1 /* 2 * Freescale i.MX28 SSP MMC driver 3 * 4 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 5 * on behalf of DENX Software Engineering GmbH 6 * 7 * Based on code from LTIB: 8 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 9 * Terry Lv 10 * 11 * Copyright 2007, Freescale Semiconductor, Inc 12 * Andy Fleming 13 * 14 * Based vaguely on the pxa mmc code: 15 * (C) Copyright 2003 16 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net 17 * 18 * SPDX-License-Identifier: GPL-2.0+ 19 */ 20 #include <common.h> 21 #include <malloc.h> 22 #include <mmc.h> 23 #include <asm/errno.h> 24 #include <asm/io.h> 25 #include <asm/arch/clock.h> 26 #include <asm/arch/imx-regs.h> 27 #include <asm/arch/sys_proto.h> 28 #include <asm/imx-common/dma.h> 29 #include <bouncebuf.h> 30 31 struct mxsmmc_priv { 32 int id; 33 struct mxs_ssp_regs *regs; 34 uint32_t buswidth; 35 int (*mmc_is_wp)(int); 36 int (*mmc_cd)(int); 37 struct mxs_dma_desc *desc; 38 struct mmc_config cfg; /* mmc configuration */ 39 }; 40 41 #define MXSMMC_MAX_TIMEOUT 10000 42 #define MXSMMC_SMALL_TRANSFER 512 43 44 static int mxsmmc_cd(struct mxsmmc_priv *priv) 45 { 46 struct mxs_ssp_regs *ssp_regs = priv->regs; 47 48 if (priv->mmc_cd) 49 return priv->mmc_cd(priv->id); 50 51 return !(readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT); 52 } 53 54 static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data) 55 { 56 struct mxs_ssp_regs *ssp_regs = priv->regs; 57 uint32_t *data_ptr; 58 int timeout = MXSMMC_MAX_TIMEOUT; 59 uint32_t reg; 60 uint32_t data_count = data->blocksize * data->blocks; 61 62 if (data->flags & MMC_DATA_READ) { 63 data_ptr = (uint32_t *)data->dest; 64 while (data_count && --timeout) { 65 reg = readl(&ssp_regs->hw_ssp_status); 66 if (!(reg & SSP_STATUS_FIFO_EMPTY)) { 67 *data_ptr++ = readl(&ssp_regs->hw_ssp_data); 68 data_count -= 4; 69 timeout = MXSMMC_MAX_TIMEOUT; 70 } else 71 udelay(1000); 72 } 73 } else { 74 data_ptr = (uint32_t *)data->src; 75 timeout *= 100; 76 while (data_count && --timeout) { 77 reg = readl(&ssp_regs->hw_ssp_status); 78 if (!(reg & SSP_STATUS_FIFO_FULL)) { 79 writel(*data_ptr++, &ssp_regs->hw_ssp_data); 80 data_count -= 4; 81 timeout = MXSMMC_MAX_TIMEOUT; 82 } else 83 udelay(1000); 84 } 85 } 86 87 return timeout ? 0 : COMM_ERR; 88 } 89 90 static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) 91 { 92 uint32_t data_count = data->blocksize * data->blocks; 93 int dmach; 94 struct mxs_dma_desc *desc = priv->desc; 95 void *addr; 96 unsigned int flags; 97 struct bounce_buffer bbstate; 98 99 memset(desc, 0, sizeof(struct mxs_dma_desc)); 100 desc->address = (dma_addr_t)desc; 101 102 if (data->flags & MMC_DATA_READ) { 103 priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; 104 addr = data->dest; 105 flags = GEN_BB_WRITE; 106 } else { 107 priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; 108 addr = (void *)data->src; 109 flags = GEN_BB_READ; 110 } 111 112 bounce_buffer_start(&bbstate, addr, data_count, flags); 113 114 priv->desc->cmd.address = (dma_addr_t)bbstate.bounce_buffer; 115 116 priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | 117 (data_count << MXS_DMA_DESC_BYTES_OFFSET); 118 119 dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; 120 mxs_dma_desc_append(dmach, priv->desc); 121 if (mxs_dma_go(dmach)) { 122 bounce_buffer_stop(&bbstate); 123 return COMM_ERR; 124 } 125 126 bounce_buffer_stop(&bbstate); 127 128 return 0; 129 } 130 131 /* 132 * Sends a command out on the bus. Takes the mmc pointer, 133 * a command pointer, and an optional data pointer. 134 */ 135 static int 136 mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) 137 { 138 struct mxsmmc_priv *priv = mmc->priv; 139 struct mxs_ssp_regs *ssp_regs = priv->regs; 140 uint32_t reg; 141 int timeout; 142 uint32_t ctrl0; 143 int ret; 144 145 debug("MMC%d: CMD%d\n", mmc->block_dev.devnum, cmd->cmdidx); 146 147 /* Check bus busy */ 148 timeout = MXSMMC_MAX_TIMEOUT; 149 while (--timeout) { 150 udelay(1000); 151 reg = readl(&ssp_regs->hw_ssp_status); 152 if (!(reg & 153 (SSP_STATUS_BUSY | SSP_STATUS_DATA_BUSY | 154 SSP_STATUS_CMD_BUSY))) { 155 break; 156 } 157 } 158 159 if (!timeout) { 160 printf("MMC%d: Bus busy timeout!\n", mmc->block_dev.devnum); 161 return TIMEOUT; 162 } 163 164 /* See if card is present */ 165 if (!mxsmmc_cd(priv)) { 166 printf("MMC%d: No card detected!\n", mmc->block_dev.devnum); 167 return NO_CARD_ERR; 168 } 169 170 /* Start building CTRL0 contents */ 171 ctrl0 = priv->buswidth; 172 173 /* Set up command */ 174 if (!(cmd->resp_type & MMC_RSP_CRC)) 175 ctrl0 |= SSP_CTRL0_IGNORE_CRC; 176 if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */ 177 ctrl0 |= SSP_CTRL0_GET_RESP; 178 if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */ 179 ctrl0 |= SSP_CTRL0_LONG_RESP; 180 181 if (data && (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER)) 182 writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr); 183 else 184 writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set); 185 186 /* Command index */ 187 reg = readl(&ssp_regs->hw_ssp_cmd0); 188 reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC); 189 reg |= cmd->cmdidx << SSP_CMD0_CMD_OFFSET; 190 if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) 191 reg |= SSP_CMD0_APPEND_8CYC; 192 writel(reg, &ssp_regs->hw_ssp_cmd0); 193 194 /* Command argument */ 195 writel(cmd->cmdarg, &ssp_regs->hw_ssp_cmd1); 196 197 /* Set up data */ 198 if (data) { 199 /* READ or WRITE */ 200 if (data->flags & MMC_DATA_READ) { 201 ctrl0 |= SSP_CTRL0_READ; 202 } else if (priv->mmc_is_wp && 203 priv->mmc_is_wp(mmc->block_dev.devnum)) { 204 printf("MMC%d: Can not write a locked card!\n", 205 mmc->block_dev.devnum); 206 return UNUSABLE_ERR; 207 } 208 209 ctrl0 |= SSP_CTRL0_DATA_XFER; 210 211 reg = data->blocksize * data->blocks; 212 #if defined(CONFIG_MX23) 213 ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK; 214 215 clrsetbits_le32(&ssp_regs->hw_ssp_cmd0, 216 SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK, 217 ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) | 218 ((ffs(data->blocksize) - 1) << 219 SSP_CMD0_BLOCK_SIZE_OFFSET)); 220 #elif defined(CONFIG_MX28) 221 writel(reg, &ssp_regs->hw_ssp_xfer_size); 222 223 reg = ((data->blocks - 1) << 224 SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) | 225 ((ffs(data->blocksize) - 1) << 226 SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET); 227 writel(reg, &ssp_regs->hw_ssp_block_size); 228 #endif 229 } 230 231 /* Kick off the command */ 232 ctrl0 |= SSP_CTRL0_WAIT_FOR_IRQ | SSP_CTRL0_ENABLE | SSP_CTRL0_RUN; 233 writel(ctrl0, &ssp_regs->hw_ssp_ctrl0); 234 235 /* Wait for the command to complete */ 236 timeout = MXSMMC_MAX_TIMEOUT; 237 while (--timeout) { 238 udelay(1000); 239 reg = readl(&ssp_regs->hw_ssp_status); 240 if (!(reg & SSP_STATUS_CMD_BUSY)) 241 break; 242 } 243 244 if (!timeout) { 245 printf("MMC%d: Command %d busy\n", 246 mmc->block_dev.devnum, cmd->cmdidx); 247 return TIMEOUT; 248 } 249 250 /* Check command timeout */ 251 if (reg & SSP_STATUS_RESP_TIMEOUT) { 252 printf("MMC%d: Command %d timeout (status 0x%08x)\n", 253 mmc->block_dev.devnum, cmd->cmdidx, reg); 254 return TIMEOUT; 255 } 256 257 /* Check command errors */ 258 if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) { 259 printf("MMC%d: Command %d error (status 0x%08x)!\n", 260 mmc->block_dev.devnum, cmd->cmdidx, reg); 261 return COMM_ERR; 262 } 263 264 /* Copy response to response buffer */ 265 if (cmd->resp_type & MMC_RSP_136) { 266 cmd->response[3] = readl(&ssp_regs->hw_ssp_sdresp0); 267 cmd->response[2] = readl(&ssp_regs->hw_ssp_sdresp1); 268 cmd->response[1] = readl(&ssp_regs->hw_ssp_sdresp2); 269 cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp3); 270 } else 271 cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp0); 272 273 /* Return if no data to process */ 274 if (!data) 275 return 0; 276 277 if (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER) { 278 ret = mxsmmc_send_cmd_pio(priv, data); 279 if (ret) { 280 printf("MMC%d: Data timeout with command %d " 281 "(status 0x%08x)!\n", 282 mmc->block_dev.devnum, cmd->cmdidx, reg); 283 return ret; 284 } 285 } else { 286 ret = mxsmmc_send_cmd_dma(priv, data); 287 if (ret) { 288 printf("MMC%d: DMA transfer failed\n", 289 mmc->block_dev.devnum); 290 return ret; 291 } 292 } 293 294 /* Check data errors */ 295 reg = readl(&ssp_regs->hw_ssp_status); 296 if (reg & 297 (SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR | 298 SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) { 299 printf("MMC%d: Data error with command %d (status 0x%08x)!\n", 300 mmc->block_dev.devnum, cmd->cmdidx, reg); 301 return COMM_ERR; 302 } 303 304 return 0; 305 } 306 307 static void mxsmmc_set_ios(struct mmc *mmc) 308 { 309 struct mxsmmc_priv *priv = mmc->priv; 310 struct mxs_ssp_regs *ssp_regs = priv->regs; 311 312 /* Set the clock speed */ 313 if (mmc->clock) 314 mxs_set_ssp_busclock(priv->id, mmc->clock / 1000); 315 316 switch (mmc->bus_width) { 317 case 1: 318 priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT; 319 break; 320 case 4: 321 priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT; 322 break; 323 case 8: 324 priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT; 325 break; 326 } 327 328 /* Set the bus width */ 329 clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0, 330 SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth); 331 332 debug("MMC%d: Set %d bits bus width\n", 333 mmc->block_dev.devnum, mmc->bus_width); 334 } 335 336 static int mxsmmc_init(struct mmc *mmc) 337 { 338 struct mxsmmc_priv *priv = mmc->priv; 339 struct mxs_ssp_regs *ssp_regs = priv->regs; 340 341 /* Reset SSP */ 342 mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); 343 344 /* Reconfigure the SSP block for MMC operation */ 345 writel(SSP_CTRL1_SSP_MODE_SD_MMC | 346 SSP_CTRL1_WORD_LENGTH_EIGHT_BITS | 347 SSP_CTRL1_DMA_ENABLE | 348 SSP_CTRL1_POLARITY | 349 SSP_CTRL1_RECV_TIMEOUT_IRQ_EN | 350 SSP_CTRL1_DATA_CRC_IRQ_EN | 351 SSP_CTRL1_DATA_TIMEOUT_IRQ_EN | 352 SSP_CTRL1_RESP_TIMEOUT_IRQ_EN | 353 SSP_CTRL1_RESP_ERR_IRQ_EN, 354 &ssp_regs->hw_ssp_ctrl1_set); 355 356 /* Set initial bit clock 400 KHz */ 357 mxs_set_ssp_busclock(priv->id, 400); 358 359 /* Send initial 74 clock cycles (185 us @ 400 KHz)*/ 360 writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set); 361 udelay(200); 362 writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr); 363 364 return 0; 365 } 366 367 static const struct mmc_ops mxsmmc_ops = { 368 .send_cmd = mxsmmc_send_cmd, 369 .set_ios = mxsmmc_set_ios, 370 .init = mxsmmc_init, 371 }; 372 373 int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) 374 { 375 struct mmc *mmc = NULL; 376 struct mxsmmc_priv *priv = NULL; 377 int ret; 378 const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id); 379 380 if (!mxs_ssp_bus_id_valid(id)) 381 return -ENODEV; 382 383 priv = malloc(sizeof(struct mxsmmc_priv)); 384 if (!priv) 385 return -ENOMEM; 386 387 priv->desc = mxs_dma_desc_alloc(); 388 if (!priv->desc) { 389 free(priv); 390 return -ENOMEM; 391 } 392 393 ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id); 394 if (ret) 395 return ret; 396 397 priv->mmc_is_wp = wp; 398 priv->mmc_cd = cd; 399 priv->id = id; 400 priv->regs = mxs_ssp_regs_by_bus(id); 401 402 priv->cfg.name = "MXS MMC"; 403 priv->cfg.ops = &mxsmmc_ops; 404 405 priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34; 406 407 priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | 408 MMC_MODE_HS_52MHz | MMC_MODE_HS; 409 410 /* 411 * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz 412 * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), 413 * CLOCK_DIVIDE has to be an even value from 2 to 254, and 414 * CLOCK_RATE could be any integer from 0 to 255. 415 */ 416 priv->cfg.f_min = 400000; 417 priv->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + mxsmmc_clk_id) * 1000 / 2; 418 priv->cfg.b_max = 0x20; 419 420 mmc = mmc_create(&priv->cfg, priv); 421 if (mmc == NULL) { 422 mxs_dma_desc_free(priv->desc); 423 free(priv); 424 return -ENOMEM; 425 } 426 return 0; 427 } 428