xref: /openbmc/u-boot/drivers/mmc/zynq_sdhci.c (revision 57efeb04)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2013 - 2015 Xilinx, Inc.
4  *
5  * Xilinx Zynq SD Host Controller Interface
6  */
7 
8 #include <clk.h>
9 #include <common.h>
10 #include <dm.h>
11 #include <fdtdec.h>
12 #include "mmc_private.h"
13 #include <linux/libfdt.h>
14 #include <malloc.h>
15 #include <sdhci.h>
16 #include <zynqmp_tap_delay.h>
17 
18 DECLARE_GLOBAL_DATA_PTR;
19 
20 struct arasan_sdhci_plat {
21 	struct mmc_config cfg;
22 	struct mmc mmc;
23 	unsigned int f_max;
24 };
25 
26 struct arasan_sdhci_priv {
27 	struct sdhci_host *host;
28 	u8 deviceid;
29 	u8 bank;
30 	u8 no_1p8;
31 };
32 
33 #if defined(CONFIG_ARCH_ZYNQMP)
34 #define MMC_HS200_BUS_SPEED	5
35 
36 static const u8 mode2timing[] = {
37 	[MMC_LEGACY] = UHS_SDR12_BUS_SPEED,
38 	[SD_LEGACY] = UHS_SDR12_BUS_SPEED,
39 	[MMC_HS] = HIGH_SPEED_BUS_SPEED,
40 	[SD_HS] = HIGH_SPEED_BUS_SPEED,
41 	[MMC_HS_52] = HIGH_SPEED_BUS_SPEED,
42 	[MMC_DDR_52] = HIGH_SPEED_BUS_SPEED,
43 	[UHS_SDR12] = UHS_SDR12_BUS_SPEED,
44 	[UHS_SDR25] = UHS_SDR25_BUS_SPEED,
45 	[UHS_SDR50] = UHS_SDR50_BUS_SPEED,
46 	[UHS_DDR50] = UHS_DDR50_BUS_SPEED,
47 	[UHS_SDR104] = UHS_SDR104_BUS_SPEED,
48 	[MMC_HS_200] = MMC_HS200_BUS_SPEED,
49 };
50 
51 #define SDHCI_HOST_CTRL2	0x3E
52 #define SDHCI_CTRL2_MODE_MASK	0x7
53 #define SDHCI_18V_SIGNAL	0x8
54 #define SDHCI_CTRL_EXEC_TUNING	0x0040
55 #define SDHCI_CTRL_TUNED_CLK	0x80
56 #define SDHCI_TUNING_LOOP_COUNT	40
57 
58 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
59 {
60 	u16 clk;
61 	unsigned long timeout;
62 
63 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
64 	clk &= ~(SDHCI_CLOCK_CARD_EN);
65 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
66 
67 	/* Issue DLL Reset */
68 	zynqmp_dll_reset(deviceid);
69 
70 	/* Wait max 20 ms */
71 	timeout = 100;
72 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
73 				& SDHCI_CLOCK_INT_STABLE)) {
74 		if (timeout == 0) {
75 			dev_err(mmc_dev(host->mmc),
76 				": Internal clock never stabilised.\n");
77 			return;
78 		}
79 		timeout--;
80 		udelay(1000);
81 	}
82 
83 	clk |= SDHCI_CLOCK_CARD_EN;
84 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
85 }
86 
87 static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
88 {
89 	struct mmc_cmd cmd;
90 	struct mmc_data data;
91 	u32 ctrl;
92 	struct sdhci_host *host;
93 	struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
94 	char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
95 	u8 deviceid;
96 
97 	debug("%s\n", __func__);
98 
99 	host = priv->host;
100 	deviceid = priv->deviceid;
101 
102 	ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
103 	ctrl |= SDHCI_CTRL_EXEC_TUNING;
104 	sdhci_writew(host, ctrl, SDHCI_HOST_CTRL2);
105 
106 	mdelay(1);
107 
108 	arasan_zynqmp_dll_reset(host, deviceid);
109 
110 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
111 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
112 
113 	do {
114 		cmd.cmdidx = opcode;
115 		cmd.resp_type = MMC_RSP_R1;
116 		cmd.cmdarg = 0;
117 
118 		data.blocksize = 64;
119 		data.blocks = 1;
120 		data.flags = MMC_DATA_READ;
121 
122 		if (tuning_loop_counter-- == 0)
123 			break;
124 
125 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
126 		    mmc->bus_width == 8)
127 			data.blocksize = 128;
128 
129 		sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
130 						    data.blocksize),
131 			     SDHCI_BLOCK_SIZE);
132 		sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
133 		sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
134 
135 		mmc_send_cmd(mmc, &cmd, NULL);
136 		ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
137 
138 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
139 			udelay(1);
140 
141 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
142 
143 	if (tuning_loop_counter < 0) {
144 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
145 		sdhci_writel(host, ctrl, SDHCI_HOST_CTRL2);
146 	}
147 
148 	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
149 		printf("%s:Tuning failed\n", __func__);
150 		return -1;
151 	}
152 
153 	udelay(1);
154 	arasan_zynqmp_dll_reset(host, deviceid);
155 
156 	/* Enable only interrupts served by the SD controller */
157 	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
158 		     SDHCI_INT_ENABLE);
159 	/* Mask all sdhci interrupt sources */
160 	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
161 
162 	return 0;
163 }
164 
165 static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
166 {
167 	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
168 	struct mmc *mmc = (struct mmc *)host->mmc;
169 	u8 uhsmode;
170 
171 	uhsmode = mode2timing[mmc->selected_mode];
172 
173 	if (uhsmode >= UHS_SDR25_BUS_SPEED)
174 		arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
175 					   priv->bank);
176 }
177 
178 static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
179 {
180 	struct mmc *mmc = (struct mmc *)host->mmc;
181 	u32 reg;
182 
183 	if (!IS_SD(mmc))
184 		return;
185 
186 	if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
187 		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
188 		reg |= SDHCI_18V_SIGNAL;
189 		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
190 	}
191 
192 	if (mmc->selected_mode > SD_HS &&
193 	    mmc->selected_mode <= UHS_DDR50) {
194 		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
195 		reg &= ~SDHCI_CTRL2_MODE_MASK;
196 		switch (mmc->selected_mode) {
197 		case UHS_SDR12:
198 			reg |= UHS_SDR12_BUS_SPEED;
199 			break;
200 		case UHS_SDR25:
201 			reg |= UHS_SDR25_BUS_SPEED;
202 			break;
203 		case UHS_SDR50:
204 			reg |= UHS_SDR50_BUS_SPEED;
205 			break;
206 		case UHS_SDR104:
207 			reg |= UHS_SDR104_BUS_SPEED;
208 			break;
209 		case UHS_DDR50:
210 			reg |= UHS_DDR50_BUS_SPEED;
211 			break;
212 		default:
213 			break;
214 		}
215 		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
216 	}
217 }
218 #endif
219 
220 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
221 const struct sdhci_ops arasan_ops = {
222 	.platform_execute_tuning	= &arasan_sdhci_execute_tuning,
223 	.set_delay = &arasan_sdhci_set_tapdelay,
224 	.set_control_reg = &arasan_sdhci_set_control_reg,
225 };
226 #endif
227 
228 static int arasan_sdhci_probe(struct udevice *dev)
229 {
230 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
231 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
232 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
233 	struct sdhci_host *host;
234 	struct clk clk;
235 	unsigned long clock;
236 	int ret;
237 
238 	host = priv->host;
239 
240 	ret = clk_get_by_index(dev, 0, &clk);
241 	if (ret < 0) {
242 		dev_err(dev, "failed to get clock\n");
243 		return ret;
244 	}
245 
246 	clock = clk_get_rate(&clk);
247 	if (IS_ERR_VALUE(clock)) {
248 		dev_err(dev, "failed to get rate\n");
249 		return clock;
250 	}
251 
252 	debug("%s: CLK %ld\n", __func__, clock);
253 
254 	ret = clk_enable(&clk);
255 	if (ret && ret != -ENOSYS) {
256 		dev_err(dev, "failed to enable clock\n");
257 		return ret;
258 	}
259 
260 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
261 		       SDHCI_QUIRK_BROKEN_R1B;
262 
263 #ifdef CONFIG_ZYNQ_HISPD_BROKEN
264 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
265 #endif
266 
267 	if (priv->no_1p8)
268 		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
269 
270 	host->max_clk = clock;
271 
272 	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
273 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
274 	host->mmc = &plat->mmc;
275 	if (ret)
276 		return ret;
277 	host->mmc->priv = host;
278 	host->mmc->dev = dev;
279 	upriv->mmc = host->mmc;
280 
281 	return sdhci_probe(dev);
282 }
283 
284 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
285 {
286 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
287 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
288 
289 	priv->host = calloc(1, sizeof(struct sdhci_host));
290 	if (!priv->host)
291 		return -1;
292 
293 	priv->host->name = dev->name;
294 
295 #if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
296 	priv->host->ops = &arasan_ops;
297 #endif
298 
299 	priv->host->ioaddr = (void *)dev_read_addr(dev);
300 	if (IS_ERR(priv->host->ioaddr))
301 		return PTR_ERR(priv->host->ioaddr);
302 
303 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
304 	priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
305 	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
306 
307 	plat->f_max = dev_read_u32_default(dev, "max-frequency",
308 					   CONFIG_ZYNQ_SDHCI_MAX_FREQ);
309 	return 0;
310 }
311 
312 static int arasan_sdhci_bind(struct udevice *dev)
313 {
314 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
315 
316 	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
317 }
318 
319 static const struct udevice_id arasan_sdhci_ids[] = {
320 	{ .compatible = "arasan,sdhci-8.9a" },
321 	{ }
322 };
323 
324 U_BOOT_DRIVER(arasan_sdhci_drv) = {
325 	.name		= "arasan_sdhci",
326 	.id		= UCLASS_MMC,
327 	.of_match	= arasan_sdhci_ids,
328 	.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
329 	.ops		= &sdhci_ops,
330 	.bind		= arasan_sdhci_bind,
331 	.probe		= arasan_sdhci_probe,
332 	.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
333 	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
334 };
335