xref: /openbmc/u-boot/drivers/mmc/zynq_sdhci.c (revision 87a62bce)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2013 - 2015 Xilinx, Inc.
4  *
5  * Xilinx Zynq SD Host Controller Interface
6  */
7 
8 #include <clk.h>
9 #include <common.h>
10 #include <dm.h>
11 #include <fdtdec.h>
12 #include "mmc_private.h"
13 #include <linux/libfdt.h>
14 #include <malloc.h>
15 #include <sdhci.h>
16 #include <zynqmp_tap_delay.h>
17 
18 DECLARE_GLOBAL_DATA_PTR;
19 
20 struct arasan_sdhci_plat {
21 	struct mmc_config cfg;
22 	struct mmc mmc;
23 	unsigned int f_max;
24 };
25 
26 struct arasan_sdhci_priv {
27 	struct sdhci_host *host;
28 	u8 deviceid;
29 	u8 bank;
30 	u8 no_1p8;
31 	bool pwrseq;
32 };
33 
34 #if defined(CONFIG_ARCH_ZYNQMP)
35 #define MMC_HS200_BUS_SPEED	5
36 
37 static const u8 mode2timing[] = {
38 	[MMC_LEGACY] = UHS_SDR12_BUS_SPEED,
39 	[SD_LEGACY] = UHS_SDR12_BUS_SPEED,
40 	[MMC_HS] = HIGH_SPEED_BUS_SPEED,
41 	[SD_HS] = HIGH_SPEED_BUS_SPEED,
42 	[MMC_HS_52] = HIGH_SPEED_BUS_SPEED,
43 	[MMC_DDR_52] = HIGH_SPEED_BUS_SPEED,
44 	[UHS_SDR12] = UHS_SDR12_BUS_SPEED,
45 	[UHS_SDR25] = UHS_SDR25_BUS_SPEED,
46 	[UHS_SDR50] = UHS_SDR50_BUS_SPEED,
47 	[UHS_DDR50] = UHS_DDR50_BUS_SPEED,
48 	[UHS_SDR104] = UHS_SDR104_BUS_SPEED,
49 	[MMC_HS_200] = MMC_HS200_BUS_SPEED,
50 };
51 
52 #define SDHCI_HOST_CTRL2	0x3E
53 #define SDHCI_CTRL2_MODE_MASK	0x7
54 #define SDHCI_18V_SIGNAL	0x8
55 #define SDHCI_CTRL_EXEC_TUNING	0x0040
56 #define SDHCI_CTRL_TUNED_CLK	0x80
57 #define SDHCI_TUNING_LOOP_COUNT	40
58 
59 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
60 {
61 	u16 clk;
62 	unsigned long timeout;
63 
64 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
65 	clk &= ~(SDHCI_CLOCK_CARD_EN);
66 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
67 
68 	/* Issue DLL Reset */
69 	zynqmp_dll_reset(deviceid);
70 
71 	/* Wait max 20 ms */
72 	timeout = 100;
73 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
74 				& SDHCI_CLOCK_INT_STABLE)) {
75 		if (timeout == 0) {
76 			dev_err(mmc_dev(host->mmc),
77 				": Internal clock never stabilised.\n");
78 			return;
79 		}
80 		timeout--;
81 		udelay(1000);
82 	}
83 
84 	clk |= SDHCI_CLOCK_CARD_EN;
85 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
86 }
87 
88 static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
89 {
90 	struct mmc_cmd cmd;
91 	struct mmc_data data;
92 	u32 ctrl;
93 	struct sdhci_host *host;
94 	struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
95 	u8 tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
96 	u8 deviceid;
97 
98 	debug("%s\n", __func__);
99 
100 	host = priv->host;
101 	deviceid = priv->deviceid;
102 
103 	ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
104 	ctrl |= SDHCI_CTRL_EXEC_TUNING;
105 	sdhci_writew(host, ctrl, SDHCI_HOST_CTRL2);
106 
107 	mdelay(1);
108 
109 	arasan_zynqmp_dll_reset(host, deviceid);
110 
111 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
112 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
113 
114 	do {
115 		cmd.cmdidx = opcode;
116 		cmd.resp_type = MMC_RSP_R1;
117 		cmd.cmdarg = 0;
118 
119 		data.blocksize = 64;
120 		data.blocks = 1;
121 		data.flags = MMC_DATA_READ;
122 
123 		if (tuning_loop_counter-- == 0)
124 			break;
125 
126 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
127 		    mmc->bus_width == 8)
128 			data.blocksize = 128;
129 
130 		sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
131 						    data.blocksize),
132 			     SDHCI_BLOCK_SIZE);
133 		sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
134 		sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
135 
136 		mmc_send_cmd(mmc, &cmd, NULL);
137 		ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
138 
139 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
140 			udelay(1);
141 
142 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
143 
144 	if (tuning_loop_counter < 0) {
145 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
146 		sdhci_writel(host, ctrl, SDHCI_HOST_CTRL2);
147 	}
148 
149 	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
150 		printf("%s:Tuning failed\n", __func__);
151 		return -1;
152 	}
153 
154 	udelay(1);
155 	arasan_zynqmp_dll_reset(host, deviceid);
156 
157 	/* Enable only interrupts served by the SD controller */
158 	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
159 		     SDHCI_INT_ENABLE);
160 	/* Mask all sdhci interrupt sources */
161 	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
162 
163 	return 0;
164 }
165 
166 static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
167 {
168 	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
169 	struct mmc *mmc = (struct mmc *)host->mmc;
170 	u8 uhsmode;
171 
172 	uhsmode = mode2timing[mmc->selected_mode];
173 
174 	if (uhsmode >= UHS_SDR25_BUS_SPEED)
175 		arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
176 					   priv->bank);
177 }
178 
179 static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
180 {
181 	struct mmc *mmc = (struct mmc *)host->mmc;
182 	u32 reg;
183 
184 	if (!IS_SD(mmc))
185 		return;
186 
187 	if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
188 		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
189 		reg |= SDHCI_18V_SIGNAL;
190 		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
191 	}
192 
193 	if (mmc->selected_mode > SD_HS &&
194 	    mmc->selected_mode <= UHS_DDR50) {
195 		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
196 		reg &= ~SDHCI_CTRL2_MODE_MASK;
197 		switch (mmc->selected_mode) {
198 		case UHS_SDR12:
199 			reg |= UHS_SDR12_BUS_SPEED;
200 			break;
201 		case UHS_SDR25:
202 			reg |= UHS_SDR25_BUS_SPEED;
203 			break;
204 		case UHS_SDR50:
205 			reg |= UHS_SDR50_BUS_SPEED;
206 			break;
207 		case UHS_SDR104:
208 			reg |= UHS_SDR104_BUS_SPEED;
209 			break;
210 		case UHS_DDR50:
211 			reg |= UHS_DDR50_BUS_SPEED;
212 			break;
213 		default:
214 			break;
215 		}
216 		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
217 	}
218 }
219 #endif
220 
221 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
222 const struct sdhci_ops arasan_ops = {
223 	.platform_execute_tuning	= &arasan_sdhci_execute_tuning,
224 	.set_delay = &arasan_sdhci_set_tapdelay,
225 	.set_control_reg = &arasan_sdhci_set_control_reg,
226 };
227 #endif
228 
229 static int arasan_sdhci_probe(struct udevice *dev)
230 {
231 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
232 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
233 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
234 	struct sdhci_host *host;
235 	struct clk clk;
236 	unsigned long clock;
237 	int ret;
238 
239 	host = priv->host;
240 
241 	ret = clk_get_by_index(dev, 0, &clk);
242 	if (ret < 0) {
243 		dev_err(dev, "failed to get clock\n");
244 		return ret;
245 	}
246 
247 	clock = clk_get_rate(&clk);
248 	if (IS_ERR_VALUE(clock)) {
249 		dev_err(dev, "failed to get rate\n");
250 		return clock;
251 	}
252 
253 	debug("%s: CLK %ld\n", __func__, clock);
254 
255 	ret = clk_enable(&clk);
256 	if (ret && ret != -ENOSYS) {
257 		dev_err(dev, "failed to enable clock\n");
258 		return ret;
259 	}
260 
261 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
262 		       SDHCI_QUIRK_BROKEN_R1B;
263 
264 #ifdef CONFIG_ZYNQ_HISPD_BROKEN
265 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
266 #endif
267 
268 	if (priv->no_1p8)
269 		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
270 
271 	host->max_clk = clock;
272 
273 	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
274 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
275 	host->mmc = &plat->mmc;
276 	if (ret)
277 		return ret;
278 	host->mmc->priv = host;
279 	host->mmc->dev = dev;
280 	upriv->mmc = host->mmc;
281 
282 	return sdhci_probe(dev);
283 }
284 
285 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
286 {
287 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
288 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
289 
290 	priv->host = calloc(1, sizeof(struct sdhci_host));
291 	if (!priv->host)
292 		return -1;
293 
294 	priv->host->name = dev->name;
295 
296 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
297 	priv->host->ops = &arasan_ops;
298 #endif
299 
300 	priv->host->ioaddr = (void *)dev_read_addr(dev);
301 	if (IS_ERR(priv->host->ioaddr))
302 		return PTR_ERR(priv->host->ioaddr);
303 
304 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
305 	priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
306 	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
307 
308 	plat->f_max = dev_read_u32_default(dev, "max-frequency",
309 					   CONFIG_ZYNQ_SDHCI_MAX_FREQ);
310 	return 0;
311 }
312 
313 static int arasan_sdhci_bind(struct udevice *dev)
314 {
315 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
316 
317 	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
318 }
319 
320 static const struct udevice_id arasan_sdhci_ids[] = {
321 	{ .compatible = "arasan,sdhci-8.9a" },
322 	{ }
323 };
324 
325 U_BOOT_DRIVER(arasan_sdhci_drv) = {
326 	.name		= "arasan_sdhci",
327 	.id		= UCLASS_MMC,
328 	.of_match	= arasan_sdhci_ids,
329 	.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
330 	.ops		= &sdhci_ops,
331 	.bind		= arasan_sdhci_bind,
332 	.probe		= arasan_sdhci_probe,
333 	.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
334 	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
335 };
336