1 /* 2 * Copyright (C) 2016 Socionext Inc. 3 * Author: Masahiro Yamada <yamada.masahiro@socionext.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <clk.h> 10 #include <fdtdec.h> 11 #include <mmc.h> 12 #include <dm/device.h> 13 #include <linux/compat.h> 14 #include <linux/io.h> 15 #include <linux/sizes.h> 16 #include <asm/unaligned.h> 17 #include <asm/dma-mapping.h> 18 19 DECLARE_GLOBAL_DATA_PTR; 20 21 #define UNIPHIER_SD_CMD 0x000 /* command */ 22 #define UNIPHIER_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */ 23 #define UNIPHIER_SD_CMD_MULTI BIT(13) /* multiple block transfer */ 24 #define UNIPHIER_SD_CMD_RD BIT(12) /* 1: read, 0: write */ 25 #define UNIPHIER_SD_CMD_DATA BIT(11) /* data transfer */ 26 #define UNIPHIER_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */ 27 #define UNIPHIER_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */ 28 #define UNIPHIER_SD_CMD_RSP_NONE (3 << 8)/* response: none */ 29 #define UNIPHIER_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */ 30 #define UNIPHIER_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */ 31 #define UNIPHIER_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */ 32 #define UNIPHIER_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */ 33 #define UNIPHIER_SD_ARG 0x008 /* command argument */ 34 #define UNIPHIER_SD_STOP 0x010 /* stop action control */ 35 #define UNIPHIER_SD_STOP_SEC BIT(8) /* use sector count */ 36 #define UNIPHIER_SD_STOP_STP BIT(0) /* issue CMD12 */ 37 #define UNIPHIER_SD_SECCNT 0x014 /* sector counter */ 38 #define UNIPHIER_SD_RSP10 0x018 /* response[39:8] */ 39 #define UNIPHIER_SD_RSP32 0x020 /* response[71:40] */ 40 #define UNIPHIER_SD_RSP54 0x028 /* response[103:72] */ 41 #define UNIPHIER_SD_RSP76 0x030 /* response[127:104] */ 42 #define UNIPHIER_SD_INFO1 0x038 /* IRQ status 1 */ 43 #define UNIPHIER_SD_INFO1_CD BIT(5) /* state of card detect */ 44 #define UNIPHIER_SD_INFO1_INSERT BIT(4) /* card inserted */ 45 #define UNIPHIER_SD_INFO1_REMOVE BIT(3) /* card removed */ 46 #define UNIPHIER_SD_INFO1_CMP BIT(2) /* data complete */ 47 #define UNIPHIER_SD_INFO1_RSP BIT(0) /* response complete */ 48 #define UNIPHIER_SD_INFO2 0x03c /* IRQ status 2 */ 49 #define UNIPHIER_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */ 50 #define UNIPHIER_SD_INFO2_CBSY BIT(14) /* command busy */ 51 #define UNIPHIER_SD_INFO2_BWE BIT(9) /* write buffer ready */ 52 #define UNIPHIER_SD_INFO2_BRE BIT(8) /* read buffer ready */ 53 #define UNIPHIER_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */ 54 #define UNIPHIER_SD_INFO2_ERR_RTO BIT(6) /* response time out */ 55 #define UNIPHIER_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */ 56 #define UNIPHIER_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */ 57 #define UNIPHIER_SD_INFO2_ERR_TO BIT(3) /* time out error */ 58 #define UNIPHIER_SD_INFO2_ERR_END BIT(2) /* END bit error */ 59 #define UNIPHIER_SD_INFO2_ERR_CRC BIT(1) /* CRC error */ 60 #define UNIPHIER_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */ 61 #define UNIPHIER_SD_INFO1_MASK 0x040 62 #define UNIPHIER_SD_INFO2_MASK 0x044 63 #define UNIPHIER_SD_CLKCTL 0x048 /* clock divisor */ 64 #define UNIPHIER_SD_CLKCTL_DIV_MASK 0x104ff 65 #define UNIPHIER_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */ 66 #define UNIPHIER_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */ 67 #define UNIPHIER_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */ 68 #define UNIPHIER_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */ 69 #define UNIPHIER_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */ 70 #define UNIPHIER_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */ 71 #define UNIPHIER_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */ 72 #define UNIPHIER_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */ 73 #define UNIPHIER_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */ 74 #define UNIPHIER_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */ 75 #define UNIPHIER_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */ 76 #define UNIPHIER_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */ 77 #define UNIPHIER_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */ 78 #define UNIPHIER_SD_SIZE 0x04c /* block size */ 79 #define UNIPHIER_SD_OPTION 0x050 80 #define UNIPHIER_SD_OPTION_WIDTH_MASK (5 << 13) 81 #define UNIPHIER_SD_OPTION_WIDTH_1 (4 << 13) 82 #define UNIPHIER_SD_OPTION_WIDTH_4 (0 << 13) 83 #define UNIPHIER_SD_OPTION_WIDTH_8 (1 << 13) 84 #define UNIPHIER_SD_BUF 0x060 /* read/write buffer */ 85 #define UNIPHIER_SD_EXTMODE 0x1b0 86 #define UNIPHIER_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */ 87 #define UNIPHIER_SD_SOFT_RST 0x1c0 88 #define UNIPHIER_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */ 89 #define UNIPHIER_SD_VERSION 0x1c4 /* version register */ 90 #define UNIPHIER_SD_VERSION_IP 0xff /* IP version */ 91 #define UNIPHIER_SD_HOST_MODE 0x1c8 92 #define UNIPHIER_SD_IF_MODE 0x1cc 93 #define UNIPHIER_SD_IF_MODE_DDR BIT(0) /* DDR mode */ 94 #define UNIPHIER_SD_VOLT 0x1e4 /* voltage switch */ 95 #define UNIPHIER_SD_VOLT_MASK (3 << 0) 96 #define UNIPHIER_SD_VOLT_OFF (0 << 0) 97 #define UNIPHIER_SD_VOLT_330 (1 << 0)/* 3.3V signal */ 98 #define UNIPHIER_SD_VOLT_180 (2 << 0)/* 1.8V signal */ 99 #define UNIPHIER_SD_DMA_MODE 0x410 100 #define UNIPHIER_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */ 101 #define UNIPHIER_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */ 102 #define UNIPHIER_SD_DMA_CTL 0x414 103 #define UNIPHIER_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */ 104 #define UNIPHIER_SD_DMA_RST 0x418 105 #define UNIPHIER_SD_DMA_RST_RD BIT(9) 106 #define UNIPHIER_SD_DMA_RST_WR BIT(8) 107 #define UNIPHIER_SD_DMA_INFO1 0x420 108 #define UNIPHIER_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete*/ 109 #define UNIPHIER_SD_DMA_INFO1_END_RD BIT(17) /* Don't use! Hardware bug */ 110 #define UNIPHIER_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */ 111 #define UNIPHIER_SD_DMA_INFO1_MASK 0x424 112 #define UNIPHIER_SD_DMA_INFO2 0x428 113 #define UNIPHIER_SD_DMA_INFO2_ERR_RD BIT(17) 114 #define UNIPHIER_SD_DMA_INFO2_ERR_WR BIT(16) 115 #define UNIPHIER_SD_DMA_INFO2_MASK 0x42c 116 #define UNIPHIER_SD_DMA_ADDR_L 0x440 117 #define UNIPHIER_SD_DMA_ADDR_H 0x444 118 119 /* alignment required by the DMA engine of this controller */ 120 #define UNIPHIER_SD_DMA_MINALIGN 0x10 121 122 struct uniphier_sd_priv { 123 struct mmc_config cfg; 124 struct mmc *mmc; 125 struct udevice *dev; 126 void __iomem *regbase; 127 unsigned long mclk; 128 unsigned int version; 129 u32 caps; 130 #define UNIPHIER_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */ 131 #define UNIPHIER_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */ 132 #define UNIPHIER_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */ 133 }; 134 135 static dma_addr_t __dma_map_single(void *ptr, size_t size, 136 enum dma_data_direction dir) 137 { 138 unsigned long addr = (unsigned long)ptr; 139 140 if (dir == DMA_FROM_DEVICE) 141 invalidate_dcache_range(addr, addr + size); 142 else 143 flush_dcache_range(addr, addr + size); 144 145 return addr; 146 } 147 148 static void __dma_unmap_single(dma_addr_t addr, size_t size, 149 enum dma_data_direction dir) 150 { 151 if (dir != DMA_TO_DEVICE) 152 invalidate_dcache_range(addr, addr + size); 153 } 154 155 static int uniphier_sd_check_error(struct uniphier_sd_priv *priv) 156 { 157 u32 info2 = readl(priv->regbase + UNIPHIER_SD_INFO2); 158 159 if (info2 & UNIPHIER_SD_INFO2_ERR_RTO) { 160 /* 161 * TIMEOUT must be returned for unsupported command. Do not 162 * display error log since this might be a part of sequence to 163 * distinguish between SD and MMC. 164 */ 165 return -ETIMEDOUT; 166 } 167 168 if (info2 & UNIPHIER_SD_INFO2_ERR_TO) { 169 dev_err(priv->dev, "timeout error\n"); 170 return -ETIMEDOUT; 171 } 172 173 if (info2 & (UNIPHIER_SD_INFO2_ERR_END | UNIPHIER_SD_INFO2_ERR_CRC | 174 UNIPHIER_SD_INFO2_ERR_IDX)) { 175 dev_err(priv->dev, "communication out of sync\n"); 176 return -EILSEQ; 177 } 178 179 if (info2 & (UNIPHIER_SD_INFO2_ERR_ILA | UNIPHIER_SD_INFO2_ERR_ILR | 180 UNIPHIER_SD_INFO2_ERR_ILW)) { 181 dev_err(priv->dev, "illegal access\n"); 182 return -EIO; 183 } 184 185 return 0; 186 } 187 188 static int uniphier_sd_wait_for_irq(struct uniphier_sd_priv *priv, 189 unsigned int reg, u32 flag) 190 { 191 long wait = 1000000; 192 int ret; 193 194 while (!(readl(priv->regbase + reg) & flag)) { 195 if (wait-- < 0) { 196 dev_err(priv->dev, "timeout\n"); 197 return -ETIMEDOUT; 198 } 199 200 ret = uniphier_sd_check_error(priv); 201 if (ret) 202 return ret; 203 204 udelay(1); 205 } 206 207 return 0; 208 } 209 210 static int uniphier_sd_pio_read_one_block(struct mmc *mmc, u32 **pbuf, 211 uint blocksize) 212 { 213 struct uniphier_sd_priv *priv = mmc->priv; 214 int i, ret; 215 216 /* wait until the buffer is filled with data */ 217 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2, 218 UNIPHIER_SD_INFO2_BRE); 219 if (ret) 220 return ret; 221 222 /* 223 * Clear the status flag _before_ read the buffer out because 224 * UNIPHIER_SD_INFO2_BRE is edge-triggered, not level-triggered. 225 */ 226 writel(0, priv->regbase + UNIPHIER_SD_INFO2); 227 228 if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { 229 for (i = 0; i < blocksize / 4; i++) 230 *(*pbuf)++ = readl(priv->regbase + UNIPHIER_SD_BUF); 231 } else { 232 for (i = 0; i < blocksize / 4; i++) 233 put_unaligned(readl(priv->regbase + UNIPHIER_SD_BUF), 234 (*pbuf)++); 235 } 236 237 return 0; 238 } 239 240 static int uniphier_sd_pio_write_one_block(struct mmc *mmc, const u32 **pbuf, 241 uint blocksize) 242 { 243 struct uniphier_sd_priv *priv = mmc->priv; 244 int i, ret; 245 246 /* wait until the buffer becomes empty */ 247 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2, 248 UNIPHIER_SD_INFO2_BWE); 249 if (ret) 250 return ret; 251 252 writel(0, priv->regbase + UNIPHIER_SD_INFO2); 253 254 if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { 255 for (i = 0; i < blocksize / 4; i++) 256 writel(*(*pbuf)++, priv->regbase + UNIPHIER_SD_BUF); 257 } else { 258 for (i = 0; i < blocksize / 4; i++) 259 writel(get_unaligned((*pbuf)++), 260 priv->regbase + UNIPHIER_SD_BUF); 261 } 262 263 return 0; 264 } 265 266 static int uniphier_sd_pio_xfer(struct mmc *mmc, struct mmc_data *data) 267 { 268 u32 *dest = (u32 *)data->dest; 269 const u32 *src = (const u32 *)data->src; 270 int i, ret; 271 272 for (i = 0; i < data->blocks; i++) { 273 if (data->flags & MMC_DATA_READ) 274 ret = uniphier_sd_pio_read_one_block(mmc, &dest, 275 data->blocksize); 276 else 277 ret = uniphier_sd_pio_write_one_block(mmc, &src, 278 data->blocksize); 279 if (ret) 280 return ret; 281 } 282 283 return 0; 284 } 285 286 static void uniphier_sd_dma_start(struct uniphier_sd_priv *priv, 287 dma_addr_t dma_addr) 288 { 289 u32 tmp; 290 291 writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO1); 292 writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO2); 293 294 /* enable DMA */ 295 tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE); 296 tmp |= UNIPHIER_SD_EXTMODE_DMA_EN; 297 writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE); 298 299 writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_L); 300 301 /* suppress the warning "right shift count >= width of type" */ 302 dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr)); 303 304 writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_H); 305 306 writel(UNIPHIER_SD_DMA_CTL_START, priv->regbase + UNIPHIER_SD_DMA_CTL); 307 } 308 309 static int uniphier_sd_dma_wait_for_irq(struct uniphier_sd_priv *priv, u32 flag, 310 unsigned int blocks) 311 { 312 long wait = 1000000 + 10 * blocks; 313 314 while (!(readl(priv->regbase + UNIPHIER_SD_DMA_INFO1) & flag)) { 315 if (wait-- < 0) { 316 dev_err(priv->dev, "timeout during DMA\n"); 317 return -ETIMEDOUT; 318 } 319 320 udelay(10); 321 } 322 323 if (readl(priv->regbase + UNIPHIER_SD_DMA_INFO2)) { 324 dev_err(priv->dev, "error during DMA\n"); 325 return -EIO; 326 } 327 328 return 0; 329 } 330 331 static int uniphier_sd_dma_xfer(struct mmc *mmc, struct mmc_data *data) 332 { 333 struct uniphier_sd_priv *priv = mmc->priv; 334 size_t len = data->blocks * data->blocksize; 335 void *buf; 336 enum dma_data_direction dir; 337 dma_addr_t dma_addr; 338 u32 poll_flag, tmp; 339 int ret; 340 341 tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE); 342 343 if (data->flags & MMC_DATA_READ) { 344 buf = data->dest; 345 dir = DMA_FROM_DEVICE; 346 poll_flag = UNIPHIER_SD_DMA_INFO1_END_RD2; 347 tmp |= UNIPHIER_SD_DMA_MODE_DIR_RD; 348 } else { 349 buf = (void *)data->src; 350 dir = DMA_TO_DEVICE; 351 poll_flag = UNIPHIER_SD_DMA_INFO1_END_WR; 352 tmp &= ~UNIPHIER_SD_DMA_MODE_DIR_RD; 353 } 354 355 writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE); 356 357 dma_addr = __dma_map_single(buf, len, dir); 358 359 uniphier_sd_dma_start(priv, dma_addr); 360 361 ret = uniphier_sd_dma_wait_for_irq(priv, poll_flag, data->blocks); 362 363 __dma_unmap_single(dma_addr, len, dir); 364 365 return ret; 366 } 367 368 /* check if the address is DMA'able */ 369 static bool uniphier_sd_addr_is_dmaable(unsigned long addr) 370 { 371 if (!IS_ALIGNED(addr, UNIPHIER_SD_DMA_MINALIGN)) 372 return false; 373 374 #if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \ 375 defined(CONFIG_SPL_BUILD) 376 /* 377 * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways 378 * of L2, which is unreachable from the DMA engine. 379 */ 380 if (addr < CONFIG_SPL_STACK) 381 return false; 382 #endif 383 384 return true; 385 } 386 387 static int uniphier_sd_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 388 struct mmc_data *data) 389 { 390 struct uniphier_sd_priv *priv = mmc->priv; 391 int ret; 392 u32 tmp; 393 394 if (readl(priv->regbase + UNIPHIER_SD_INFO2) & UNIPHIER_SD_INFO2_CBSY) { 395 dev_err(priv->dev, "command busy\n"); 396 return -EBUSY; 397 } 398 399 /* clear all status flags */ 400 writel(0, priv->regbase + UNIPHIER_SD_INFO1); 401 writel(0, priv->regbase + UNIPHIER_SD_INFO2); 402 403 /* disable DMA once */ 404 tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE); 405 tmp &= ~UNIPHIER_SD_EXTMODE_DMA_EN; 406 writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE); 407 408 writel(cmd->cmdarg, priv->regbase + UNIPHIER_SD_ARG); 409 410 tmp = cmd->cmdidx; 411 412 if (data) { 413 writel(data->blocksize, priv->regbase + UNIPHIER_SD_SIZE); 414 writel(data->blocks, priv->regbase + UNIPHIER_SD_SECCNT); 415 416 /* Do not send CMD12 automatically */ 417 tmp |= UNIPHIER_SD_CMD_NOSTOP | UNIPHIER_SD_CMD_DATA; 418 419 if (data->blocks > 1) 420 tmp |= UNIPHIER_SD_CMD_MULTI; 421 422 if (data->flags & MMC_DATA_READ) 423 tmp |= UNIPHIER_SD_CMD_RD; 424 } 425 426 /* 427 * Do not use the response type auto-detection on this hardware. 428 * CMD8, for example, has different response types on SD and eMMC, 429 * while this controller always assumes the response type for SD. 430 * Set the response type manually. 431 */ 432 switch (cmd->resp_type) { 433 case MMC_RSP_NONE: 434 tmp |= UNIPHIER_SD_CMD_RSP_NONE; 435 break; 436 case MMC_RSP_R1: 437 tmp |= UNIPHIER_SD_CMD_RSP_R1; 438 break; 439 case MMC_RSP_R1b: 440 tmp |= UNIPHIER_SD_CMD_RSP_R1B; 441 break; 442 case MMC_RSP_R2: 443 tmp |= UNIPHIER_SD_CMD_RSP_R2; 444 break; 445 case MMC_RSP_R3: 446 tmp |= UNIPHIER_SD_CMD_RSP_R3; 447 break; 448 default: 449 dev_err(priv->dev, "unknown response type\n"); 450 return -EINVAL; 451 } 452 453 dev_dbg(priv->dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n", 454 cmd->cmdidx, tmp, cmd->cmdarg); 455 writel(tmp, priv->regbase + UNIPHIER_SD_CMD); 456 457 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1, 458 UNIPHIER_SD_INFO1_RSP); 459 if (ret) 460 return ret; 461 462 if (cmd->resp_type & MMC_RSP_136) { 463 u32 rsp_127_104 = readl(priv->regbase + UNIPHIER_SD_RSP76); 464 u32 rsp_103_72 = readl(priv->regbase + UNIPHIER_SD_RSP54); 465 u32 rsp_71_40 = readl(priv->regbase + UNIPHIER_SD_RSP32); 466 u32 rsp_39_8 = readl(priv->regbase + UNIPHIER_SD_RSP10); 467 468 cmd->response[0] = (rsp_127_104 & 0xffffff) << 8 | 469 (rsp_103_72 & 0xff); 470 cmd->response[1] = (rsp_103_72 & 0xffffff) << 8 | 471 (rsp_71_40 & 0xff); 472 cmd->response[2] = (rsp_71_40 & 0xffffff) << 8 | 473 (rsp_39_8 & 0xff); 474 cmd->response[3] = (rsp_39_8 & 0xffffff) << 8; 475 } else { 476 /* bit 39-8 */ 477 cmd->response[0] = readl(priv->regbase + UNIPHIER_SD_RSP10); 478 } 479 480 if (data) { 481 /* use DMA if the HW supports it and the buffer is aligned */ 482 if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL && 483 uniphier_sd_addr_is_dmaable((long)data->src)) 484 ret = uniphier_sd_dma_xfer(mmc, data); 485 else 486 ret = uniphier_sd_pio_xfer(mmc, data); 487 488 ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1, 489 UNIPHIER_SD_INFO1_CMP); 490 if (ret) 491 return ret; 492 } 493 494 return ret; 495 } 496 497 static void uniphier_sd_set_bus_width(struct uniphier_sd_priv *priv, 498 struct mmc *mmc) 499 { 500 u32 val, tmp; 501 502 switch (mmc->bus_width) { 503 case 1: 504 val = UNIPHIER_SD_OPTION_WIDTH_1; 505 break; 506 case 4: 507 val = UNIPHIER_SD_OPTION_WIDTH_4; 508 break; 509 case 8: 510 val = UNIPHIER_SD_OPTION_WIDTH_8; 511 break; 512 default: 513 BUG(); 514 break; 515 } 516 517 tmp = readl(priv->regbase + UNIPHIER_SD_OPTION); 518 tmp &= ~UNIPHIER_SD_OPTION_WIDTH_MASK; 519 tmp |= val; 520 writel(tmp, priv->regbase + UNIPHIER_SD_OPTION); 521 } 522 523 static void uniphier_sd_set_ddr_mode(struct uniphier_sd_priv *priv, 524 struct mmc *mmc) 525 { 526 u32 tmp; 527 528 tmp = readl(priv->regbase + UNIPHIER_SD_IF_MODE); 529 if (mmc->ddr_mode) 530 tmp |= UNIPHIER_SD_IF_MODE_DDR; 531 else 532 tmp &= ~UNIPHIER_SD_IF_MODE_DDR; 533 writel(tmp, priv->regbase + UNIPHIER_SD_IF_MODE); 534 } 535 536 static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv, 537 struct mmc *mmc) 538 { 539 unsigned int divisor; 540 u32 val, tmp; 541 542 if (!mmc->clock) 543 return; 544 545 divisor = DIV_ROUND_UP(priv->mclk, mmc->clock); 546 547 if (divisor <= 1) 548 val = UNIPHIER_SD_CLKCTL_DIV1; 549 else if (divisor <= 2) 550 val = UNIPHIER_SD_CLKCTL_DIV2; 551 else if (divisor <= 4) 552 val = UNIPHIER_SD_CLKCTL_DIV4; 553 else if (divisor <= 8) 554 val = UNIPHIER_SD_CLKCTL_DIV8; 555 else if (divisor <= 16) 556 val = UNIPHIER_SD_CLKCTL_DIV16; 557 else if (divisor <= 32) 558 val = UNIPHIER_SD_CLKCTL_DIV32; 559 else if (divisor <= 64) 560 val = UNIPHIER_SD_CLKCTL_DIV64; 561 else if (divisor <= 128) 562 val = UNIPHIER_SD_CLKCTL_DIV128; 563 else if (divisor <= 256) 564 val = UNIPHIER_SD_CLKCTL_DIV256; 565 else if (divisor <= 512 || !(priv->caps & UNIPHIER_SD_CAP_DIV1024)) 566 val = UNIPHIER_SD_CLKCTL_DIV512; 567 else 568 val = UNIPHIER_SD_CLKCTL_DIV1024; 569 570 tmp = readl(priv->regbase + UNIPHIER_SD_CLKCTL); 571 572 /* stop the clock before changing its rate to avoid a glitch signal */ 573 tmp &= ~UNIPHIER_SD_CLKCTL_SCLKEN; 574 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); 575 576 tmp &= ~UNIPHIER_SD_CLKCTL_DIV_MASK; 577 tmp |= val | UNIPHIER_SD_CLKCTL_OFFEN; 578 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); 579 580 tmp |= UNIPHIER_SD_CLKCTL_SCLKEN; 581 writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); 582 } 583 584 static void uniphier_sd_set_ios(struct mmc *mmc) 585 { 586 struct uniphier_sd_priv *priv = mmc->priv; 587 588 dev_dbg(priv->dev, "clock %uHz, DDRmode %d, width %u\n", 589 mmc->clock, mmc->ddr_mode, mmc->bus_width); 590 591 uniphier_sd_set_bus_width(priv, mmc); 592 uniphier_sd_set_ddr_mode(priv, mmc); 593 uniphier_sd_set_clk_rate(priv, mmc); 594 595 udelay(1000); 596 } 597 598 static int uniphier_sd_init(struct mmc *mmc) 599 { 600 struct uniphier_sd_priv *priv = mmc->priv; 601 u32 tmp; 602 603 /* soft reset of the host */ 604 tmp = readl(priv->regbase + UNIPHIER_SD_SOFT_RST); 605 tmp &= ~UNIPHIER_SD_SOFT_RST_RSTX; 606 writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST); 607 tmp |= UNIPHIER_SD_SOFT_RST_RSTX; 608 writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST); 609 610 /* FIXME: implement eMMC hw_reset */ 611 612 writel(UNIPHIER_SD_STOP_SEC, priv->regbase + UNIPHIER_SD_STOP); 613 614 /* 615 * Connected to 32bit AXI. 616 * This register dropped backward compatibility at version 0x10. 617 * Write an appropriate value depending on the IP version. 618 */ 619 writel(priv->version >= 0x10 ? 0x00000101 : 0x00000000, 620 priv->regbase + UNIPHIER_SD_HOST_MODE); 621 622 if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL) { 623 tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE); 624 tmp |= UNIPHIER_SD_DMA_MODE_ADDR_INC; 625 writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE); 626 } 627 628 return 0; 629 } 630 631 static int uniphier_sd_getcd(struct mmc *mmc) 632 { 633 struct uniphier_sd_priv *priv = mmc->priv; 634 635 if (priv->caps & UNIPHIER_SD_CAP_NONREMOVABLE) 636 return 1; 637 638 return !!(readl(priv->regbase + UNIPHIER_SD_INFO1) & 639 UNIPHIER_SD_INFO1_CD); 640 } 641 642 static const struct mmc_ops uniphier_sd_ops = { 643 .send_cmd = uniphier_sd_send_cmd, 644 .set_ios = uniphier_sd_set_ios, 645 .init = uniphier_sd_init, 646 .getcd = uniphier_sd_getcd, 647 }; 648 649 int uniphier_sd_probe(struct udevice *dev) 650 { 651 struct uniphier_sd_priv *priv = dev_get_priv(dev); 652 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); 653 fdt_addr_t base; 654 struct clk clk; 655 int ret; 656 657 priv->dev = dev; 658 659 base = dev_get_addr(dev); 660 if (base == FDT_ADDR_T_NONE) 661 return -EINVAL; 662 663 priv->regbase = devm_ioremap(dev, base, SZ_2K); 664 if (!priv->regbase) 665 return -ENOMEM; 666 667 ret = clk_get_by_index(dev, 0, &clk); 668 if (ret < 0) { 669 dev_err(dev, "failed to get host clock\n"); 670 return ret; 671 } 672 673 /* set to max rate */ 674 priv->mclk = clk_set_rate(&clk, ULONG_MAX); 675 if (IS_ERR_VALUE(priv->mclk)) { 676 dev_err(dev, "failed to set rate for host clock\n"); 677 clk_free(&clk); 678 return priv->mclk; 679 } 680 681 ret = clk_enable(&clk); 682 clk_free(&clk); 683 if (ret) { 684 dev_err(dev, "failed to enable host clock\n"); 685 return ret; 686 } 687 688 priv->cfg.name = dev->name; 689 priv->cfg.ops = &uniphier_sd_ops; 690 priv->cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; 691 692 switch (fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", 1)) { 693 case 8: 694 priv->cfg.host_caps |= MMC_MODE_8BIT; 695 break; 696 case 4: 697 priv->cfg.host_caps |= MMC_MODE_4BIT; 698 break; 699 case 1: 700 break; 701 default: 702 dev_err(dev, "Invalid \"bus-width\" value\n"); 703 return -EINVAL; 704 } 705 706 if (fdt_get_property(gd->fdt_blob, dev->of_offset, "non-removable", 707 NULL)) 708 priv->caps |= UNIPHIER_SD_CAP_NONREMOVABLE; 709 710 priv->version = readl(priv->regbase + UNIPHIER_SD_VERSION) & 711 UNIPHIER_SD_VERSION_IP; 712 dev_dbg(dev, "version %x\n", priv->version); 713 if (priv->version >= 0x10) { 714 priv->caps |= UNIPHIER_SD_CAP_DMA_INTERNAL; 715 priv->caps |= UNIPHIER_SD_CAP_DIV1024; 716 } 717 718 priv->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34; 719 priv->cfg.f_min = priv->mclk / 720 (priv->caps & UNIPHIER_SD_CAP_DIV1024 ? 1024 : 512); 721 priv->cfg.f_max = priv->mclk; 722 priv->cfg.b_max = U32_MAX; /* max value of UNIPHIER_SD_SECCNT */ 723 724 priv->mmc = mmc_create(&priv->cfg, priv); 725 if (!priv->mmc) 726 return -EIO; 727 728 upriv->mmc = priv->mmc; 729 priv->mmc->dev = dev; 730 731 return 0; 732 } 733 734 int uniphier_sd_remove(struct udevice *dev) 735 { 736 struct uniphier_sd_priv *priv = dev_get_priv(dev); 737 738 mmc_destroy(priv->mmc); 739 740 return 0; 741 } 742 743 static const struct udevice_id uniphier_sd_match[] = { 744 { .compatible = "socionext,uniphier-sdhc" }, 745 { /* sentinel */ } 746 }; 747 748 U_BOOT_DRIVER(uniphier_mmc) = { 749 .name = "uniphier-mmc", 750 .id = UCLASS_MMC, 751 .of_match = uniphier_sd_match, 752 .probe = uniphier_sd_probe, 753 .remove = uniphier_sd_remove, 754 .priv_auto_alloc_size = sizeof(struct uniphier_sd_priv), 755 }; 756