xref: /openbmc/u-boot/drivers/mtd/Kconfig (revision ad890cac)
1menu "MTD Support"
2
3config MTD_PARTITIONS
4	bool
5
6config MTD
7	bool "Enable Driver Model for MTD drivers"
8	depends on DM
9	help
10	  Enable driver model for Memory Technology Devices (MTD), such as
11	  flash, RAM and similar chips, often used for solid state file
12	  systems on embedded devices.
13
14config MTD_NOR_FLASH
15	bool "Enable parallel NOR flash support"
16	help
17	  Enable support for parallel NOR flash.
18
19config MTD_DEVICE
20	bool "Enable MTD Device for NAND and ONENAND devices"
21	help
22	  Adds the MTD device infrastructure from the Linux kernel.
23	  Needed for mtdparts command support.
24
25config FLASH_CFI_DRIVER
26	bool "Enable CFI Flash driver"
27	help
28	  The Common Flash Interface specification was developed by Intel,
29	  AMD and other flash manufactures. It provides a universal method
30	  for probing the capabilities of flash devices. If you wish to
31	  support any device that is CFI-compliant, you need to enable this
32	  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
33	  for more information on CFI.
34
35config CFI_FLASH
36	bool "Enable Driver Model for CFI Flash driver"
37	depends on MTD
38	help
39	  The Common Flash Interface specification was developed by Intel,
40	  AMD and other flash manufactures. It provides a universal method
41	  for probing the capabilities of flash devices. If you wish to
42	  support any device that is CFI-compliant, you need to enable this
43	  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
44	  for more information on CFI.
45
46config SYS_FLASH_USE_BUFFER_WRITE
47	bool "Enable buffered writes to flash"
48	depends on FLASH_CFI_DRIVER
49	help
50	  Use buffered writes to flash.
51
52config FLASH_CFI_MTD
53	bool "Enable CFI MTD driver"
54	depends on FLASH_CFI_DRIVER
55	help
56	  This option enables the building of the cfi_mtd driver
57	  in the drivers directory. The driver exports CFI flash
58	  to the MTD layer.
59
60config SYS_FLASH_PROTECTION
61	bool "Use hardware flash protection"
62	depends on FLASH_CFI_DRIVER
63	help
64	  If defined, hardware flash sectors protection is used
65	  instead of U-Boot software protection.
66
67config SYS_FLASH_CFI
68	bool "Define extra elements in CFI for flash geometry"
69	depends on FLASH_CFI_DRIVER
70	help
71	  Define if the flash driver uses extra elements in the
72	  common flash structure for storing flash geometry.
73
74config ALTERA_QSPI
75	bool "Altera Generic Quad SPI Controller"
76	depends on MTD
77	help
78	  This enables access to Altera EPCQ/EPCS flash chips using the
79	  Altera Generic Quad SPI Controller. The controller converts SPI
80	  NOR flash to parallel flash interface. Please find details on the
81	  "Embedded Peripherals IP User Guide" of Altera.
82
83config FLASH_PIC32
84	bool "Microchip PIC32 Flash driver"
85	depends on MACH_PIC32 && MTD
86	help
87	  This enables access to Microchip PIC32 internal non-CFI flash
88	  chips through PIC32 Non-Volatile-Memory Controller.
89
90config RENESAS_RPC_HF
91	bool "Renesas RCar Gen3 RPC Hyperflash driver"
92	depends on RCAR_GEN3 && MTD
93	help
94	  This enables access to Hyperflash memory through the Renesas
95	  RCar Gen3 RPC controller.
96
97source "drivers/mtd/nand/Kconfig"
98
99source "drivers/mtd/spi/Kconfig"
100
101source "drivers/mtd/ubi/Kconfig"
102
103endmenu
104