1 /* 2 * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> 3 * 4 * Loosely based on the old code and Linux's PXA MMC driver 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/arch/hardware.h> 11 #include <asm/arch/regs-mmc.h> 12 #include <asm/errno.h> 13 #include <asm/io.h> 14 #include <malloc.h> 15 #include <mmc.h> 16 17 /* PXAMMC Generic default config for various CPUs */ 18 #if defined(CONFIG_CPU_PXA25X) 19 #define PXAMMC_FIFO_SIZE 1 20 #define PXAMMC_MIN_SPEED 312500 21 #define PXAMMC_MAX_SPEED 20000000 22 #define PXAMMC_HOST_CAPS (0) 23 #elif defined(CONFIG_CPU_PXA27X) 24 #define PXAMMC_CRC_SKIP 25 #define PXAMMC_FIFO_SIZE 32 26 #define PXAMMC_MIN_SPEED 304000 27 #define PXAMMC_MAX_SPEED 19500000 28 #define PXAMMC_HOST_CAPS (MMC_MODE_4BIT) 29 #elif defined(CONFIG_CPU_MONAHANS) 30 #define PXAMMC_FIFO_SIZE 32 31 #define PXAMMC_MIN_SPEED 304000 32 #define PXAMMC_MAX_SPEED 26000000 33 #define PXAMMC_HOST_CAPS (MMC_MODE_4BIT | MMC_MODE_HS) 34 #else 35 #error "This CPU isn't supported by PXA MMC!" 36 #endif 37 38 #define MMC_STAT_ERRORS \ 39 (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN | \ 40 MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE | \ 41 MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR) 42 43 /* 1 millisecond (in wait cycles below it's 100 x 10uS waits) */ 44 #define PXA_MMC_TIMEOUT 100 45 46 struct pxa_mmc_priv { 47 struct pxa_mmc_regs *regs; 48 }; 49 50 /* Wait for bit to be set */ 51 static int pxa_mmc_wait(struct mmc *mmc, uint32_t mask) 52 { 53 struct pxa_mmc_priv *priv = mmc->priv; 54 struct pxa_mmc_regs *regs = priv->regs; 55 unsigned int timeout = PXA_MMC_TIMEOUT; 56 57 /* Wait for bit to be set */ 58 while (--timeout) { 59 if (readl(®s->stat) & mask) 60 break; 61 udelay(10); 62 } 63 64 if (!timeout) 65 return -ETIMEDOUT; 66 67 return 0; 68 } 69 70 static int pxa_mmc_stop_clock(struct mmc *mmc) 71 { 72 struct pxa_mmc_priv *priv = mmc->priv; 73 struct pxa_mmc_regs *regs = priv->regs; 74 unsigned int timeout = PXA_MMC_TIMEOUT; 75 76 /* If the clock aren't running, exit */ 77 if (!(readl(®s->stat) & MMC_STAT_CLK_EN)) 78 return 0; 79 80 /* Tell the controller to turn off the clock */ 81 writel(MMC_STRPCL_STOP_CLK, ®s->strpcl); 82 83 /* Wait until the clock are off */ 84 while (--timeout) { 85 if (!(readl(®s->stat) & MMC_STAT_CLK_EN)) 86 break; 87 udelay(10); 88 } 89 90 /* The clock refused to stop, scream and die a painful death */ 91 if (!timeout) 92 return -ETIMEDOUT; 93 94 /* The clock stopped correctly */ 95 return 0; 96 } 97 98 static int pxa_mmc_start_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 99 uint32_t cmdat) 100 { 101 struct pxa_mmc_priv *priv = mmc->priv; 102 struct pxa_mmc_regs *regs = priv->regs; 103 int ret; 104 105 /* The card can send a "busy" response */ 106 if (cmd->resp_type & MMC_RSP_BUSY) 107 cmdat |= MMC_CMDAT_BUSY; 108 109 /* Inform the controller about response type */ 110 switch (cmd->resp_type) { 111 case MMC_RSP_R1: 112 case MMC_RSP_R1b: 113 cmdat |= MMC_CMDAT_R1; 114 break; 115 case MMC_RSP_R2: 116 cmdat |= MMC_CMDAT_R2; 117 break; 118 case MMC_RSP_R3: 119 cmdat |= MMC_CMDAT_R3; 120 break; 121 default: 122 break; 123 } 124 125 /* Load command and it's arguments into the controller */ 126 writel(cmd->cmdidx, ®s->cmd); 127 writel(cmd->cmdarg >> 16, ®s->argh); 128 writel(cmd->cmdarg & 0xffff, ®s->argl); 129 writel(cmdat, ®s->cmdat); 130 131 /* Start the controller clock and wait until they are started */ 132 writel(MMC_STRPCL_START_CLK, ®s->strpcl); 133 134 ret = pxa_mmc_wait(mmc, MMC_STAT_CLK_EN); 135 if (ret) 136 return ret; 137 138 /* Correct and happy end */ 139 return 0; 140 } 141 142 static int pxa_mmc_cmd_done(struct mmc *mmc, struct mmc_cmd *cmd) 143 { 144 struct pxa_mmc_priv *priv = mmc->priv; 145 struct pxa_mmc_regs *regs = priv->regs; 146 uint32_t a, b, c; 147 int i; 148 int stat; 149 150 /* Read the controller status */ 151 stat = readl(®s->stat); 152 153 /* 154 * Linux says: 155 * Did I mention this is Sick. We always need to 156 * discard the upper 8 bits of the first 16-bit word. 157 */ 158 a = readl(®s->res) & 0xffff; 159 for (i = 0; i < 4; i++) { 160 b = readl(®s->res) & 0xffff; 161 c = readl(®s->res) & 0xffff; 162 cmd->response[i] = (a << 24) | (b << 8) | (c >> 8); 163 a = c; 164 } 165 166 /* The command response didn't arrive */ 167 if (stat & MMC_STAT_TIME_OUT_RESPONSE) 168 return -ETIMEDOUT; 169 else if (stat & MMC_STAT_RES_CRC_ERROR 170 && cmd->resp_type & MMC_RSP_CRC) { 171 #ifdef PXAMMC_CRC_SKIP 172 if (cmd->resp_type & MMC_RSP_136 173 && cmd->response[0] & (1 << 31)) 174 printf("Ignoring CRC, this may be dangerous!\n"); 175 else 176 #endif 177 return -EILSEQ; 178 } 179 180 /* The command response was successfully read */ 181 return 0; 182 } 183 184 static int pxa_mmc_do_read_xfer(struct mmc *mmc, struct mmc_data *data) 185 { 186 struct pxa_mmc_priv *priv = mmc->priv; 187 struct pxa_mmc_regs *regs = priv->regs; 188 uint32_t len; 189 uint32_t *buf = (uint32_t *)data->dest; 190 int size; 191 int ret; 192 193 len = data->blocks * data->blocksize; 194 195 while (len) { 196 /* The controller has data ready */ 197 if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) { 198 size = min(len, (uint32_t)PXAMMC_FIFO_SIZE); 199 len -= size; 200 size /= 4; 201 202 /* Read data into the buffer */ 203 while (size--) 204 *buf++ = readl(®s->rxfifo); 205 206 } 207 208 if (readl(®s->stat) & MMC_STAT_ERRORS) 209 return -EIO; 210 } 211 212 /* Wait for the transmission-done interrupt */ 213 ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE); 214 if (ret) 215 return ret; 216 217 return 0; 218 } 219 220 static int pxa_mmc_do_write_xfer(struct mmc *mmc, struct mmc_data *data) 221 { 222 struct pxa_mmc_priv *priv = mmc->priv; 223 struct pxa_mmc_regs *regs = priv->regs; 224 uint32_t len; 225 uint32_t *buf = (uint32_t *)data->src; 226 int size; 227 int ret; 228 229 len = data->blocks * data->blocksize; 230 231 while (len) { 232 /* The controller is ready to receive data */ 233 if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) { 234 size = min(len, (uint32_t)PXAMMC_FIFO_SIZE); 235 len -= size; 236 size /= 4; 237 238 while (size--) 239 writel(*buf++, ®s->txfifo); 240 241 if (min(len, (uint32_t)PXAMMC_FIFO_SIZE) < 32) 242 writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf); 243 } 244 245 if (readl(®s->stat) & MMC_STAT_ERRORS) 246 return -EIO; 247 } 248 249 /* Wait for the transmission-done interrupt */ 250 ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE); 251 if (ret) 252 return ret; 253 254 /* Wait until the data are really written to the card */ 255 ret = pxa_mmc_wait(mmc, MMC_STAT_PRG_DONE); 256 if (ret) 257 return ret; 258 259 return 0; 260 } 261 262 static int pxa_mmc_request(struct mmc *mmc, struct mmc_cmd *cmd, 263 struct mmc_data *data) 264 { 265 struct pxa_mmc_priv *priv = mmc->priv; 266 struct pxa_mmc_regs *regs = priv->regs; 267 uint32_t cmdat = 0; 268 int ret; 269 270 /* Stop the controller */ 271 ret = pxa_mmc_stop_clock(mmc); 272 if (ret) 273 return ret; 274 275 /* If we're doing data transfer, configure the controller accordingly */ 276 if (data) { 277 writel(data->blocks, ®s->nob); 278 writel(data->blocksize, ®s->blklen); 279 /* This delay can be optimized, but stick with max value */ 280 writel(0xffff, ®s->rdto); 281 cmdat |= MMC_CMDAT_DATA_EN; 282 if (data->flags & MMC_DATA_WRITE) 283 cmdat |= MMC_CMDAT_WRITE; 284 } 285 286 /* Run in 4bit mode if the card can do it */ 287 if (mmc->bus_width == 4) 288 cmdat |= MMC_CMDAT_SD_4DAT; 289 290 /* Execute the command */ 291 ret = pxa_mmc_start_cmd(mmc, cmd, cmdat); 292 if (ret) 293 return ret; 294 295 /* Wait until the command completes */ 296 ret = pxa_mmc_wait(mmc, MMC_STAT_END_CMD_RES); 297 if (ret) 298 return ret; 299 300 /* Read back the result */ 301 ret = pxa_mmc_cmd_done(mmc, cmd); 302 if (ret) 303 return ret; 304 305 /* In case there was a data transfer scheduled, do it */ 306 if (data) { 307 if (data->flags & MMC_DATA_WRITE) 308 pxa_mmc_do_write_xfer(mmc, data); 309 else 310 pxa_mmc_do_read_xfer(mmc, data); 311 } 312 313 return 0; 314 } 315 316 static void pxa_mmc_set_ios(struct mmc *mmc) 317 { 318 struct pxa_mmc_priv *priv = mmc->priv; 319 struct pxa_mmc_regs *regs = priv->regs; 320 uint32_t tmp; 321 uint32_t pxa_mmc_clock; 322 323 if (!mmc->clock) { 324 pxa_mmc_stop_clock(mmc); 325 return; 326 } 327 328 /* PXA3xx can do 26MHz with special settings. */ 329 if (mmc->clock == 26000000) { 330 writel(0x7, ®s->clkrt); 331 return; 332 } 333 334 /* Set clock to the card the usual way. */ 335 pxa_mmc_clock = 0; 336 tmp = mmc->cfg->f_max / mmc->clock; 337 tmp += tmp % 2; 338 339 while (tmp > 1) { 340 pxa_mmc_clock++; 341 tmp >>= 1; 342 } 343 344 writel(pxa_mmc_clock, ®s->clkrt); 345 } 346 347 static int pxa_mmc_init(struct mmc *mmc) 348 { 349 struct pxa_mmc_priv *priv = mmc->priv; 350 struct pxa_mmc_regs *regs = priv->regs; 351 352 /* Make sure the clock are stopped */ 353 pxa_mmc_stop_clock(mmc); 354 355 /* Turn off SPI mode */ 356 writel(0, ®s->spi); 357 358 /* Set up maximum timeout to wait for command response */ 359 writel(MMC_RES_TO_MAX_MASK, ®s->resto); 360 361 /* Mask all interrupts */ 362 writel(~(MMC_I_MASK_TXFIFO_WR_REQ | MMC_I_MASK_RXFIFO_RD_REQ), 363 ®s->i_mask); 364 return 0; 365 } 366 367 static const struct mmc_ops pxa_mmc_ops = { 368 .send_cmd = pxa_mmc_request, 369 .set_ios = pxa_mmc_set_ios, 370 .init = pxa_mmc_init, 371 }; 372 373 static struct mmc_config pxa_mmc_cfg = { 374 .name = "PXA MMC", 375 .ops = &pxa_mmc_ops, 376 .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, 377 .f_max = PXAMMC_MAX_SPEED, 378 .f_min = PXAMMC_MIN_SPEED, 379 .host_caps = PXAMMC_HOST_CAPS, 380 .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, 381 }; 382 383 int pxa_mmc_register(int card_index) 384 { 385 struct mmc *mmc; 386 struct pxa_mmc_priv *priv; 387 uint32_t reg; 388 int ret = -ENOMEM; 389 390 priv = malloc(sizeof(struct pxa_mmc_priv)); 391 if (!priv) 392 goto err0; 393 394 memset(priv, 0, sizeof(*priv)); 395 396 switch (card_index) { 397 case 0: 398 priv->regs = (struct pxa_mmc_regs *)MMC0_BASE; 399 break; 400 case 1: 401 priv->regs = (struct pxa_mmc_regs *)MMC1_BASE; 402 break; 403 default: 404 ret = -EINVAL; 405 printf("PXA MMC: Invalid MMC controller ID (card_index = %d)\n", 406 card_index); 407 goto err1; 408 } 409 410 #ifndef CONFIG_CPU_MONAHANS /* PXA2xx */ 411 reg = readl(CKEN); 412 reg |= CKEN12_MMC; 413 writel(reg, CKEN); 414 #else /* PXA3xx */ 415 reg = readl(CKENA); 416 reg |= CKENA_12_MMC0 | CKENA_13_MMC1; 417 writel(reg, CKENA); 418 #endif 419 420 mmc = mmc_create(&pxa_mmc_cfg, priv); 421 if (mmc == NULL) 422 goto err1; 423 424 return 0; 425 426 err1: 427 free(priv); 428 err0: 429 return ret; 430 } 431