 2; 1188 1189 for (k = 0; k < size; k++) { 1190 if (flash_read32(flash++) != 0xffffffff) 1191 return 0; /* not erased */ 1192 } 1193 1194 return 1; /* erased */ 1195 } 1196 #endif /* CONFIG_SYS_FLASH_EMPTY_INFO */ 1197 1198 void flash_print_info (flash_info_t * info) 1199 { 1200 int i; 1201 1202 if (info->flash_id != FLASH_MAN_CFI) { 1203 puts ("missing or unknown FLASH type\n"); 1204 return; 1205 } 1206 1207 printf ("%s flash (%d x %d)", 1208 info->name, 1209 (info->portwidth << 3), (info->chipwidth << 3)); 1210 if (info->size < 1024*1024) 1211 printf (" Size: %ld kB in %d Sectors\n", 1212 info->size >> 10, info->sector_count); 1213 else 1214 printf (" Size: %ld MB in %d Sectors\n", 1215 info->size >> 20, info->sector_count); 1216 printf (" "); 1217 switch (info->vendor) { 1218 case CFI_CMDSET_INTEL_PROG_REGIONS: 1219 printf ("Intel Prog Regions"); 1220 break; 1221 case CFI_CMDSET_INTEL_STANDARD: 1222 printf ("Intel Standard"); 1223 break; 1224 case CFI_CMDSET_INTEL_EXTENDED: 1225 printf ("Intel Extended"); 1226 break; 1227 case CFI_CMDSET_AMD_STANDARD: 1228 printf ("AMD Standard"); 1229 break; 1230 case CFI_CMDSET_AMD_EXTENDED: 1231 printf ("AMD Extended"); 1232 break; 1233 #ifdef CONFIG_FLASH_CFI_LEGACY 1234 case CFI_CMDSET_AMD_LEGACY: 1235 printf ("AMD Legacy"); 1236 break; 1237 #endif 1238 default: 1239 printf ("Unknown (%d)", info->vendor); 1240 break; 1241 } 1242 printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x", 1243 info->manufacturer_id); 1244 printf (info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", 1245 info->device_id); 1246 if ((info->device_id & 0xff) == 0x7E) { 1247 printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", 1248 info->device_id2); 1249 } 1250 if ((info->vendor == CFI_CMDSET_AMD_STANDARD) && (info->legacy_unlock)) 1251 printf("\n Advanced Sector Protection (PPB) enabled"); 1252 printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n", 1253 info->erase_blk_tout, 1254 info->write_tout); 1255 if (info->buffer_size > 1) { 1256 printf (" Buffer write timeout: %ld ms, " 1257 "buffer size: %d bytes\n", 1258 info->buffer_write_tout, 1259 info->buffer_size); 1260 } 1261 1262 puts ("\n Sector Start Addresses:"); 1263 for (i = 0; i < info->sector_count; ++i) { 1264 if (ctrlc()) 1265 break; 1266 if ((i % 5) == 0) 1267 putc('\n'); 1268 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO 1269 /* print empty and read-only info */ 1270 printf (" %08lX %c %s ", 1271 info->start[i], 1272 sector_erased(info, i) ? 'E' : ' ', 1273 info->protect[i] ? "RO" : " "); 1274 #else /* ! CONFIG_SYS_FLASH_EMPTY_INFO */ 1275 printf (" %08lX %s ", 1276 info->start[i], 1277 info->protect[i] ? "RO" : " "); 1278 #endif 1279 } 1280 putc ('\n'); 1281 return; 1282 } 1283 1284 /*----------------------------------------------------------------------- 1285 * This is used in a few places in write_buf() to show programming 1286 * progress. Making it a function is nasty because it needs to do side 1287 * effect updates to digit and dots. Repeated code is nasty too, so 1288 * we define it once here. 1289 */ 1290 #ifdef CONFIG_FLASH_SHOW_PROGRESS 1291 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \ 1292 if (flash_verbose) { \ 1293 dots -= dots_sub; \ 1294 if ((scale > 0) && (dots <= 0)) { \ 1295 if ((digit % 5) == 0) \ 1296 printf ("%d", digit / 5); \ 1297 else \ 1298 putc ('.'); \ 1299 digit--; \ 1300 dots += scale; \ 1301 } \ 1302 } 1303 #else 1304 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) 1305 #endif 1306 1307 /*----------------------------------------------------------------------- 1308 * Copy memory to flash, returns: 1309 * 0 - OK 1310 * 1 - write timeout 1311 * 2 - Flash not erased 1312 */ 1313 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) 1314 { 1315 ulong wp; 1316 uchar *p; 1317 int aln; 1318 cfiword_t cword; 1319 int i, rc; 1320 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1321 int buffered_size; 1322 #endif 1323 #ifdef CONFIG_FLASH_SHOW_PROGRESS 1324 int digit = CONFIG_FLASH_SHOW_PROGRESS; 1325 int scale = 0; 1326 int dots = 0; 1327 1328 /* 1329 * Suppress if there are fewer than CONFIG_FLASH_SHOW_PROGRESS writes. 1330 */ 1331 if (cnt >= CONFIG_FLASH_SHOW_PROGRESS) { 1332 scale = (int)((cnt + CONFIG_FLASH_SHOW_PROGRESS - 1) / 1333 CONFIG_FLASH_SHOW_PROGRESS); 1334 } 1335 #endif 1336 1337 /* get lower aligned address */ 1338 wp = (addr & ~(info->portwidth - 1)); 1339 1340 /* handle unaligned start */ 1341 if ((aln = addr - wp) != 0) { 1342 cword.l = 0; 1343 p = (uchar *)wp; 1344 for (i = 0; i < aln; ++i) 1345 flash_add_byte (info, &cword, flash_read8(p + i)); 1346 1347 for (; (i < info->portwidth) && (cnt > 0); i++) { 1348 flash_add_byte (info, &cword, *src++); 1349 cnt--; 1350 } 1351 for (; (cnt == 0) && (i < info->portwidth); ++i) 1352 flash_add_byte (info, &cword, flash_read8(p + i)); 1353 1354 rc = flash_write_cfiword (info, wp, cword); 1355 if (rc != 0) 1356 return rc; 1357 1358 wp += i; 1359 FLASH_SHOW_PROGRESS(scale, dots, digit, i); 1360 } 1361 1362 /* handle the aligned part */ 1363 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1364 buffered_size = (info->portwidth / info->chipwidth); 1365 buffered_size *= info->buffer_size; 1366 while (cnt >= info->portwidth) { 1367 /* prohibit buffer write when buffer_size is 1 */ 1368 if (info->buffer_size == 1) { 1369 cword.l = 0; 1370 for (i = 0; i < info->portwidth; i++) 1371 flash_add_byte (info, &cword, *src++); 1372 if ((rc = flash_write_cfiword (info, wp, cword)) != 0) 1373 return rc; 1374 wp += info->portwidth; 1375 cnt -= info->portwidth; 1376 continue; 1377 } 1378 1379 /* write buffer until next buffered_size aligned boundary */ 1380 i = buffered_size - (wp % buffered_size); 1381 if (i > cnt) 1382 i = cnt; 1383 if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK) 1384 return rc; 1385 i -= i & (info->portwidth - 1); 1386 wp += i; 1387 src += i; 1388 cnt -= i; 1389 FLASH_SHOW_PROGRESS(scale, dots, digit, i); 1390 /* Only check every once in a while */ 1391 if ((cnt & 0xFFFF) < buffered_size && ctrlc()) 1392 return ERR_ABORTED; 1393 } 1394 #else 1395 while (cnt >= info->portwidth) { 1396 cword.l = 0; 1397 for (i = 0; i < info->portwidth; i++) { 1398 flash_add_byte (info, &cword, *src++); 1399 } 1400 if ((rc = flash_write_cfiword (info, wp, cword)) != 0) 1401 return rc; 1402 wp += info->portwidth; 1403 cnt -= info->portwidth; 1404 FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth); 1405 /* Only check every once in a while */ 1406 if ((cnt & 0xFFFF) < info->portwidth && ctrlc()) 1407 return ERR_ABORTED; 1408 } 1409 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 1410 1411 if (cnt == 0) { 1412 return (0); 1413 } 1414 1415 /* 1416 * handle unaligned tail bytes 1417 */ 1418 cword.l = 0; 1419 p = (uchar *)wp; 1420 for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) { 1421 flash_add_byte (info, &cword, *src++); 1422 --cnt; 1423 } 1424 for (; i < info->portwidth; ++i) 1425 flash_add_byte (info, &cword, flash_read8(p + i)); 1426 1427 return flash_write_cfiword (info, wp, cword); 1428 } 1429 1430 static inline int manufact_match(flash_info_t *info, u32 manu) 1431 { 1432 return info->manufacturer_id == ((manu & FLASH_VENDMASK) >> 16); 1433 } 1434 1435 /*----------------------------------------------------------------------- 1436 */ 1437 #ifdef CONFIG_SYS_FLASH_PROTECTION 1438 1439 static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) 1440 { 1441 if (manufact_match(info, INTEL_MANUFACT) 1442 && info->device_id == NUMONYX_256MBIT) { 1443 /* 1444 * see errata called 1445 * "Numonyx Axcell P33/P30 Specification Update" :) 1446 */ 1447 flash_write_cmd(info, sector, 0, FLASH_CMD_READ_ID); 1448 if (!flash_isequal(info, sector, FLASH_OFFSET_PROTECT, 1449 prot)) { 1450 /* 1451 * cmd must come before FLASH_CMD_PROTECT + 20us 1452 * Disable interrupts which might cause a timeout here. 1453 */ 1454 int flag = disable_interrupts(); 1455 unsigned short cmd; 1456 1457 if (prot) 1458 cmd = FLASH_CMD_PROTECT_SET; 1459 else 1460 cmd = FLASH_CMD_PROTECT_CLEAR; 1461 flash_write_cmd(info, sector, 0, 1462 FLASH_CMD_PROTECT); 1463 flash_write_cmd(info, sector, 0, cmd); 1464 /* re-enable interrupts if necessary */ 1465 if (flag) 1466 enable_interrupts(); 1467 } 1468 return 1; 1469 } 1470 return 0; 1471 } 1472 1473 int flash_real_protect (flash_info_t * info, long sector, int prot) 1474 { 1475 int retcode = 0; 1476 1477 switch (info->vendor) { 1478 case CFI_CMDSET_INTEL_PROG_REGIONS: 1479 case CFI_CMDSET_INTEL_STANDARD: 1480 case CFI_CMDSET_INTEL_EXTENDED: 1481 if (!cfi_protect_bugfix(info, sector, prot)) { 1482 flash_write_cmd(info, sector, 0, 1483 FLASH_CMD_CLEAR_STATUS); 1484 flash_write_cmd(info, sector, 0, 1485 FLASH_CMD_PROTECT); 1486 if (prot) 1487 flash_write_cmd(info, sector, 0, 1488 FLASH_CMD_PROTECT_SET); 1489 else 1490 flash_write_cmd(info, sector, 0, 1491 FLASH_CMD_PROTECT_CLEAR); 1492 1493 } 1494 break; 1495 case CFI_CMDSET_AMD_EXTENDED: 1496 case CFI_CMDSET_AMD_STANDARD: 1497 /* U-Boot only checks the first byte */ 1498 if (manufact_match(info, ATM_MANUFACT)) { 1499 if (prot) { 1500 flash_unlock_seq (info, 0); 1501 flash_write_cmd (info, 0, 1502 info->addr_unlock1, 1503 ATM_CMD_SOFTLOCK_START); 1504 flash_unlock_seq (info, 0); 1505 flash_write_cmd (info, sector, 0, 1506 ATM_CMD_LOCK_SECT); 1507 } else { 1508 flash_write_cmd (info, 0, 1509 info->addr_unlock1, 1510 AMD_CMD_UNLOCK_START); 1511 if (info->device_id == ATM_ID_BV6416) 1512 flash_write_cmd (info, sector, 1513 0, ATM_CMD_UNLOCK_SECT); 1514 } 1515 } 1516 if (info->legacy_unlock) { 1517 int flag = disable_interrupts(); 1518 int lock_flag; 1519 1520 flash_unlock_seq(info, 0); 1521 flash_write_cmd(info, 0, info->addr_unlock1, 1522 AMD_CMD_SET_PPB_ENTRY); 1523 lock_flag = flash_isset(info, sector, 0, 0x01); 1524 if (prot) { 1525 if (lock_flag) { 1526 flash_write_cmd(info, sector, 0, 1527 AMD_CMD_PPB_LOCK_BC1); 1528 flash_write_cmd(info, sector, 0, 1529 AMD_CMD_PPB_LOCK_BC2); 1530 } 1531 debug("sector %ld %slocked\n", sector, 1532 lock_flag ? "" : "already "); 1533 } else { 1534 if (!lock_flag) { 1535 debug("unlock %ld\n", sector); 1536 flash_write_cmd(info, 0, 0, 1537 AMD_CMD_PPB_UNLOCK_BC1); 1538 flash_write_cmd(info, 0, 0, 1539 AMD_CMD_PPB_UNLOCK_BC2); 1540 } 1541 debug("sector %ld %sunlocked\n", sector, 1542 !lock_flag ? "" : "already "); 1543 } 1544 if (flag) 1545 enable_interrupts(); 1546 1547 if (flash_status_check(info, sector, 1548 info->erase_blk_tout, 1549 prot ? "protect" : "unprotect")) 1550 printf("status check error\n"); 1551 1552 flash_write_cmd(info, 0, 0, 1553 AMD_CMD_SET_PPB_EXIT_BC1); 1554 flash_write_cmd(info, 0, 0, 1555 AMD_CMD_SET_PPB_EXIT_BC2); 1556 } 1557 break; 1558 #ifdef CONFIG_FLASH_CFI_LEGACY 1559 case CFI_CMDSET_AMD_LEGACY: 1560 flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); 1561 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT); 1562 if (prot) 1563 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET); 1564 else 1565 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR); 1566 #endif 1567 }; 1568 1569 /* 1570 * Flash needs to be in status register read mode for 1571 * flash_full_status_check() to work correctly 1572 */ 1573 flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS); 1574 if ((retcode = 1575 flash_full_status_check (info, sector, info->erase_blk_tout, 1576 prot ? "protect" : "unprotect")) == 0) { 1577 1578 info->protect[sector] = prot; 1579 1580 /* 1581 * On some of Intel's flash chips (marked via legacy_unlock) 1582 * unprotect unprotects all locking. 1583 */ 1584 if ((prot == 0) && (info->legacy_unlock)) { 1585 flash_sect_t i; 1586 1587 for (i = 0; i < info->sector_count; i++) { 1588 if (info->protect[i]) 1589 flash_real_protect (info, i, 1); 1590 } 1591 } 1592 } 1593 return retcode; 1594 } 1595 1596 /*----------------------------------------------------------------------- 1597 * flash_read_user_serial - read the OneTimeProgramming cells 1598 */ 1599 void flash_read_user_serial (flash_info_t * info, void *buffer, int offset, 1600 int len) 1601 { 1602 uchar *src; 1603 uchar *dst; 1604 1605 dst = buffer; 1606 src = flash_map (info, 0, FLASH_OFFSET_USER_PROTECTION); 1607 flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); 1608 memcpy (dst, src + offset, len); 1609 flash_write_cmd (info, 0, 0, info->cmd_reset); 1610 udelay(1); 1611 flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src); 1612 } 1613 1614 /* 1615 * flash_read_factory_serial - read the device Id from the protection area 1616 */ 1617 void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset, 1618 int len) 1619 { 1620 uchar *src; 1621 1622 src = flash_map (info, 0, FLASH_OFFSET_INTEL_PROTECTION); 1623 flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); 1624 memcpy (buffer, src + offset, len); 1625 flash_write_cmd (info, 0, 0, info->cmd_reset); 1626 udelay(1); 1627 flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src); 1628 } 1629 1630 #endif /* CONFIG_SYS_FLASH_PROTECTION */ 1631 1632 /*----------------------------------------------------------------------- 1633 * Reverse the order of the erase regions in the CFI QRY structure. 1634 * This is needed for chips that are either a) correctly detected as 1635 * top-boot, or b) buggy. 1636 */ 1637 static void cfi_reverse_geometry(struct cfi_qry *qry) 1638 { 1639 unsigned int i, j; 1640 u32 tmp; 1641 1642 for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) { 1643 tmp = qry->erase_region_info[i]; 1644 qry->erase_region_info[i] = qry->erase_region_info[j]; 1645 qry->erase_region_info[j] = tmp; 1646 } 1647 } 1648 1649 /*----------------------------------------------------------------------- 1650 * read jedec ids from device and set corresponding fields in info struct 1651 * 1652 * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct 1653 * 1654 */ 1655 static void cmdset_intel_read_jedec_ids(flash_info_t *info) 1656 { 1657 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1658 udelay(1); 1659 flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); 1660 udelay(1000); /* some flash are slow to respond */ 1661 info->manufacturer_id = flash_read_uchar (info, 1662 FLASH_OFFSET_MANUFACTURER_ID); 1663 info->device_id = (info->chipwidth == FLASH_CFI_16BIT) ? 1664 flash_read_word (info, FLASH_OFFSET_DEVICE_ID) : 1665 flash_read_uchar (info, FLASH_OFFSET_DEVICE_ID); 1666 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1667 } 1668 1669 static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry) 1670 { 1671 info->cmd_reset = FLASH_CMD_RESET; 1672 1673 cmdset_intel_read_jedec_ids(info); 1674 flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); 1675 1676 #ifdef CONFIG_SYS_FLASH_PROTECTION 1677 /* read legacy lock/unlock bit from intel flash */ 1678 if (info->ext_addr) { 1679 info->legacy_unlock = flash_read_uchar (info, 1680 info->ext_addr + 5) & 0x08; 1681 } 1682 #endif 1683 1684 return 0; 1685 } 1686 1687 static void cmdset_amd_read_jedec_ids(flash_info_t *info) 1688 { 1689 ushort bankId = 0; 1690 uchar manuId; 1691 1692 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1693 flash_unlock_seq(info, 0); 1694 flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); 1695 udelay(1000); /* some flash are slow to respond */ 1696 1697 manuId = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); 1698 /* JEDEC JEP106Z specifies ID codes up to bank 7 */ 1699 while (manuId == FLASH_CONTINUATION_CODE && bankId < 0x800) { 1700 bankId += 0x100; 1701 manuId = flash_read_uchar (info, 1702 bankId | FLASH_OFFSET_MANUFACTURER_ID); 1703 } 1704 info->manufacturer_id = manuId; 1705 1706 switch (info->chipwidth){ 1707 case FLASH_CFI_8BIT: 1708 info->device_id = flash_read_uchar (info, 1709 FLASH_OFFSET_DEVICE_ID); 1710 if (info->device_id == 0x7E) { 1711 /* AMD 3-byte (expanded) device ids */ 1712 info->device_id2 = flash_read_uchar (info, 1713 FLASH_OFFSET_DEVICE_ID2); 1714 info->device_id2 <<= 8; 1715 info->device_id2 |= flash_read_uchar (info, 1716 FLASH_OFFSET_DEVICE_ID3); 1717 } 1718 break; 1719 case FLASH_CFI_16BIT: 1720 info->device_id = flash_read_word (info, 1721 FLASH_OFFSET_DEVICE_ID); 1722 if ((info->device_id & 0xff) == 0x7E) { 1723 /* AMD 3-byte (expanded) device ids */ 1724 info->device_id2 = flash_read_uchar (info, 1725 FLASH_OFFSET_DEVICE_ID2); 1726 info->device_id2 <<= 8; 1727 info->device_id2 |= flash_read_uchar (info, 1728 FLASH_OFFSET_DEVICE_ID3); 1729 } 1730 break; 1731 default: 1732 break; 1733 } 1734 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1735 udelay(1); 1736 } 1737 1738 static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) 1739 { 1740 info->cmd_reset = AMD_CMD_RESET; 1741 info->cmd_erase_sector = AMD_CMD_ERASE_SECTOR; 1742 1743 cmdset_amd_read_jedec_ids(info); 1744 flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); 1745 1746 #ifdef CONFIG_SYS_FLASH_PROTECTION 1747 if (info->ext_addr) { 1748 /* read sector protect/unprotect scheme (at 0x49) */ 1749 if (flash_read_uchar(info, info->ext_addr + 9) == 0x8) 1750 info->legacy_unlock = 1; 1751 } 1752 #endif 1753 1754 return 0; 1755 } 1756 1757 #ifdef CONFIG_FLASH_CFI_LEGACY 1758 static void flash_read_jedec_ids (flash_info_t * info) 1759 { 1760 info->manufacturer_id = 0; 1761 info->device_id = 0; 1762 info->device_id2 = 0; 1763 1764 switch (info->vendor) { 1765 case CFI_CMDSET_INTEL_PROG_REGIONS: 1766 case CFI_CMDSET_INTEL_STANDARD: 1767 case CFI_CMDSET_INTEL_EXTENDED: 1768 cmdset_intel_read_jedec_ids(info); 1769 break; 1770 case CFI_CMDSET_AMD_STANDARD: 1771 case CFI_CMDSET_AMD_EXTENDED: 1772 cmdset_amd_read_jedec_ids(info); 1773 break; 1774 default: 1775 break; 1776 } 1777 } 1778 1779 /*----------------------------------------------------------------------- 1780 * Call board code to request info about non-CFI flash. 1781 * board_flash_get_legacy needs to fill in at least: 1782 * info->portwidth, info->chipwidth and info->interface for Jedec probing. 1783 */ 1784 static int flash_detect_legacy(phys_addr_t base, int banknum) 1785 { 1786 flash_info_t *info = &flash_info[banknum]; 1787 1788 if (board_flash_get_legacy(base, banknum, info)) { 1789 /* board code may have filled info completely. If not, we 1790 use JEDEC ID probing. */ 1791 if (!info->vendor) { 1792 int modes[] = { 1793 CFI_CMDSET_AMD_STANDARD, 1794 CFI_CMDSET_INTEL_STANDARD 1795 }; 1796 int i; 1797 1798 for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) { 1799 info->vendor = modes[i]; 1800 info->start[0] = 1801 (ulong)map_physmem(base, 1802 info->portwidth, 1803 MAP_NOCACHE); 1804 if (info->portwidth == FLASH_CFI_8BIT 1805 && info->interface == FLASH_CFI_X8X16) { 1806 info->addr_unlock1 = 0x2AAA; 1807 info->addr_unlock2 = 0x5555; 1808 } else { 1809 info->addr_unlock1 = 0x5555; 1810 info->addr_unlock2 = 0x2AAA; 1811 } 1812 flash_read_jedec_ids(info); 1813 debug("JEDEC PROBE: ID %x %x %x\n", 1814 info->manufacturer_id, 1815 info->device_id, 1816 info->device_id2); 1817 if (jedec_flash_match(info, info->start[0])) 1818 break; 1819 else 1820 unmap_physmem((void *)info->start[0], 1821 MAP_NOCACHE); 1822 } 1823 } 1824 1825 switch(info->vendor) { 1826 case CFI_CMDSET_INTEL_PROG_REGIONS: 1827 case CFI_CMDSET_INTEL_STANDARD: 1828 case CFI_CMDSET_INTEL_EXTENDED: 1829 info->cmd_reset = FLASH_CMD_RESET; 1830 break; 1831 case CFI_CMDSET_AMD_STANDARD: 1832 case CFI_CMDSET_AMD_EXTENDED: 1833 case CFI_CMDSET_AMD_LEGACY: 1834 info->cmd_reset = AMD_CMD_RESET; 1835 break; 1836 } 1837 info->flash_id = FLASH_MAN_CFI; 1838 return 1; 1839 } 1840 return 0; /* use CFI */ 1841 } 1842 #else 1843 static inline int flash_detect_legacy(phys_addr_t base, int banknum) 1844 { 1845 return 0; /* use CFI */ 1846 } 1847 #endif 1848 1849 /*----------------------------------------------------------------------- 1850 * detect if flash is compatible with the Common Flash Interface (CFI) 1851 * http://www.jedec.org/download/search/jesd68.pdf 1852 */ 1853 static void flash_read_cfi (flash_info_t *info, void *buf, 1854 unsigned int start, size_t len) 1855 { 1856 u8 *p = buf; 1857 unsigned int i; 1858 1859 for (i = 0; i < len; i++) 1860 p[i] = flash_read_uchar(info, start + i); 1861 } 1862 1863 static void __flash_cmd_reset(flash_info_t *info) 1864 { 1865 /* 1866 * We do not yet know what kind of commandset to use, so we issue 1867 * the reset command in both Intel and AMD variants, in the hope 1868 * that AMD flash roms ignore the Intel command. 1869 */ 1870 flash_write_cmd(info, 0, 0, AMD_CMD_RESET); 1871 udelay(1); 1872 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 1873 } 1874 void flash_cmd_reset(flash_info_t *info) 1875 __attribute__((weak,alias("__flash_cmd_reset"))); 1876 1877 static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) 1878 { 1879 int cfi_offset; 1880 1881 /* Issue FLASH reset command */ 1882 flash_cmd_reset(info); 1883 1884 for (cfi_offset=0; 1885 cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint); 1886 cfi_offset++) { 1887 flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], 1888 FLASH_CMD_CFI); 1889 if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') 1890 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') 1891 && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { 1892 flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, 1893 sizeof(struct cfi_qry)); 1894 info->interface = le16_to_cpu(qry->interface_desc); 1895 1896 info->cfi_offset = flash_offset_cfi[cfi_offset]; 1897 debug ("device interface is %d\n", 1898 info->interface); 1899 debug ("found port %d chip %d ", 1900 info->portwidth, info->chipwidth); 1901 debug ("port %d bits chip %d bits\n", 1902 info->portwidth << CFI_FLASH_SHIFT_WIDTH, 1903 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 1904 1905 /* calculate command offsets as in the Linux driver */ 1906 info->addr_unlock1 = 0x555; 1907 info->addr_unlock2 = 0x2aa; 1908 1909 /* 1910 * modify the unlock address if we are 1911 * in compatibility mode 1912 */ 1913 if ( /* x8/x16 in x8 mode */ 1914 ((info->chipwidth == FLASH_CFI_BY8) && 1915 (info->interface == FLASH_CFI_X8X16)) || 1916 /* x16/x32 in x16 mode */ 1917 ((info->chipwidth == FLASH_CFI_BY16) && 1918 (info->interface == FLASH_CFI_X16X32))) 1919 { 1920 info->addr_unlock1 = 0xaaa; 1921 info->addr_unlock2 = 0x555; 1922 } 1923 1924 info->name = "CFI conformant"; 1925 return 1; 1926 } 1927 } 1928 1929 return 0; 1930 } 1931 1932 static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) 1933 { 1934 debug ("flash detect cfi\n"); 1935 1936 for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH; 1937 info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) { 1938 for (info->chipwidth = FLASH_CFI_BY8; 1939 info->chipwidth <= info->portwidth; 1940 info->chipwidth <<= 1) 1941 if (__flash_detect_cfi(info, qry)) 1942 return 1; 1943 } 1944 debug ("not found\n"); 1945 return 0; 1946 } 1947 1948 /* 1949 * Manufacturer-specific quirks. Add workarounds for geometry 1950 * reversal, etc. here. 1951 */ 1952 static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry) 1953 { 1954 /* check if flash geometry needs reversal */ 1955 if (qry->num_erase_regions > 1) { 1956 /* reverse geometry if top boot part */ 1957 if (info->cfi_version < 0x3131) { 1958 /* CFI < 1.1, try to guess from device id */ 1959 if ((info->device_id & 0x80) != 0) 1960 cfi_reverse_geometry(qry); 1961 } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { 1962 /* CFI >= 1.1, deduct from top/bottom flag */ 1963 /* note: ext_addr is valid since cfi_version > 0 */ 1964 cfi_reverse_geometry(qry); 1965 } 1966 } 1967 } 1968 1969 static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry) 1970 { 1971 int reverse_geometry = 0; 1972 1973 /* Check the "top boot" bit in the PRI */ 1974 if (info->ext_addr && !(flash_read_uchar(info, info->ext_addr + 6) & 1)) 1975 reverse_geometry = 1; 1976 1977 /* AT49BV6416(T) list the erase regions in the wrong order. 1978 * However, the device ID is identical with the non-broken 1979 * AT49BV642D they differ in the high byte. 1980 */ 1981 if (info->device_id == 0xd6 || info->device_id == 0xd2) 1982 reverse_geometry = !reverse_geometry; 1983 1984 if (reverse_geometry) 1985 cfi_reverse_geometry(qry); 1986 } 1987 1988 static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) 1989 { 1990 /* check if flash geometry needs reversal */ 1991 if (qry->num_erase_regions > 1) { 1992 /* reverse geometry if top boot part */ 1993 if (info->cfi_version < 0x3131) { 1994 /* CFI < 1.1, guess by device id */ 1995 if (info->device_id == 0x22CA || /* M29W320DT */ 1996 info->device_id == 0x2256 || /* M29W320ET */ 1997 info->device_id == 0x22D7) { /* M29W800DT */ 1998 cfi_reverse_geometry(qry); 1999 } 2000 } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { 2001 /* CFI >= 1.1, deduct from top/bottom flag */ 2002 /* note: ext_addr is valid since cfi_version > 0 */ 2003 cfi_reverse_geometry(qry); 2004 } 2005 } 2006 } 2007 2008 static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry) 2009 { 2010 /* 2011 * SST, for many recent nor parallel flashes, says they are 2012 * CFI-conformant. This is not true, since qry struct. 2013 * reports a std. AMD command set (0x0002), while SST allows to 2014 * erase two different sector sizes for the same memory. 2015 * 64KB sector (SST call it block) needs 0x30 to be erased. 2016 * 4KB sector (SST call it sector) needs 0x50 to be erased. 2017 * Since CFI query detect the 4KB number of sectors, users expects 2018 * a sector granularity of 4KB, and it is here set. 2019 */ 2020 if (info->device_id == 0x5D23 || /* SST39VF3201B */ 2021 info->device_id == 0x5C23) { /* SST39VF3202B */ 2022 /* set sector granularity to 4KB */ 2023 info->cmd_erase_sector=0x50; 2024 } 2025 } 2026 2027 static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry) 2028 { 2029 /* 2030 * The M29EW devices seem to report the CFI information wrong 2031 * when it's in 8 bit mode. 2032 * There's an app note from Numonyx on this issue. 2033 * So adjust the buffer size for M29EW while operating in 8-bit mode 2034 */ 2035 if (((qry->max_buf_write_size) > 0x8) && 2036 (info->device_id == 0x7E) && 2037 (info->device_id2 == 0x2201 || 2038 info->device_id2 == 0x2301 || 2039 info->device_id2 == 0x2801 || 2040 info->device_id2 == 0x4801)) { 2041 debug("Adjusted buffer size on Numonyx flash" 2042 " M29EW family in 8 bit mode\n"); 2043 qry->max_buf_write_size = 0x8; 2044 } 2045 } 2046 2047 /* 2048 * The following code cannot be run from FLASH! 2049 * 2050 */ 2051 ulong flash_get_size (phys_addr_t base, int banknum) 2052 { 2053 flash_info_t *info = &flash_info[banknum]; 2054 int i, j; 2055 flash_sect_t sect_cnt; 2056 phys_addr_t sector; 2057 unsigned long tmp; 2058 int size_ratio; 2059 uchar num_erase_regions; 2060 int erase_region_size; 2061 int erase_region_count; 2062 struct cfi_qry qry; 2063 unsigned long max_size; 2064 2065 memset(&qry, 0, sizeof(qry)); 2066 2067 info->ext_addr = 0; 2068 info->cfi_version = 0; 2069 #ifdef CONFIG_SYS_FLASH_PROTECTION 2070 info->legacy_unlock = 0; 2071 #endif 2072 2073 info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE); 2074 2075 if (flash_detect_cfi (info, &qry)) { 2076 info->vendor = le16_to_cpu(qry.p_id); 2077 info->ext_addr = le16_to_cpu(qry.p_adr); 2078 num_erase_regions = qry.num_erase_regions; 2079 2080 if (info->ext_addr) { 2081 info->cfi_version = (ushort) flash_read_uchar (info, 2082 info->ext_addr + 3) << 8; 2083 info->cfi_version |= (ushort) flash_read_uchar (info, 2084 info->ext_addr + 4); 2085 } 2086 2087 #ifdef DEBUG 2088 flash_printqry (&qry); 2089 #endif 2090 2091 switch (info->vendor) { 2092 case CFI_CMDSET_INTEL_PROG_REGIONS: 2093 case CFI_CMDSET_INTEL_STANDARD: 2094 case CFI_CMDSET_INTEL_EXTENDED: 2095 cmdset_intel_init(info, &qry); 2096 break; 2097 case CFI_CMDSET_AMD_STANDARD: 2098 case CFI_CMDSET_AMD_EXTENDED: 2099 cmdset_amd_init(info, &qry); 2100 break; 2101 default: 2102 printf("CFI: Unknown command set 0x%x\n", 2103 info->vendor); 2104 /* 2105 * Unfortunately, this means we don't know how 2106 * to get the chip back to Read mode. Might 2107 * as well try an Intel-style reset... 2108 */ 2109 flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); 2110 return 0; 2111 } 2112 2113 /* Do manufacturer-specific fixups */ 2114 switch (info->manufacturer_id) { 2115 case 0x0001: /* AMD */ 2116 case 0x0037: /* AMIC */ 2117 flash_fixup_amd(info, &qry); 2118 break; 2119 case 0x001f: 2120 flash_fixup_atmel(info, &qry); 2121 break; 2122 case 0x0020: 2123 flash_fixup_stm(info, &qry); 2124 break; 2125 case 0x00bf: /* SST */ 2126 flash_fixup_sst(info, &qry); 2127 break; 2128 case 0x0089: /* Numonyx */ 2129 flash_fixup_num(info, &qry); 2130 break; 2131 } 2132 2133 debug ("manufacturer is %d\n", info->vendor); 2134 debug ("manufacturer id is 0x%x\n", info->manufacturer_id); 2135 debug ("device id is 0x%x\n", info->device_id); 2136 debug ("device id2 is 0x%x\n", info->device_id2); 2137 debug ("cfi version is 0x%04x\n", info->cfi_version); 2138 2139 size_ratio = info->portwidth / info->chipwidth; 2140 /* if the chip is x8/x16 reduce the ratio by half */ 2141 if ((info->interface == FLASH_CFI_X8X16) 2142 && (info->chipwidth == FLASH_CFI_BY8)) { 2143 size_ratio >>= 1; 2144 } 2145 debug ("size_ratio %d port %d bits chip %d bits\n", 2146 size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, 2147 info->chipwidth << CFI_FLASH_SHIFT_WIDTH); 2148 info->size = 1 << qry.dev_size; 2149 /* multiply the size by the number of chips */ 2150 info->size *= size_ratio; 2151 max_size = cfi_flash_bank_size(banknum); 2152 if (max_size && (info->size > max_size)) { 2153 debug("[truncated from %ldMiB]", info->size >> 20); 2154 info->size = max_size; 2155 } 2156 debug ("found %d erase regions\n", num_erase_regions); 2157 sect_cnt = 0; 2158 sector = base; 2159 for (i = 0; i < num_erase_regions; i++) { 2160 if (i > NUM_ERASE_REGIONS) { 2161 printf ("%d erase regions found, only %d used\n", 2162 num_erase_regions, NUM_ERASE_REGIONS); 2163 break; 2164 } 2165 2166 tmp = le32_to_cpu(qry.erase_region_info[i]); 2167 debug("erase region %u: 0x%08lx\n", i, tmp); 2168 2169 erase_region_count = (tmp & 0xffff) + 1; 2170 tmp >>= 16; 2171 erase_region_size = 2172 (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128; 2173 debug ("erase_region_count = %d erase_region_size = %d\n", 2174 erase_region_count, erase_region_size); 2175 for (j = 0; j < erase_region_count; j++) { 2176 if (sector - base >= info->size) 2177 break; 2178 if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { 2179 printf("ERROR: too many flash sectors\n"); 2180 break; 2181 } 2182 info->start[sect_cnt] = 2183 (ulong)map_physmem(sector, 2184 info->portwidth, 2185 MAP_NOCACHE); 2186 sector += (erase_region_size * size_ratio); 2187 2188 /* 2189 * Only read protection status from 2190 * supported devices (intel...) 2191 */ 2192 switch (info->vendor) { 2193 case CFI_CMDSET_INTEL_PROG_REGIONS: 2194 case CFI_CMDSET_INTEL_EXTENDED: 2195 case CFI_CMDSET_INTEL_STANDARD: 2196 /* 2197 * Set flash to read-id mode. Otherwise 2198 * reading protected status is not 2199 * guaranteed. 2200 */ 2201 flash_write_cmd(info, sect_cnt, 0, 2202 FLASH_CMD_READ_ID); 2203 info->protect[sect_cnt] = 2204 flash_isset (info, sect_cnt, 2205 FLASH_OFFSET_PROTECT, 2206 FLASH_STATUS_PROTECT); 2207 break; 2208 case CFI_CMDSET_AMD_EXTENDED: 2209 case CFI_CMDSET_AMD_STANDARD: 2210 if (!info->legacy_unlock) { 2211 /* default: not protected */ 2212 info->protect[sect_cnt] = 0; 2213 break; 2214 } 2215 2216 /* Read protection (PPB) from sector */ 2217 flash_write_cmd(info, 0, 0, 2218 info->cmd_reset); 2219 flash_unlock_seq(info, 0); 2220 flash_write_cmd(info, 0, 2221 info->addr_unlock1, 2222 FLASH_CMD_READ_ID); 2223 info->protect[sect_cnt] = 2224 flash_isset( 2225 info, sect_cnt, 2226 FLASH_OFFSET_PROTECT, 2227 FLASH_STATUS_PROTECT); 2228 break; 2229 default: 2230 /* default: not protected */ 2231 info->protect[sect_cnt] = 0; 2232 } 2233 2234 sect_cnt++; 2235 } 2236 } 2237 2238 info->sector_count = sect_cnt; 2239 info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size); 2240 tmp = 1 << qry.block_erase_timeout_typ; 2241 info->erase_blk_tout = tmp * 2242 (1 << qry.block_erase_timeout_max); 2243 tmp = (1 << qry.buf_write_timeout_typ) * 2244 (1 << qry.buf_write_timeout_max); 2245 2246 /* round up when converting to ms */ 2247 info->buffer_write_tout = (tmp + 999) / 1000; 2248 tmp = (1 << qry.word_write_timeout_typ) * 2249 (1 << qry.word_write_timeout_max); 2250 /* round up when converting to ms */ 2251 info->write_tout = (tmp + 999) / 1000; 2252 info->flash_id = FLASH_MAN_CFI; 2253 if ((info->interface == FLASH_CFI_X8X16) && 2254 (info->chipwidth == FLASH_CFI_BY8)) { 2255 /* XXX - Need to test on x8/x16 in parallel. */ 2256 info->portwidth >>= 1; 2257 } 2258 2259 flash_write_cmd (info, 0, 0, info->cmd_reset); 2260 } 2261 2262 return (info->size); 2263 } 2264 2265 #ifdef CONFIG_FLASH_CFI_MTD 2266 void flash_set_verbose(uint v) 2267 { 2268 flash_verbose = v; 2269 } 2270 #endif 2271 2272 static void cfi_flash_set_config_reg(u32 base, u16 val) 2273 { 2274 #ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS 2275 /* 2276 * Only set this config register if really defined 2277 * to a valid value (0xffff is invalid) 2278 */ 2279 if (val == 0xffff) 2280 return; 2281 2282 /* 2283 * Set configuration register. Data is "encrypted" in the 16 lower 2284 * address bits. 2285 */ 2286 flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1))); 2287 flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1))); 2288 2289 /* 2290 * Finally issue reset-command to bring device back to 2291 * read-array mode 2292 */ 2293 flash_write16(FLASH_CMD_RESET, (void *)base); 2294 #endif 2295 } 2296 2297 /*----------------------------------------------------------------------- 2298 */ 2299 2300 void flash_protect_default(void) 2301 { 2302 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) 2303 int i; 2304 struct apl_s { 2305 ulong start; 2306 ulong size; 2307 } apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST; 2308 #endif 2309 2310 /* Monitor protection ON by default */ 2311 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ 2312 (!defined(CONFIG_MONITOR_IS_IN_RAM)) 2313 flash_protect(FLAG_PROTECT_SET, 2314 CONFIG_SYS_MONITOR_BASE, 2315 CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, 2316 flash_get_info(CONFIG_SYS_MONITOR_BASE)); 2317 #endif 2318 2319 /* Environment protection ON by default */ 2320 #ifdef CONFIG_ENV_IS_IN_FLASH 2321 flash_protect(FLAG_PROTECT_SET, 2322 CONFIG_ENV_ADDR, 2323 CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, 2324 flash_get_info(CONFIG_ENV_ADDR)); 2325 #endif 2326 2327 /* Redundant environment protection ON by default */ 2328 #ifdef CONFIG_ENV_ADDR_REDUND 2329 flash_protect(FLAG_PROTECT_SET, 2330 CONFIG_ENV_ADDR_REDUND, 2331 CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, 2332 flash_get_info(CONFIG_ENV_ADDR_REDUND)); 2333 #endif 2334 2335 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) 2336 for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) { 2337 debug("autoprotecting from %08lx to %08lx\n", 2338 apl[i].start, apl[i].start + apl[i].size - 1); 2339 flash_protect(FLAG_PROTECT_SET, 2340 apl[i].start, 2341 apl[i].start + apl[i].size - 1, 2342 flash_get_info(apl[i].start)); 2343 } 2344 #endif 2345 } 2346 2347 unsigned long flash_init (void) 2348 { 2349 unsigned long size = 0; 2350 int i; 2351 2352 #ifdef CONFIG_SYS_FLASH_PROTECTION 2353 /* read environment from EEPROM */ 2354 char s[64]; 2355 getenv_f("unlock", s, sizeof(s)); 2356 #endif 2357 2358 /* Init: no FLASHes known */ 2359 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { 2360 flash_info[i].flash_id = FLASH_UNKNOWN; 2361 2362 /* Optionally write flash configuration register */ 2363 cfi_flash_set_config_reg(cfi_flash_bank_addr(i), 2364 cfi_flash_config_reg(i)); 2365 2366 if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) 2367 flash_get_size(cfi_flash_bank_addr(i), i); 2368 size += flash_info[i].size; 2369 if (flash_info[i].flash_id == FLASH_UNKNOWN) { 2370 #ifndef CONFIG_SYS_FLASH_QUIET_TEST 2371 printf ("## Unknown flash on Bank %d " 2372 "- Size = 0x%08lx = %ld MB\n", 2373 i+1, flash_info[i].size, 2374 flash_info[i].size >> 20); 2375 #endif /* CONFIG_SYS_FLASH_QUIET_TEST */ 2376 } 2377 #ifdef CONFIG_SYS_FLASH_PROTECTION 2378 else if ((s != NULL) && (strcmp(s, "yes") == 0)) { 2379 /* 2380 * Only the U-Boot image and it's environment 2381 * is protected, all other sectors are 2382 * unprotected (unlocked) if flash hardware 2383 * protection is used (CONFIG_SYS_FLASH_PROTECTION) 2384 * and the environment variable "unlock" is 2385 * set to "yes". 2386 */ 2387 if (flash_info[i].legacy_unlock) { 2388 int k; 2389 2390 /* 2391 * Disable legacy_unlock temporarily, 2392 * since flash_real_protect would 2393 * relock all other sectors again 2394 * otherwise. 2395 */ 2396 flash_info[i].legacy_unlock = 0; 2397 2398 /* 2399 * Legacy unlocking (e.g. Intel J3) -> 2400 * unlock only one sector. This will 2401 * unlock all sectors. 2402 */ 2403 flash_real_protect (&flash_info[i], 0, 0); 2404 2405 flash_info[i].legacy_unlock = 1; 2406 2407 /* 2408 * Manually mark other sectors as 2409 * unlocked (unprotected) 2410 */ 2411 for (k = 1; k < flash_info[i].sector_count; k++) 2412 flash_info[i].protect[k] = 0; 2413 } else { 2414 /* 2415 * No legancy unlocking -> unlock all sectors 2416 */ 2417 flash_protect (FLAG_PROTECT_CLEAR, 2418 flash_info[i].start[0], 2419 flash_info[i].start[0] 2420 + flash_info[i].size - 1, 2421 &flash_info[i]); 2422 } 2423 } 2424 #endif /* CONFIG_SYS_FLASH_PROTECTION */ 2425 } 2426 2427 flash_protect_default(); 2428 #ifdef CONFIG_FLASH_CFI_MTD 2429 cfi_mtd_init(); 2430 #endif 2431 2432 return (size); 2433 } 2434