1 /* 2 * (C) Copyright 2008 3 * Texas Instruments, <www.ti.com> 4 * Sukumar Ghorai <s-ghorai@ti.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation's version 2 of 12 * the License. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <config.h> 26 #include <common.h> 27 #include <malloc.h> 28 #include <mmc.h> 29 #include <part.h> 30 #include <i2c.h> 31 #include <twl4030.h> 32 #include <twl6030.h> 33 #include <palmas.h> 34 #include <asm/gpio.h> 35 #include <asm/io.h> 36 #include <asm/arch/mmc_host_def.h> 37 #include <asm/arch/sys_proto.h> 38 39 /* simplify defines to OMAP_HSMMC_USE_GPIO */ 40 #if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ 41 (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT)) 42 #define OMAP_HSMMC_USE_GPIO 43 #else 44 #undef OMAP_HSMMC_USE_GPIO 45 #endif 46 47 /* common definitions for all OMAPs */ 48 #define SYSCTL_SRC (1 << 25) 49 #define SYSCTL_SRD (1 << 26) 50 51 struct omap_hsmmc_data { 52 struct hsmmc *base_addr; 53 struct mmc_config cfg; 54 #ifdef OMAP_HSMMC_USE_GPIO 55 int cd_gpio; 56 int wp_gpio; 57 #endif 58 }; 59 60 /* If we fail after 1 second wait, something is really bad */ 61 #define MAX_RETRY_MS 1000 62 63 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); 64 static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, 65 unsigned int siz); 66 67 #ifdef OMAP_HSMMC_USE_GPIO 68 static int omap_mmc_setup_gpio_in(int gpio, const char *label) 69 { 70 int ret; 71 72 #ifndef CONFIG_DM_GPIO 73 if (!gpio_is_valid(gpio)) 74 return -1; 75 #endif 76 ret = gpio_request(gpio, label); 77 if (ret) 78 return ret; 79 80 ret = gpio_direction_input(gpio); 81 if (ret) 82 return ret; 83 84 return gpio; 85 } 86 #endif 87 88 #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) 89 static void omap4_vmmc_pbias_config(struct mmc *mmc) 90 { 91 u32 value = 0; 92 93 value = readl((*ctrl)->control_pbiaslite); 94 value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); 95 writel(value, (*ctrl)->control_pbiaslite); 96 /* set VMMC to 3V */ 97 twl6030_power_mmc_init(); 98 value = readl((*ctrl)->control_pbiaslite); 99 value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; 100 writel(value, (*ctrl)->control_pbiaslite); 101 } 102 #endif 103 104 #if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) 105 static void omap5_pbias_config(struct mmc *mmc) 106 { 107 u32 value = 0; 108 109 value = readl((*ctrl)->control_pbias); 110 value &= ~SDCARD_PWRDNZ; 111 writel(value, (*ctrl)->control_pbias); 112 udelay(10); /* wait 10 us */ 113 value &= ~SDCARD_BIAS_PWRDNZ; 114 writel(value, (*ctrl)->control_pbias); 115 116 palmas_mmc1_poweron_ldo(); 117 118 value = readl((*ctrl)->control_pbias); 119 value |= SDCARD_BIAS_PWRDNZ; 120 writel(value, (*ctrl)->control_pbias); 121 udelay(150); /* wait 150 us */ 122 value |= SDCARD_PWRDNZ; 123 writel(value, (*ctrl)->control_pbias); 124 udelay(150); /* wait 150 us */ 125 } 126 #endif 127 128 static unsigned char mmc_board_init(struct mmc *mmc) 129 { 130 #if defined(CONFIG_OMAP34XX) 131 t2_t *t2_base = (t2_t *)T2_BASE; 132 struct prcm *prcm_base = (struct prcm *)PRCM_BASE; 133 u32 pbias_lite; 134 135 pbias_lite = readl(&t2_base->pbias_lite); 136 pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0); 137 writel(pbias_lite, &t2_base->pbias_lite); 138 139 writel(pbias_lite | PBIASLITEPWRDNZ1 | 140 PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, 141 &t2_base->pbias_lite); 142 143 writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL, 144 &t2_base->devconf0); 145 146 writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL, 147 &t2_base->devconf1); 148 149 /* Change from default of 52MHz to 26MHz if necessary */ 150 if (!(mmc->cfg->host_caps & MMC_MODE_HS_52MHz)) 151 writel(readl(&t2_base->ctl_prog_io1) & ~CTLPROGIO1SPEEDCTRL, 152 &t2_base->ctl_prog_io1); 153 154 writel(readl(&prcm_base->fclken1_core) | 155 EN_MMC1 | EN_MMC2 | EN_MMC3, 156 &prcm_base->fclken1_core); 157 158 writel(readl(&prcm_base->iclken1_core) | 159 EN_MMC1 | EN_MMC2 | EN_MMC3, 160 &prcm_base->iclken1_core); 161 #endif 162 163 #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) 164 /* PBIAS config needed for MMC1 only */ 165 if (mmc->block_dev.dev == 0) 166 omap4_vmmc_pbias_config(mmc); 167 #endif 168 #if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) 169 if (mmc->block_dev.dev == 0) 170 omap5_pbias_config(mmc); 171 #endif 172 173 return 0; 174 } 175 176 void mmc_init_stream(struct hsmmc *mmc_base) 177 { 178 ulong start; 179 180 writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con); 181 182 writel(MMC_CMD0, &mmc_base->cmd); 183 start = get_timer(0); 184 while (!(readl(&mmc_base->stat) & CC_MASK)) { 185 if (get_timer(0) - start > MAX_RETRY_MS) { 186 printf("%s: timedout waiting for cc!\n", __func__); 187 return; 188 } 189 } 190 writel(CC_MASK, &mmc_base->stat) 191 ; 192 writel(MMC_CMD0, &mmc_base->cmd) 193 ; 194 start = get_timer(0); 195 while (!(readl(&mmc_base->stat) & CC_MASK)) { 196 if (get_timer(0) - start > MAX_RETRY_MS) { 197 printf("%s: timedout waiting for cc2!\n", __func__); 198 return; 199 } 200 } 201 writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con); 202 } 203 204 205 static int omap_hsmmc_init_setup(struct mmc *mmc) 206 { 207 struct hsmmc *mmc_base; 208 unsigned int reg_val; 209 unsigned int dsor; 210 ulong start; 211 212 mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; 213 mmc_board_init(mmc); 214 215 writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, 216 &mmc_base->sysconfig); 217 start = get_timer(0); 218 while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0) { 219 if (get_timer(0) - start > MAX_RETRY_MS) { 220 printf("%s: timedout waiting for cc2!\n", __func__); 221 return TIMEOUT; 222 } 223 } 224 writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl); 225 start = get_timer(0); 226 while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0) { 227 if (get_timer(0) - start > MAX_RETRY_MS) { 228 printf("%s: timedout waiting for softresetall!\n", 229 __func__); 230 return TIMEOUT; 231 } 232 } 233 writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl); 234 writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP, 235 &mmc_base->capa); 236 237 reg_val = readl(&mmc_base->con) & RESERVED_MASK; 238 239 writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH | 240 MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK | 241 HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con); 242 243 dsor = 240; 244 mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK), 245 (ICE_STOP | DTO_15THDTO | CEN_DISABLE)); 246 mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, 247 (dsor << CLKD_OFFSET) | ICE_OSCILLATE); 248 start = get_timer(0); 249 while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { 250 if (get_timer(0) - start > MAX_RETRY_MS) { 251 printf("%s: timedout waiting for ics!\n", __func__); 252 return TIMEOUT; 253 } 254 } 255 writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); 256 257 writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl); 258 259 writel(IE_BADA | IE_CERR | IE_DEB | IE_DCRC | IE_DTO | IE_CIE | 260 IE_CEB | IE_CCRC | IE_CTO | IE_BRR | IE_BWR | IE_TC | IE_CC, 261 &mmc_base->ie); 262 263 mmc_init_stream(mmc_base); 264 265 return 0; 266 } 267 268 /* 269 * MMC controller internal finite state machine reset 270 * 271 * Used to reset command or data internal state machines, using respectively 272 * SRC or SRD bit of SYSCTL register 273 */ 274 static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) 275 { 276 ulong start; 277 278 mmc_reg_out(&mmc_base->sysctl, bit, bit); 279 280 /* 281 * CMD(DAT) lines reset procedures are slightly different 282 * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx). 283 * According to OMAP3 TRM: 284 * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it 285 * returns to 0x0. 286 * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset 287 * procedure steps must be as follows: 288 * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in 289 * MMCHS_SYSCTL register (SD_SYSCTL for AM335x). 290 * 2. Poll the SRC(SRD) bit until it is set to 0x1. 291 * 3. Wait until the SRC (SRD) bit returns to 0x0 292 * (reset procedure is completed). 293 */ 294 #if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ 295 defined(CONFIG_AM33XX) 296 if (!(readl(&mmc_base->sysctl) & bit)) { 297 start = get_timer(0); 298 while (!(readl(&mmc_base->sysctl) & bit)) { 299 if (get_timer(0) - start > MAX_RETRY_MS) 300 return; 301 } 302 } 303 #endif 304 start = get_timer(0); 305 while ((readl(&mmc_base->sysctl) & bit) != 0) { 306 if (get_timer(0) - start > MAX_RETRY_MS) { 307 printf("%s: timedout waiting for sysctl %x to clear\n", 308 __func__, bit); 309 return; 310 } 311 } 312 } 313 314 static int omap_hsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, 315 struct mmc_data *data) 316 { 317 struct hsmmc *mmc_base; 318 unsigned int flags, mmc_stat; 319 ulong start; 320 321 mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; 322 start = get_timer(0); 323 while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { 324 if (get_timer(0) - start > MAX_RETRY_MS) { 325 printf("%s: timedout waiting on cmd inhibit to clear\n", 326 __func__); 327 return TIMEOUT; 328 } 329 } 330 writel(0xFFFFFFFF, &mmc_base->stat); 331 start = get_timer(0); 332 while (readl(&mmc_base->stat)) { 333 if (get_timer(0) - start > MAX_RETRY_MS) { 334 printf("%s: timedout waiting for STAT (%x) to clear\n", 335 __func__, readl(&mmc_base->stat)); 336 return TIMEOUT; 337 } 338 } 339 /* 340 * CMDREG 341 * CMDIDX[13:8] : Command index 342 * DATAPRNT[5] : Data Present Select 343 * ENCMDIDX[4] : Command Index Check Enable 344 * ENCMDCRC[3] : Command CRC Check Enable 345 * RSPTYP[1:0] 346 * 00 = No Response 347 * 01 = Length 136 348 * 10 = Length 48 349 * 11 = Length 48 Check busy after response 350 */ 351 /* Delay added before checking the status of frq change 352 * retry not supported by mmc.c(core file) 353 */ 354 if (cmd->cmdidx == SD_CMD_APP_SEND_SCR) 355 udelay(50000); /* wait 50 ms */ 356 357 if (!(cmd->resp_type & MMC_RSP_PRESENT)) 358 flags = 0; 359 else if (cmd->resp_type & MMC_RSP_136) 360 flags = RSP_TYPE_LGHT136 | CICE_NOCHECK; 361 else if (cmd->resp_type & MMC_RSP_BUSY) 362 flags = RSP_TYPE_LGHT48B; 363 else 364 flags = RSP_TYPE_LGHT48; 365 366 /* enable default flags */ 367 flags = flags | (CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK | 368 MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | DE_DISABLE); 369 370 if (cmd->resp_type & MMC_RSP_CRC) 371 flags |= CCCE_CHECK; 372 if (cmd->resp_type & MMC_RSP_OPCODE) 373 flags |= CICE_CHECK; 374 375 if (data) { 376 if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) || 377 (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) { 378 flags |= (MSBS_MULTIBLK | BCE_ENABLE); 379 data->blocksize = 512; 380 writel(data->blocksize | (data->blocks << 16), 381 &mmc_base->blk); 382 } else 383 writel(data->blocksize | NBLK_STPCNT, &mmc_base->blk); 384 385 if (data->flags & MMC_DATA_READ) 386 flags |= (DP_DATA | DDIR_READ); 387 else 388 flags |= (DP_DATA | DDIR_WRITE); 389 } 390 391 writel(cmd->cmdarg, &mmc_base->arg); 392 udelay(20); /* To fix "No status update" error on eMMC */ 393 writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd); 394 395 start = get_timer(0); 396 do { 397 mmc_stat = readl(&mmc_base->stat); 398 if (get_timer(0) - start > MAX_RETRY_MS) { 399 printf("%s : timeout: No status update\n", __func__); 400 return TIMEOUT; 401 } 402 } while (!mmc_stat); 403 404 if ((mmc_stat & IE_CTO) != 0) { 405 mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC); 406 return TIMEOUT; 407 } else if ((mmc_stat & ERRI_MASK) != 0) 408 return -1; 409 410 if (mmc_stat & CC_MASK) { 411 writel(CC_MASK, &mmc_base->stat); 412 if (cmd->resp_type & MMC_RSP_PRESENT) { 413 if (cmd->resp_type & MMC_RSP_136) { 414 /* response type 2 */ 415 cmd->response[3] = readl(&mmc_base->rsp10); 416 cmd->response[2] = readl(&mmc_base->rsp32); 417 cmd->response[1] = readl(&mmc_base->rsp54); 418 cmd->response[0] = readl(&mmc_base->rsp76); 419 } else 420 /* response types 1, 1b, 3, 4, 5, 6 */ 421 cmd->response[0] = readl(&mmc_base->rsp10); 422 } 423 } 424 425 if (data && (data->flags & MMC_DATA_READ)) { 426 mmc_read_data(mmc_base, data->dest, 427 data->blocksize * data->blocks); 428 } else if (data && (data->flags & MMC_DATA_WRITE)) { 429 mmc_write_data(mmc_base, data->src, 430 data->blocksize * data->blocks); 431 } 432 return 0; 433 } 434 435 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size) 436 { 437 unsigned int *output_buf = (unsigned int *)buf; 438 unsigned int mmc_stat; 439 unsigned int count; 440 441 /* 442 * Start Polled Read 443 */ 444 count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; 445 count /= 4; 446 447 while (size) { 448 ulong start = get_timer(0); 449 do { 450 mmc_stat = readl(&mmc_base->stat); 451 if (get_timer(0) - start > MAX_RETRY_MS) { 452 printf("%s: timedout waiting for status!\n", 453 __func__); 454 return TIMEOUT; 455 } 456 } while (mmc_stat == 0); 457 458 if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0) 459 mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); 460 461 if ((mmc_stat & ERRI_MASK) != 0) 462 return 1; 463 464 if (mmc_stat & BRR_MASK) { 465 unsigned int k; 466 467 writel(readl(&mmc_base->stat) | BRR_MASK, 468 &mmc_base->stat); 469 for (k = 0; k < count; k++) { 470 *output_buf = readl(&mmc_base->data); 471 output_buf++; 472 } 473 size -= (count*4); 474 } 475 476 if (mmc_stat & BWR_MASK) 477 writel(readl(&mmc_base->stat) | BWR_MASK, 478 &mmc_base->stat); 479 480 if (mmc_stat & TC_MASK) { 481 writel(readl(&mmc_base->stat) | TC_MASK, 482 &mmc_base->stat); 483 break; 484 } 485 } 486 return 0; 487 } 488 489 static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, 490 unsigned int size) 491 { 492 unsigned int *input_buf = (unsigned int *)buf; 493 unsigned int mmc_stat; 494 unsigned int count; 495 496 /* 497 * Start Polled Write 498 */ 499 count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; 500 count /= 4; 501 502 while (size) { 503 ulong start = get_timer(0); 504 do { 505 mmc_stat = readl(&mmc_base->stat); 506 if (get_timer(0) - start > MAX_RETRY_MS) { 507 printf("%s: timedout waiting for status!\n", 508 __func__); 509 return TIMEOUT; 510 } 511 } while (mmc_stat == 0); 512 513 if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0) 514 mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD); 515 516 if ((mmc_stat & ERRI_MASK) != 0) 517 return 1; 518 519 if (mmc_stat & BWR_MASK) { 520 unsigned int k; 521 522 writel(readl(&mmc_base->stat) | BWR_MASK, 523 &mmc_base->stat); 524 for (k = 0; k < count; k++) { 525 writel(*input_buf, &mmc_base->data); 526 input_buf++; 527 } 528 size -= (count*4); 529 } 530 531 if (mmc_stat & BRR_MASK) 532 writel(readl(&mmc_base->stat) | BRR_MASK, 533 &mmc_base->stat); 534 535 if (mmc_stat & TC_MASK) { 536 writel(readl(&mmc_base->stat) | TC_MASK, 537 &mmc_base->stat); 538 break; 539 } 540 } 541 return 0; 542 } 543 544 static void omap_hsmmc_set_ios(struct mmc *mmc) 545 { 546 struct hsmmc *mmc_base; 547 unsigned int dsor = 0; 548 ulong start; 549 550 mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; 551 /* configue bus width */ 552 switch (mmc->bus_width) { 553 case 8: 554 writel(readl(&mmc_base->con) | DTW_8_BITMODE, 555 &mmc_base->con); 556 break; 557 558 case 4: 559 writel(readl(&mmc_base->con) & ~DTW_8_BITMODE, 560 &mmc_base->con); 561 writel(readl(&mmc_base->hctl) | DTW_4_BITMODE, 562 &mmc_base->hctl); 563 break; 564 565 case 1: 566 default: 567 writel(readl(&mmc_base->con) & ~DTW_8_BITMODE, 568 &mmc_base->con); 569 writel(readl(&mmc_base->hctl) & ~DTW_4_BITMODE, 570 &mmc_base->hctl); 571 break; 572 } 573 574 /* configure clock with 96Mhz system clock. 575 */ 576 if (mmc->clock != 0) { 577 dsor = (MMC_CLOCK_REFERENCE * 1000000 / mmc->clock); 578 if ((MMC_CLOCK_REFERENCE * 1000000) / dsor > mmc->clock) 579 dsor++; 580 } 581 582 mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK), 583 (ICE_STOP | DTO_15THDTO | CEN_DISABLE)); 584 585 mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, 586 (dsor << CLKD_OFFSET) | ICE_OSCILLATE); 587 588 start = get_timer(0); 589 while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) { 590 if (get_timer(0) - start > MAX_RETRY_MS) { 591 printf("%s: timedout waiting for ics!\n", __func__); 592 return; 593 } 594 } 595 writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); 596 } 597 598 #ifdef OMAP_HSMMC_USE_GPIO 599 static int omap_hsmmc_getcd(struct mmc *mmc) 600 { 601 struct omap_hsmmc_data *priv_data = mmc->priv; 602 int cd_gpio; 603 604 /* if no CD return as 1 */ 605 cd_gpio = priv_data->cd_gpio; 606 if (cd_gpio < 0) 607 return 1; 608 609 /* NOTE: assumes card detect signal is active-low */ 610 return !gpio_get_value(cd_gpio); 611 } 612 613 static int omap_hsmmc_getwp(struct mmc *mmc) 614 { 615 struct omap_hsmmc_data *priv_data = mmc->priv; 616 int wp_gpio; 617 618 /* if no WP return as 0 */ 619 wp_gpio = priv_data->wp_gpio; 620 if (wp_gpio < 0) 621 return 0; 622 623 /* NOTE: assumes write protect signal is active-high */ 624 return gpio_get_value(wp_gpio); 625 } 626 #endif 627 628 static const struct mmc_ops omap_hsmmc_ops = { 629 .send_cmd = omap_hsmmc_send_cmd, 630 .set_ios = omap_hsmmc_set_ios, 631 .init = omap_hsmmc_init_setup, 632 #ifdef OMAP_HSMMC_USE_GPIO 633 .getcd = omap_hsmmc_getcd, 634 .getwp = omap_hsmmc_getwp, 635 #endif 636 }; 637 638 int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, 639 int wp_gpio) 640 { 641 struct mmc *mmc; 642 struct omap_hsmmc_data *priv_data; 643 struct mmc_config *cfg; 644 uint host_caps_val; 645 646 priv_data = malloc(sizeof(*priv_data)); 647 if (priv_data == NULL) 648 return -1; 649 650 host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | 651 MMC_MODE_HC; 652 653 switch (dev_index) { 654 case 0: 655 priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; 656 break; 657 #ifdef OMAP_HSMMC2_BASE 658 case 1: 659 priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; 660 #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ 661 defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && \ 662 defined(CONFIG_HSMMC2_8BIT) 663 /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ 664 host_caps_val |= MMC_MODE_8BIT; 665 #endif 666 break; 667 #endif 668 #ifdef OMAP_HSMMC3_BASE 669 case 2: 670 priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; 671 #if (defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && defined(CONFIG_HSMMC3_8BIT) 672 /* Enable 8-bit interface for eMMC on DRA7XX */ 673 host_caps_val |= MMC_MODE_8BIT; 674 #endif 675 break; 676 #endif 677 default: 678 priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; 679 return 1; 680 } 681 #ifdef OMAP_HSMMC_USE_GPIO 682 /* on error gpio values are set to -1, which is what we want */ 683 priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); 684 priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); 685 #endif 686 687 cfg = &priv_data->cfg; 688 689 cfg->name = "OMAP SD/MMC"; 690 cfg->ops = &omap_hsmmc_ops; 691 692 cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; 693 cfg->host_caps = host_caps_val & ~host_caps_mask; 694 695 cfg->f_min = 400000; 696 697 if (f_max != 0) 698 cfg->f_max = f_max; 699 else { 700 if (cfg->host_caps & MMC_MODE_HS) { 701 if (cfg->host_caps & MMC_MODE_HS_52MHz) 702 cfg->f_max = 52000000; 703 else 704 cfg->f_max = 26000000; 705 } else 706 cfg->f_max = 20000000; 707 } 708 709 cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; 710 711 #if defined(CONFIG_OMAP34XX) 712 /* 713 * Silicon revs 2.1 and older do not support multiblock transfers. 714 */ 715 if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21)) 716 cfg->b_max = 1; 717 #endif 718 mmc = mmc_create(cfg, priv_data); 719 if (mmc == NULL) 720 return -1; 721 722 return 0; 723 } 724